From d150a5f3e462fa7fe194a805a4aa0076f4d03ab9 Mon Sep 17 00:00:00 2001
From: Deposite Pirate
Date: Sun, 16 Sep 2018 18:48:36 +0200
Subject: Add ports.

---
 games/bsd_games/bsd-games-2.17-64bit.patch.xz      | Bin 0 -> 764 bytes
 .../bsd-games-2.17-acronymlocation.patch.xz        | Bin 0 -> 408 bytes
 .../bsd_games/bsd-games-2.17-badntohlcast.patch.xz | Bin 0 -> 284 bytes
 games/bsd_games/bsd-games-2.17-config.patch.xz     | Bin 0 -> 424 bytes
 .../bsd-games-2.17-extrafortunes.patch.xz          | Bin 0 -> 293644 bytes
 ...d-games-2.17-fortunequotetypos20120302.patch.xz | Bin 0 -> 360 bytes
 .../bsd_games/bsd-games-2.17-gamescreenh.patch.xz  | Bin 0 -> 344 bytes
 games/bsd_games/bsd-games-2.17-gcc4fix.patch.xz    | Bin 0 -> 456 bytes
 games/bsd_games/bsd-games-2.17-getline.patch.xz    | Bin 0 -> 1828 bytes
 .../bsd_games/bsd-games-2.17-hangmanwords.patch.xz | Bin 0 -> 86716 bytes
 .../bsd_games/bsd-games-2.17-loginfortune.patch.xz | Bin 0 -> 380 bytes
 games/bsd_games/bsd-games-2.17-nullcheck.patch.xz  | Bin 0 -> 356 bytes
 games/bsd_games/bsd-games-2.17-numberc.patch.xz    | Bin 0 -> 1020 bytes
 games/bsd_games/bsd-games-2.17-ospeed.patch.xz     | Bin 0 -> 312 bytes
 games/bsd_games/bsd-games-2.17-pom.patch.xz        | Bin 0 -> 1968 bytes
 games/bsd_games/bsd-games-2.17-spelling.patch.xz   | Bin 0 -> 1108 bytes
 games/bsd_games/bsd-games-2.17-stdioh.patch.xz     | Bin 0 -> 288 bytes
 games/bsd_games/bsd-games-2.17-strfileman.patch.xz | Bin 0 -> 420 bytes
 games/bsd_games/bsd-games-2.17-tetris.patch.xz     | Bin 0 -> 324 bytes
 games/bsd_games/bsd-games-2.17-tmpfiles.patch.xz   | Bin 0 -> 280 bytes
 games/bsd_games/bsd-games-2.17-usrbin.patch.xz     | Bin 0 -> 320 bytes
 games/bsd_games/bsd_games.build                    | 106 ++++++++++++++++++
 games/ctetris/ctetris-0.30-compile.patch.bz2       | Bin 0 -> 1323 bytes
 games/ctetris/ctetris.SlackBuild                   |  71 ++++++++++++
 games/dhewm3/dhewm3-20130419-desktop.patch.xz      | Bin 0 -> 428 bytes
 games/dhewm3/dhewm3-20130419-nocdkey.patch.xz      | Bin 0 -> 292 bytes
 games/dhewm3/dhewm3.build                          |  63 +++++++++++
 games/flare/flare.build                            |  61 +++++++++++
 .../freedoom-iwad-0.8-beta1-desktop.patch.xz       | Bin 0 -> 11692 bytes
 games/freedoom/freedoom.build                      |  85 +++++++++++++++
 .../prboom-plus-2.5.1.3-autostuff.patch.xz         | Bin 0 -> 58100 bytes
 .../prboom-plus-2.5.1.3-dirlayout.patch.xz         | Bin 0 -> 6148 bytes
 games/freedoom/prboom-plus-2.5.1.3-docdir.patch.xz | Bin 0 -> 632 bytes
 games/lbreakout2/lbreakout2-2.6.4-desktop.patch.xz | Bin 0 -> 1944 bytes
 games/lbreakout2/lbreakout2.build                  |  65 +++++++++++
 games/lgeneral/lgeneral-1.2.3-desktop.patch.xz     | Bin 0 -> 368 bytes
 games/lgeneral/lgeneral-1.2.3-nobullshit.patch.xz  | Bin 0 -> 420 bytes
 games/lgeneral/lgeneral.build                      |  73 +++++++++++++
 games/lmarbles/lmarbles-1.0.8-desktop.patch.xz     | Bin 0 -> 1000 bytes
 games/lmarbles/lmarbles.build                      |  67 ++++++++++++
 games/lpairs/lpairs-1.0.4-desktop.patch.xz         | Bin 0 -> 404 bytes
 games/lpairs/lpairs.build                          |  64 +++++++++++
 games/ltris/ltris-1.0.18-desktopfile.patch.xz      | Bin 0 -> 404 bytes
 games/ltris/ltris-1.0.18-nogif.patch.xz            | Bin 0 -> 444 bytes
 games/ltris/ltris.build                            |  75 +++++++++++++
 games/mindless/mindless-1.6-copts.patch.xz         | Bin 0 -> 336 bytes
 games/mindless/mindless-1.6-desktop.patch.xz       | Bin 0 -> 3964 bytes
 games/mindless/mindless.build                      |  54 ++++++++++
 games/nibbles/nibbles-1.2-compile.patch.bz2        | Bin 0 -> 888 bytes
 games/nibbles/nibbles.SlackBuild                   |  72 +++++++++++++
 games/quake2/quake2-5.10-desktopfile.patch.xz      | Bin 0 -> 428 bytes
 games/quake2/quake2-5.10-optflags.patch.xz         | Bin 0 -> 316 bytes
 games/quake2/quake2-5.10-systemdirvid.patch.xz     | Bin 0 -> 580 bytes
 games/quake2/quake2-ctf-1.02-desktopfile.patch.xz  | Bin 0 -> 460 bytes
 games/quake2/quake2-ctf-1.02-optflags.patch.xz     | Bin 0 -> 324 bytes
 .../quake2/quake2-rogue-1.07-desktopfile.patch.xz  | Bin 0 -> 456 bytes
 games/quake2/quake2-rogue-1.07-optflags.patch.xz   | Bin 0 -> 324 bytes
 .../quake2/quake2-xatrix-1.09-desktopfile.patch.xz | Bin 0 -> 460 bytes
 games/quake2/quake2-xatrix-1.09-optflags.patch.xz  | Bin 0 -> 328 bytes
 games/quake2/quake2.build                          | 109 +++++++++++++++++++
 games/quakeforge/quakeforge-20101025-icon.patch.xz | Bin 0 -> 2628 bytes
 .../quakeforge-20101025-samplerate.patch.xz        | Bin 0 -> 272 bytes
 .../quakeforge-rev11804-desktopfiles.patch.xz      | Bin 0 -> 2024 bytes
 games/quakeforge/quakeforge.SlackBuild             | 119 +++++++++++++++++++++
 games/scummvm/scummvm.build                        |  65 +++++++++++
 games/tetrix/tetrix-2.3-makefile.patch.xz          | Bin 0 -> 636 bytes
 games/tetrix/tetrix.build                          |  47 ++++++++
 games/vor/vor-0.5.5-desktop.patch.xz               | Bin 0 -> 4352 bytes
 games/vor/vor.build                                |  62 +++++++++++
 games/xfishtank/xfishtank-2.2-debian23.patch.bz2   | Bin 0 -> 8404 bytes
 games/xfishtank/xfishtank-2.2-imake.patch.bz2      | Bin 0 -> 287 bytes
 games/xfishtank/xfishtank.SlackBuild               |  85 +++++++++++++++
 games/xmountains/xmountains-2.7-imake.patch.bz2    | Bin 0 -> 363 bytes
 games/xmountains/xmountains.SlackBuild             |  84 +++++++++++++++
 games/xpenguins/xpenguins-2.2-icon.patch.bz2       | Bin 0 -> 3043 bytes
 games/xpenguins/xpenguins.SlackBuild               | 119 +++++++++++++++++++++
 76 files changed, 1546 insertions(+)
 create mode 100644 games/bsd_games/bsd-games-2.17-64bit.patch.xz
 create mode 100644 games/bsd_games/bsd-games-2.17-acronymlocation.patch.xz
 create mode 100644 games/bsd_games/bsd-games-2.17-badntohlcast.patch.xz
 create mode 100644 games/bsd_games/bsd-games-2.17-config.patch.xz
 create mode 100644 games/bsd_games/bsd-games-2.17-extrafortunes.patch.xz
 create mode 100644 games/bsd_games/bsd-games-2.17-fortunequotetypos20120302.patch.xz
 create mode 100644 games/bsd_games/bsd-games-2.17-gamescreenh.patch.xz
 create mode 100644 games/bsd_games/bsd-games-2.17-gcc4fix.patch.xz
 create mode 100644 games/bsd_games/bsd-games-2.17-getline.patch.xz
 create mode 100644 games/bsd_games/bsd-games-2.17-hangmanwords.patch.xz
 create mode 100644 games/bsd_games/bsd-games-2.17-loginfortune.patch.xz
 create mode 100644 games/bsd_games/bsd-games-2.17-nullcheck.patch.xz
 create mode 100644 games/bsd_games/bsd-games-2.17-numberc.patch.xz
 create mode 100644 games/bsd_games/bsd-games-2.17-ospeed.patch.xz
 create mode 100644 games/bsd_games/bsd-games-2.17-pom.patch.xz
 create mode 100644 games/bsd_games/bsd-games-2.17-spelling.patch.xz
 create mode 100644 games/bsd_games/bsd-games-2.17-stdioh.patch.xz
 create mode 100644 games/bsd_games/bsd-games-2.17-strfileman.patch.xz
 create mode 100644 games/bsd_games/bsd-games-2.17-tetris.patch.xz
 create mode 100644 games/bsd_games/bsd-games-2.17-tmpfiles.patch.xz
 create mode 100644 games/bsd_games/bsd-games-2.17-usrbin.patch.xz
 create mode 100755 games/bsd_games/bsd_games.build
 create mode 100644 games/ctetris/ctetris-0.30-compile.patch.bz2
 create mode 100755 games/ctetris/ctetris.SlackBuild
 create mode 100644 games/dhewm3/dhewm3-20130419-desktop.patch.xz
 create mode 100644 games/dhewm3/dhewm3-20130419-nocdkey.patch.xz
 create mode 100755 games/dhewm3/dhewm3.build
 create mode 100755 games/flare/flare.build
 create mode 100644 games/freedoom/freedoom-iwad-0.8-beta1-desktop.patch.xz
 create mode 100755 games/freedoom/freedoom.build
 create mode 100644 games/freedoom/prboom-plus-2.5.1.3-autostuff.patch.xz
 create mode 100644 games/freedoom/prboom-plus-2.5.1.3-dirlayout.patch.xz
 create mode 100644 games/freedoom/prboom-plus-2.5.1.3-docdir.patch.xz
 create mode 100644 games/lbreakout2/lbreakout2-2.6.4-desktop.patch.xz
 create mode 100755 games/lbreakout2/lbreakout2.build
 create mode 100644 games/lgeneral/lgeneral-1.2.3-desktop.patch.xz
 create mode 100644 games/lgeneral/lgeneral-1.2.3-nobullshit.patch.xz
 create mode 100755 games/lgeneral/lgeneral.build
 create mode 100644 games/lmarbles/lmarbles-1.0.8-desktop.patch.xz
