3 files changed, 87 insertions, 0 deletions
diff --git a/system/smartmontools/smartmontools-6.1-config.patch.xz b/system/smartmontools/smartmontools-6.1-config.patch.xz
new file mode 100644
index 0000000..413ec77
--- /dev/null
+++ b/system/smartmontools/smartmontools-6.1-config.patch.xz
diff --git a/system/smartmontools/smartmontools-6.1-service.patch.xz b/system/smartmontools/smartmontools-6.1-service.patch.xz
new file mode 100644
index 0000000..423ed05
--- /dev/null
+++ b/system/smartmontools/smartmontools-6.1-service.patch.xz
diff --git a/system/smartmontools/smartmontools.build b/system/smartmontools/smartmontools.build
new file mode 100755
index 0000000..48d5c46
--- /dev/null
+++ b/system/smartmontools/smartmontools.build
@@ -0,0 +1,87 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=smartmontools
+VERSION=6.1
+BUILD=1
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: smartmontools (hard drive monitoring utilities)
+${NAME}:
+${NAME}: Utilities that control and monitor storage devices using the
+${NAME}: Self-Monitoring, Analysis and Reporting Technology (S.M.A.R.T.)
+${NAME}: system built into ATA and SCSI Hard Drives. This is used to check
+${NAME}: the reliability of the hard drive and to predict drive failures.
+${NAME}:
+${NAME}: Homepage: http://smartmontools.sf.net
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/smart/smartd.conf.new
+config etc/conf.d/smartd.conf.new
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=${URL[sf]}/${SRCNAME[0]}/${SRCNAME[0]}/${SRCVERS[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}/smart" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-initscriptdir="no" \
+ --with-exampledir="${SYS_DIR[etc]}/smart/samples" \
+ --with-systemdsystemunitdir="${SYS_DIR[systemdsystemunitdir]}" \
+ --with-drivedbdir="${SYS_DIR[share]}/hwdata" \
+ --with-libcap-ng=yes \
+ --enable-drivedb
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS WARNINGS
+changelog NEWS
+install.dir ${PKG}${SYS_DIR[etc]}/conf.d
+install.cfg smartd.conf.d ${PKG}${SYS_DIR[etc]}/conf.d/smartd.conf.new
+config ${PKG}${SYS_DIR[etc]}/smart/smartd.conf
+rm -rf ${PKG}${SYS_DIR[doc]}/smartmontools
+}