From d150a5f3e462fa7fe194a805a4aa0076f4d03ab9 Mon Sep 17 00:00:00 2001
From: Deposite Pirate
Date: Sun, 16 Sep 2018 18:48:36 +0200
Subject: Add ports.

---
 compat/compat_lcms/compat_lcms.build               |  63 ++++++++++++
 compat/compat_libpng/compat_libpng.build           |  78 +++++++++++++++
 compat/compat_tcpip/compat_tcpip.build             |  61 ++++++++++++
 .../net-tools-20130121-config.patch.xz             | Bin 0 -> 2624 bytes
 .../net-tools-20130121-debian242.patch.xz          | Bin 0 -> 126504 bytes
 .../net-tools-20130121-install.patch.xz            | Bin 0 -> 1612 bytes
 .../net-tools-20130121-missingheaders.patch.xz     | Bin 0 -> 216 bytes
 compat/compat_wireless/compat_wireless.build       |  57 +++++++++++
 .../wireless_tools-30.pre9-nowhine.patch.xz        | Bin 0 -> 300 bytes
 .../wireless_tools-30.pre9-slackware.patch.xz      | Bin 0 -> 6988 bytes
 .../ConsoleKit-0.4.6-cleanupconsoletags.patch.xz   | Bin 0 -> 872 bytes
 compat/consolekit/ConsoleKit-0.4.6-libdir.patch.xz | Bin 0 -> 1016 bytes
 compat/consolekit/ConsoleKit-0.4.6-nopam.patch.xz  | Bin 0 -> 444 bytes
 compat/consolekit/ConsoleKit-0.4.6-revert.patch.xz | Bin 0 -> 2180 bytes
 compat/consolekit/ConsoleKit-0.4.6-rundir.patch.xz | Bin 0 -> 528 bytes
 .../consolekit/ConsoleKit-0.4.6-sysvinit.patch.xz  | Bin 0 -> 500 bytes
 .../consolekit/ConsoleKit-0.4.6-tmpfiles.patch.xz  | Bin 0 -> 256 bytes
 compat/consolekit/consolekit.build                 | 108 +++++++++++++++++++++
 compat/dbus_glib/dbus_glib.build                   |  67 +++++++++++++
 compat/gconf/GConf-3.2.6-reload.patch.xz           | Bin 0 -> 312 bytes
 compat/gconf/GConf-3.2.6-xmlgettextdomain.patch.xz | Bin 0 -> 3592 bytes
 compat/gconf/gconf.build                           |  83 ++++++++++++++++
 .../libunique/libunique-1.1.6-autostuff.patch.xz   | Bin 0 -> 146040 bytes
 .../libunique-1.1.6-gconstreturn.patch.xz          | Bin 0 -> 1072 bytes
 compat/libunique/libunique-1.1.6-gdbus.patch.xz    | Bin 0 -> 4548 bytes
 compat/libunique/libunique.build                   |  68 +++++++++++++
 compat/network_scripts/network_scripts.build       |  63 ++++++++++++
 compat/pkgtools/pkgtools-14.0-gtar.patch.xz        | Bin 0 -> 508 bytes
 compat/pkgtools/pkgtools.build                     |  82 ++++++++++++++++
 compat/pkgtools/tar-1.13-autostuff.patch.xz        | Bin 0 -> 23116 bytes
 compat/pkgtools/tar-1.13-bzip2.patch.xz            | Bin 0 -> 980 bytes
 compat/sysvinit/sysvinit-2.88dsf-install.patch.xz  | Bin 0 -> 528 bytes
 compat/sysvinit/sysvinit-2.88dsf-paths.patch.xz    | Bin 0 -> 416 bytes
 compat/sysvinit/sysvinit-2.88dsf-programs.patch.xz | Bin 0 -> 532 bytes
 .../sysvinit/sysvinit-2.88dsf-slackware.patch.xz   | Bin 0 -> 764 bytes
 compat/sysvinit/sysvinit.build                     |  62 ++++++++++++
 .../sysvinit-scripts-2.0-alsa.patch.xz             | Bin 0 -> 504 bytes
 .../sysvinit-scripts-2.0-slim.patch.xz             | Bin 0 -> 592 bytes
 .../sysvinit-scripts-2.0-tmpfilesd.patch.xz        | Bin 0 -> 1448 bytes
 .../sysvinit-scripts-2.0-tmpfilesscript.patch.xz   | Bin 0 -> 3520 bytes
 compat/sysvinit_scripts/sysvinit_scripts.build     |  73 ++++++++++++++
 41 files changed, 865 insertions(+)
 create mode 100755 compat/compat_lcms/compat_lcms.build
 create mode 100755 compat/compat_libpng/compat_libpng.build
 create mode 100755 compat/compat_tcpip/compat_tcpip.build
 create mode 100644 compat/compat_tcpip/net-tools-20130121-config.patch.xz
 create mode 100644 compat/compat_tcpip/net-tools-20130121-debian242.patch.xz
 create mode 100644 compat/compat_tcpip/net-tools-20130121-install.patch.xz
 create mode 100644 compat/compat_tcpip/net-tools-20130121-missingheaders.patch.xz
 create mode 100755 compat/compat_wireless/compat_wireless.build
 create mode 100644 compat/compat_wireless/wireless_tools-30.pre9-nowhine.patch.xz
 create mode 100644 compat/compat_wireless/wireless_tools-30.pre9-slackware.patch.xz
 create mode 100644 compat/consolekit/ConsoleKit-0.4.6-cleanupconsoletags.patch.xz
 create mode 100644 compat/consolekit/ConsoleKit-0.4.6-libdir.patch.xz
