From d150a5f3e462fa7fe194a805a4aa0076f4d03ab9 Mon Sep 17 00:00:00 2001
From: Deposite Pirate
Date: Sun, 16 Sep 2018 18:48:36 +0200
Subject: Add ports.

---
 network/aircrackng/aircrack-ng-1.1-flags.patch.xz  | Bin 0 -> 420 bytes
 network/aircrackng/aircrackng.build                |  49 ++++++
 network/bluetoothapplet/bluetoothapplet.build      |  85 ++++++++++
 .../gnome-bluetooth-3.8.0-xfce.patch.xz            | Bin 0 -> 460 bytes
 .../bridge_utils-1.2-autoconf.patch.bz2            | Bin 0 -> 37423 bytes
 .../bridge_utils-1.2-compile.patch.bz2             | Bin 0 -> 284 bytes
 network/bridge_utils/bridge_utils.SlackBuild       |  82 ++++++++++
 network/centerim/centerim.SlackBuild               | 106 +++++++++++++
 network/ebtables/ebtables-2.0.6-makefile.patch.bz2 | Bin 0 -> 627 bytes
 network/ebtables/ebtables.SlackBuild               |  75 +++++++++
 network/ezipupdate/ezipupdate.SlackBuild           |  74 +++++++++
 network/grsync/grsync.build                        |  59 +++++++
 network/hexchat/hexchat-2.10.0-nodebug.patch.xz    | Bin 0 -> 584 bytes
 .../hexchat/hexchat-2.10.0-nodeftrayicon.patch.xz  | Bin 0 -> 296 bytes
 network/hexchat/hexchat-2.10.0-separator.patch.xz  | Bin 0 -> 524 bytes
 network/hexchat/hexchat-2.10.0-sysconf.patch.xz    | Bin 0 -> 488 bytes
 network/hexchat/hexchat.build                      |  68 ++++++++
 network/httping/httping-2.2.1-cmake.patch.xz       | Bin 0 -> 1176 bytes
 network/httping/httping.build                      |  53 +++++++
 network/iftop/iftop-1.0pre2-desktop.patch.xz       | Bin 0 -> 452 bytes
 network/iftop/iftop.build                          |  62 ++++++++
 .../iptraf-ng-1.1.3.1-notokenring.patch.xz         | Bin 0 -> 1544 bytes
 .../iptraf_ng/iptraf-ng-1.1.3.1-rundir.patch.xz    | Bin 0 -> 264 bytes
 network/iptraf_ng/iptraf_ng.build                  |  64 ++++++++
 network/iptstate/iptstate.build                    |  47 ++++++
 .../kismet-20130211-alertsyslogmfile.patch.xz      | Bin 0 -> 432 bytes
 network/kismet/kismet-20130211-desktop.patch.xz    | Bin 0 -> 2456 bytes
 network/kismet/kismet.build                        | 100 ++++++++++++
 network/lftp/lftp-4.5.2-color.patch.xz             | Bin 0 -> 560 bytes
 network/lftp/lftp.build                            |  87 ++++++++++
 network/msmtp/msmtp.SlackBuild                     |  97 ++++++++++++
 network/mtr/mtr-0.84-desktop.patch.xz              | Bin 0 -> 3616 bytes
 network/mtr/mtr-0.84-notermcap.patch.xz            | Bin 0 -> 340 bytes
 network/mtr/mtr.build                              |  63 ++++++++
 network/mutt-kz/mutt-kz-20130515-config.patch.xz   | Bin 0 -> 1144 bytes
 network/mutt-kz/mutt-kz.build                      | 114 ++++++++++++++
 network/ncdc/ncdc.build                            |  58 +++++++
 network/ncrack/ncrack.SlackBuild                   | 102 ++++++++++++
 network/nessus/nessus-core-2.3.1-error.patch.bz2   | Bin 0 -> 230 bytes
 network/nessus/nessus.build                        | 136 ++++++++++++++++
 network/nethogs/nethogs-0.8.0-geteuid.patch.xz     | Bin 0 -> 3200 bytes
 network/nethogs/nethogs-0.8.0-makefile.patch.xz    | Bin 0 -> 480 bytes
 network/nethogs/nethogs.build                      |  49 ++++++
 .../netpipes/netpipes-4.2-export-install.patch.xz  | Bin 0 -> 600 bytes
 network/netpipes/netpipes.build                    |  46 ++++++
 network/netwatch/netwatch-1.3.0-install.patch.xz   | Bin 0 -> 596 bytes
 .../netwatch/netwatch-1.3.0-phonemyself.patch.xz   | Bin 0 -> 300 bytes
 network/netwatch/netwatch.build                    |  55 +++++++
 ...rk-manager-applet-0.9.8.2-xfcesettings.patch.xz | Bin 0 -> 360 bytes
 .../networkmanagerapplet.build                     |  85 ++++++++++
 network/ngrep/ngrep-1.45-fixipv6.patch.xz          | Bin 0 -> 460 bytes
 network/ngrep/ngrep-1.45-install.patch.xz          | Bin 0 -> 308 bytes
 network/ngrep/ngrep-1.45-nodebug.patch.xz          | Bin 0 -> 536 bytes
 network/ngrep/ngrep-1.45-usesystempcre.patch.xz    | Bin 0 -> 796 bytes
 network/ngrep/ngrep.build                          |  62 ++++++++
 network/nload/nload.build                          |  58 +++++++
 network/nmap/nmap-6.25-pcaplink.patch.xz           | Bin 0 -> 676 bytes
 network/nmap/nmap.build                            |  75 +++++++++
 network/openobex/openobex.build                    | 126 +++++++++++++++
 network/openssh/openssh-6.2p1-systemd.patch.xz     | Bin 0 -> 760 bytes
 network/openssh/openssh-6.2p1-sysvinit.patch.xz    | Bin 0 -> 880 bytes
 network/openssh/openssh-6.2p1-tmpfilesd.patch.xz   | Bin 0 -> 248 bytes
 network/openssh/openssh.build                      | 122 ++++++++++++++
 network/pidgin/pbar-0.3-makefile.patch.xz          | Bin 0 -> 396 bytes
 .../pidgin/pidgin-nudge-20101006-makefile.patch.xz | Bin 0 -> 696 bytes
 network/pidgin/pidgin.build                        | 175 +++++++++++++++++++++
 network/pidgin_tox/pidgin_tox.build                |  62 ++++++++
 network/pktstat/pktstat-1.8.5-notermcap.patch.xz   | Bin 0 -> 312 bytes
 network/pktstat/pktstat.build                      |  56 +++++++
 network/rdesktop/rdesktop.build                    |  63 ++++++++
 network/reaver/reaver-1.4-includes.patch.xz        | Bin 0 -> 296 bytes
 network/reaver/reaver.build                        |  66 ++++++++
 network/rsync/rsync.build                          |  56 +++++++
 network/silc/silc-toolkit-1.1.3-heimdal.patch.bz2  | Bin 0 -> 891 bytes
 network/silc/silc-toolkit-1.1.3-nodebug.patch.bz2  | Bin 0 -> 952 bytes
 network/silc/silc.build                            |  89 +++++++++++
 network/skype/skype.build                          |  60 +++++++
 network/snmp/net-snmp-5.7.2-config.patch.xz        | Bin 0 -> 4832 bytes
 ...et-snmp-5.7.2-createv3useretcsnmpdconf.patch.xz | Bin 0 -> 352 bytes
 network/snmp/net-snmp-5.7.2-libnl32.patch.xz       | Bin 0 -> 1100 bytes
 network/snmp/net-snmp-5.7.2-systemd.patch.xz       | Bin 0 -> 460 bytes
 network/snmp/net-snmp-5.7.2-sysvinit.patch.xz      | Bin 0 -> 704 bytes
 network/snmp/snmp.build                            | 106 +++++++++++++
 network/snownews/snownews-1.5.12-cflags.patch.xz   | Bin 0 -> 364 bytes
 network/stunnel/stunnel-4.56-config.patch.xz       | Bin 0 -> 764 bytes
 network/stunnel/stunnel-4.56-genkey.patch.xz       | Bin 0 -> 360 bytes
 network/stunnel/stunnel-4.56-nopemgen.patch.xz     | Bin 0 -> 404 bytes
 network/stunnel/stunnel-4.56-tmpfilesd.patch.xz    | Bin 0 -> 212 bytes
 network/stunnel/stunnel.build                      | 121 ++++++++++++++
 .../sylpheed/sylpheed-3.4.1-desktopfile.patch.xz   | Bin 0 -> 696 bytes
 network/sylpheed/sylpheed.build                    | 100 ++++++++++++
 network/teamspeak/teamspeak.build                  |  78 +++++++++
 network/tor/tor-0.2.4.21-config.patch.xz           | Bin 0 -> 3796 bytes
 network/tor/tor-0.2.4.21-datadir.patch.xz          | Bin 0 -> 712 bytes
 network/tor/tor-0.2.4.21-logrotate.patch.xz        | Bin 0 -> 324 bytes
 network/tor/tor-0.2.4.21-systemd.patch.xz          | Bin 0 -> 396 bytes
 network/tor/tor.build                              | 153 ++++++++++++++++++
 .../tor/torsocks-2.0.0.20140506-libpath.patch.xz   | Bin 0 -> 416 bytes
 network/tox/tox.build                              |  65 ++++++++
 network/toxic/toxic-20140815-ncurseswlink.patch.xz | Bin 0 -> 572 bytes
 network/toxic/toxic-20140815-nomanz.patch.xz       | Bin 0 -> 308 bytes
 network/toxic/toxic.build                          |  56 +++++++
 .../transmission-2.82-appdatadir.patch.xz          | Bin 0 -> 364 bytes
 network/transmission/transmission.build            |  64 ++++++++
 network/uget/uget.build                            |  57 +++++++
 network/ulogd/ulogd-20070907-heimdal.patch.bz2     | Bin 0 -> 2032 bytes
 network/ulogd/ulogd-20070907-paths.patch.bz2       | Bin 0 -> 768 bytes
 network/ulogd/ulogd.SlackBuild                     | 108 +++++++++++++
 network/utox/utox-20140815-makefile.patch.xz       | Bin 0 -> 380 bytes
 network/utox/utox.build                            |  65 ++++++++
 network/wavemon/wavemon.build                      |  57 +++++++
 network/weechat/weechat-0.4.3-desktop.patch.xz     | Bin 0 -> 432 bytes
 .../weechat/weechat-0.4.3-gcryptcflags.patch.xz    | Bin 0 -> 348 bytes
 network/weechat/weechat-0.4.3-libdir.patch.xz      | Bin 0 -> 1660 bytes
 network/weechat/weechat-0.4.3-pkgconfig.patch.xz   | Bin 0 -> 572 bytes
 network/weechat/weechat.build                      |  62 ++++++++
 network/weex/weex.SlackBuild                       |  78 +++++++++
 network/wget/wget-1.14-slackware.patch.xz          | Bin 0 -> 432 bytes
 network/wget/wget.build                            |  72 +++++++++
 network/wireshark/wireshark-1.10.0-podfix.patch.xz | Bin 0 -> 356 bytes