 create mode 100755 games/lmarbles/lmarbles.build
 create mode 100644 games/lpairs/lpairs-1.0.4-desktop.patch.xz
 create mode 100755 games/lpairs/lpairs.build
 create mode 100644 games/ltris/ltris-1.0.18-desktopfile.patch.xz
 create mode 100644 games/ltris/ltris-1.0.18-nogif.patch.xz
 create mode 100755 games/ltris/ltris.build
 create mode 100644 games/mindless/mindless-1.6-copts.patch.xz
 create mode 100644 games/mindless/mindless-1.6-desktop.patch.xz
 create mode 100755 games/mindless/mindless.build
 create mode 100644 games/nibbles/nibbles-1.2-compile.patch.bz2
 create mode 100755 games/nibbles/nibbles.SlackBuild
 create mode 100644 games/quake2/quake2-5.10-desktopfile.patch.xz
 create mode 100644 games/quake2/quake2-5.10-optflags.patch.xz
 create mode 100644 games/quake2/quake2-5.10-systemdirvid.patch.xz
 create mode 100644 games/quake2/quake2-ctf-1.02-desktopfile.patch.xz
 create mode 100644 games/quake2/quake2-ctf-1.02-optflags.patch.xz
 create mode 100644 games/quake2/quake2-rogue-1.07-desktopfile.patch.xz
 create mode 100644 games/quake2/quake2-rogue-1.07-optflags.patch.xz
 create mode 100644 games/quake2/quake2-xatrix-1.09-desktopfile.patch.xz
 create mode 100644 games/quake2/quake2-xatrix-1.09-optflags.patch.xz
 create mode 100755 games/quake2/quake2.build
 create mode 100644 games/quakeforge/quakeforge-20101025-icon.patch.xz
 create mode 100644 games/quakeforge/quakeforge-20101025-samplerate.patch.xz
 create mode 100644 games/quakeforge/quakeforge-rev11804-desktopfiles.patch.xz
 create mode 100755 games/quakeforge/quakeforge.SlackBuild
 create mode 100755 games/scummvm/scummvm.build
 create mode 100644 games/tetrix/tetrix-2.3-makefile.patch.xz
 create mode 100755 games/tetrix/tetrix.build
 create mode 100644 games/vor/vor-0.5.5-desktop.patch.xz
 create mode 100755 games/vor/vor.build
 create mode 100644 games/xfishtank/xfishtank-2.2-debian23.patch.bz2
 create mode 100644 games/xfishtank/xfishtank-2.2-imake.patch.bz2
 create mode 100755 games/xfishtank/xfishtank.SlackBuild
 create mode 100644 games/xmountains/xmountains-2.7-imake.patch.bz2
 create mode 100755 games/xmountains/xmountains.SlackBuild
 create mode 100644 games/xpenguins/xpenguins-2.2-icon.patch.bz2
 create mode 100755 games/xpenguins/xpenguins.SlackBuild

(limited to 'games')

diff --git a/games/bsd_games/bsd-games-2.17-64bit.patch.xz b/games/bsd_games/bsd-games-2.17-64bit.patch.xz
new file mode 100644
index 0000000..8d7289b
Binary files /dev/null and b/games/bsd_games/bsd-games-2.17-64bit.patch.xz differ
diff --git a/games/bsd_games/bsd-games-2.17-acronymlocation.patch.xz b/games/bsd_games/bsd-games-2.17-acronymlocation.patch.xz
new file mode 100644
index 0000000..ecabdb2
Binary files /dev/null and b/games/bsd_games/bsd-games-2.17-acronymlocation.patch.xz differ
diff --git a/games/bsd_games/bsd-games-2.17-badntohlcast.patch.xz b/games/bsd_games/bsd-games-2.17-badntohlcast.patch.xz
new file mode 100644
index 0000000..8b2fe87
Binary files /dev/null and b/games/bsd_games/bsd-games-2.17-badntohlcast.patch.xz differ
diff --git a/games/bsd_games/bsd-games-2.17-config.patch.xz b/games/bsd_games/bsd-games-2.17-config.patch.xz
new file mode 100644
index 0000000..e6c83c8
Binary files /dev/null and b/games/bsd_games/bsd-games-2.17-config.patch.xz differ
diff --git a/games/bsd_games/bsd-games-2.17-extrafortunes.patch.xz b/games/bsd_games/bsd-games-2.17-extrafortunes.patch.xz
new file mode 100644
index 0000000..bcdff39
Binary files /dev/null and b/games/bsd_games/bsd-games-2.17-extrafortunes.patch.xz differ
diff --git a/games/bsd_games/bsd-games-2.17-fortunequotetypos20120302.patch.xz b/games/bsd_games/bsd-games-2.17-fortunequotetypos20120302.patch.xz
new file mode 100644
index 0000000..f05e124
Binary files /dev/null and b/games/bsd_games/bsd-games-2.17-fortunequotetypos20120302.patch.xz differ
diff --git a/games/bsd_games/bsd-games-2.17-gamescreenh.patch.xz b/games/bsd_games/bsd-games-2.17-gamescreenh.patch.xz
new file mode 100644
index 0000000..08f6e47
Binary files /dev/null and b/games/bsd_games/bsd-games-2.17-gamescreenh.patch.xz differ
diff --git a/games/bsd_games/bsd-games-2.17-gcc4fix.patch.xz b/games/bsd_games/bsd-games-2.17-gcc4fix.patch.xz
new file mode 100644
index 0000000..d161156
Binary files /dev/null and b/games/bsd_games/bsd-games-2.17-gcc4fix.patch.xz differ
diff --git a/games/bsd_games/bsd-games-2.17-getline.patch.xz b/games/bsd_games/bsd-games-2.17-getline.patch.xz
new file mode 100644
index 0000000..5da8bbe
Binary files /dev/null and b/games/bsd_games/bsd-games-2.17-getline.patch.xz differ
diff --git a/games/bsd_games/bsd-games-2.17-hangmanwords.patch.xz b/games/bsd_games/bsd-games-2.17-hangmanwords.patch.xz
new file mode 100644
index 0000000..2f002e1
Binary files /dev/null and b/games/bsd_games/bsd-games-2.17-hangmanwords.patch.xz differ
diff --git a/games/bsd_games/bsd-games-2.17-loginfortune.patch.xz b/games/bsd_games/bsd-games-2.17-loginfortune.patch.xz
new file mode 100644
index 0000000..a5bd219
Binary files /dev/null and b/games/bsd_games/bsd-games-2.17-loginfortune.patch.xz differ
diff --git a/games/bsd_games/bsd-games-2.17-nullcheck.patch.xz b/games/bsd_games/bsd-games-2.17-nullcheck.patch.xz
new file mode 100644
index 0000000..7836214
Binary files /dev/null and b/games/bsd_games/bsd-games-2.17-nullcheck.patch.xz differ
diff --git a/games/bsd_games/bsd-games-2.17-numberc.patch.xz b/games/bsd_games/bsd-games-2.17-numberc.patch.xz
new file mode 100644
index 0000000..741a592
Binary files /dev/null and b/games/bsd_games/bsd-games-2.17-numberc.patch.xz differ
diff --git a/games/bsd_games/bsd-games-2.17-ospeed.patch.xz b/games/bsd_games/bsd-games-2.17-ospeed.patch.xz
new file mode 100644
index 0000000..66d1cf0
Binary files /dev/null and b/games/bsd_games/bsd-games-2.17-ospeed.patch.xz differ
diff --git a/games/bsd_games/bsd-games-2.17-pom.patch.xz b/games/bsd_games/bsd-games-2.17-pom.patch.xz
new file mode 100644
index 0000000..293a9d6
Binary files /dev/null and b/games/bsd_games/bsd-games-2.17-pom.patch.xz differ
diff --git a/games/bsd_games/bsd-games-2.17-spelling.patch.xz b/games/bsd_games/bsd-games-2.17-spelling.patch.xz
new file mode 100644
index 0000000..362d917
Binary files /dev/null and b/games/bsd_games/bsd-games-2.17-spelling.patch.xz differ
diff --git a/games/bsd_games/bsd-games-2.17-stdioh.patch.xz b/games/bsd_games/bsd-games-2.17-stdioh.patch.xz
new file mode 100644
index 0000000..45b1c06
Binary files /dev/null and b/games/bsd_games/bsd-games-2.17-stdioh.patch.xz differ
diff --git a/games/bsd_games/bsd-games-2.17-strfileman.patch.xz b/games/bsd_games/bsd-games-2.17-strfileman.patch.xz
new file mode 100644
index 0000000..9d100bf
Binary files /dev/null and b/games/bsd_games/bsd-games-2.17-strfileman.patch.xz differ
diff --git a/games/bsd_games/bsd-games-2.17-tetris.patch.xz b/games/bsd_games/bsd-games-2.17-tetris.patch.xz
new file mode 100644
index 0000000..ff8da8f
Binary files /dev/null and b/games/bsd_games/bsd-games-2.17-tetris.patch.xz differ
diff --git a/games/bsd_games/bsd-games-2.17-tmpfiles.patch.xz b/games/bsd_games/bsd-games-2.17-tmpfiles.patch.xz
new file mode 100644
index 0000000..e76ff77
Binary files /dev/null and b/games/bsd_games/bsd-games-2.17-tmpfiles.patch.xz differ
diff --git a/games/bsd_games/bsd-games-2.17-usrbin.patch.xz b/games/bsd_games/bsd-games-2.17-usrbin.patch.xz
new file mode 100644
index 0000000..99a6153
Binary files /dev/null and b/games/bsd_games/bsd-games-2.17-usrbin.patch.xz differ
diff --git a/games/bsd_games/bsd_games.build b/games/bsd_games/bsd_games.build
new file mode 100755
index 0000000..30bccc7
--- /dev/null
+++ b/games/bsd_games/bsd_games.build
@@ -0,0 +1,106 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=bsd_games
+VERSION=2.17
+BUILD=2
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: bsd_games (Classic BSD text games collection)
+${NAME}:
+${NAME}: Contains the following console classics : adventure arithmetic atc
+${NAME}: backgammon banner battlestar bcd caesar canfield cfscores countmail
+${NAME}: cribbage factor fish fortune gomoku hangman hunt mille monop morse
+${NAME}: number phantasia pig pom ppt primes quiz rain random robots rot13
+${NAME}: sail snake snscore teachgammon trek wargames worm worms wump
+${NAME}:
+${NAME}: Adds a call to 'fortune' to /etc/profile.d/ so that users will get a
+${NAME}: fortune message when they log in.