 create mode 100644 compat/consolekit/ConsoleKit-0.4.6-nopam.patch.xz
 create mode 100644 compat/consolekit/ConsoleKit-0.4.6-revert.patch.xz
 create mode 100644 compat/consolekit/ConsoleKit-0.4.6-rundir.patch.xz
 create mode 100644 compat/consolekit/ConsoleKit-0.4.6-sysvinit.patch.xz
 create mode 100644 compat/consolekit/ConsoleKit-0.4.6-tmpfiles.patch.xz
 create mode 100755 compat/consolekit/consolekit.build
 create mode 100755 compat/dbus_glib/dbus_glib.build
 create mode 100644 compat/gconf/GConf-3.2.6-reload.patch.xz
 create mode 100644 compat/gconf/GConf-3.2.6-xmlgettextdomain.patch.xz
 create mode 100755 compat/gconf/gconf.build
 create mode 100644 compat/libunique/libunique-1.1.6-autostuff.patch.xz
 create mode 100644 compat/libunique/libunique-1.1.6-gconstreturn.patch.xz
 create mode 100644 compat/libunique/libunique-1.1.6-gdbus.patch.xz
 create mode 100755 compat/libunique/libunique.build
 create mode 100755 compat/network_scripts/network_scripts.build
 create mode 100644 compat/pkgtools/pkgtools-14.0-gtar.patch.xz
 create mode 100755 compat/pkgtools/pkgtools.build
 create mode 100644 compat/pkgtools/tar-1.13-autostuff.patch.xz
 create mode 100644 compat/pkgtools/tar-1.13-bzip2.patch.xz
 create mode 100644 compat/sysvinit/sysvinit-2.88dsf-install.patch.xz
 create mode 100644 compat/sysvinit/sysvinit-2.88dsf-paths.patch.xz
 create mode 100644 compat/sysvinit/sysvinit-2.88dsf-programs.patch.xz
 create mode 100644 compat/sysvinit/sysvinit-2.88dsf-slackware.patch.xz
 create mode 100755 compat/sysvinit/sysvinit.build
 create mode 100644 compat/sysvinit_scripts/sysvinit-scripts-2.0-alsa.patch.xz
 create mode 100644 compat/sysvinit_scripts/sysvinit-scripts-2.0-slim.patch.xz
 create mode 100644 compat/sysvinit_scripts/sysvinit-scripts-2.0-tmpfilesd.patch.xz
 create mode 100644 compat/sysvinit_scripts/sysvinit-scripts-2.0-tmpfilesscript.patch.xz
 create mode 100755 compat/sysvinit_scripts/sysvinit_scripts.build

(limited to 'compat')

diff --git a/compat/compat_lcms/compat_lcms.build b/compat/compat_lcms/compat_lcms.build
new file mode 100755
index 0000000..2a7cb42
--- /dev/null
+++ b/compat/compat_lcms/compat_lcms.build
@@ -0,0 +1,63 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=compat_lcms
+VERSION=1.19
+BUILD=2
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: compat_lcms (Little Color Management System)
+${NAME}:
+${NAME}: Little CMS intends to be a small-footprint, speed optimized color
+${NAME}: management engine in open source form. This version of liblcms is
+${NAME}: obsolete. Please use liblcms 2 instead.
+${NAME}:
+${NAME}: Homepage: http://www.littlecms.com
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=lcms
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://www.littlecms.com/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+
+build0()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.{in,am}
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --includedir="${SYS_DIR[include]}/lcms-1.0/lcms" \
+ --localstatedir="${SYS_DIR[var]}"
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog NEWS
+rm -rf \
+ ${PKG}${SYS_DIR[bin]} \
+ ${PKG}${SYS_DIR[man]}
+}
diff --git a/compat/compat_libpng/compat_libpng.build b/compat/compat_libpng/compat_libpng.build
new file mode 100755
index 0000000..a3e44f5
--- /dev/null
+++ b/compat/compat_libpng/compat_libpng.build
@@ -0,0 +1,78 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=compat_libpng
+VERSION=1.4.8
+BUILD=1
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: libpng (Portable Network Graphics library)
+${NAME}:
+${NAME}: PNG (Portable Network Graphics) is an extensible file format for the
+${NAME}: lossless, portable, well-compressed storage of raster images. PNG
+${NAME}: provides a patent-free replacement for GIF and can also replace many
+${NAME}: common uses of TIFF. Indexed-color, grayscale, and truecolor images
+${NAME}: are supported, plus an optional alpha channel. Sample depths range
+${NAME}: from 1 to 16 bits. This version of libpng is obsolete.