 network/wireshark/wireshark.build                  |  94 +++++++++++
 121 files changed, 4222 insertions(+)
 create mode 100644 network/aircrackng/aircrack-ng-1.1-flags.patch.xz
 create mode 100755 network/aircrackng/aircrackng.build
 create mode 100755 network/bluetoothapplet/bluetoothapplet.build
 create mode 100644 network/bluetoothapplet/gnome-bluetooth-3.8.0-xfce.patch.xz
 create mode 100644 network/bridge_utils/bridge_utils-1.2-autoconf.patch.bz2
 create mode 100644 network/bridge_utils/bridge_utils-1.2-compile.patch.bz2
 create mode 100755 network/bridge_utils/bridge_utils.SlackBuild
 create mode 100755 network/centerim/centerim.SlackBuild
 create mode 100644 network/ebtables/ebtables-2.0.6-makefile.patch.bz2
 create mode 100755 network/ebtables/ebtables.SlackBuild
 create mode 100755 network/ezipupdate/ezipupdate.SlackBuild
 create mode 100755 network/grsync/grsync.build
 create mode 100644 network/hexchat/hexchat-2.10.0-nodebug.patch.xz
 create mode 100644 network/hexchat/hexchat-2.10.0-nodeftrayicon.patch.xz
 create mode 100644 network/hexchat/hexchat-2.10.0-separator.patch.xz
 create mode 100644 network/hexchat/hexchat-2.10.0-sysconf.patch.xz
 create mode 100755 network/hexchat/hexchat.build
 create mode 100644 network/httping/httping-2.2.1-cmake.patch.xz
 create mode 100755 network/httping/httping.build
 create mode 100644 network/iftop/iftop-1.0pre2-desktop.patch.xz
 create mode 100755 network/iftop/iftop.build
 create mode 100644 network/iptraf_ng/iptraf-ng-1.1.3.1-notokenring.patch.xz
 create mode 100644 network/iptraf_ng/iptraf-ng-1.1.3.1-rundir.patch.xz
 create mode 100755 network/iptraf_ng/iptraf_ng.build
 create mode 100755 network/iptstate/iptstate.build
 create mode 100644 network/kismet/kismet-20130211-alertsyslogmfile.patch.xz
 create mode 100644 network/kismet/kismet-20130211-desktop.patch.xz
 create mode 100755 network/kismet/kismet.build
 create mode 100644 network/lftp/lftp-4.5.2-color.patch.xz
 create mode 100755 network/lftp/lftp.build
 create mode 100755 network/msmtp/msmtp.SlackBuild
 create mode 100644 network/mtr/mtr-0.84-desktop.patch.xz
 create mode 100644 network/mtr/mtr-0.84-notermcap.patch.xz
 create mode 100755 network/mtr/mtr.build
 create mode 100644 network/mutt-kz/mutt-kz-20130515-config.patch.xz
 create mode 100755 network/mutt-kz/mutt-kz.build
 create mode 100755 network/ncdc/ncdc.build
 create mode 100755 network/ncrack/ncrack.SlackBuild
 create mode 100644 network/nessus/nessus-core-2.3.1-error.patch.bz2
 create mode 100755 network/nessus/nessus.build
 create mode 100644 network/nethogs/nethogs-0.8.0-geteuid.patch.xz
 create mode 100644 network/nethogs/nethogs-0.8.0-makefile.patch.xz
 create mode 100755 network/nethogs/nethogs.build
 create mode 100644 network/netpipes/netpipes-4.2-export-install.patch.xz
 create mode 100755 network/netpipes/netpipes.build
 create mode 100644 network/netwatch/netwatch-1.3.0-install.patch.xz
 create mode 100644 network/netwatch/netwatch-1.3.0-phonemyself.patch.xz
 create mode 100755 network/netwatch/netwatch.build
 create mode 100644 network/networkmanagerapplet/network-manager-applet-0.9.8.2-xfcesettings.patch.xz
 create mode 100755 network/networkmanagerapplet/networkmanagerapplet.build
 create mode 100644 network/ngrep/ngrep-1.45-fixipv6.patch.xz
 create mode 100644 network/ngrep/ngrep-1.45-install.patch.xz
 create mode 100644 network/ngrep/ngrep-1.45-nodebug.patch.xz
 create mode 100644 network/ngrep/ngrep-1.45-usesystempcre.patch.xz
 create mode 100755 network/ngrep/ngrep.build
 create mode 100755 network/nload/nload.build
 create mode 100644 network/nmap/nmap-6.25-pcaplink.patch.xz
 create mode 100755 network/nmap/nmap.build
 create mode 100755 network/openobex/openobex.build
 create mode 100644 network/openssh/openssh-6.2p1-systemd.patch.xz
 create mode 100644 network/openssh/openssh-6.2p1-sysvinit.patch.xz
 create mode 100644 network/openssh/openssh-6.2p1-tmpfilesd.patch.xz
 create mode 100755 network/openssh/openssh.build
 create mode 100644 network/pidgin/pbar-0.3-makefile.patch.xz
 create mode 100644 network/pidgin/pidgin-nudge-20101006-makefile.patch.xz
 create mode 100755 network/pidgin/pidgin.build
 create mode 100755 network/pidgin_tox/pidgin_tox.build
 create mode 100644 network/pktstat/pktstat-1.8.5-notermcap.patch.xz
 create mode 100755 network/pktstat/pktstat.build
 create mode 100755 network/rdesktop/rdesktop.build
 create mode 100644 network/reaver/reaver-1.4-includes.patch.xz
 create mode 100755 network/reaver/reaver.build
 create mode 100755 network/rsync/rsync.build
 create mode 100644 network/silc/silc-toolkit-1.1.3-heimdal.patch.bz2
 create mode 100644 network/silc/silc-toolkit-1.1.3-nodebug.patch.bz2
 create mode 100755 network/silc/silc.build
 create mode 100755 network/skype/skype.build
 create mode 100644 network/snmp/net-snmp-5.7.2-config.patch.xz
 create mode 100644 network/snmp/net-snmp-5.7.2-createv3useretcsnmpdconf.patch.xz
 create mode 100644 network/snmp/net-snmp-5.7.2-libnl32.patch.xz
 create mode 100644 network/snmp/net-snmp-5.7.2-systemd.patch.xz
 create mode 100644 network/snmp/net-snmp-5.7.2-sysvinit.patch.xz
 create mode 100755 network/snmp/snmp.build
 create mode 100644 network/snownews/snownews-1.5.12-cflags.patch.xz
 create mode 100644 network/stunnel/stunnel-4.56-config.patch.xz
 create mode 100644 network/stunnel/stunnel-4.56-genkey.patch.xz
 create mode 100644 network/stunnel/stunnel-4.56-nopemgen.patch.xz
 create mode 100644 network/stunnel/stunnel-4.56-tmpfilesd.patch.xz
 create mode 100755 network/stunnel/stunnel.build
 create mode 100644 network/sylpheed/sylpheed-3.4.1-desktopfile.patch.xz
 create mode 100755 network/sylpheed/sylpheed.build
 create mode 100755 network/teamspeak/teamspeak.build
 create mode 100644 network/tor/tor-0.2.4.21-config.patch.xz
 create mode 100644 network/tor/tor-0.2.4.21-datadir.patch.xz
 create mode 100644 network/tor/tor-0.2.4.21-logrotate.patch.xz
 create mode 100644 network/tor/tor-0.2.4.21-systemd.patch.xz
 create mode 100755 network/tor/tor.build
 create mode 100644 network/tor/torsocks-2.0.0.20140506-libpath.patch.xz
 create mode 100755 network/tox/tox.build
 create mode 100644 network/toxic/toxic-20140815-ncurseswlink.patch.xz
 create mode 100644 network/toxic/toxic-20140815-nomanz.patch.xz
 create mode 100755 network/toxic/toxic.build
 create mode 100644 network/transmission/transmission-2.82-appdatadir.patch.xz
 create mode 100755 network/transmission/transmission.build
 create mode 100755 network/uget/uget.build
 create mode 100644 network/ulogd/ulogd-20070907-heimdal.patch.bz2
 create mode 100644 network/ulogd/ulogd-20070907-paths.patch.bz2
 create mode 100755 network/ulogd/ulogd.SlackBuild
 create mode 100644 network/utox/utox-20140815-makefile.patch.xz
 create mode 100755 network/utox/utox.build
 create mode 100755 network/wavemon/wavemon.build
 create mode 100644 network/weechat/weechat-0.4.3-desktop.patch.xz
 create mode 100644 network/weechat/weechat-0.4.3-gcryptcflags.patch.xz
 create mode 100644 network/weechat/weechat-0.4.3-libdir.patch.xz
 create mode 100644 network/weechat/weechat-0.4.3-pkgconfig.patch.xz
 create mode 100755 network/weechat/weechat.build
 create mode 100755 network/weex/weex.SlackBuild
 create mode 100644 network/wget/wget-1.14-slackware.patch.xz
 create mode 100755 network/wget/wget.build
 create mode 100644 network/wireshark/wireshark-1.10.0-podfix.patch.xz
 create mode 100755 network/wireshark/wireshark.build

(limited to 'network')

diff --git a/network/aircrackng/aircrack-ng-1.1-flags.patch.xz b/network/aircrackng/aircrack-ng-1.1-flags.patch.xz
new file mode 100644
index 0000000..3c29081
Binary files /dev/null and b/network/aircrackng/aircrack-ng-1.1-flags.patch.xz differ
diff --git a/network/aircrackng/aircrackng.build b/network/aircrackng/aircrackng.build
new file mode 100755
index 0000000..97b7d84
--- /dev/null
+++ b/network/aircrackng/aircrackng.build
@@ -0,0 +1,49 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=aircrackng
+VERSION=1.1
+BUILD=2
+DEPENDS=('tcpip >= 20130209-1' 'wireless >= 20130122-1' 'sqlite >= 3.7.15.2-1' 'openssl >= 1.0.1d-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: aircrackng (security tool)
+${NAME}:
+${NAME}: Aircrack-ng is an 802.11 WEP and WPA-PSK keys cracking program that
+${NAME}: can ecover keys once enough data packets have been captured. It
+${NAME}: implements the standard FMS attack along with some optimizations
+${NAME}: like KoreK attacks, as well as the all-new PTW attack, thus making
+${NAME}: the attack much faster compared to other WEP cracking tools. In
+${NAME}: fact, Aircrack-ng is a set of tools for auditing wireless networks.