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+for file in \$(find var/lib/bsdgames -type f ); do
+  config \${file}
+  rm -f \${file}
+done
+EOF
+
+# Sources
+
+SRCNAME[0]=bsd-games
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=ftp://ftp.ibiblio.org/pub/Linux/games/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+
+build0()
+{
+sed -i "s|@PKGDIR@|${PKG}|g" config.params
+cp fortune/datfiles/unamerican-o.real fortune/datfiles/unamerican-o.fake
+cp fortune/datfiles/unamerican-o.real unamerican-o
+./configure
+make ${JOBS}
+make install
+doc AUTHORS BUGS THANKS
+changelog NEWS
+install.dir ${PKG}${SYS_DIR[etc]}/{profile.d,tmpfiles.d}
+install.bin fortune.{sh,csh} ${PKG}${SYS_DIR[etc]}/profile.d
+install.dat hunt.conf.tmpfiles ${PKG}${SYS_DIR[etc]}/tmpfiles.d/hunt.conf
+install.dir ${PKG}${SYS_DIR[share]}/dict
+install.dat hangman-words ${PKG}${SYS_DIR[share]}/dict/words
+# Scores etc...
+find ${PKG}${SYS_DIR[var]}/lib/bsdgames -type f -exec mv {} {}.new \;
+chown -R root.games ${PKG}${SYS_DIR[var]}/lib/bsdgames
+chmod 0664 ${PKG}${SYS_DIR[var]}/lib/bsdgames/*
+chmod 0664 ${PKG}${SYS_DIR[var]}/lib/bsdgames/{hack,phantasia}/*
+chmod 0775 ${PKG}${SYS_DIR[var]}/lib/bsdgames/{hack,phantasia}
+#FIXME: this should not go here
+#install.dir ${PKG}${SYS_DIR[share]}/application-data/bsdgames/data/hack/save
+# Conflicting files
+mv ${PKG}${SYS_DIR[bin]}/fish ${PKG}${SYS_DIR[bin]}/go-fish
+mv ${PKG}${SYS_DIR[man]}/man6/fish.6 ${PKG}${SYS_DIR[man]}/man6/go-fish.6
+mv ${PKG}${SYS_DIR[man]}/man6/worm.6 ${PKG}${SYS_DIR[man]}/man6/worm-game.6
+# Extra fortunes
+rm -f ${PKG}${SYS_DIR[share]}/application-data/bsdgames/fortune/limerick{,.dat}
+install.dat extra-fortunes/* ${PKG}${SYS_DIR[share]}/application-data/bsdgames/fortune
+(
+cd ${PKG}${SYS_DIR[share]}/application-data/bsdgames/fortune
+rm -f *.dat
+for file in ./*; do
+  ${PKG}${SYS_DIR[bin]}/strfile -r $(basename ${file} .dat)
+done
+for file in ./*-o; do
+  ${PKG}${SYS_DIR[bin]}/strfile -r -x $(basename ${file} .dat)
+done
+)
+# Clean-up
+rm -rf \
+ ${PKG}/tmp \
+ ${PKG}${SYS_DIR[doc]}/trek.me
+}
diff --git a/games/ctetris/ctetris-0.30-compile.patch.bz2 b/games/ctetris/ctetris-0.30-compile.patch.bz2
new file mode 100644
index 0000000..b477e36
Binary files /dev/null and b/games/ctetris/ctetris-0.30-compile.patch.bz2 differ
diff --git a/games/ctetris/ctetris.SlackBuild b/games/ctetris/ctetris.SlackBuild
new file mode 100755
index 0000000..e95a002
--- /dev/null
+++ b/games/ctetris/ctetris.SlackBuild
@@ -0,0 +1,71 @@
+#!/bin/sh
+
+CWD=`pwd`
+NAME=ctetris
+VERSION=0.30
+ARCH=i586
+BUILD=1
+PKGNAME=$NAME
+PKGVER=$VERSION
+BASEDIR=$PKGNAME-$PKGVER
+ARCHIVE=$BASEDIR.tar.bz2
+REPOSITORY=http://
+FLAGS="-O2 -march=pentium -mcpu=pentium -fno-strength-reduce \
+ -fomit-frame-pointer -ffast-math"
+PKG=/tmp/package-$NAME
+
+rm -rf $PKG
+mkdir -p $PKG
+
+# Obtain sources
+if [ ! -e $ARCHIVE ]; then
+  if `wget "$REPOSITORY/$ARCHIVE"`; then
+    true
+  else
+    exit 1
+  fi
+fi
+
+# Compile
+cd /tmp
+tar jxvf $CWD/$ARCHIVE
+cd $BASEDIR
+bzcat $CWD/$NAME-$VERSION-compile.patch.bz2 | patch -p1 -s
+make COPTS="$FLAGS"
+
+# Install
+make install DESTDIR=$PKG
+mkdir -p $PKG/install
+cat > $PKG/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+       |-----handy-ruler------------------------------------------------------|
+ctetris: ctetris
+ctetris:
+ctetris: A single player, console (text mode) Tetris game.
+ctetris:
+ctetris:
+ctetris:
+ctetris:
+ctetris:
+ctetris:
+ctetris:
+ctetris:
+EOF
+
+chmod 444 $PKG/usr/man/man?/*.?
+gzip -9nf $PKG/usr/man/man?/*.?
+
+strip $PKG/usr/games/* || :
+
+chown -R root.root $PKG
+
+# Make package
+cd $PKG
+cat install/slack-desc | grep "$NAME:" > /tmp/$NAME-$VERSION-$ARCH-$BUILD.txt
+makepkg -l y -c n /tmp/$NAME-$VERSION-$ARCH-$BUILD.tgz
diff --git a/games/dhewm3/dhewm3-20130419-desktop.patch.xz b/games/dhewm3/dhewm3-20130419-desktop.patch.xz
new file mode 100644
index 0000000..cbef34e
Binary files /dev/null and b/games/dhewm3/dhewm3-20130419-desktop.patch.xz differ
diff --git a/games/dhewm3/dhewm3-20130419-nocdkey.patch.xz b/games/dhewm3/dhewm3-20130419-nocdkey.patch.xz
new file mode 100644
index 0000000..e509b12
Binary files /dev/null and b/games/dhewm3/dhewm3-20130419-nocdkey.patch.xz differ
diff --git a/games/dhewm3/dhewm3.build b/games/dhewm3/dhewm3.build
new file mode 100755
index 0000000..534cc70
--- /dev/null
+++ b/games/dhewm3/dhewm3.build
@@ -0,0 +1,63 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=dhewm3
+VERSION=20130419
+BUILD=1
+DEPENDS=('sdl >= 2.0.15-1' 'libopenal >= 1.15.1-1' 'libvorbis >= 1.3.3-1' 'libjpeg >= 1.2.1-1' 'curl >= 7.29.0-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: dhewm3
+${NAME}:
+${NAME}: A Doom 3 source modification.