+${NAME}:
+${NAME}: Homepage: http://www.libpng.org
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=libpng
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=ftp://ftp.simplesystems.org/pub/libpng/png/src/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+
+build0()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix=/usr \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir=/etc \
+ --libdir=/usr/lib$(libdirsuffix) \
+ --localstatedir=/var
+make ${JOBS} \
+ prefix=/usr \
+ LIBPATH=/usr/lib$(libdirsuffix) \
+ ZLIBLIB="-L/usr/lib$(libdirsuffix) -lm -lz"
+make install DESTDIR="${PKG}" \
+ prefix=/usr \
+ LIBPATH=/usr/lib$(libdirsuffix) \
+ ZLIBLIB="-L/usr/lib$(libdirsuffix) -lm -lz"
+changelog CHANGES
+license LICENSE
+# A symlink survives...
+rm -rf \
+ ${PKG}${SYS_DIR[man]} \
+ ${PKG}/usr/include/*.h \
+ ${PKG}/usr/bin/libpng-config \
+ ${PKG}/usr/lib$(libdirsuffix)/pkgconfig/libpng.pc \
+ ${PKG}/usr/lib$(libdirsuffix)/*.la
+# More compat
+(
+  cd ${PKG}/usr/lib$(libdirsuffix)
+  if [ ! -e libpng.so.14 -a -e libpng14.so.14 ]; then
+    ln -sf libpng14.so.14 libpng.so.14
+  fi
+)
+}
diff --git a/compat/compat_tcpip/compat_tcpip.build b/compat/compat_tcpip/compat_tcpip.build
new file mode 100755
index 0000000..cd5eb55
--- /dev/null
+++ b/compat/compat_tcpip/compat_tcpip.build
@@ -0,0 +1,61 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=compat_tcpip
+VERSION=$(date '+%Y%m%d')
+BUILD=1
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: compat_tcpip
+${NAME}:
+${NAME}: Deprecated TCP/IP utilities.
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=net-tools
+SRCVERS[0]=20130121
+SRCPACK[0]=http://www.tazenda.demon.co.uk/phil/${SRCNAME[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+
+build0()
+{
+make version.h
+make ${JOBS} CFLAGS="${FLAGS}"
+make install-base \
+ DESTDIR="${PKG}" \
+ MANDIR="${SYS_DIR[man]}" \
+ BINDIR="${SYS_DIR[bin]}" \
+ SBINDIR="${SYS_DIR[sbin]}"
+#FIXME: compatibility symlinks
+install.dir ${PKG}/sbin
+(
+  cd ${PKG}/sbin
+  ln -sf ${SYS_DIR[sbin]}/arp
+  ln -sf ${SYS_DIR[sbin]}/rarp
+  ln -sf ${SYS_DIR[sbin]}/ifconfig
+  ln -sf ${SYS_DIR[sbin]}/route
+  ln -sf ${SYS_DIR[sbin]}/ipmaddr
+  ln -sf ${SYS_DIR[sbin]}/iptunnel
+)
+}
diff --git a/compat/compat_tcpip/net-tools-20130121-config.patch.xz b/compat/compat_tcpip/net-tools-20130121-config.patch.xz
new file mode 100644
index 0000000..9683ffa
Binary files /dev/null and b/compat/compat_tcpip/net-tools-20130121-config.patch.xz differ
diff --git a/compat/compat_tcpip/net-tools-20130121-debian242.patch.xz b/compat/compat_tcpip/net-tools-20130121-debian242.patch.xz
new file mode 100644
index 0000000..a544220
Binary files /dev/null and b/compat/compat_tcpip/net-tools-20130121-debian242.patch.xz differ
diff --git a/compat/compat_tcpip/net-tools-20130121-install.patch.xz b/compat/compat_tcpip/net-tools-20130121-install.patch.xz
new file mode 100644
index 0000000..0fd2fd2
Binary files /dev/null and b/compat/compat_tcpip/net-tools-20130121-install.patch.xz differ
diff --git a/compat/compat_tcpip/net-tools-20130121-missingheaders.patch.xz b/compat/compat_tcpip/net-tools-20130121-missingheaders.patch.xz
new file mode 100644
index 0000000..ee76a47
Binary files /dev/null and b/compat/compat_tcpip/net-tools-20130121-missingheaders.patch.xz differ
diff --git a/compat/compat_wireless/compat_wireless.build b/compat/compat_wireless/compat_wireless.build
new file mode 100755
index 0000000..1b81b9d
--- /dev/null
+++ b/compat/compat_wireless/compat_wireless.build
@@ -0,0 +1,57 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=compat_wireless
+VERSION=30pre7
+BUILD=6
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: wireless_tools (utilities for wireless networking)
+${NAME}:
+${NAME}: This package contains tools and a library used for configuring
+${NAME}: wireless networking interfaces:
+${NAME}:   iwconfig (the main wireless tool), iwlist (display more detailed
+${NAME}:   information than iwconfig), iwspy (get stats per MAC address and
+${NAME}:   more), iwpriv (set driver private ioctls), iwgetid (show the ESSID
+${NAME}:   or NWID of a device), iwevent (display wireless events), ifrename
+${NAME}:   (rename a network interface).