+${NAME}:
+${NAME}: Homepage: http://www.aircrack-ng.org
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=aircrack-ng
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://download.aircrack-ng.org/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+make ${JOBS} COMMON_FLAGS="${FLAGS}" SQLITE="true" prefix="${SYS_DIR[usr]}" mandir="${SYS_DIR[man]}/man1"
+make install DESTDIR="${PKG}" prefix="${SYS_DIR[usr]}" mandir="${SYS_DIR[man]}/man1"
+doc AUTHORS
+changelog ChangeLog
+}
diff --git a/network/bluetoothapplet/bluetoothapplet.build b/network/bluetoothapplet/bluetoothapplet.build
new file mode 100755
index 0000000..482670d
--- /dev/null
+++ b/network/bluetoothapplet/bluetoothapplet.build
@@ -0,0 +1,85 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=bluetoothapplet
+MAJOR=3.8
+VERSION=${MAJOR}.0
+BUILD=1
+DEPENDS=('gtk+ >= 3.8.0-1' 'libnotify >= 0.7.5-1' 'bluetooth >= 4.101-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: bluetoothapplet
+${NAME}:
+${NAME}: Desktop tools for managing and manipulating Bluetooth devices.
+${NAME}:
+${NAME}: Homepage: https://live.gnome.org/GnomeBluetooth
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+cat > ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+if [ -x ${SYS_DIR[bin]}/update-desktop-database ]; then
+  ${SYS_DIR[bin]}/update-desktop-database -q
+fi
+
+if [ -x ${SYS_DIR[bin]}/gtk-update-icon-cache ]; then
+  ${SYS_DIR[bin]}/gtk-update-icon-cache -q -t -f ${SYS_DIR[share]}/icons/hicolor
+fi
+EOF
+
+# Sources
+
+SRCNAME[0]=gnome-bluetooth
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=${URL[gnome]}/${SRCNAME[0]}/${MAJOR}/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+SRCCOPY[0]="GPL2 LGPL21"
+
+build0()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.in
+sed -i 's|pkglibdir = $(libdir)/@PACKAGE@|pkglibdir = $(libdir)|g' $(find . -name "Makefile.in")
+sed -i 's|$(libdir)/gnome-bluetooth/plugins|$(libdir)/plugins/gnome-bluetooth|g' $(find . -name "Makefile.in")
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --disable-rpath \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-html-dir="${SYS_DIR[html]}" \
+ --disable-icon-update \
+ --disable-desktop-update
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog NEWS
+install.dir ${PKG}${SYS_DIR[share]}/Thunar/sendto
+install.dat thunar-sendto-bluetooth.desktop ${PKG}${SYS_DIR[share]}/Thunar/sendto
+# No development docs
+rm -rf ${PKG}${SYS_DIR[html]}
+}
diff --git a/network/bluetoothapplet/gnome-bluetooth-3.8.0-xfce.patch.xz b/network/bluetoothapplet/gnome-bluetooth-3.8.0-xfce.patch.xz
new file mode 100644
index 0000000..de80788
Binary files /dev/null and b/network/bluetoothapplet/gnome-bluetooth-3.8.0-xfce.patch.xz differ
diff --git a/network/bridge_utils/bridge_utils-1.2-autoconf.patch.bz2 b/network/bridge_utils/bridge_utils-1.2-autoconf.patch.bz2
new file mode 100644
index 0000000..33e68f7
Binary files /dev/null and b/network/bridge_utils/bridge_utils-1.2-autoconf.patch.bz2 differ
diff --git a/network/bridge_utils/bridge_utils-1.2-compile.patch.bz2 b/network/bridge_utils/bridge_utils-1.2-compile.patch.bz2
new file mode 100644
index 0000000..cd3a847
Binary files /dev/null and b/network/bridge_utils/bridge_utils-1.2-compile.patch.bz2 differ
diff --git a/network/bridge_utils/bridge_utils.SlackBuild b/network/bridge_utils/bridge_utils.SlackBuild
new file mode 100755
index 0000000..b7c7a6c
--- /dev/null
+++ b/network/bridge_utils/bridge_utils.SlackBuild
@@ -0,0 +1,82 @@
+#!/bin/sh
+
+CWD=`pwd`
+NAME=bridge_utils
+VERSION=1.2
+ARCH=i586
+BUILD=1
+PKGNAME=bridge-utils
+PKGVER=$VERSION
+BASEDIR=$PKGNAME-$PKGVER
+ARCHIVE=$BASEDIR.tar.gz
+REPOSITORY=http://belnet.dl.sourceforge.net/sourceforge/bridge
+FLAGS="-O2 -march=pentium -mtune=pentium -fno-strength-reduce \
+ -fomit-frame-pointer -ffast-math"
+PKG=/tmp/package-$NAME
+
+rm -rf $PKG
+mkdir -p $PKG
+
+# Obtain sources
+if [ ! -e $ARCHIVE ]; then
+  if `wget "$REPOSITORY/$ARCHIVE"`; then
+    true
+  else
+    exit 1
+  fi
+fi
+
+# Compile
+cd /tmp
+tar zxvf $CWD/$ARCHIVE
+cd $BASEDIR
+bzcat $CWD/$NAME-$VERSION-autoconf.patch.bz2 | patch -p1 -s
+bzcat $CWD/$NAME-$VERSION-compile.patch.bz2 | patch -p1 -s
+chmod 755 configure
+CFLAGS=$FLAGS CXXFLAGS=$FLAGS ./configure --prefix=/usr --mandir=/usr/man
+make
+
+# Install
+make install DESTDIR=$PKG
+mkdir -p $PKG/install $PKG/usr/doc/$NAME-$VERSION
+cat > $PKG/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+            |-----handy-ruler------------------------------------------------------|
+bridge_utils: Network bridging utilities
+bridge_utils:
+bridge_utils: This package contains the the brctl(8) utility needed to control a
+bridge_utils: Linux ethernet bridge. Usually two ethernet network cards on one
+bridge_utils: machine are on different network segments. Bridging makes those
+bridge_utils: two network segments appear as one. To use network bridging you
+bridge_utils: will need to have bridging support compiled into the kernel.
+bridge_utils:
+bridge_utils:
+bridge_utils:
+bridge_utils:
+EOF
+
+cat > $PKG/install/slack-required <<EOF
+sysfsutils >= 2.1.0-i486-1
+EOF
+
+install -m644 -g0 -o0 AUTHORS ChangeLog README THANKS TODO doc/FAQ \
+ doc/FIREWALL doc/HOWTO doc/PROJECTS doc/SMPNOTES doc/WISHLIST \
+ $PKG/usr/doc/$NAME-$VERSION
+
+chmod 444 $PKG/usr/man/man?/*.?
+gzip -9nf $PKG/usr/man/man?/*.?
+
+strip $PKG/usr/sbin/* || :
+
+chown -R root.root $PKG
+
+# Make package
+cd $PKG
+cat install/slack-desc | grep "$NAME:" > /tmp/$NAME-$VERSION-$ARCH-$BUILD.txt
+makepkg -l y -c n /tmp/$NAME-$VERSION-$ARCH-$BUILD.tgz
diff --git a/network/centerim/centerim.SlackBuild b/network/centerim/centerim.SlackBuild
new file mode 100755
index 0000000..79c7f7e
--- /dev/null
+++ b/network/centerim/centerim.SlackBuild
@@ -0,0 +1,106 @@
+#!/bin/sh
+
+CWD=`pwd`
+NAME=centerim
+VERSION=4.22.9
+ARCH=i586
+BUILD=1
+PKGNAME=$NAME
+PKGVER=$VERSION
+BASEDIR=$PKGNAME-$PKGVER
+ARCHIVE=$BASEDIR.tar.gz
+REPOSITORY=http://centerim.org/download/releases
+FLAGS="-O2 -march=pentium -mtune=pentium -fno-strength-reduce \
+ -fomit-frame-pointer -ffast-math"
+PKG=/tmp/package-$NAME
+
+rm -rf $PKG
+mkdir -p $PKG
+
+# Obtain sources
+if [ ! -e $ARCHIVE ]; then
+  if `wget "$REPOSITORY/$ARCHIVE"`; then
+    true
+  else
+    exit 1
+  fi
+fi
+
+# Compile
+cd /tmp
+tar zxvf $CWD/$ARCHIVE
+cd $BASEDIR
+CFLAGS=$FLAGS CXXFLAGS=$FLAGS ./configure \
+ --build=${ARCH}-slackware-linux \
+ --prefix=/usr \
+ --mandir=/usr/man \
+ --sysconfdir=/etc \
+ --localstatedir=/var \
+ --with-ssl \
+ --with-openssl=/usr
+make
+
+# Install
+make install DESTDIR=$PKG
+mkdir -p $PKG/install $PKG/usr/doc/$NAME-$VERSION
+cat > $PKG/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in. You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+        |-----handy-ruler------------------------------------------------------|
+centerim: centerim
+centerim:
+centerim: Centerim is a console (menu and window driven) instant messaging
+centerim: interface. Currently ICQ2000, Yahoo!, AIM TOC, IRC, Jabber, RSS and
+centerim: LiveJournal protocols are supported. It allows you to send, receive
+centerim: and forward messages, URLs, SMSes, mass messages, search for users
+centerim: (including extended "whitepages" searches), view user details,
+centerim: maintain contact lists, register new UINs and much more!
+centerim:
+centerim: Homepage: http://centerim.org
+centerim:
+EOF
+
+cat > $PKG/install/slack-required <<EOF
+libjpeg >= 8a-i386-4
+curl >= 7.20.1-i486-1
+openssl-solibs >= 0.9.8n-i486-1
+EOF
+
+install -m 0644 -g 0 -o 0 AUTHORS ChangeLog FAQ README \
+ THANKS TODO contrib/colorscheme.* $PKG/usr/doc/$NAME-$VERSION
+
+xz -9f \
+ $PKG/usr/doc/$NAME-$VERSION/ChangeLog \
+ $PKG/usr/doc/$NAME-$VERSION/README
+
+install -m 0644 -g 0 -o 0 misc/cimconv \
+ $PKG/usr/doc/$NAME-$VERSION/cimconv.pl
+install -m 0644 -g 0 -o 0 misc/CenterIMLog2HTML.py \
+ $PKG/usr/doc/$NAME-$VERSION
+install -m 0644 -g 0 -o 0 misc/cimconv.1 \
+ $PKG/usr/doc/$NAME-$VERSION
+xz -9f $PKG/usr/doc/$NAME-$VERSION/*.1 
+
+# Oops, this is really not needed
+rm -f \
+ $PKG/usr/bin/cimconv \
+ $PKG/usr/bin/CenterIMLog2HTML.py \
+ $PKG/usr/man/man1/*.1
+
+install -m 0444 -g 0 -o 0 centerim.1 \
+ $PKG/usr/man/man1
+xz -9f $PKG/usr/man/man?/*.?