+${NAME}:
+${NAME}: Homepage: http://github.com/dhewm/dhewm3
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+SRCCOPY[0]="GPL3"
+
+build0()
+{
+(
+cd neo
+cmake \
+-DCMAKE_BUILD_TYPE:STRING="Release" \
+-DCMAKE_CXX_FLAGS:STRING="${FLAGS}" \
+-DCMAKE_C_FLAGS:STRING="${FLAGS}" \
+-DCMAKE_VERBOSE_MAKEFILE:BOOL="on" \
+-DCMAKE_INSTALL_PREFIX:PATH="${SYS_DIR[usr]}" \
+-DCMAKE_INSTALL_BINDIR:PATH="${SYS_DIR[bin]}" \
+-DCMAKE_INSTALL_LIBDIR:PATH="${SYS_DIR[lib]}/plugins" \
+-DCMAKE_INSTALL_DATAROOTDIR:PATH="${SYS_DIR[share]}/application-data" \
+CMakeLists.txt
+make ${JOBS}
+make install DESTDIR="${PKG}"
+)
+doc README.md
+install.dir ${PKG}${SYS_DIR[share]}/applications
+install.dat dhewm3.desktop ${PKG}${SYS_DIR[share]}/applications
+}
diff --git a/games/flare/flare.build b/games/flare/flare.build
new file mode 100755
index 0000000..2e2206e
--- /dev/null
+++ b/games/flare/flare.build
@@ -0,0 +1,61 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=flare
+VERSION=0.19
+BUILD=2
+DEPENDS=('sdl >= 1.2.15-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: flare (hack and slash game)
+${NAME}:
+${NAME}: An single player 2D action role playing game.
+${NAME}:
+${NAME}: Homepage: http://flarerpg.org
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=${URL[sf]}/flare-game/Linux/${SRCNAME[0]}.${SRCVERS[0]}.tar.gz
+SRCROOT[0]="${SRCNAME[0]}.${SRCVERS[0]}"
+SRCCOPY[0]="GPL3"
+
+build0()
+{
+cmake \
+ -DCMAKE_BUILD_TYPE:STRING="Release" \
+ -DCMAKE_VERBOSE_MAKEFILE:BOOL="on" \
+ -DCMAKE_CXX_FLAGS:STRING="${FLAGS}" \
+ -DCMAKE_INSTALL_PREFIX:STRING="/usr" \
+ -DDATADIR:STRING="share/application-data/flare" \
+ -DBINDIR:STRING="bin" \
+.
+make ${JOBS}
+make install DESTDIR="${PKG}"
+sed 's|@FLARE_EXECUTABLE_PATH@|flare|g' distribution/flare.desktop.in > flare.desktop
+install.dir ${PKG}${SYS_DIR[share]}/applications
+install.dat flare.desktop ${PKG}${SYS_DIR[share]}/applications
+install.dir ${PKG}${SYS_DIR[share]}/icons/hicolor/scalable/apps
+install.dat distribution/flare_logo.svg ${PKG}${SYS_DIR[share]}/icons/hicolor/scalable/apps/flare.svg
+}
diff --git a/games/freedoom/freedoom-iwad-0.8-beta1-desktop.patch.xz b/games/freedoom/freedoom-iwad-0.8-beta1-desktop.patch.xz
new file mode 100644
index 0000000..f74aabf
Binary files /dev/null and b/games/freedoom/freedoom-iwad-0.8-beta1-desktop.patch.xz differ
diff --git a/games/freedoom/freedoom.build b/games/freedoom/freedoom.build
new file mode 100755
index 0000000..45c2b9f
--- /dev/null
+++ b/games/freedoom/freedoom.build
@@ -0,0 +1,85 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=freedoom
+VERSION=0.8beta1
+BUILD=1
+DEPENDS=('sdl >= 1.2.15-1' 'pcre >= 8.32-1' 'libmad >= 0.15.1b-1' 'libvorbis >= 1.3.3-1' 'libpng >= 1.5.14-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: FreeDOOM
+${NAME}:
+${NAME}: The Freedoom project aims to create a complete Doom-based game which
+${NAME}: is free software.
+${NAME}:
+${NAME}: This package also includes PrBoom+ which is the culmination of years
+${NAME}: of work by various people and projects on the Doom source code.
+${NAME}:
+${NAME}: Freedoom homepage: http://freedoom.sourceforge.net
+${NAME}: PrBoom+ homepage: http://prboom-plus.sourceforge.net
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}-iwad
+SRCVERS[0]=0.8-beta1
+SRCPACK[0]=http://download.savannah.gnu.org/releases/freedoom/${SRCNAME[0]}/${SRCNAME[0]}-${SRCVERS[0]}.zip
+SRCCOPY[0]="BSD3"
+
+build0()
+{
+doc CREDITS
+changelog ChangeLog
+install.dir ${PKG}${SYS_DIR[share]}/application-data/freedoom
+install.dat doom2.wad ${PKG}${SYS_DIR[share]}/application-data/freedoom
+install.dir ${PKG}${SYS_DIR[share]}/{applications,icons/hicolor/48x48/apps}
+install.dat freedoom.desktop ${PKG}${SYS_DIR[share]}/applications
+install.dat freedoom.png ${PKG}${SYS_DIR[share]}/icons/hicolor/48x48/apps
+}
+
+SRCNAME[1]=prboom-plus
+SRCVERS[1]=2.5.1.3
+SRCPACK[1]=${URL[sf]}/${SRCNAME[1]}/${SRCNAME[1]}/${SRCVERS[1]}/${SRCNAME[1]}-${SRCVERS[1]}.tar.gz
+SRCCOPY[0]="GPL2"
+
+build1()
+{
+CPPFLAGS="-I${SYS_DIR[include]}/mad" \
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-waddir="${SYS_DIR[share]}/application-data/prboom-plus"
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog NEWS
+install.dir ${PKG}${SYS_DIR[share]}/application-data/prboom-plus
+(
+  cd ${PKG}${SYS_DIR[share]}/application-data/prboom-plus
+  ln -s ${SYS_DIR[share]}/application-data/freedoom/doom2.wad
+)
+rm -rf ${PKG}${SYS_DIR[doc]}/prboom-plus
+}
diff --git a/games/freedoom/prboom-plus-2.5.1.3-autostuff.patch.xz b/games/freedoom/prboom-plus-2.5.1.3-autostuff.patch.xz
new file mode 100644
index 0000000..9aaea92
Binary files /dev/null and b/games/freedoom/prboom-plus-2.5.1.3-autostuff.patch.xz differ
diff --git a/games/freedoom/prboom-plus-2.5.1.3-dirlayout.patch.xz b/games/freedoom/prboom-plus-2.5.1.3-dirlayout.patch.xz
new file mode 100644
index 0000000..670b631
Binary files /dev/null and b/games/freedoom/prboom-plus-2.5.1.3-dirlayout.patch.xz differ
diff --git a/games/freedoom/prboom-plus-2.5.1.3-docdir.patch.xz b/games/freedoom/prboom-plus-2.5.1.3-docdir.patch.xz
new file mode 100644
index 0000000..c586f56
Binary files /dev/null and b/games/freedoom/prboom-plus-2.5.1.3-docdir.patch.xz differ
diff --git a/games/lbreakout2/lbreakout2-2.6.4-desktop.patch.xz b/games/lbreakout2/lbreakout2-2.6.4-desktop.patch.xz
new file mode 100644
index 0000000..406342d
Binary files /dev/null and b/games/lbreakout2/lbreakout2-2.6.4-desktop.patch.xz differ
diff --git a/games/lbreakout2/lbreakout2.build b/games/lbreakout2/lbreakout2.build
new file mode 100755
index 0000000..413a8d2
--- /dev/null
+++ b/games/lbreakout2/lbreakout2.build
@@ -0,0 +1,65 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=lbreakout2
+MAJOR=2.6
+VERSION=${MAJOR}.4
+BUILD=1
+DEPENDS=('sdl >= 1.2.15-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: lbreakout2 (arcade game)
+${NAME}:
+${NAME}: A game in which a ball bounces around and the player must use the
+${NAME}: paddle  to keep it in the game. When all bricks are destroyed, the
+${NAME}: next level unlocks.
+${NAME}:
+${NAME}: Homepage: http://lgames.sourceforge.net
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=${URL[sf]}/lgames/${SRCNAME[0]}/${MAJOR}/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-rpath \
+ --prefix=/usr \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir=/etc \
+ --libdir=/usr/lib$(libdirsuffix) \
+ --localstatedir=/var/lib/games \
+ --with-docdir="${SYS_DIR[html]}" \
+ --enable-sdl-net
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog ChangeLog
+rm -rf ${PKG}/usr/share/icons
+install.dir ${PKG}/usr/share/icons/hicolor/48x48/apps
+install.dat lbreakout2.png ${PKG}/usr/share/icons/hicolor/48x48/apps
+}
diff --git a/games/lgeneral/lgeneral-1.2.3-desktop.patch.xz b/games/lgeneral/lgeneral-1.2.3-desktop.patch.xz
new file mode 100644
index 0000000..494e5a8
Binary files /dev/null and b/games/lgeneral/lgeneral-1.2.3-desktop.patch.xz differ
diff --git a/games/lgeneral/lgeneral-1.2.3-nobullshit.patch.xz b/games/lgeneral/lgeneral-1.2.3-nobullshit.patch.xz
new file mode 100644
index 0000000..bdb5d4b
Binary files /dev/null and b/games/lgeneral/lgeneral-1.2.3-nobullshit.patch.xz differ
diff --git a/games/lgeneral/lgeneral.build b/games/lgeneral/lgeneral.build
new file mode 100755
index 0000000..4e7e4ac
--- /dev/null
+++ b/games/lgeneral/lgeneral.build
@@ -0,0 +1,73 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=lgeneral
+VERSION=1.2.3
+BUILD=1
+DEPENDS=('sdl >= 1.2.14-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: lgeneral (strategy game)
+${NAME}:
+${NAME}: A reimplementation of the Panzer General engine.