+${NAME}:
+${NAME}: These tools are obsolete and are replaced by 'iw'.
+EOF
+
+# Sources
+
+SRCNAME[0]=wireless_tools
+SRCVERS[0]=30.pre9
+SRCROOT[0]=${SRCNAME[0]}.30
+SRCPACK[0]=http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/${SRCNAME[0]}.${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+make ${JOBS} CFLAGS="${FLAGS}" PREFIX="/usr"
+make install \
+ PREFIX="${PKG}/usr" \
+ INSTALL_DIR="${PKG}/usr/sbin" \
+ INSTALL_LIB="${PKG}/usr/lib$(libdirsuffix)"
+install.dat doinst.sh ${PKG}/install
+install.dir ${PKG}/etc/rc.d
+install.bin rc.wireless ${PKG}/etc/rc.d/rc.wireless.new
+install -m 0600 rc.wireless.conf ${PKG}/etc/rc.d/rc.wireless.conf.new
+# Don't include man pages in other languages
+rm -rf \
+ ${PKG}${SYS_DIR[man]}/{cs,fr.ISO8859-1,fr.UTF-8}
+}
diff --git a/compat/compat_wireless/wireless_tools-30.pre9-nowhine.patch.xz b/compat/compat_wireless/wireless_tools-30.pre9-nowhine.patch.xz
new file mode 100644
index 0000000..d1424e3
Binary files /dev/null and b/compat/compat_wireless/wireless_tools-30.pre9-nowhine.patch.xz differ
diff --git a/compat/compat_wireless/wireless_tools-30.pre9-slackware.patch.xz b/compat/compat_wireless/wireless_tools-30.pre9-slackware.patch.xz
new file mode 100644
index 0000000..4713944
Binary files /dev/null and b/compat/compat_wireless/wireless_tools-30.pre9-slackware.patch.xz differ
diff --git a/compat/consolekit/ConsoleKit-0.4.6-cleanupconsoletags.patch.xz b/compat/consolekit/ConsoleKit-0.4.6-cleanupconsoletags.patch.xz
new file mode 100644
index 0000000..9f16d3a
Binary files /dev/null and b/compat/consolekit/ConsoleKit-0.4.6-cleanupconsoletags.patch.xz differ
diff --git a/compat/consolekit/ConsoleKit-0.4.6-libdir.patch.xz b/compat/consolekit/ConsoleKit-0.4.6-libdir.patch.xz
new file mode 100644
index 0000000..29cc81b
Binary files /dev/null and b/compat/consolekit/ConsoleKit-0.4.6-libdir.patch.xz differ
diff --git a/compat/consolekit/ConsoleKit-0.4.6-nopam.patch.xz b/compat/consolekit/ConsoleKit-0.4.6-nopam.patch.xz
new file mode 100644
index 0000000..b6bce05
Binary files /dev/null and b/compat/consolekit/ConsoleKit-0.4.6-nopam.patch.xz differ
diff --git a/compat/consolekit/ConsoleKit-0.4.6-revert.patch.xz b/compat/consolekit/ConsoleKit-0.4.6-revert.patch.xz
new file mode 100644
index 0000000..6e6a08b
Binary files /dev/null and b/compat/consolekit/ConsoleKit-0.4.6-revert.patch.xz differ
diff --git a/compat/consolekit/ConsoleKit-0.4.6-rundir.patch.xz b/compat/consolekit/ConsoleKit-0.4.6-rundir.patch.xz
new file mode 100644
index 0000000..08ee732
Binary files /dev/null and b/compat/consolekit/ConsoleKit-0.4.6-rundir.patch.xz differ
diff --git a/compat/consolekit/ConsoleKit-0.4.6-sysvinit.patch.xz b/compat/consolekit/ConsoleKit-0.4.6-sysvinit.patch.xz
new file mode 100644
index 0000000..1ea0fdb
Binary files /dev/null and b/compat/consolekit/ConsoleKit-0.4.6-sysvinit.patch.xz differ
diff --git a/compat/consolekit/ConsoleKit-0.4.6-tmpfiles.patch.xz b/compat/consolekit/ConsoleKit-0.4.6-tmpfiles.patch.xz
new file mode 100644
index 0000000..11b9d76
Binary files /dev/null and b/compat/consolekit/ConsoleKit-0.4.6-tmpfiles.patch.xz differ
diff --git a/compat/consolekit/consolekit.build b/compat/consolekit/consolekit.build
new file mode 100755
index 0000000..80ffd91
--- /dev/null
+++ b/compat/consolekit/consolekit.build
@@ -0,0 +1,108 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=consolekit
+VERSION=0.4.6
+BUILD=5
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: consolekit (user, login, and seat tracking framework)
+${NAME}:
+${NAME}: ConsoleKit is a framework for defining and tracking users, login
+${NAME}: sessions, and seats.