+
+strip $PKG/usr/bin/* || :
+
+chown -R root.root $PKG
+
+# Make package
+cd $PKG
+cat install/slack-desc | grep "$NAME:" > /tmp/$NAME-$VERSION-$ARCH-$BUILD.txt
+makepkg -l y -c n /tmp/$NAME-$VERSION-$ARCH-$BUILD.txz
diff --git a/network/ebtables/ebtables-2.0.6-makefile.patch.bz2 b/network/ebtables/ebtables-2.0.6-makefile.patch.bz2
new file mode 100644
index 0000000..bbcbf94
Binary files /dev/null and b/network/ebtables/ebtables-2.0.6-makefile.patch.bz2 differ
diff --git a/network/ebtables/ebtables.SlackBuild b/network/ebtables/ebtables.SlackBuild
new file mode 100755
index 0000000..351dae9
--- /dev/null
+++ b/network/ebtables/ebtables.SlackBuild
@@ -0,0 +1,75 @@
+#!/bin/sh
+
+CWD=`pwd`
+NAME=ebtables
+VERSION=2.0.6
+ARCH=i586
+BUILD=1
+PKGNAME=$NAME
+PKGVER=v$VERSION
+BASEDIR=$PKGNAME-$PKGVER
+ARCHIVE=$BASEDIR.tar.gz
+REPOSITORY=http://some/where
+FLAGS="-O2 -march=pentium -mcpu=pentium -fno-strength-reduce \
+ -fomit-frame-pointer -ffast-math"
+PKG=/tmp/package-$NAME
+
+rm -rf $PKG
+mkdir -p $PKG
+
+# Obtain sources
+if [ ! -e $ARCHIVE ]; then
+  if `wget "$REPOSITORY/$ARCHIVE"`; then
+    true
+  else
+    exit 1
+  fi
+fi
+
+# Compile
+cd /tmp
+tar zxvf $CWD/$ARCHIVE
+cd $BASEDIR
+bzcat $CWD/$NAME-$VERSION-makefile.patch.bz2 | patch -p1 -s
+make COPTIM="$FLAGS"
+
+# Install
+make install DESTDIR=$PKG
+mkdir -p $PKG/install $PKG/usr/doc/$NAME-$VERSION
+cat > $PKG/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in. You must make
+# exactly 11 lines for the formatting to be correct. It's also customary to
+# leave one space after the ':'.
+
+        |-----handy-ruler------------------------------------------------------|
+ebtables: ebtables (ethernet bridging tables)
+ebtables:
+ebtables: Install this package if you want to enable a firewall on your
+ebtables: Linux ethernet bridging router. Ebtables is similar to Ipchains.
+ebtables: You will also probably need to make sure your kernel is compiled
+ebtables: with ebtables support.
+ebtables:
+ebtables:
+ebtables:
+ebtables:
+ebtables:
+EOF
+
+install -m644 -g0 -o0 ChangeLog THANKS \
+ $PKG/usr/doc/$NAME-$VERSION
+
+chmod 444 $PKG/usr/man/man?/*.?
+gzip -9nf $PKG/usr/man/man?/*.?
+
+strip $PKG/sbin/* || :
+
+chown -R root.root $PKG
+chgrp bin $PKG/sbin/* $PKG/sbin
+
+# Make package
+cd $PKG
+cat install/slack-desc | grep "$NAME:" > /tmp/$NAME-$VERSION-$ARCH-$BUILD.txt
+makepkg -l y -c n /tmp/$NAME-$VERSION-$ARCH-$BUILD.tgz
diff --git a/network/ezipupdate/ezipupdate.SlackBuild b/network/ezipupdate/ezipupdate.SlackBuild
new file mode 100755
index 0000000..3ca4a5a
--- /dev/null
+++ b/network/ezipupdate/ezipupdate.SlackBuild
@@ -0,0 +1,74 @@
+#!/bin/sh
+
+CWD=`pwd`
+NAME=ezipupdate
+VERSION=3.0.11b8
+ARCH=i586
+BUILD=1
+PKGNAME=ez-ipupdate
+PKGVER=$VERSION
+BASEDIR=$PKGNAME-$PKGVER
+ARCHIVE=$BASEDIR.tar.gz
+REPOSITORY=http://
+FLAGS="-O2 -march=pentium -mcpu=pentium -fno-strength-reduce \
+ -fomit-frame-pointer -ffast-math"
+PKG=/tmp/package-$NAME
+
+rm -rf $PKG
+mkdir -p $PKG
+
+# Obtain sources
+if [ ! -e $ARCHIVE ]; then
+  if `wget "$REPOSITORY/$ARCHIVE"`; then
+    true
+  else
+    exit 1
+  fi
+fi
+
+# Compile
+cd /tmp
+tar zxvf $CWD/$ARCHIVE
+cd $BASEDIR
+CFLAGS=$FLAGS CXXFLAGS=$FLAGS ./configure --prefix=/usr
+make
+
+# Install
+make install DESTDIR=$PKG
+mkdir -p $PKG/install $PKG/usr/doc/$NAME-$VERSION
+cat > $PKG/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in. You must make
+# exactly 11 lines for the formatting to be correct. It's also customary to
+# leave one space after the ':'.
+
+          |-----handy-ruler------------------------------------------------------|
+ezipupdate: EZ IP Update
+ezipupdate:
+ezipupdate: EZ IP Update is a client for dynamic IP services. It supports a
+ezipupdate: large number of those and has many options. You might want to use
+ezipupdate: this with your dial-up or DSL connection so your machine is
+ezipupdate: reachable on the Internet with a permanent host name.
+ezipupdate:
+ezipupdate:
+ezipupdate:
+ezipupdate:
+ezipupdate:
+EOF
+
+install -m644 -g0 -o0 CHANGELOG README example*.conf \
+ $PKG/usr/doc/$NAME-$VERSION
+
+mv $PKG/usr/bin $PKG/usr/sbin
+
+strip $PKG/usr/sbin/* || :
+
+chown -R root.root $PKG
+chgrp bin $PKG/usr/sbin $PKG/usr/sbin/*
+
+# Make package
+cd $PKG
+cat install/slack-desc | grep "$NAME:" > /tmp/$NAME-$VERSION-$ARCH-$BUILD.txt
+makepkg -l y -c n /tmp/$NAME-$VERSION-$ARCH-$BUILD.tgz
diff --git a/network/grsync/grsync.build b/network/grsync/grsync.build
new file mode 100755
index 0000000..7982cdd
--- /dev/null
+++ b/network/grsync/grsync.build
@@ -0,0 +1,59 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=grsync
+VERSION=1.2.4
+BUILD=1
+DEPENDS=('gtk+ >= 2.24.17-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: grsync
+${NAME}:
+${NAME}: Graphical frontend for rsync.
+${NAME}:
+${NAME}: Homepage: http://www.opbyte.it/grsync
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=${URL[sf]}/${SRCNAME[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --enable-unity=no
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog NEWS
+}
diff --git a/network/hexchat/hexchat-2.10.0-nodebug.patch.xz b/network/hexchat/hexchat-2.10.0-nodebug.patch.xz
new file mode 100644
index 0000000..559c50e
Binary files /dev/null and b/network/hexchat/hexchat-2.10.0-nodebug.patch.xz differ
diff --git a/network/hexchat/hexchat-2.10.0-nodeftrayicon.patch.xz b/network/hexchat/hexchat-2.10.0-nodeftrayicon.patch.xz
new file mode 100644
index 0000000..225916b
Binary files /dev/null and b/network/hexchat/hexchat-2.10.0-nodeftrayicon.patch.xz differ
diff --git a/network/hexchat/hexchat-2.10.0-separator.patch.xz b/network/hexchat/hexchat-2.10.0-separator.patch.xz
new file mode 100644
index 0000000..0f6d84c
Binary files /dev/null and b/network/hexchat/hexchat-2.10.0-separator.patch.xz differ
diff --git a/network/hexchat/hexchat-2.10.0-sysconf.patch.xz b/network/hexchat/hexchat-2.10.0-sysconf.patch.xz
new file mode 100644
index 0000000..c93ca6e
Binary files /dev/null and b/network/hexchat/hexchat-2.10.0-sysconf.patch.xz differ
diff --git a/network/hexchat/hexchat.build b/network/hexchat/hexchat.build
new file mode 100755
index 0000000..de490b7
--- /dev/null
+++ b/network/hexchat/hexchat.build
@@ -0,0 +1,68 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=hexchat
+VERSION=2.10.0
+BUILD=1
+DEPENDS=('gtk+ >= 2.24.17-1' 'openssl >= 1.0.1g-1' 'libntlm >= 1.3-1' 'libproxy >= 0.4.11-1' 'dbus_glib >= 0.100.2-1' 'libcanberra >= 0.30-1' 'libnotify >= 0.7.5-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: hexchat
+${NAME}:
+${NAME}: An IRC client based on XChat.
+${NAME}:
+${NAME}: Homepage: http://hexchat.org
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://dl.hexchat.org/hexchat/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+chmod 0755 configure
+sed -i 's|${libdir}/hexchat/plugins|${libdir}/plugins/hexchat|g' configure
+CPPFLAGS="-I${SYS_DIR[include]}/ntlm -I${SYS_DIR[include]}/canberra" \
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --disable-rpath \
+ --enable-static=no \
+ --enable-shared=yes \
+ --enable-threads=posix \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --includedir="${SYS_DIR[include]}/hexchat" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-pkgconfigdir="${SYS_DIR[share]}/pkgconfig" \
+ --enable-shm \
+ --enable-ntlm
+make ${JOBS}
+make install DESTDIR="${PKG}"
+}
diff --git a/network/httping/httping-2.2.1-cmake.patch.xz b/network/httping/httping-2.2.1-cmake.patch.xz
new file mode 100644
index 0000000..cb2bc32
Binary files /dev/null and b/network/httping/httping-2.2.1-cmake.patch.xz differ
diff --git a/network/httping/httping.build b/network/httping/httping.build
new file mode 100755
index 0000000..158f4e3
--- /dev/null
+++ b/network/httping/httping.build
@@ -0,0 +1,53 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=httping
+VERSION=2.2.1
+BUILD=1
+DEPENDS=('openssl >= 1.0.1e-1' 'fftw >= 3.3.3-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: httping (ping utility for the HTTP protocol)
+${NAME}:
+${NAME}: Httping is like 'ping' but for HTTP-requests. Give it an URL, and
+${NAME}: it'll show you how long it takes to connect, send a request and
+${NAME}: retrieve the reply.
+${NAME}:
+${NAME}: Httping was written bu Folkert Van Heusden.