+${NAME}:
+${NAME}: Homepage: http://lgames.sf.net
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=${URL[sf]}/lgames/${SRCNAME[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-rpath \
+ --prefix=/usr \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir=/etc \
+ --libdir=/usr/lib$(libdirsuffix) \
+ --localstatedir=/var/lib/games
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog ChangeLog
+rm -rf ${PKG}/usr/share/icons
+install.dir ${PKG}/usr/share/icons/hicolor/{16x16,32x32,48x48}/apps
+install.dat lgeneral16.png ${PKG}/usr/share/icons/hicolor/16x16/apps/lgeneral.png
+install.dat lgeneral32.png ${PKG}/usr/share/icons/hicolor/32x32/apps/lgeneral.png
+install.dat lgeneral48.png ${PKG}/usr/share/icons/hicolor/48x48/apps/lgeneral.png
+}
+
+SRCNAME[1]=pg
+SRCVERS[1]=data
+SRCPACK[1]=${URL[sf]}/lgames/${SRCNAME[1]}/${SRCNAME[1]}-${SRCVERS[1]}.tar.gz
+
+build1()
+{
+${PKG}/usr/bin/lgc-pg -s . -d ${PKG}/usr/share/games/lgeneral
+}
diff --git a/games/lmarbles/lmarbles-1.0.8-desktop.patch.xz b/games/lmarbles/lmarbles-1.0.8-desktop.patch.xz
new file mode 100644
index 0000000..40e171e
Binary files /dev/null and b/games/lmarbles/lmarbles-1.0.8-desktop.patch.xz differ
diff --git a/games/lmarbles/lmarbles.build b/games/lmarbles/lmarbles.build
new file mode 100755
index 0000000..6cc5bbf
--- /dev/null
+++ b/games/lmarbles/lmarbles.build
@@ -0,0 +1,67 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=lmarbles
+VERSION=1.0.8
+BUILD=1
+DEPENDS=('sdl >= 1.2.14-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: lmarbles
+${NAME}:
+${NAME}: Lmarbles is very similar to Atomix and was inspired by it. The goal
+${NAME}: is to create a more or less complex figure out of single marbles
+${NAME}: within a time limit to reach to the next level. Sounds easy? Well,
+${NAME}: there is a problem: If a marble starts to move, it will not stop
+${NAME}: until it hits a wall or another marble.
+${NAME}:
+${NAME}: Homepage: http://lgames.sf.net
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=${URL[sf]}/lgames/${SRCNAME[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix=/usr \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir=/etc \
+ --libdir=/usr/lib$(libdirsuffix) \
+ --localstatedir=/var/lib/games
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog ChangeLog
+rm -rf ${PKG}/usr/share/icons
+install.dir ${PKG}/usr/share/icons/hicolor/48x48/apps
+install.dat lmarbles.png ${PKG}/usr/share/icons/hicolor/48x48/apps
+install.dir ${PKG}/usr/share/html
+mv src/manual ${PKG}/usr/share/html/lmarbles
+chown root.games ${PKG}/var/lib/games/lmarbles.prfs
+chmod 660 ${PKG}/var/lib/games/lmarbles.prfs
+}
diff --git a/games/lpairs/lpairs-1.0.4-desktop.patch.xz b/games/lpairs/lpairs-1.0.4-desktop.patch.xz
new file mode 100644
index 0000000..9367cc1
Binary files /dev/null and b/games/lpairs/lpairs-1.0.4-desktop.patch.xz differ
diff --git a/games/lpairs/lpairs.build b/games/lpairs/lpairs.build
new file mode 100755
index 0000000..3e64668
--- /dev/null
+++ b/games/lpairs/lpairs.build
@@ -0,0 +1,64 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=lpairs
+VERSION=1.0.4
+BUILD=1
+DEPENDS=('sdl >= 1.2.14-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: lpairs
+${NAME}:
+${NAME}: Lpairs is a classic memory game for Linux. There is also sound
+${NAME}: support. This is great for kids, but also for adults that have some
+${NAME}: spare time...
+${NAME}:
+${NAME}: Homepage: http://lgames.sf.net/index.php?project=LPairs
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=${URL[sf]}/lgames/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-rpath \
+ --prefix=/usr \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir=/etc \
+ --libdir=/usr/lib$(libdirsuffix) \
+ --localstatedir=/var
+make -j 2
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog ChangeLog
+mkdir -p ${PKG}/usr/share/{applications,icons/hicolor/48x48/apps}
+install -m 0644 lpairs.png \
+ ${PKG}/usr/share/icons/hicolor/48x48/apps
+install -m 0644 lpairs.desktop \
+ ${PKG}/usr/share/applications
+}
diff --git a/games/ltris/ltris-1.0.18-desktopfile.patch.xz b/games/ltris/ltris-1.0.18-desktopfile.patch.xz
new file mode 100644
index 0000000..032f667
Binary files /dev/null and b/games/ltris/ltris-1.0.18-desktopfile.patch.xz differ
diff --git a/games/ltris/ltris-1.0.18-nogif.patch.xz b/games/ltris/ltris-1.0.18-nogif.patch.xz
new file mode 100644
index 0000000..2143e2c
Binary files /dev/null and b/games/ltris/ltris-1.0.18-nogif.patch.xz differ
diff --git a/games/ltris/ltris.build b/games/ltris/ltris.build
new file mode 100755
index 0000000..bb4316b
--- /dev/null
+++ b/games/ltris/ltris.build
@@ -0,0 +1,75 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=ltris
+VERSION=1.0.18
+BUILD=1
+DEPENDS=('sdl >= 1.2.14-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: ltris (tetris game)
+${NAME}:
+${NAME}: Stack the figures so that they don't reach the top of the screen by
+${NAME}: making horizontal lines.
+${NAME}:
+${NAME}: Homepage: http://lgames.sf.net
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=${URL[sf]}/lgames/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-rpath \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix=/usr \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir=/etc \
+ --libdir=/usr/lib$(libdirsuffix) \
+ --localstatedir=/var/lib/games
+make -j 2
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog ChangeLog
+chown root.games ${PKG}/var/lib/games/ltris.hscr
+chmod 0660 ${PKG}/var/lib/games/ltris.hscr
+rm -f \
+ ${PKG}/usr/share/icons/*.gif
+}
+
+SRCNAME[1]=${NAME}
+SRCVERS[1]=desktop
+SRCPACK[1]=${SRCNAME[1]}-${SRCVERS[1]}.tar.xz
+SRCOPTS[1]="pkgunpack"
+
+build1()
+{
+echo "Nothing to do here!"
+}
diff --git a/games/mindless/mindless-1.6-copts.patch.xz b/games/mindless/mindless-1.6-copts.patch.xz
new file mode 100644
index 0000000..cb67e64
Binary files /dev/null and b/games/mindless/mindless-1.6-copts.patch.xz differ
diff --git a/games/mindless/mindless-1.6-desktop.patch.xz b/games/mindless/mindless-1.6-desktop.patch.xz
new file mode 100644
index 0000000..51b4eef
Binary files /dev/null and b/games/mindless/mindless-1.6-desktop.patch.xz differ
diff --git a/games/mindless/mindless.build b/games/mindless/mindless.build
new file mode 100755
index 0000000..f13d33e
--- /dev/null
+++ b/games/mindless/mindless.build
@@ -0,0 +1,54 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=mindless
+VERSION=1.6
+BUILD=2
+DEPENDS=('gtk+ >= 2.24.17-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: mindless (Mindless Automaton)
+${NAME}:
+${NAME}: A virtual tabletop on which you can play card games against other
+${NAME}: people over a network. It was designed to simulate the Magic: The
+${NAME}: Gathering(R) game. But it can be expanded to simulate other games.
+${NAME}: Mindless Automaton was very, very inspired by the popular Windows
+${NAME}: program Apprentice (and is compatible with it).
+${NAME}:
+${NAME}: Homepage: http://mindless.sourceforge.net
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=${URL[sf]}/mindless/${SRCNAME[0]}/${SRCVERS[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+make ${JOBS} COPTS="${FLAGS}"
+#make install DESTDIR="${PKG}"
+changelog CHANGES
+install.dir ${PKG}${SYS_DIR[bin]}
+install.bin mindless ${PKG}${SYS_DIR[bin]}
+install.dir ${PKG}${SYS_DIR[share]}/applications
+install.dat mindless.desktop ${PKG}${SYS_DIR[share]}/applications
+install.dir ${PKG}${SYS_DIR[share]}/icons/hicolor/48x48/apps
+install.dat mindless.png ${PKG}${SYS_DIR[share]}/icons/hicolor/48x48/apps
+}
diff --git a/games/nibbles/nibbles-1.2-compile.patch.bz2 b/games/nibbles/nibbles-1.2-compile.patch.bz2
new file mode 100644
index 0000000..46ec0ba
Binary files /dev/null and b/games/nibbles/nibbles-1.2-compile.patch.bz2 differ
diff --git a/games/nibbles/nibbles.SlackBuild b/games/nibbles/nibbles.SlackBuild
new file mode 100755
index 0000000..deafd02
--- /dev/null
+++ b/games/nibbles/nibbles.SlackBuild
@@ -0,0 +1,72 @@
+#!/bin/sh
+
+CWD=`pwd`
+NAME=nibbles
+VERSION=1.2
+ARCH=i586
+BUILD=1
+PKGNAME=$NAME
+PKGVER=$VERSION
+BASEDIR=$PKGNAME-$PKGVER
+ARCHIVE=$BASEDIR.tar.bz2
+REPOSITORY=http://
+FLAGS="-O2 -march=pentium -mcpu=pentium -fno-strength-reduce \
+ -fomit-frame-pointer -ffast-math"
+PKG=/tmp/package-$NAME
+
+rm -rf $PKG
+mkdir -p $PKG
+
+# Obtain sources
+if [ ! -e $ARCHIVE ]; then
+  if `wget "$REPOSITORY/$ARCHIVE"`; then
+    true
+  else
+    exit 1
+  fi
+fi
+
+# Compile
+cd /tmp
+tar jxvf $CWD/$ARCHIVE
+cd $BASEDIR
+bzcat $CWD/$NAME-$VERSION-compile.patch.bz2 | patch -p1 -s
+make COPTS="$FLAGS"
+
+# Install
+mkdir -p $PKG/install $PKG/usr/games $PKG/usr/man/man6
+cat > $PKG/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+       |-----handy-ruler------------------------------------------------------|
+nibbles: nibbles
+nibbles:
+nibbles: Nibbles is a console arcade game in which the player controls a worm
+nibbles: which is always in motion and whose size increases each time it eats
+nibbles: an apple. Each time the worm eats an apple, one point is scored. If
+nibbles: the worm runs into the edge of the screen or runs into itself then
+nibbles: the game is lost.