+${NAME}:
+${NAME}: Homepage: http://freedesktop.org/wiki/Software/ConsoleKit
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+preserve_perms() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  if [ -e \$OLD ]; then
+    cp -a \$OLD \${NEW}.incoming
+    cat \$NEW > \${NEW}.incoming
+    mv \${NEW}.incoming \$NEW
+  fi
+  config \$NEW
+}
+
+config etc/ConsoleKit/seats.d/00-primary.seat.new
+preserve_perms etc/rc.d/rc.consolekit.new
+EOF
+
+# Sources
+
+SRCNAME[0]=ConsoleKit
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://www.freedesktop.org/software/ConsoleKit/dist/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' libck-connector/Makefile.in
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --libexecdir="${SYS_DIR[lib]}/exec" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-pid-file="${SYS_DIR[run]}/consolekit/pid" \
+ --without-systemdsystemunitdir \
+ --enable-pam-module=no
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog NEWS
+install.dir ${PKG}${SYS_DIR[etc]}/{rc.d,tmpfiles.d}
+install.bin rc.consolekit.new ${PKG}${SYS_DIR[etc]}/rc.d
+install.dat consolekit.conf.tmpfiles ${PKG}${SYS_DIR[etc]}/tmpfiles.d/consolekit.conf
+install.dir ${PKG}${SYS_DIR[share]}/ConsoleKit/run-session.d
+install.bin pam-foreground-compat.ck ${PKG}${SYS_DIR[share]}/ConsoleKit/run-session.d
+config ${PKG}${SYS_DIR[etc]}/ConsoleKit/seats.d/00-primary.seat
+mv \
+ ${PKG}${SYS_DIR[etc]}/dbus-1/system.d/ConsoleKit.conf \
+ ${PKG}${SYS_DIR[etc]}/dbus-1/system.d/org.freedesktop.ConsoleKit.conf
+rm -rf \
+ ${PKG}${SYS_DIR[var]}/run
+# ${PKG}${SYS_DIR[man]}
+}
diff --git a/compat/dbus_glib/dbus_glib.build b/compat/dbus_glib/dbus_glib.build
new file mode 100755
index 0000000..43c5ce2
--- /dev/null
+++ b/compat/dbus_glib/dbus_glib.build
@@ -0,0 +1,67 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=dbus_glib
+VERSION=0.100.2
+BUILD=1
+DEPENDS=('dbus >= 1.4.24-1' 'glib >= 2.34.3-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: D-BUS Glib
+${NAME}:
+${NAME}: D-BUS bindings for Glib. These are deprecated and replaced by gdbus
+${NAME}: which is part of Glib.
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=dbus-glib
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://dbus.freedesktop.org/releases/${SRCNAME[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="GPL2 AFL21"
+
+build0()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.in
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --libexecdir="${SYS_DIR[lib]}/exec" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-html-dir="${SYS_DIR[html]}" \
+ --enable-bash-completion=no
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog ChangeLog
+# No development docs
+rm -rf ${PKG}${SYS_DIR[html]}
+}
diff --git a/compat/gconf/GConf-3.2.6-reload.patch.xz b/compat/gconf/GConf-3.2.6-reload.patch.xz
new file mode 100644
index 0000000..5215ee9
Binary files /dev/null and b/compat/gconf/GConf-3.2.6-reload.patch.xz differ
diff --git a/compat/gconf/GConf-3.2.6-xmlgettextdomain.patch.xz b/compat/gconf/GConf-3.2.6-xmlgettextdomain.patch.xz
new file mode 100644
index 0000000..4af6c59
Binary files /dev/null and b/compat/gconf/GConf-3.2.6-xmlgettextdomain.patch.xz differ
diff --git a/compat/gconf/gconf.build b/compat/gconf/gconf.build
new file mode 100755
index 0000000..90dc67a
--- /dev/null
+++ b/compat/gconf/gconf.build
@@ -0,0 +1,83 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=gconf
+VERSION=3.2.6
+BUILD=1
+DEPENDS=('glib >= 2.34.3-1' 'dbus_glib >= 0.100.2-1' 'libxml >= 2.9.0-1' 'policykit >= 0.105-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: gconf
+${NAME}:
+${NAME}: GConf is a configuration database system. It is deprecated and
+${NAME}: provided only for compatibility with applications such as Google
+${NAME}: Chrome. GSettings and dconf should be used to create new
+${NAME}: applications.