+${NAME}:
+${NAME}: Homepage: http://www.vanheusden.com/httping
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://www.vanheusden.com/${SRCNAME[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tgz
+
+build0()
+{
+cmake \
+ -DCMAKE_C_FLAGS:STRING="${FLAGS}" \
+ -DCMAKE_CXX_FLAGS:STRING="${FLAGS}" \
+ -DCMAKE_VERBOSE_MAKEFILE:BOOL="on" \
+ -DCMAKE_INSTALL_PREFIX:PATH="${SYS_DIR[usr]}" \
+CMakeLists.txt
+license license.txt
+make ${JOBS}
+make install DESTDIR="${PKG}"
+}
diff --git a/network/iftop/iftop-1.0pre2-desktop.patch.xz b/network/iftop/iftop-1.0pre2-desktop.patch.xz
new file mode 100644
index 0000000..561ca0e
Binary files /dev/null and b/network/iftop/iftop-1.0pre2-desktop.patch.xz differ
diff --git a/network/iftop/iftop.build b/network/iftop/iftop.build
new file mode 100755
index 0000000..6d8a286
--- /dev/null
+++ b/network/iftop/iftop.build
@@ -0,0 +1,62 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=iftop
+VERSION=1.0pre2
+BUILD=2
+DEPENDS=('tcpip >= 20130127-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: iftop
+${NAME}:
+${NAME}: Iftop does for network usage what top(1) does for CPU usage. It
+${NAME}: listens to network traffic on a network interface and displays a
+${NAME}: table of current bandwidth usage by pairs of hosts. Handy for
+${NAME}: answering the question: "why is my ADSL link so slow?". But it will
+${NAME}: likely be useful in other situations.
+${NAME}:
+${NAME}: Homepage: http://www.ex-parrot.com/pdw/iftop
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://www.ex-parrot.com/~pdw/iftop/download/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[conf]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-resolver=netdb
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog ChangeLog
+#FIXME: iftop doesn't start as a normal user, capabilities?
+#install.dir ${PKG}/usr/share/applications
+#install.dat iftop.desktop ${PKG}/usr/share/applications
+}
diff --git a/network/iptraf_ng/iptraf-ng-1.1.3.1-notokenring.patch.xz b/network/iptraf_ng/iptraf-ng-1.1.3.1-notokenring.patch.xz
new file mode 100644
index 0000000..dfb1773
Binary files /dev/null and b/network/iptraf_ng/iptraf-ng-1.1.3.1-notokenring.patch.xz differ
diff --git a/network/iptraf_ng/iptraf-ng-1.1.3.1-rundir.patch.xz b/network/iptraf_ng/iptraf-ng-1.1.3.1-rundir.patch.xz
new file mode 100644
index 0000000..b7300e7
Binary files /dev/null and b/network/iptraf_ng/iptraf-ng-1.1.3.1-rundir.patch.xz differ
diff --git a/network/iptraf_ng/iptraf_ng.build b/network/iptraf_ng/iptraf_ng.build
new file mode 100755
index 0000000..0c35797
--- /dev/null
+++ b/network/iptraf_ng/iptraf_ng.build
@@ -0,0 +1,64 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=iptraf_ng
+VERSION=1.1.3.1
+BUILD=2
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: iptraf_ng (console-based network monitoring program)
+${NAME}:
+${NAME}: IPTraf is a console-based network monitoring program for Linux that 
+${NAME}: displays information about IP traffic such as:
+${NAME}:
+${NAME}:   Current TCP connections, types of IP packets, packet and byte
+${NAME}:   counts, TCP/UDP counts by ports, packet counts by packet sizes,
+${NAME}:   packet and byte counts by IP address, interface activity, flag
+${NAME}:   statuses on TCP packets, and other LAN station statistics.
+${NAME}:
+${NAME}: iptraf-ng was written by Gerard Paul Java.
+EOF
+
+# Sources
+
+SRCNAME[0]=iptraf-ng
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://fedorahosted.org/releases/i/p/iptraf-ng/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+CFLAGS="${FLAGS} -std=gnu99" CXXFLAGS="${FLAGS} -std=gnu99" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --infodir="${SYS_DIR[info]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --sbindir="${SYS_DIR[sbin]}"
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+doc AUTHORS FAQ
+changelog CHANGES
+install.dir ${PKG}${SYS_DIR[html]}/${SRCNAME[0]}/stylesheet-images
+install.doc Documentation/*.{html,png} ${PKG}${SYS_DIR[html]}/${SRCNAME[0]}
+install.doc Documentation/stylesheet-images/*.gif ${PKG}${SYS_DIR[html]}/${SRCNAME[0]}/stylesheet-images
+install.dir ${PKG}${SYS_DIR[var]}/{lib,log}/iptraf-ng
+install.dir ${PKG}${SYS_DIR[etc]}/logrotate.d
+install.bin iptraf-ng-logrotate.conf ${PKG}${SYS_DIR[etc]}/logrotate.d/iptraf-ng
+}
diff --git a/network/iptstate/iptstate.build b/network/iptstate/iptstate.build
new file mode 100755
index 0000000..7a45797
--- /dev/null
+++ b/network/iptstate/iptstate.build
@@ -0,0 +1,47 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=iptstate
+VERSION=2.2.5
+BUILD=1
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: iptstate
+${NAME}:
+${NAME}: Displays the states held by an IP Tables firewall in a "top"-like
+${NAME}: manner.
+${NAME}:
+${NAME}: Homepage: http://www.phildev.net/iptstate
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=${URL[sf]}/iptstate/iptstate/${SRCVERS[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.bz2
+
+build0()
+{
+make ${JOBS} CXXFLAGS+="${FLAGS}"
+make install PREFIX="${PKG}/usr"
+changelog Changelog
+license LICENSE
+}
diff --git a/network/kismet/kismet-20130211-alertsyslogmfile.patch.xz b/network/kismet/kismet-20130211-alertsyslogmfile.patch.xz
new file mode 100644
index 0000000..3062765
Binary files /dev/null and b/network/kismet/kismet-20130211-alertsyslogmfile.patch.xz differ
diff --git a/network/kismet/kismet-20130211-desktop.patch.xz b/network/kismet/kismet-20130211-desktop.patch.xz
new file mode 100644
index 0000000..ac2fa39
Binary files /dev/null and b/network/kismet/kismet-20130211-desktop.patch.xz differ
diff --git a/network/kismet/kismet.build b/network/kismet/kismet.build
new file mode 100755
index 0000000..65c2435
--- /dev/null
+++ b/network/kismet/kismet.build
@@ -0,0 +1,100 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=kismet
+VERSION=20130211
+BUILD=2
+DEPENDS=('tcpip >= 20130209-1' 'pcre >= 8.32-1' 'openssl >= 1.0.1c-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: kismet (wireless network scanner)
+${NAME}:
+${NAME}: Kismet is an 802.11 layer2 wireless network detector, sniffer, and
+${NAME}: intrusion detection system. Kismet will work with any wireless card
+${NAME}: which supports raw monitoring (rfmon) mode, and can sniff 802.11b,
+${NAME}: 802.11a, and 802.11g traffic.
+${NAME}:
+${NAME}: Kismet identifies networks by passively collecting packets and
+${NAME}: detecting standard named networks, detecting (and given time,
+${NAME}: decloaking) hidden networks, and infering the presence of
+${NAME}: nonbeaconing networks via data traffic.
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/kismet/kismet.conf.new
+config etc/kismet/kismet_drone.conf.new
+
+chown root.netdev usr/bin/kismet_capture
+chmod 4750 usr/bin/kismet_capture
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://www.kismetwireless.net/code/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+sed -i 's|@datadir@/kismet/wav|@datadir@/sounds/kismet|g' Makefile.inc.in
+LIBS="-lnl-3 -lnl-genl-3" \
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}/kismet" \
+ --libdir="${SYS_DIR[lib]}/plugins" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-pcreheaders="${SYS_DIR[include]}/pcre" \
+ --with-suidgroup="netdev"
+make ${JOBS} dep
+make ${JOBS}
+make ${JOBS} plugins
+make install suidinstall DESTDIR="${PKG}"
+make plugins-install DESTDIR="${PKG}"
+doc README
+changelog RELEASENOTES.txt
+install.dir ${PKG}${SYS_DIR[share]}/icons/hicolor/48x48/apps
+install.dat kismet.png ${PKG}${SYS_DIR[share]}/icons/hicolor/48x48/apps
+install.dir ${PKG}${SYS_DIR[share]}/applications
+install.dat kismet.desktop ${PKG}${SYS_DIR[share]}/applications
+install.dir ${PKG}${SYS_DIR[share]}/dtds
+install.dat extra/*.{dtd,xsd} ${PKG}${SYS_DIR[share]}/dtds
+mv \
+ ${PKG}${SYS_DIR[etc]}/kismet/kismet.conf \
+ ${PKG}${SYS_DIR[etc]}/kismet/kismet.conf.new
+mv \
+ ${PKG}${SYS_DIR[etc]}/kismet/kismet_drone.conf \
+ ${PKG}${SYS_DIR[etc]}/kismet/kismet_drone.conf.new
+chmod 0755 ${PKG}${SYS_DIR[lib]}/plugins/kismet*/*.so
+}
diff --git a/network/lftp/lftp-4.5.2-color.patch.xz b/network/lftp/lftp-4.5.2-color.patch.xz
new file mode 100644
index 0000000..c20c69b
Binary files /dev/null and b/network/lftp/lftp-4.5.2-color.patch.xz differ
diff --git a/network/lftp/lftp.build b/network/lftp/lftp.build
new file mode 100755
index 0000000..816a4ea
--- /dev/null
+++ b/network/lftp/lftp.build
@@ -0,0 +1,87 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=lftp
+VERSION=4.5.2
+BUILD=1
+DEPENDS=('gnutls >= 3.1.12-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: lftp (command line file transfer program)
+${NAME}:
+${NAME}: A program that allows sophisticated FTP and HTTP connections to other
+${NAME}: hosts. Lftp can handle many file access methods including FTP, FTPS,
+${NAME}: HTTP, HTTPS, HFTP, FISH and file. Every operation in Lftp is
+${NAME}: reliable, that is any non-fatal error is ignored and the operation
+${NAME}: is retried. Lftp has a shell-like command syntax and has a built-in
+${NAME}: mirror feature which can download or upload a whole directory tree.