+nibbles:
+nibbles:
+nibbles:
+nibbles:
+EOF
+
+install -m0755 nibbles $PKG/usr/games
+install -m0444 nibbles.6 $PKG/usr/man/man6
+
+gzip -9nf $PKG/usr/man/man?/*.?
+
+strip $PKG/usr/games/* || :
+
+chown -R root.root $PKG
+
+# Make package
+cd $PKG
+cat install/slack-desc | grep "$NAME:" > /tmp/$NAME-$VERSION-$ARCH-$BUILD.txt
+makepkg -l y -c n /tmp/$NAME-$VERSION-$ARCH-$BUILD.tgz
diff --git a/games/quake2/quake2-5.10-desktopfile.patch.xz b/games/quake2/quake2-5.10-desktopfile.patch.xz
new file mode 100644
index 0000000..2e415c1
Binary files /dev/null and b/games/quake2/quake2-5.10-desktopfile.patch.xz differ
diff --git a/games/quake2/quake2-5.10-optflags.patch.xz b/games/quake2/quake2-5.10-optflags.patch.xz
new file mode 100644
index 0000000..eebf99b
Binary files /dev/null and b/games/quake2/quake2-5.10-optflags.patch.xz differ
diff --git a/games/quake2/quake2-5.10-systemdirvid.patch.xz b/games/quake2/quake2-5.10-systemdirvid.patch.xz
new file mode 100644
index 0000000..79984a5
Binary files /dev/null and b/games/quake2/quake2-5.10-systemdirvid.patch.xz differ
diff --git a/games/quake2/quake2-ctf-1.02-desktopfile.patch.xz b/games/quake2/quake2-ctf-1.02-desktopfile.patch.xz
new file mode 100644
index 0000000..295e625
Binary files /dev/null and b/games/quake2/quake2-ctf-1.02-desktopfile.patch.xz differ
diff --git a/games/quake2/quake2-ctf-1.02-optflags.patch.xz b/games/quake2/quake2-ctf-1.02-optflags.patch.xz
new file mode 100644
index 0000000..5e3c869
Binary files /dev/null and b/games/quake2/quake2-ctf-1.02-optflags.patch.xz differ
diff --git a/games/quake2/quake2-rogue-1.07-desktopfile.patch.xz b/games/quake2/quake2-rogue-1.07-desktopfile.patch.xz
new file mode 100644
index 0000000..7b082ff
Binary files /dev/null and b/games/quake2/quake2-rogue-1.07-desktopfile.patch.xz differ
diff --git a/games/quake2/quake2-rogue-1.07-optflags.patch.xz b/games/quake2/quake2-rogue-1.07-optflags.patch.xz
new file mode 100644
index 0000000..ee9c420
Binary files /dev/null and b/games/quake2/quake2-rogue-1.07-optflags.patch.xz differ
diff --git a/games/quake2/quake2-xatrix-1.09-desktopfile.patch.xz b/games/quake2/quake2-xatrix-1.09-desktopfile.patch.xz
new file mode 100644
index 0000000..116672f
Binary files /dev/null and b/games/quake2/quake2-xatrix-1.09-desktopfile.patch.xz differ
diff --git a/games/quake2/quake2-xatrix-1.09-optflags.patch.xz b/games/quake2/quake2-xatrix-1.09-optflags.patch.xz
new file mode 100644
index 0000000..9aef994
Binary files /dev/null and b/games/quake2/quake2-xatrix-1.09-optflags.patch.xz differ
diff --git a/games/quake2/quake2.build b/games/quake2/quake2.build
new file mode 100755
index 0000000..9805355
--- /dev/null
+++ b/games/quake2/quake2.build
@@ -0,0 +1,109 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=quake2
+VERSION=5.10
+BUILD=2
+DEPENDS=('sdl >= 1.2.15-1' 'sound >= 1.0.26-1' 'libvorbis >= 1.3.3-1' 'libopenal >= 1.15.1-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: quake2
+${NAME}:
+${NAME}: Yamagi Quake II is an enhanced client for id Software's Quake II. The
+${NAME}: main focus is an unchanged single player experience like back in
+${NAME}: 1997, thus the gameplay and the graphics are unaltered. Over 1000
+${NAME}: bugs were fixed and an extensive code audit was done, making Yamagi
+${NAME}: Quake II one of the most solid Quake II implementations available.
+${NAME}:
+${NAME}: Homepage: http://www.yamagi.org/quake2
+${NAME}:
+${NAME}:
+EOF
+
+QLIBDIR="${SYS_DIR[lib]}/plugins/quake2"
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://deponie.yamagi.org/${SRCNAME[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+
+build0()
+{
+make ${JOBS} VERBOSE=1 \
+OPTS="${FLAGS} -DSYSTEMWIDE -DSYSTEMDIR=\\\"${QLIBDIR}\\\""
+doc README
+changelog CHANGELOG
+license LICENSE
+install.dir ${PKG}${SYS_DIR[bin]}
+install.bin release/quake2 ${PKG}${SYS_DIR[bin]}
+install.bin release/q2ded ${PKG}${SYS_DIR[bin]}
+install.dir ${PKG}${QLIBDIR}/baseq2
+install.bin release/ref_gl.so ${PKG}${QLIBDIR}
+install.bin release/baseq2/game.so ${PKG}${QLIBDIR}/baseq2
+install.dir ${PKG}${SYS_DIR[share]}/applications
+install.dat quake2.desktop ${PKG}${SYS_DIR[share]}/applications
+#install.dir ${PKG}${SYS_DIR[share]}/icons/hicolor/48x48/apps
+#install.dat icon/Quake2.png ${PKG}${SYS_DIR[share]}/icons/hicolor/48x48/apps/quake2.png
+}
+
+SRCNAME[1]=${NAME}-rogue
+SRCVERS[1]=1.07
+SRCPACK[1]=http://deponie.yamagi.org/${SRCNAME[0]}/${SRCNAME[1]}-${SRCVERS[1]}.tar.xz
+
+build1()
+{
+make ${JOBS} VERBOSE=1 OPTS="${FLAGS}"
+doc README
+changelog CHANGELOG
+license LICENSE
+install.dir ${PKG}${QLIBDIR}/rogue
+install.bin release/game.so ${PKG}${QLIBDIR}/rogue
+install.dir ${PKG}${SYS_DIR[share]}/applications
+install.dat quake2-rogue.desktop ${PKG}${SYS_DIR[share]}/applications
+}
+
+SRCNAME[2]=${NAME}-xatrix
+SRCVERS[2]=1.09
+SRCPACK[2]=http://deponie.yamagi.org/${SRCNAME[0]}/${SRCNAME[2]}-${SRCVERS[2]}.tar.xz
+
+build2()
+{
+make ${JOBS} VERBOSE=1 OPTS="${FLAGS}"
+doc README
+changelog CHANGELOG
+license LICENSE
+install.dir ${PKG}${QLIBDIR}/xatrix
+install.bin release/game.so ${PKG}${QLIBDIR}/xatrix
+install.dir ${PKG}${SYS_DIR[share]}/applications
+install.dat quake2-xatrix.desktop ${PKG}${SYS_DIR[share]}/applications
+}
+
+SRCNAME[3]=${NAME}-ctf
+SRCVERS[3]=1.02
+SRCPACK[3]=http://deponie.yamagi.org/${SRCNAME[0]}/${SRCNAME[3]}-${SRCVERS[3]}.tar.xz
+
+build3()
+{
+make ${JOBS} VERBOSE=1 OPTS="${FLAGS}"
+doc README
+changelog CHANGELOG
+license LICENSE
+install.dir ${PKG}${QLIBDIR}/ctf
+install.bin release/game.so ${PKG}${QLIBDIR}/ctf
+install.dir ${PKG}${SYS_DIR[share]}/applications
+install.dat quake2-ctf.desktop ${PKG}${SYS_DIR[share]}/applications
+}
diff --git a/games/quakeforge/quakeforge-20101025-icon.patch.xz b/games/quakeforge/quakeforge-20101025-icon.patch.xz
new file mode 100644
index 0000000..2e436a4
Binary files /dev/null and b/games/quakeforge/quakeforge-20101025-icon.patch.xz differ
diff --git a/games/quakeforge/quakeforge-20101025-samplerate.patch.xz b/games/quakeforge/quakeforge-20101025-samplerate.patch.xz
new file mode 100644
index 0000000..cfbab33
Binary files /dev/null and b/games/quakeforge/quakeforge-20101025-samplerate.patch.xz differ
diff --git a/games/quakeforge/quakeforge-rev11804-desktopfiles.patch.xz b/games/quakeforge/quakeforge-rev11804-desktopfiles.patch.xz
new file mode 100644
index 0000000..9c16357
Binary files /dev/null and b/games/quakeforge/quakeforge-rev11804-desktopfiles.patch.xz differ
diff --git a/games/quakeforge/quakeforge.SlackBuild b/games/quakeforge/quakeforge.SlackBuild
new file mode 100755
index 0000000..030d829
--- /dev/null
+++ b/games/quakeforge/quakeforge.SlackBuild
@@ -0,0 +1,119 @@
+#!/bin/sh
+
+CWD=`pwd`
+NAME=quakeforge
+VERSION=20101025
+ARCH=i586
+BUILD=1
+PKGNAME=$NAME
+PKGVER=$VERSION
+BASEDIR=$PKGNAME-$PKGVER
+ARCHIVE=$BASEDIR.tar.xz
+REPOSITORY=http://some/where
+FLAGS="-O2 -march=pentium -mtune=pentium -fno-strength-reduce \
+ -fomit-frame-pointer -ffast-math"
+PKG=/tmp/package-$NAME
+
+rm -rf $PKG
+mkdir -p $PKG
+
+# Obtain sources
+if [ ! -e $ARCHIVE ]; then
+  if `wget "$REPOSITORY/$ARCHIVE"`; then
+    true
+  else
+    exit 1
+  fi
+fi
+
+# Compile
+cd /tmp
+tar Jxvf $CWD/$ARCHIVE
+cd $BASEDIR
+xzcat $CWD/$NAME-$VERSION-icon.patch.xz | patch -p1 -s
+xzcat $CWD/$NAME-$VERSION-samplerate.patch.xz | patch -p1 -s
+#./bootstrap
+CFLAGS=$FLAGS CXXFLAGS=$FLAGS ./configure \
+ --build=${ARCH}-slackware-linux \
+ --enable-shared=yes \
+ --enable-static=no \
+ --disable-Werror \
+ --disable-debug \
+ --prefix=/usr \
+ --mandir=/usr/man \
+ --sysconfdir=/etc/conf.d \
+ --localstatedir=/var \
+ --with-global-cfg=/etc/conf.d/quakeforge.conf \
+ --with-sharepath=/usr/share/application-data/quake \
+ --with-userpath=~/.local/share/quake \
+ --with-plugin-path=/usr/libexec/quakeforge \
+ --disable-xmms \
+ --disable-oss \
+ --disable-dga \
+ --enable-xdg \
+ --with-clients="sgl,glx"
+make
+
+# Install
+make install DESTDIR=$PKG
+mkdir -p $PKG/install $PKG/usr/doc/$NAME-$VERSION $PKG/usr/share/applications \
+ $PKG/usr/share/pixmaps
+cat > $PKG/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+          |-----handy-ruler------------------------------------------------------|
+quakeforge: quakeforge (Quake engine)
+quakeforge:
+quakeforge: An enhanced Quake engine.