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+export GIO_MODULE_DIR="${SYS_DIR[lib]}/plugins/gio-2.0"
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+# Add the gtk+ modules to the cache
+
+if [ -x ${SYS_DIR[bin]}/gio-querymodules ]; then
+  ${SYS_DIR[bin]}/gio-querymodules ${GIO_MODULE_DIR}
+fi
+EOF
+
+# Sources
+
+SRCNAME[0]=GConf
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=${URL[gnome]}/${SRCNAME[0]}/${SRCVERS[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+SRCCOPY[0]="LGPL2"
+
+build0()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.in
+sed -i 's|pkglibdir = $(libdir)/@PACKAGE@|pkglibdir = $(libdir)/plugins/@PACKAGE@|g' Makefile.in */Makefile.in */*/Makefile.in
+sed -i 's|GIO_MODULE_DIR=$libdir/gio/modules|GIO_MODULE_DIR=$libdir/plugins/gio-2.0|g' configure
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --enable-static=no \
+ --enable-shared=yes \
+ --enable-debug=minimum \
+ --enable-introspection=no \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --libexecdir="${SYS_DIR[lib]}/exec" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-html-dir="${SYS_DIR[html]}" \
+ --with-openldap=no \
+ --with-gtk=2.0 \
+ --disable-orbit
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog NEWS
+# No development docs
+rm -rf ${PKG}${SYS_DIR[html]}
+}
diff --git a/compat/libunique/libunique-1.1.6-autostuff.patch.xz b/compat/libunique/libunique-1.1.6-autostuff.patch.xz
new file mode 100644
index 0000000..f25ccd2
Binary files /dev/null and b/compat/libunique/libunique-1.1.6-autostuff.patch.xz differ
diff --git a/compat/libunique/libunique-1.1.6-gconstreturn.patch.xz b/compat/libunique/libunique-1.1.6-gconstreturn.patch.xz
new file mode 100644
index 0000000..3d42901
Binary files /dev/null and b/compat/libunique/libunique-1.1.6-gconstreturn.patch.xz differ
diff --git a/compat/libunique/libunique-1.1.6-gdbus.patch.xz b/compat/libunique/libunique-1.1.6-gdbus.patch.xz
new file mode 100644
index 0000000..cd73c42
Binary files /dev/null and b/compat/libunique/libunique-1.1.6-gdbus.patch.xz differ
diff --git a/compat/libunique/libunique.build b/compat/libunique/libunique.build
new file mode 100755
index 0000000..b5e6bbf
--- /dev/null
+++ b/compat/libunique/libunique.build
@@ -0,0 +1,68 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=libunique
+MAJOR=1.1
+VERSION=${MAJOR}.6
+BUILD=2
+DEPENDS=('gtk+ >= 2.24.14-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: libunique
+${NAME}:
+${NAME}: LibUnique is a library for writing single instance applications, that
+${NAME}: is applications that are run once and every further call to the same
+${NAME}: binary either exits immediately or sends a command to the running
+${NAME}: instance.
+${NAME}:
+${NAME}: Homepage: http://live.gnome.org/LibUnique
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=${URL[gnome]}/${SRCNAME[0]}/${MAJOR}/${SRCNAME[0]}-${SRCVERS[0]}.tar.bz2
+SRCCOPY[0]="LGPL21"
+
+build0()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.in
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --enable-maintainer-flags=no \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-html-dir="${SYS_DIR[html]}" \
+ --disable-dbus
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog NEWS
+# No development docs
+rm -rf ${PKG}${SYS_DIR[html]}
+}
diff --git a/compat/network_scripts/network_scripts.build b/compat/network_scripts/network_scripts.build
new file mode 100755
index 0000000..c432616
--- /dev/null
+++ b/compat/network_scripts/network_scripts.build
@@ -0,0 +1,63 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=network_scripts
+VERSION=14.00
+BUILD=1
+ARCH=noarch
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: network-scripts (Scripts to configure a network)
+${NAME}:
+${NAME}: These are the basic scripts and files used to define a network and
+${NAME}: configure network interfaces on Linux. Most of the original /etc
+${NAME}: files were written by Fred N. van Kempen, or borrowed from BSD. The
+${NAME}: rc.inet1 and rc.inet2 scripts were mostly written by Patrick
+${NAME}: Volkerding, with suggestions and fixes from hundreds of contributors
+${NAME}: over the years.