+${NAME}:
+${NAME}: Homepage: http://lftp.yar.ru
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/conf.d/lftp.conf.new
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://ftp.yars.free.net/pub/source/${NAME}/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+SRCCOPY[0]="GPL3"
+
+build0()
+{
+sed -i 's|pkglibdir = $(libdir)/@PACKAGE@|pkglibdir = $(libdir)/plugins/@PACKAGE@|g' */Makefile.in
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-rpath \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[conf]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir=/var \
+ --with-pager="${SYS_DIR[bin]}/less" \
+ --with-gnutls \
+ --with-modules \
+ --enable-packager-mode
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS FAQ THANKS
+changelog NEWS
+config ${PKG}${SYS_DIR[conf]}/lftp.conf
+rm -rf ${PKG}${SYS_DIR[share]}/${SRCNAME[0]}
+}
diff --git a/network/msmtp/msmtp.SlackBuild b/network/msmtp/msmtp.SlackBuild
new file mode 100755
index 0000000..2ab83f4
--- /dev/null
+++ b/network/msmtp/msmtp.SlackBuild
@@ -0,0 +1,97 @@
+#!/bin/sh
+
+CWD=`pwd`
+NAME=msmtp
+VERSION=1.4.13
+ARCH=i586
+BUILD=1
+PKGNAME=$NAME
+PKGVER=$VERSION
+BASEDIR=$PKGNAME-$PKGVER
+ARCHIVE=$BASEDIR.tar.bz2
+REPOSITORY=http://belnet.dl.sourceforge.net/sourceforge/msmtp
+FLAGS="-O2 -march=pentium -mtune=pentium -fno-strength-reduce \
+ -fomit-frame-pointer -ffast-math"
+PKG=/tmp/package-$NAME
+
+rm -rf $PKG
+mkdir -p $PKG
+
+# Obtain sources
+if [ ! -e $ARCHIVE ]; then
+  if `wget "$REPOSITORY/$ARCHIVE"`; then
+    true
+  else
+    exit 1
+  fi
+fi
+
+# Compile
+cd /tmp
+tar jxvf $CWD/$ARCHIVE
+cd $NAME-$VERSION
+CFLAGS=$FLAGS CXXFLAGS=$FLAGS ./configure \
+ --prefix=/usr \
+ --mandir=/usr/man \
+ --infodir=/usr/info \
+ --sysconfdir=/etc \
+ --with-ssl=openssl
+make
+
+# Install
+make install DESTDIR=$PKG
+mkdir -p $PKG/install $PKG/usr/doc/$NAME-$VERSION $PKG/etc
+cat > $PKG/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+     |-----handy-ruler------------------------------------------------------|
+msmtp: msmtp
+msmtp:
+msmtp: Msmtp is an SMTP client.
+msmtp:
+msmtp:
+msmtp:
+msmtp:
+msmtp:
+msmtp:
+msmtp:
+msmtp:
+EOF
+
+cat > $PKG/install/slack-required <<EOF
+openssl-solibs >= 0.9.8e-i486-1
+libidn >= 0.6.9-i486-1
+libgsasl >= 0.2.19-i486-1
+EOF
+
+install -m644 -g0 -o0 AUTHORS ChangeLog NEWS README THANKS doc/Mutt+msmtp.txt \
+ doc/msmtp.html doc/msmtp.pdf doc/msmtprc-user.example \
+ $PKG/usr/doc/$NAME-$VERSION
+
+gzip -9nf \
+ $PKG/usr/doc/$NAME-$VERSION/ChangeLog \
+ $PKG/usr/doc/$NAME-$VERSION/NEWS \
+ $PKG/usr/doc/$NAME-$VERSION/msmtp.html \
+ $PKG/usr/doc/$NAME-$VERSION/msmtp.pdf
+
+install -m600 -g0 -o0 doc/msmtprc-system.example $PKG/etc/msmtprc.sample
+
+chmod 444 $PKG/usr/man/man?/*.?
+gzip -9nf $PKG/usr/man/man?/*.?
+
+rm -f $PKG/usr/info/dir
+gzip -9nf $PKG/usr/info/*.info*
+
+strip $PKG/usr/bin/* || :
+
+chown -R root.root $PKG
+
+# Make package
+cd $PKG
+cat install/slack-desc | grep "$NAME:" > /tmp/$NAME-$VERSION-$ARCH-$BUILD.txt
+makepkg -l y -c n /tmp/$NAME-$VERSION-$ARCH-$BUILD.tgz
diff --git a/network/mtr/mtr-0.84-desktop.patch.xz b/network/mtr/mtr-0.84-desktop.patch.xz
new file mode 100644
index 0000000..7a90057
Binary files /dev/null and b/network/mtr/mtr-0.84-desktop.patch.xz differ
diff --git a/network/mtr/mtr-0.84-notermcap.patch.xz b/network/mtr/mtr-0.84-notermcap.patch.xz
new file mode 100644
index 0000000..0a5a7e0
Binary files /dev/null and b/network/mtr/mtr-0.84-notermcap.patch.xz differ
diff --git a/network/mtr/mtr.build b/network/mtr/mtr.build
new file mode 100755
index 0000000..f90a2eb
--- /dev/null
+++ b/network/mtr/mtr.build
@@ -0,0 +1,63 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=mtr
+VERSION=0.84
+BUILD=1
+DEPENDS=('gtk+ >= 2.24.14-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: mtr
+${NAME}:
+${NAME}: Mtr combines the functionality of the 'traceroute' and 'ping'
+${NAME}: programs in a single X Windows-based network diagnostic tool. As mtr
+${NAME}: starts, it investigates the network connection between the host mtr
+${NAME}: runs on and a user-specified destination host. After it determines
+${NAME}: the address of each network hop between machines, it sends a
+${NAME}: sequence ICMP ECHO requests to each one to determine the quality of
+${NAME}: the link to each machine.
+${NAME}:
+${NAME}: Homepage: http://www.bitwizard.nl/mtr
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=ftp://ftp.bitwizard.nl/${SRCNAME[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+LDFLAGS="-Wl,--as-needed" \
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --sbindir="${SYS_DIR[bin]}"
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog NEWS
+install.dir ${PKG}${SYS_DIR[share]}/{applications,icons/hicolor/48x48/apps}
+install.dat mtr.desktop ${PKG}${SYS_DIR[share]}/applications
+install.dat mtr.png ${PKG}${SYS_DIR[share]}/icons/hicolor/48x48/apps
+}
diff --git a/network/mutt-kz/mutt-kz-20130515-config.patch.xz b/network/mutt-kz/mutt-kz-20130515-config.patch.xz
new file mode 100644
index 0000000..27ff0b0
Binary files /dev/null and b/network/mutt-kz/mutt-kz-20130515-config.patch.xz differ
diff --git a/network/mutt-kz/mutt-kz.build b/network/mutt-kz/mutt-kz.build
new file mode 100755
index 0000000..f1bf051
--- /dev/null
+++ b/network/mutt-kz/mutt-kz.build
@@ -0,0 +1,114 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=mutt-kz
+VERSION=20130515
+BUILD=2
+DEPENDS=('openssl >= 1.0.1e-1' 'cyrus_sasl >= 2.1.26-1' 'gpgme >= 1.3.2-1' 'gdbm >= 1.10-1' 'libnotmuch >= 0.15-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: mutt-kz (mail user agent)
+${NAME}:
+${NAME}: Mutt is a small but very powerful text-based MIME mail client. Mutt
+${NAME}: is highly configurable, and is well suited to the mail power user
+${NAME}: with advanced features like key bindings, keyboard macros, mail
+${NAME}: threading, regular expression searches and a powerful pattern
+${NAME}: matching language for selecting groups of messages. Mutt-kz is a
+${NAME}: fork of Mutt that adds notmuch support, sidebar and other
+${NAME}: improvements.
+${NAME}:
+${NAME}: Homepage: https://github.com/karelzak/mutt-kz
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/mutt/mutt.conf.new
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=ftp://ftp.mutt.org/mutt/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+CPPFLAGS="-I${SYS_DIR[include]}/idn" \
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}/mutt" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-mailpath="${SYS_DIR[var]}/spool/mail" \
+ --with-docdir="${SYS_DIR[doc]}/${NAME}-${VERSION}" \
+ --without-wc-funcs \
+ --with-ssl \
+ --enable-locales-fix \
+ --enable-gpgme \
+ --enable-notmuch \
+ --enable-pop \
+ --enable-imap \
+ --enable-smtp \
+ --enable-hcache \
+ --with-curses="${SYS_DIR[usr]}" \
+ --with-ssl="${SYS_DIR[usr]}" \
+ --with-sasl="${SYS_DIR[usr]}" \
+ --with-idn
+# --with-gnutls="${SYS_DIR[usr]}"
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+changelog NEWS
+mv \
+ ${PKG}${SYS_DIR[etc]}/mutt/Muttrc \
+ ${PKG}${SYS_DIR[etc]}/mutt/mutt.conf.new
+mv \
+ ${PKG}${SYS_DIR[etc]}/mutt/Muttrc.dist \
+ ${PKG}${SYS_DIR[etc]}/mutt/mutt.conf.dist
+mv \
+ ${DOC}/samples/{colors.*,*.rc,sample.*} \
+ ${PKG}${SYS_DIR[etc]}/mutt
+install.dir ${PKG}${SYS_DIR[html]}/mutt
+mv \
+ ${DOC}/*.html \
+ ${PKG}${SYS_DIR[html]}/mutt
+rm -rf \
+ ${PKG}${SYS_DIR[etc]}/mutt/mime.types* \
+ ${PKG}${SYS_DIR[bin]}/{flea,muttbug} \
+ ${PKG}${SYS_DIR[man]}/man?/{flea,muttbug}.? \
+ ${DOC}/samples \
+ ${DOC}/{COPYRIGHT,GPL,INSTALL,README*,TODO,NEWS,UPDATING} \
+ ${DOC}/{applying-patches,*-*otes,manual}.txt
+}
diff --git a/network/ncdc/ncdc.build b/network/ncdc/ncdc.build
new file mode 100755
index 0000000..16baf15
--- /dev/null
+++ b/network/ncdc/ncdc.build
@@ -0,0 +1,58 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=ncdc
+VERSION=1.19.1
+BUILD=1
+DEPENDS=('glib >= 2.38.2-1' 'bzip2 >= 1.0.6-1' 'sqlite >= 3.7.16.1-1' 'gnutls >= 3.2.12-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: ncdc
+${NAME}:
+${NAME}: A console Direct Connect client.
+${NAME}:
+${NAME}: Homepage: http://dev.yorhel.nl/ncdc
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://dev.yorhel.nl/download/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="BSD"
+
+build0()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}"
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+changelog ChangeLog
+}
diff --git a/network/ncrack/ncrack.SlackBuild b/network/ncrack/ncrack.SlackBuild
new file mode 100755
index 0000000..95e35d7
--- /dev/null
+++ b/network/ncrack/ncrack.SlackBuild
@@ -0,0 +1,102 @@
+#!/bin/sh
+
+CWD=`pwd`
+NAME=ncrack
+VERSION=0.2alpha
+ARCH=i586
+BUILD=1
+PKGNAME=$NAME
+PKGVER=0.2ALPHA
+BASEDIR=$PKGNAME-$PKGVER
+ARCHIVE=$BASEDIR.tar.gz
+REPOSITORY=http://download.insecure.org/nmap/dist
+FLAGS="-O2 -march=pentium -mtune=pentium -fno-strength-reduce \
+ -fomit-frame-pointer -ffast-math"
+PKG=/tmp/package-$NAME
+
+rm -rf $PKG
+mkdir -p $PKG
+
+# Obtain sources
+if [ ! -e $ARCHIVE ]; then
+  if `wget "$REPOSITORY/$ARCHIVE"`; then
+    true
+  else
+    exit 1
+  fi
+fi
+
+# Compile
+cd /tmp
+tar zxvf $CWD/$ARCHIVE
+cd $BASEDIR
+CFLAGS=${FLAGS} CXXFLAGS=${FLAGS} ./configure \
+ --build=${ARCH}-slackware-linux \
+ --prefix=/usr \
+ --mandir=/usr/man \
+ --sysconfdir=/etc \
+ --localstatedir=/var \
+ --with-libnbase=/usr \
+ --with-libnsock=/usr \
+ --with-libopenssh=/usr
+make
+
+# Install
+make install DESTDIR=$PKG
+mkdir -p $PKG/install $PKG/usr/doc/$NAME-$VERSION
+cat > $PKG/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in. You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+      |-----handy-ruler------------------------------------------------------|
+ncrack: ncrack (high speed network authentication cracking tool)
+ncrack:
+ncrack: Ncrack was designed using a modular approach, a command-line syntax
+ncrack: similar to Nmap and a dynamic engine that can adapt its behaviour
+ncrack: based on network feedback. It allows for rapid, yet reliable
+ncrack: large-scale auditing of multiple hosts. Ncrack's features include a
+ncrack: very flexible interface granting the user full control of network
+ncrack: operations, allowing for very sophisticated bruteforcing attacks,
+ncrack: timing templates for ease of use, runtime interaction similar to
+ncrack: Nmap's and many more.
