From d150a5f3e462fa7fe194a805a4aa0076f4d03ab9 Mon Sep 17 00:00:00 2001
From: Deposite Pirate
Date: Sun, 16 Sep 2018 18:48:36 +0200
Subject: Add ports.

---
 base/power/power.build | 145 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 145 insertions(+)
 create mode 100755 base/power/power.build

(limited to 'base/power/power.build')

diff --git a/base/power/power.build b/base/power/power.build
new file mode 100755
index 0000000..f8a8215
--- /dev/null
+++ b/base/power/power.build
@@ -0,0 +1,145 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=power
+VERSION=0.9.19
+BUILD=2
+DEPENDS=('glib >= 2.34.3-1' 'dbus_glib >= 0.100.2-1' 'udev >= 173-1' 'polkit >= 0.105-1' 'usb >= 1.0.14-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: upower
+${NAME}:
+${NAME}: An abstraction for enumerating power devices, listening to device
+${NAME}: events and querying history and statistics. Any application or
+${NAME}: service on the system can access the org.freedesktop.UPower service
+${NAME}: via the system message bus. Some operations (such as suspending the
+${NAME}: system) are restricted using polkit. UPower is also useful to control
+${NAME}: the latency of different operations on your computer, which enables
+${NAME}: you to save significant amounts of power.
+${NAME}:
+${NAME}: Homepage: http://upower.freedesktop.org
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/UPower/UPower.conf.new
+EOF
+
+# Sources
+
+SRCNAME[0]=upower
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://upower.freedesktop.org/releases/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.in
+sed -i 's|$(slashlibdir)/udev/rules.d|$(datarootdir)/udev/rules|g' rules/Makefile.in
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --disable-rpath \
+ --enable-static=no \
+ --enable-shared=yes \
+ --enable-introspection=no \
+ --enable-man-pages=no \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --libexecdir="${SYS_DIR[lib]}/exec" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-html-dir="${SYS_DIR[html]}" \
+ --with-systemdsystemunitdir="${SYS_DIR[systemdsystemunitdir]}" \
+ --with-backend=linux
+#FIXME: systemd
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog NEWS
+config ${PKG}${SYS_DIR[etc]}/UPower/UPower.conf
+}
+
+SRCNAME[1]=cpufrequtils
+SRCVERS[1]=008
+SRCPACK[1]=http://www.kernel.org/pub/linux/utils/kernel/cpufreq/${SRCNAME[1]}-${SRCVERS[1]}.tar.bz2
+SRCCOPY[1]="GPL2"
+
+build1()
+{
+make ${JOBS} \
+ V="true" \
+ PROC="false" \
+ OPTIMIZATION="${FLAGS}"
+make install DESTDIR="${PKG}" libdir="${SYS_DIR[lib]}"
+doc AUTHORS
+rm -f ${PKG}${SYS_DIR[lib]}/*.a
+}
+
+SRCNAME[2]=pm-utils
+SRCVERS[2]=1.4.1
+SRCPACK[2]=http://pm-utils.freedesktop.org/releases/${SRCNAME[2]}-${SRCVERS[2]}.tar.gz
+SRCCOPY[2]="GPL2"
+
+PMUTILSLIBDIR=${SYS_DIR[share]}/pm-utils
+
+build2()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.in
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[share]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --docdir="${SYS_DIR[doc]}/${SRCNAME[2]}-${SRCVERS[2]}"
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS README.SLACKWARE
+changelog ChangeLog
+rm -f ${PKG}${PMUTILSLIBDIR}/{sleep.d/55NetworkManager,power.d/{harddrive,disable_wol,hal-cd-polling}}
+}
+
+SRCNAME[3]=pm-quirks
+SRCVERS[3]=20100619
+SRCPACK[3]=http://pm-utils.freedesktop.org/releases/${SRCNAME[3]}-${SRCVERS[3]}.tar.gz
+SRCROOT[3]=video-quirks
+
+build3()
+{
+install.dir ${PKG}${PMUTILSLIBDIR}/video-quirks
+install.dat *.quirkdb ${PKG}${PMUTILSLIBDIR}/video-quirks
+}
-- 
cgit v1.2.3-70-g09d2