+quakeforge:
+quakeforge:
+quakeforge:
+quakeforge:
+quakeforge:
+quakeforge:
+quakeforge:
+quakeforge:
+EOF
+
+cat > $PKG/install/slack-required <<EOF
+sdl >= 1.2.14-i486-1
+alsa_libs >= 1.0.23-i486-1
+EOF
+
+uudecode quake.uu
+install -m 0644 -g 0 -o 0 quake.png \
+ $PKG/usr/share/pixmaps
+
+install -m 0644 -g 0 -o 0 NEWS \
+ $PKG/usr/doc/$NAME-$VERSION
+
+xz -9f \
+ $PKG/usr/doc/$NAME-$VERSION/NEWS
+
+chmod 0444 $PKG/usr/man/man?/*.?
+xz -9f $PKG/usr/man/man?/*.?
+
+rm -f \
+ $PKG/usr/lib/*.la \
+ $PKG/usr/libexec/*/*.la \
+ $PKG/usr/libexec/*/*/*.la
+
+strip --strip-unneeded \
+ $PKG/usr/lib/*.so* \
+ $PKG/usr/libexec/*/*.so* \
+ $PKG/usr/libexec/*/*/*.so* || :
+
+strip \
+ $PKG/usr/bin/* || :
+
+chown -R root.root $PKG
+
+# Make package
+cd $PKG
+cat install/slack-desc | grep "$NAME:" > /tmp/$NAME-$VERSION-$ARCH-$BUILD.txt
+makepkg -l y -c n /tmp/$NAME-$VERSION-$ARCH-$BUILD.txz
diff --git a/games/scummvm/scummvm.build b/games/scummvm/scummvm.build
new file mode 100755
index 0000000..e914c3e
--- /dev/null
+++ b/games/scummvm/scummvm.build
@@ -0,0 +1,65 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=scummvm
+VERSION=1.5.0
+BUILD=1
+DEPENDS=('sdl >= 1.2.15-1' 'freetype >= 2.4.11-1' 'libmad >= 0.15.1b-1' 'libvorbis >= 1.3.3-1' 'flac >= 1.2.1-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: scummvm
+${NAME}:
+${NAME}: A program which allows to run certain classic graphical
+${NAME}: point-and-click adventure games, provided you already have their data
+${NAME}: files. The clever part about this: ScummVM just replaces the
+${NAME}: executables shipped with the games, allowing you to play them on
+${NAME}: systems for which they were never designed!
+${NAME}:
+${NAME}: Homepage: http://www.scummvm.org
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=${URL[sf]}/scummvm/${SRCNAME[0]}/${SRCVERS[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.bz2
+SRCCOPY[0]="GPL2 LGPL21 BSD3"
+
+build0()
+{
+CPPFLAGS="-I${SYS_DIR[include]}/mad" \
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --enable-verbose-build \
+ --enable-release-mode \
+ --default-dynamic \
+ --disable-debug \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --docdir="${SYS_DIR[doc]}/${SRCNAME[0]}-${SRCVERS[0]}" \
+ --libdir="${SYS_DIR[lib]}/plugins" \
+ --datadir="${SYS_DIR[share]}/application-data/${SRCNAME[0]}" \
+ --backend=sdl \
+ --enable-plugins \
+ --enable-all-engines
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog NEWS
+chmod 0755 ${PKG}${SYS_DIR[lib]}/plugins/scummvm/*.so
+}
diff --git a/games/tetrix/tetrix-2.3-makefile.patch.xz b/games/tetrix/tetrix-2.3-makefile.patch.xz
new file mode 100644
index 0000000..a7c8972
Binary files /dev/null and b/games/tetrix/tetrix-2.3-makefile.patch.xz differ
diff --git a/games/tetrix/tetrix.build b/games/tetrix/tetrix.build
new file mode 100755
index 0000000..e8fb08e
--- /dev/null
+++ b/games/tetrix/tetrix.build
@@ -0,0 +1,47 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=tetrix
+VERSION=2.3
+BUILD=2
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: tetrix
+${NAME}:
+${NAME}: A console version of Tetris.
+${NAME}:
+${NAME}: Tetrix was written by Quentin Neill and Eric S. Raymond.
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://catb.org/~esr/${SRCNAME[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+make ${JOBS} OPTS="${FLAGS}"
+make install DESTDIR="${PKG}" MANDIR="${SYS_DIR[man]}"
+doc README
+}
diff --git a/games/vor/vor-0.5.5-desktop.patch.xz b/games/vor/vor-0.5.5-desktop.patch.xz
new file mode 100644
index 0000000..a3e2ca2
Binary files /dev/null and b/games/vor/vor-0.5.5-desktop.patch.xz differ
diff --git a/games/vor/vor.build b/games/vor/vor.build
new file mode 100755
index 0000000..0650bb7
--- /dev/null
+++ b/games/vor/vor.build
@@ -0,0 +1,62 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=vor
+VERSION=0.5.5
+BUILD=2
+DEPENDS=('sdl >= 1.2.15-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: vor (Variations on Rockdodger)
+${NAME}:
+${NAME}: Dodge the asteroids with your spacecraft.
+${NAME}:
+${NAME}: Homepage: http://jasonwoof.org/vor
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://qualdan.com/vor/${SRCNAME[0]}-${SRCVERS[0]}.tar.bz2
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+LDFLAGS="-lm" \
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --datadir="${SYS_DIR[share]}/application-data"
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc README
+install.dir ${PKG}${SYS_DIR[share]}/applications
+install.dat vor.desktop ${PKG}${SYS_DIR[share]}/applications
+install.dir ${PKG}${SYS_DIR[share]}/icons/hicolor/48x48/apps
+install.dat vor.png ${PKG}${SYS_DIR[share]}/icons/hicolor/48x48/apps
+}
diff --git a/games/xfishtank/xfishtank-2.2-debian23.patch.bz2 b/games/xfishtank/xfishtank-2.2-debian23.patch.bz2
new file mode 100644
index 0000000..c30f4a4
Binary files /dev/null and b/games/xfishtank/xfishtank-2.2-debian23.patch.bz2 differ
diff --git a/games/xfishtank/xfishtank-2.2-imake.patch.bz2 b/games/xfishtank/xfishtank-2.2-imake.patch.bz2
new file mode 100644
index 0000000..0c20944
Binary files /dev/null and b/games/xfishtank/xfishtank-2.2-imake.patch.bz2 differ
diff --git a/games/xfishtank/xfishtank.SlackBuild b/games/xfishtank/xfishtank.SlackBuild
new file mode 100755
index 0000000..003e56f
--- /dev/null
+++ b/games/xfishtank/xfishtank.SlackBuild
@@ -0,0 +1,85 @@
+#!/bin/sh
+
+CWD=`pwd`
+NAME=xfishtank
+VERSION=2.2
+ARCH=i586
+BUILD=1
+PKGNAME=$NAME
+PKGVER=$VERSION
+BASEDIR=$PKGNAME-$PKGVER.orig
+ARCHIVE=$PKGNAME-$PKGVER.tar.gz
+REPOSITORY=ftp://ftp.uni-koeln.de/windows/xcontrib
+FLAGS="-O2 -march=pentium -mcpu=pentium -fno-strength-reduce \
+ -fomit-frame-pointer -ffast-math"
+PKG=/tmp/package-$NAME
+
+rm -rf $PKG
+mkdir -p $PKG
+
+# Obtain sources
+if [ ! -e $ARCHIVE ]; then
+  if `wget "$REPOSITORY/$ARCHIVE"`; then
+    true
+  else
+    exit 1
+  fi
+fi
+
+# Compile
+cd /tmp
+tar zxvf $CWD/$ARCHIVE
+cd $BASEDIR
+bzcat $CWD/$NAME-$VERSION-debian23.patch.bz2 | patch -p1 -s
+bzcat $CWD/$NAME-$VERSION-imake.patch.bz2 | patch -p1 -s
+xmkmf -a
+make OPT="$FLAGS"
+
+# Install
+make install DESTDIR=$PKG
+mkdir -p $PKG/install $PKG/usr/doc/$NAME-$VERSION $PKG/usr/X11R6/man/man6 \
+ $PKG/usr/X11R6/bin
+cat > $PKG/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+         |-----handy-ruler------------------------------------------------------|
+xfishtank: xfishtank
+xfishtank:
+xfishtank: Xfishtank displays a virtual aquarium on your X root window. There
+xfishtank: are many sorts of fish swimming happily among bubbles. A great way to
+xfishtank: relax while you are messing with your computer. Furthermore the fish
+xfishtank: require very little maintenance and feeding.