+ncrack:
+EOF
+
+cat > $PKG/install/slack-required <<EOF
+nmap >= 5.35DC1-i486-1
+openssl-solibs >= 0.9.8n-i486-1
+EOF
+
+install -m 0644 -g 0 -o 0 CHANGELOG \
+ $PKG/usr/doc/$NAME-$VERSION
+
+xz -9f \
+ $PKG/usr/doc/$NAME-$VERSION/CHANGELOG
+
+chmod 0444 \
+ $PKG/usr/man/*/man?/*.? \
+ $PKG/usr/man/man?/*.?
+
+xz -9f \
+ $PKG/usr/man/*/man?/*.? \
+ $PKG/usr/man/man?/*.?
+
+rm -f \
+ $PKG/usr/libexec/*/*/*.la
+
+strip --strip-unneeded \
+ $PKG/usr/libexec/*/*/*.so || :
+
+strip \
+ $PKG/usr/bin/* || :
+
+chown -R root.root $PKG
+
+# Make package
+cd $PKG
+cat install/slack-desc | grep "$NAME:" > /tmp/$NAME-$VERSION-$ARCH-$BUILD.txt
+makepkg -l y -c n /tmp/$NAME-$VERSION-$ARCH-$BUILD.txz
diff --git a/network/nessus/nessus-core-2.3.1-error.patch.bz2 b/network/nessus/nessus-core-2.3.1-error.patch.bz2
new file mode 100644
index 0000000..a6090d6
Binary files /dev/null and b/network/nessus/nessus-core-2.3.1-error.patch.bz2 differ
diff --git a/network/nessus/nessus.build b/network/nessus/nessus.build
new file mode 100755
index 0000000..abea999
--- /dev/null
+++ b/network/nessus/nessus.build
@@ -0,0 +1,136 @@
+#!/bin/bash
+
+source /usr/src/ports/Build/build.sh
+
+PACKAGER="Witukind <witukind@nsbm.kicks-ass.org>"
+ARCH=i586
+BUILD=1
+
+# Sources
+SRCNAME[0]=nessus-libraries
+SRCVER[0]=2.3.1
+SRCREP[0]=http://no/where
+SRCPKG[0]=${SRCNAME[0]}-${SRCVER[0]}.tar.gz
+SRCROOT[0]=${SRCNAME[0]}
+
+SRCNAME[1]=libnasl
+SRCVER[1]=${SRCVER[0]}
+SRCREP[1]=http://no/where
+SRCPKG[1]=${SRCNAME[1]}-${SRCVER[1]}.tar.gz
+SRCROOT[1]=${SRCNAME[1]}
+
+SRCNAME[2]=nessus-core
+SRCVER[2]=${SRCVER[0]}
+SRCREP[2]=http://no/where
+SRCPKG[2]=${SRCNAME[2]}-${SRCVER[2]}.tar.gz
+SRCROOT[2]=${SRCNAME[2]}
+
+# Packages
+PKGNAME[0]=nessus
+PKGVER[0]=${SRCVER[0]}
+PKGARCH[0]=${ARCH}
+
+PKGNAME[1]=${PKGNAME[0]}_lib
+PKGVER[1]=${SRCVER[0]}
+PKGARCH[1]=${ARCH}
+PKGOPTS[1]="nodocdir"
+
+PKGNAME[2]=${PKGNAME[0]}_dev
+PKGVER[2]=${SRCVER[0]}
+PKGARCH[2]=${ARCH}
+PKGOPTS[2]="nodocdir"
+
+PKGNAME[3]=nessusd
+PKGVER[3]=${SRCVER[0]}
+PKGARCH[3]=${ARCH}
+PKGOPTS[3]="nodocdir"
+
+PKGNAME[4]=nasl
+PKGVER[4]=${SRCVER[0]}
+PKGARCH[4]=${ARCH}
+PKGOPTS[4]="nodocdir"
+
+begin
+
+(
+  cd ${SRC[0]}
+  CFLAGS=$DISTFLAGS CXXFLAGS=$DISTFLAGS \
+  ./configure \
+  --enable-static=no \
+  --enable-shared=yes \
+  --prefix=/usr \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --localstatedir=/var \
+  --enable-cypher \
+  $ARCH-pc-linux-gnu
+  make
+  make install DESTDIR=${PKG[1]}
+
+  cd ${SRC[1]}
+  CFLAGS="$DISTFLAGS -I${PKG[1]}/usr/include" \
+  CXXFLAGS="$DISTFLAGS -I${PKG[1]}/usr/include" \
+  LDFLAGS="-L${PKG[1]}/usr/lib" \
+  NESSUSCONFIG=${PKG[1]}/usr/bin/nessus-config \
+  ./configure \
+  --enable-static=no \
+  --enable-shared=yes \
+  --prefix=/usr \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --localstatedir=/var \
+  $ARCH-pc-linux-gnu
+  make
+  make install DESTDIR=${PKG[1]}
+
+  cd ${SRC[2]}
+  CFLAGS="$DISTFLAGS -I${PKG[1]}/usr/include" \
+  CXXFLAGS="$DISTFLAGS -I${PKG[1]}/usr/include" \
+  LDFLAGS="-L${PKG[1]}/usr/lib" \
+  NESSUSCONFIG=${PKG[1]}/usr/bin/nessus-config \
+  ./configure \
+  --prefix=/usr \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --localstatedir=/var \
+  --libdir=/usr/libexec \
+  $ARCH-pc-linux-gnu
+  make
+  make install DESTDIR=${PKG[1]}
+
+  mkdir -p \
+   ${PKG[0]}/usr/{bin,man/man1} \
+   ${PKG[2]}/usr/{bin,man/man1} \
+   ${PKG[4]}/usr/{bin,man/man1}
+
+  mv \
+    ${PKG[1]}/usr/bin/*-config \
+    ${PKG[2]}/usr/bin
+ 
+  mv \
+    ${PKG[1]}/usr/man/man1/*-config* \
+    ${PKG[2]}/usr/man/man1
+
+  mv \
+    ${PKG[1]}/usr/include \
+    ${PKG[2]}/usr
+
+  # Nasl
+  mv \
+    ${PKG[1]}/usr/bin/nasl \
+    ${PKG[4]}/usr/bin
+
+  mv \
+    ${PKG[1]}/usr/man/man1/nasl.1 \
+    ${PKG[4]}/usr/man/man1
+
+  mv \
+   ${PKG[1]}/var \
+   ${PKG[0]}
+
+  rm -rf \
+   ${PKG[1]}/usr/sbin
+   ${PKG[1]}/usr/man
+)
+
+end nocleanup
diff --git a/network/nethogs/nethogs-0.8.0-geteuid.patch.xz b/network/nethogs/nethogs-0.8.0-geteuid.patch.xz
new file mode 100644
index 0000000..119c7db
Binary files /dev/null and b/network/nethogs/nethogs-0.8.0-geteuid.patch.xz differ
diff --git a/network/nethogs/nethogs-0.8.0-makefile.patch.xz b/network/nethogs/nethogs-0.8.0-makefile.patch.xz
new file mode 100644
index 0000000..407a71a
Binary files /dev/null and b/network/nethogs/nethogs-0.8.0-makefile.patch.xz differ
diff --git a/network/nethogs/nethogs.build b/network/nethogs/nethogs.build
new file mode 100755
index 0000000..7b48f53
--- /dev/null
+++ b/network/nethogs/nethogs.build
@@ -0,0 +1,49 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=nethogs
+VERSION=0.8.0
+BUILD=2
+DEPENDS=('tcpip >= 20130209-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: nethogs ('net top' per process)
+${NAME}:
+${NAME}: A small 'net top' tool. Instead of breaking the traffic down per
+${NAME}: protocol or per subnet, like most tools do, it groups bandwidth by
+${NAME}: process. If there's suddenly a lot of network traffic, you can fire
+${NAME}: up NetHogs and immediately see which PID is causing this. This makes
+${NAME}: it easy to identify programs that have gone wild and are suddenly
+${NAME}: taking up your bandwidth.
+${NAME}:
+${NAME}: Homepage: http://nethogs.sf.net
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=${URL[sf]}/${SRCNAME[0]}/${SRCNAME[0]}/${SRCVERS[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCROOT[0]=${SRCNAME[0]}
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+make ${JOBS} CFLAGS="${FLAGS}" LDFLAGS="-lnl-genl-3"
+make install DESTDIR="${PKG}${SYS_DIR[usr]}"
+changelog Changelog
+}
diff --git a/network/netpipes/netpipes-4.2-export-install.patch.xz b/network/netpipes/netpipes-4.2-export-install.patch.xz
new file mode 100644
index 0000000..77adaaf
Binary files /dev/null and b/network/netpipes/netpipes-4.2-export-install.patch.xz differ
diff --git a/network/netpipes/netpipes.build b/network/netpipes/netpipes.build
new file mode 100755
index 0000000..bf11760
--- /dev/null
+++ b/network/netpipes/netpipes.build
@@ -0,0 +1,46 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=netpipes
+VERSION=4.2
+BUILD=1
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: netpipes (TCP/IP pipe utilities)
+${NAME}:
+${NAME}: Robert Forsman's netpipes package makes TCP/IP streams usable in
+${NAME}: shell scripts. It can also simplify client/server code by allowing
+${NAME}: the programmer to skip all the tedious programming bits related to
+${NAME}: sockets and concentrate on writing a filter/service. Here's an
+${NAME}: example of what you can do with 'faucet' and 'hose', two netpipes
+${NAME}: commands:
+${NAME}:
+${NAME}: server$ faucet 3000 -out tar cf - .