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=network-scripts
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+
+build0()
+{
+make install SBINDIR="/usr/sbin" DESTDIR="${PKG}"
+install.dat doinst.sh ${PKG}/install
+for file in \
+ etc/HOSTNAME \
+ etc/host.conf \
+ etc/hosts \
+ etc/hosts.allow \
+ etc/hosts.deny \
+ etc/hosts.equiv \
+ etc/networks \
+ etc/protocols \
+ etc/nntpserver \
+ etc/resolv.conf \
+ etc/rc.d/rc.inet1.conf \
+ etc/rc.d/rc.inet1 \
+ etc/rc.d/rc.inet2 \
+ etc/rc.d/rc.ip_forward; do
+  mv ${PKG}/${file} ${PKG}/${file}.new
+done
+}
diff --git a/compat/pkgtools/pkgtools-14.0-gtar.patch.xz b/compat/pkgtools/pkgtools-14.0-gtar.patch.xz
new file mode 100644
index 0000000..5497241
Binary files /dev/null and b/compat/pkgtools/pkgtools-14.0-gtar.patch.xz differ
diff --git a/compat/pkgtools/pkgtools.build b/compat/pkgtools/pkgtools.build
new file mode 100755
index 0000000..07b4a78
--- /dev/null
+++ b/compat/pkgtools/pkgtools.build
@@ -0,0 +1,82 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=pkgtools
+VERSION=14.0
+BUILD=2
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: pkgtools (The Slackware package maintenance system)
+${NAME}:
+${NAME}: This package contains utilities for handling Slackware packages.
+${NAME}: Included are the command line utilities 'installpkg', 'removepkg',
+${NAME}: 'makepkg', 'explodepkg', and 'upgradepkg' that install, remove,
+${NAME}: build, examine, and upgrade software packages. Also included are
+${NAME}: 'pkgtool', a menu based program for installing packages, removing
+${NAME}: packages, or viewing the packages that are installed on the system,
+${NAME}: documentation (man pages), and a few other system admin scripts.
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+
+build0()
+{
+make install DESTDIR="${PKG}"
+#FIXME: compat
+install.dir ${PKG}/sbin
+(
+  cd ${PKG}/sbin
+  ln -sf ${SYS_DIR[sbin]}/makebootdisk
+  ln -sf ${SYS_DIR[sbin]}/makepkg
+  ln -sf ${SYS_DIR[sbin]}/removepkg
+  ln -sf ${SYS_DIR[sbin]}/installpkg
+  ln -sf ${SYS_DIR[sbin]}/explodepkg
+  ln -sf ${SYS_DIR[sbin]}/pkgtool
+  ln -sf ${SYS_DIR[sbin]}/upgradepkg
+)
+}
+
+SRCNAME[1]=tar
+SRCVERS[1]=1.13
+SRCPACK[1]=${URL[gnu]}/${SRCNAME[1]}/${SRCNAME[1]}-${SRCVERS[1]}.tar.gz
+SRCCOPY[1]="GPL2"
+
+build1()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-nls \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --infodir="${SYS_DIR[info]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --program-prefix="g" \
+ --program-suffix="-${SRCVERS[1]}"
+make ${JOBS} V=1
+install.dir ${PKG}${SYS_DIR[bin]}
+install.bin src/tar ${PKG}${SYS_DIR[bin]}/gtar-${SRCVERS[1]}
+install.dir ${PKG}${SYS_DIR[man]}/man1
+echo ".so man1/gtar.1" > ${PKG}${SYS_DIR[man]}/man1/gtar-${SRCVERS[1]}.1
+}
diff --git a/compat/pkgtools/tar-1.13-autostuff.patch.xz b/compat/pkgtools/tar-1.13-autostuff.patch.xz
new file mode 100644
index 0000000..74894ed
Binary files /dev/null and b/compat/pkgtools/tar-1.13-autostuff.patch.xz differ
diff --git a/compat/pkgtools/tar-1.13-bzip2.patch.xz b/compat/pkgtools/tar-1.13-bzip2.patch.xz
new file mode 100644
index 0000000..dd8bdeb
Binary files /dev/null and b/compat/pkgtools/tar-1.13-bzip2.patch.xz differ
diff --git a/compat/sysvinit/sysvinit-2.88dsf-install.patch.xz b/compat/sysvinit/sysvinit-2.88dsf-install.patch.xz
new file mode 100644
index 0000000..185808a
Binary files /dev/null and b/compat/sysvinit/sysvinit-2.88dsf-install.patch.xz differ
diff --git a/compat/sysvinit/sysvinit-2.88dsf-paths.patch.xz b/compat/sysvinit/sysvinit-2.88dsf-paths.patch.xz
new file mode 100644
index 0000000..09bc2d1
Binary files /dev/null and b/compat/sysvinit/sysvinit-2.88dsf-paths.patch.xz differ
diff --git a/compat/sysvinit/sysvinit-2.88dsf-programs.patch.xz b/compat/sysvinit/sysvinit-2.88dsf-programs.patch.xz
new file mode 100644
index 0000000..cab23b9
Binary files /dev/null and b/compat/sysvinit/sysvinit-2.88dsf-programs.patch.xz differ
diff --git a/compat/sysvinit/sysvinit-2.88dsf-slackware.patch.xz b/compat/sysvinit/sysvinit-2.88dsf-slackware.patch.xz
new file mode 100644
index 0000000..873068a
Binary files /dev/null and b/compat/sysvinit/sysvinit-2.88dsf-slackware.patch.xz differ
diff --git a/compat/sysvinit/sysvinit.build b/compat/sysvinit/sysvinit.build
new file mode 100755
index 0000000..78cc210
--- /dev/null
+++ b/compat/sysvinit/sysvinit.build
@@ -0,0 +1,62 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=sysvinit
+VERSION=2.88dsf
+BUILD=1
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: sysvinit (init, the parent of all processes)
+${NAME}:
+${NAME}: System V style init programs by Miquel van Smoorenburg that control
+${NAME}: the booting and shutdown of your system. These support a number of
+${NAME}: system runlevels, each with a specific set of utilities spawned.