+xfishtank:
+xfishtank:
+xfishtank:
+xfishtank:
+xfishtank:
+EOF
+
+cat > $PKG/install/slack-required <<EOF
+x11 >= 6.8.1-486-1
+EOF
+
+install -m644 -g0 -o0 README README.Linux README.TrueColor \
+ $PKG/usr/doc/$NAME-$VERSION
+
+install -m444 -g0 -o0 xfishtank.1x $PKG/usr/X11R6/man/man6/xfishtank.6x
+
+install -m755 -g0 -o0 xfishtank $PKG/usr/X11R6/bin
+
+gzip -9nf $PKG/usr/X11R6/man/man?/*.?x
+
+strip $PKG/usr/X11R6/bin/* || :
+
+chown -R root.root $PKG
+chgrp bin $PKG/usr/X11R6/bin $PKG/usr/X11R6/bin/*
+
+# Make package
+cd $PKG
+cat install/slack-desc | grep "$NAME:" > /tmp/$NAME-$VERSION-$ARCH-$BUILD.txt
+makepkg -l y -c n /tmp/$NAME-$VERSION-$ARCH-$BUILD.tgz
diff --git a/games/xmountains/xmountains-2.7-imake.patch.bz2 b/games/xmountains/xmountains-2.7-imake.patch.bz2
new file mode 100644
index 0000000..4a821c7
Binary files /dev/null and b/games/xmountains/xmountains-2.7-imake.patch.bz2 differ
diff --git a/games/xmountains/xmountains.SlackBuild b/games/xmountains/xmountains.SlackBuild
new file mode 100755
index 0000000..ea42a34
--- /dev/null
+++ b/games/xmountains/xmountains.SlackBuild
@@ -0,0 +1,84 @@
+#!/bin/sh
+
+CWD=`pwd`
+NAME=xmountains
+VERSION=2.7
+ARCH=i586
+BUILD=1
+PKGNAME=$NAME
+PKGVER=$VERSION
+BASEDIR=$PKGNAME-$PKGVER
+ARCHIVE="$PKGNAME"_"$PKGVER".tar.gz
+REPOSITORY=http://www.epcc.ed.ac.uk/~spb/xmountains
+FLAGS="-O2 -march=pentium -mcpu=pentium -fno-strength-reduce \
+ -fomit-frame-pointer -ffast-math"
+PKG=/tmp/package-$NAME
+
+rm -rf $PKG
+mkdir -p $PKG
+
+# Obtain sources
+if [ ! -e $ARCHIVE ]; then
+  if `wget "$REPOSITORY/$ARCHIVE"`; then
+    true
+  else
+    exit 1
+  fi
+fi
+
+# Compile
+cd /tmp
+mkdir $BASEDIR
+cd $BASEDIR
+tar zxvf $CWD/$ARCHIVE
+bzcat $CWD/$NAME-$VERSION-imake.patch.bz2 | patch -p1 -s
+xmkmf -a
+make OPT="$FLAGS"
+
+# Install
+make install DESTDIR=$PKG
+mkdir -p $PKG/install $PKG/usr/doc/$NAME-$VERSION $PKG/usr/X11R6/man/man6 \
+ $PKG/usr/X11R6/bin
+cat > $PKG/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+          |-----handy-ruler------------------------------------------------------|
+xmountains: xmountains
+xmountains:
+xmountains: Xmountains is a fractal landscape generator for X. In other words it
+xmountains: draws mountains in a random manner. The generated mountains
+xmountains: continuously extend to the right. It can make a nice screensaver or
+xmountains: also an active background for your desktop.
+xmountains:
+xmountains:
+xmountains:
+xmountains:
+xmountains:
+EOF
+
+cat > $PKG/install/slack-required <<EOF
+xfree86 >= 4.3.0-486-5
+EOF
+
+install -m644 -g0 -o0 README $PKG/usr/doc/$NAME-$VERSION
+
+install -m444 -g0 -o0 xmountains.man $PKG/usr/X11R6/man/man6/xmountains.6x
+
+install -m755 -g0 -o0 xmountains $PKG/usr/X11R6/bin
+
+gzip -9nf $PKG/usr/X11R6/man/man?/*.?x
+
+strip $PKG/usr/X11R6/bin/* || :
+
+chown -R root.root $PKG
+chgrp bin $PKG/usr/X11R6/bin $PKG/usr/X11R6/bin/*
+
+# Make package
+cd $PKG
+cat install/slack-desc | grep "$NAME:" > /tmp/$NAME-$VERSION-$ARCH-$BUILD.txt
+makepkg -l y -c n /tmp/$NAME-$VERSION-$ARCH-$BUILD.tgz
diff --git a/games/xpenguins/xpenguins-2.2-icon.patch.bz2 b/games/xpenguins/xpenguins-2.2-icon.patch.bz2
new file mode 100644
index 0000000..decb626
Binary files /dev/null and b/games/xpenguins/xpenguins-2.2-icon.patch.bz2 differ
diff --git a/games/xpenguins/xpenguins.SlackBuild b/games/xpenguins/xpenguins.SlackBuild
new file mode 100755
index 0000000..105cc7d
--- /dev/null
+++ b/games/xpenguins/xpenguins.SlackBuild
@@ -0,0 +1,119 @@
+#!/bin/sh
+
+CWD=`pwd`
+NAME=xpenguins
+VERSION=2.2
+ARCH=i586
+BUILD=1
+PKGNAME=$NAME
+PKGVER=$VERSION
+BASEDIR=$PKGNAME-$PKGVER
+ARCHIVE=$BASEDIR.tar.gz
+THEMES="$NAME"_themes-1.0.tar.gz
+REPOSITORY=http://xpenguins.seul.org
+FLAGS="-O2 -march=pentium -mcpu=pentium -fno-strength-reduce \
+ -fomit-frame-pointer -ffast-math"
+PKG=/tmp/package-$NAME
+
+rm -rf $PKG
+mkdir -p $PKG
+
+# Obtain sources
+if [ ! -e $ARCHIVE ]; then
+  if `wget "$REPOSITORY/$ARCHIVE"`; then
+    true
+  else
+    exit 1
+  fi
+fi
+if [ ! -e $THEMES ]; then
+  if `wget "$REPOSITORY/$ARCHIVE"`; then
+    true
+  else
+    exit 1
+  fi
+fi
+
+# Compile
+cd /tmp
+tar zxvf $CWD/$ARCHIVE
+cd $BASEDIR
+bzcat $CWD/$NAME-$VERSION-icon.patch.bz2 | patch -p1 -s
+CFLAGS=$FLAGS CXXFLAGS=$FLAGS ./configure --prefix=/usr \
+ --bindir=/usr/X11R6/bin --mandir=/usr/X11R6/man --datadir=/usr/share/games
+make
+
+# Install
+make install DESTDIR=$PKG
+mkdir -p $PKG/install $PKG/usr/doc/$NAME-$VERSION $PKG/etc/X11/icons \
+ $PKG/etc/X11/apps/Games/Desktop
+cat > $PKG/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+         |-----handy-ruler------------------------------------------------------|
+xpenguins: xpenguins
+xpenguins:
+xpenguins: Xpenguins makes little penguins invade your X screen. They fly, run
+xpenguins: on your windows and do all sorts of weird things. If you have some
+xpenguins: spare time, this can be what you are looking for, but you can also
+xpenguins: amaze your friends with this wonder. If somehow you don't like
+xpenguins: penguins, there are other themes included in this package.
+xpenguins:
+xpenguins:
+xpenguins:
+xpenguins:
+EOF
+
+cat > $PKG/install/slack-required <<EOF
+x11 >= 6.8.1-i486-1
+EOF
+
+cat > $PKG/etc/X11/apps/Games/Desktop/Xpenguins.desktop <<EOF
+[Desktop Entry]
+
+Encoding=UTF-8
+Name=X Penguins
+GenericName=Penguins
+GenericName[fr]=Pingouins
+Type=Application
+Exec=xpenguins
+Icon=/etc/X11/icons/Xpenguins.png
+Terminal=0
+
+X-KDE-StartupNotify=false
+
+Comment=Penguins on your desktop
+Comment[fr]=Des pingouins sur votre bureau
+EOF
+
+uudecode xpenguins.uu
+install -m644 -g0 -o0 Xpenguins.png $PKG/etc/X11/icons
+
+install -m644 -g0 -o0 AUTHORS ChangeLog README \
+ $PKG/usr/doc/$NAME-$VERSION
+
+mv $PKG/usr/X11R6/man/man1/xpenguins.1 \
+ $PKG/usr/X11R6/man/man1/xpenguins.1x
+
+chmod 444 $PKG/usr/X11R6/man/man?/*.?x
+gzip -9nf $PKG/usr/X11R6/man/man?/*.?x
+
+strip $PKG/usr/X11R6/bin/* || :
+
+(
+  cd $PKG/usr/share/games/xpenguins
+  tar zxvf $CWD/$THEMES
+)
+
+chown -R root.root $PKG
+chgrp bin $PKG/usr/X11R6/bin $PKG/usr/X11R6/bin/*
+
+# Make package
+cd $PKG
+cat install/slack-desc | grep "$NAME:" > /tmp/$NAME-$VERSION-$ARCH-$BUILD.txt
+makepkg -l y -c n /tmp/$NAME-$VERSION-$ARCH-$BUILD.tgz
-- 
cgit v1.2.3-70-g09d2