+${NAME}: For example, the normal system runlevel is 3, which starts agetty
+${NAME}: on virtual consoles tty1 - tty6.  Runlevel 4 starts xdm.
+${NAME}: Runlevel 0 shuts the system down.
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://download.savannah.gnu.org/releases/sysvinit/${SRCNAME[0]}-${SRCVERS[0]}.tar.bz2
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+make ${JOBS} CFLAGS="${FLAGS}"
+make install ROOT="${PKG}" MANDIR="${SYS_DIR[man]}"
+doc src/initscript.sample
+changelog doc/Changelog
+install.dat doinst.sh ${PKG}/install
+mv ${PKG}/usr/sbin/init ${PKG}/usr/sbin/init.new
+#FIXME: compat
+(
+install.dir ${PKG}/sbin
+cd ${PKG}/sbin
+for program in bootlogd halt init killall5 shutdown runlevel; do
+  ln -sf /usr/sbin/${program}
+done
+ln -sf /usr/sbin/init telinit
+ln -sf /usr/sbin/halt reboot
+ln -sf /usr/sbin/halt poweroff
+ln -sf /usr/sbin/killall5 pidof
+)
+}
diff --git a/compat/sysvinit_scripts/sysvinit-scripts-2.0-alsa.patch.xz b/compat/sysvinit_scripts/sysvinit-scripts-2.0-alsa.patch.xz
new file mode 100644
index 0000000..9d77a89
Binary files /dev/null and b/compat/sysvinit_scripts/sysvinit-scripts-2.0-alsa.patch.xz differ
diff --git a/compat/sysvinit_scripts/sysvinit-scripts-2.0-slim.patch.xz b/compat/sysvinit_scripts/sysvinit-scripts-2.0-slim.patch.xz
new file mode 100644
index 0000000..d3819b6
Binary files /dev/null and b/compat/sysvinit_scripts/sysvinit-scripts-2.0-slim.patch.xz differ
diff --git a/compat/sysvinit_scripts/sysvinit-scripts-2.0-tmpfilesd.patch.xz b/compat/sysvinit_scripts/sysvinit-scripts-2.0-tmpfilesd.patch.xz
new file mode 100644
index 0000000..803c030
Binary files /dev/null and b/compat/sysvinit_scripts/sysvinit-scripts-2.0-tmpfilesd.patch.xz differ
diff --git a/compat/sysvinit_scripts/sysvinit-scripts-2.0-tmpfilesscript.patch.xz b/compat/sysvinit_scripts/sysvinit-scripts-2.0-tmpfilesscript.patch.xz
new file mode 100644
index 0000000..95878cd
Binary files /dev/null and b/compat/sysvinit_scripts/sysvinit-scripts-2.0-tmpfilesscript.patch.xz differ
diff --git a/compat/sysvinit_scripts/sysvinit_scripts.build b/compat/sysvinit_scripts/sysvinit_scripts.build
new file mode 100755
index 0000000..4207c2d
--- /dev/null
+++ b/compat/sysvinit_scripts/sysvinit_scripts.build
@@ -0,0 +1,73 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=sysvinit_scripts
+MAJOR=2.0
+VERSION=${MAJOR}
+BUILD=4
+ARCH=noarch
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: sysvinit_scripts (basic scripts used to boot your machine)
+${NAME}:
+${NAME}: These are the Slackware boot scripts, which are needed to start the
+${NAME}: machine when not using systemd. Sysvinit looks for these in
+${NAME}: /etc/rc.d/.
+${NAME}: 
+${NAME}: This package is obsolete and has been replaced by systemd.
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/inittab.new
+config etc/rc.d/rc.4.new
+config etc/rc.d/rc.6.new
+config etc/rc.d/rc.K.new
+config etc/rc.d/rc.M.new
+config etc/rc.d/rc.S.new
+config etc/rc.d/rc.local.new
+config etc/rc.d/rc.loop.new
+config etc/rc.d/rc.sysvinit.new
+EOF
+
+# Sources
+
+SRCNAME[0]=sysvinit-scripts
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+
+build0()
+{
+make install DESTDIR="${PKG}"
+}
-- 
cgit v1.2.3-70-g09d2