+${NAME}: client$ hose server 3000 -in tar xvf -
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}-export
+SRCPACK[0]=http://web.purplefrog.com/~thoth/netpipes/ftp/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+make ${JOBS} CDEBUGFLAGS="${FLAGS}"
+make install INSTROOT="${PKG}${SYS_DIR[usr]}" INSTMAN="${PKG}${SYS_DIR[man]}"
+}
diff --git a/network/netwatch/netwatch-1.3.0-install.patch.xz b/network/netwatch/netwatch-1.3.0-install.patch.xz
new file mode 100644
index 0000000..22c277f
Binary files /dev/null and b/network/netwatch/netwatch-1.3.0-install.patch.xz differ
diff --git a/network/netwatch/netwatch-1.3.0-phonemyself.patch.xz b/network/netwatch/netwatch-1.3.0-phonemyself.patch.xz
new file mode 100644
index 0000000..4f9344a
Binary files /dev/null and b/network/netwatch/netwatch-1.3.0-phonemyself.patch.xz differ
diff --git a/network/netwatch/netwatch.build b/network/netwatch/netwatch.build
new file mode 100755
index 0000000..6957a65
--- /dev/null
+++ b/network/netwatch/netwatch.build
@@ -0,0 +1,55 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=netwatch
+VERSION=1.3.0
+BUILD=2
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: netwatch (a network monitor)
+${NAME}:
+${NAME}: Netwatch allows a user (superuser) to monitor activity on the
+${NAME}: network. The monitor includes statistics on transmitted and received
+${NAME}: packets, bytes, protocol, and more.
+${NAME}:
+${NAME}: Homepage: http://www.slctech.org/~mackay/NETWATCH/netwatch.html
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://www.slctech.org/~mackay/NETWATCH/${SRCNAME[0]}-${SRCVERS[0]}-1.tgz
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}"
+make ${JOBS}
+make install DESTDIR="${PKG}"
+changelog CHANGES
+}
diff --git a/network/networkmanagerapplet/network-manager-applet-0.9.8.2-xfcesettings.patch.xz b/network/networkmanagerapplet/network-manager-applet-0.9.8.2-xfcesettings.patch.xz
new file mode 100644
index 0000000..a697ecd
Binary files /dev/null and b/network/networkmanagerapplet/network-manager-applet-0.9.8.2-xfcesettings.patch.xz differ
diff --git a/network/networkmanagerapplet/networkmanagerapplet.build b/network/networkmanagerapplet/networkmanagerapplet.build
new file mode 100755
index 0000000..3c70cd3
--- /dev/null
+++ b/network/networkmanagerapplet/networkmanagerapplet.build
@@ -0,0 +1,85 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=networkmanagerapplet
+MAJOR=0.9
+VERSION=${MAJOR}.8.2
+BUILD=1
+DEPENDS=('gtk+ >= 3.8.0-1' 'networkmanager >= 0.9.8.2-1' 'libnotify >= 0.7.5-1' 'libsecret >= 0.14-1' 'iso_codes >= 3.32.2-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: networkmanagerapplet
+${NAME}:
+${NAME}: A taskbar applet to manage network connections.
+${NAME}:
+${NAME}: Homepage: http://projects.gnome.org/NetworkManager
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+cat > ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+# Compile settings data schemas
+
+if [ -x usr/bin/glib-compile-schemas ]; then
+  usr/bin/glib-compile-schemas usr/share/glib-2.0/schemas
+fi
+
+if [ -x usr/bin/update-desktop-database ]; then
+  usr/bin/update-desktop-database -q
+fi
+
+if [ -x usr/bin/gtk-update-icon-cache ]; then
+  usr/bin/gtk-update-icon-cache -q -t -f usr/share/icons/hicolor
+fi
+EOF
+
+# Sources
+
+SRCNAME[0]=network-manager-applet
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=${URL[gnome]}/${SRCNAME[0]}/${MAJOR}/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' src/libnm-gtk/Makefile.in
+sed -i 's|$(libdir)/gnome-bluetooth/plugins|$(libdir)/plugins/gnome-bluetooth|g' src/gnome-bluetooth/Makefile.in
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --enable-more-warnings=no \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --libexecdir="${SYS_DIR[lib]}/exec" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-bluetooth \
+ --with-gtkver=3
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+changelog NEWS
+}
diff --git a/network/ngrep/ngrep-1.45-fixipv6.patch.xz b/network/ngrep/ngrep-1.45-fixipv6.patch.xz
new file mode 100644
index 0000000..6d777e8
Binary files /dev/null and b/network/ngrep/ngrep-1.45-fixipv6.patch.xz differ
diff --git a/network/ngrep/ngrep-1.45-install.patch.xz b/network/ngrep/ngrep-1.45-install.patch.xz
new file mode 100644
index 0000000..4ace55a
Binary files /dev/null and b/network/ngrep/ngrep-1.45-install.patch.xz differ
diff --git a/network/ngrep/ngrep-1.45-nodebug.patch.xz b/network/ngrep/ngrep-1.45-nodebug.patch.xz
new file mode 100644
index 0000000..84089ff
Binary files /dev/null and b/network/ngrep/ngrep-1.45-nodebug.patch.xz differ
diff --git a/network/ngrep/ngrep-1.45-usesystempcre.patch.xz b/network/ngrep/ngrep-1.45-usesystempcre.patch.xz
new file mode 100644
index 0000000..009f856
Binary files /dev/null and b/network/ngrep/ngrep-1.45-usesystempcre.patch.xz differ
diff --git a/network/ngrep/ngrep.build b/network/ngrep/ngrep.build
new file mode 100755
index 0000000..7616dae
--- /dev/null
+++ b/network/ngrep/ngrep.build
@@ -0,0 +1,62 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=ngrep
+VERSION=1.45
+BUILD=2
+DEPENDS=('tcpip >= 20130209-1' 'pcre >= 8.32-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: ngrep (network grep)
+${NAME}:
+${NAME}: Ngrep strives to provide most of GNU grep's common features, applying
+${NAME}: them to the network layer. It is a PCAP-aware tool that allows
+${NAME}: specifying extended regular or hexadecimal expressions to match
+${NAME}: against data payloads of packets. It currently recognizes IPv4/6,
+${NAME}: TCP, UDP, ICMPv4/6, IGMP and Raw across Ethernet, PPP, SLIP, FDDI,
+${NAME}: Token Ring and null interfaces.
+${NAME}:
+${NAME}: Homepage: http://ngrep.sourceforge.net
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=${URL[sf]}/${SRCNAME[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.bz2
+
+build0()
+{
+LDFLAGS="-lnl-genl-3 -lpcre" \
+CPPFLAGS="-I${SYS_DIR[include]}/pcre" \
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[conf]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-pcap-includes="${SYS_DIR[include]}/pcap" \
+ --enable-ipv6 \
+ --enable-pcre
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc doc/CREDITS.txt
+changelog doc/CHANGES.txt
+license LICENSE.txt
+}
diff --git a/network/nload/nload.build b/network/nload/nload.build
new file mode 100755
index 0000000..8b404ea
--- /dev/null
+++ b/network/nload/nload.build
@@ -0,0 +1,58 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=nload
+VERSION=0.7.4
+BUILD=2
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: nload
+${NAME}:
+${NAME}: A console application which monitors network traffic and bandwidth
+${NAME}: usage in real time. It visualizes the in- and outgoing traffic using
+${NAME}: two graphs and provides additional info like total amount of
+${NAME}: transferred data and min/max network usage.
+${NAME}:
+${NAME}: Homepage: http://www.roland-riegel.de/nload
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://www.roland-riegel.de/nload/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}"
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog ChangeLog
+gunzip ${PKG}${SYS_DIR[man]}/man?/*.?.gz
+}
diff --git a/network/nmap/nmap-6.25-pcaplink.patch.xz b/network/nmap/nmap-6.25-pcaplink.patch.xz
new file mode 100644
index 0000000..3e58d98
Binary files /dev/null and b/network/nmap/nmap-6.25-pcaplink.patch.xz differ
diff --git a/network/nmap/nmap.build b/network/nmap/nmap.build
new file mode 100755
index 0000000..539cec4
--- /dev/null
+++ b/network/nmap/nmap.build
@@ -0,0 +1,75 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=nmap
+VERSION=6.25
+BUILD=1
+DEPENDS=('tcpip >= 20130209-1' 'openssl >= 1.0.1e-1' 'pcre >= 8.32-1' 'lua >= 5.2.2-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: nmap (network scanner)
+${NAME}:
+${NAME}: Nmap ("Network Mapper") is an open source utility for network
+${NAME}: exploration or security auditing. It was designed to rapidly scan
+${NAME}: large networks, although it works fine against single hosts. Nmap
+${NAME}: uses raw IP packets in novel ways to determine what hosts are
+${NAME}: available on the network, what services (ports) they are offering,
+${NAME}: what operating system (and OS version) they are running, what type of
+${NAME}: packet filters/firewalls are in use, and dozens of other
+${NAME}: characteristics.
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://download.insecure.org/nmap/dist/${SRCNAME[0]}-${SRCVERS[0]}.tar.bz2
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+CPPFLAGS="-I${SYS_DIR[include]}/pcap" \
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" MYCFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --enable-static=yes \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --libexecdir="${SYS_DIR[lib]}/exec" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-openssl="${SYS_DIR[usr]}" \
+ --with-libpcap="${SYS_DIR[usr]}" \
+ --with-libpcre="${SYS_DIR[usr]}" \
+ --with-liblua="${SYS_DIR[usr]}" \
+ --with-libdnet=included \
+ --with-liblinear=included \
+ --without-nmap-update \
+ --without-zenmap \
+ --without-ndiff
+#--with-liblua=included
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog CHANGELOG
+#rmdir ${PKG}${SYS_DIR[share]}/nping
+rm -f \
+  ${PKG}${SYS_DIR[lib]}/*.a
+}
diff --git a/network/openobex/openobex.build b/network/openobex/openobex.build
new file mode 100755
index 0000000..7f7ab5b
--- /dev/null
+++ b/network/openobex/openobex.build
@@ -0,0 +1,126 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=openobex
+VERSION=1.5
+BUILD=1
+DEPENDS=('usb >= 1.0.15-1' 'bluetooth >= 4.101-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: obex (Object Exchange protocol)
+${NAME}:
+${NAME}: An implementation of the Object Exchange (OBEX) protocol. OBEX is a
+${NAME}: session protocol and can best be described as a binary HTTP protocol.
+${NAME}: OBEX is optimised for ad-hoc wireless links and can be used to
+${NAME}: exchange all kinds of objects like files, pictures, calendar entries
+${NAME}: (vCal) and business cards (vCard) from and to mobile phones.
+${NAME}:
+${NAME}: Homepage: http://www.openobex.org
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=openobex
+SRCVERS[0]=1.5
+SRCPACK[0]=http://www.kernel.org/pub/linux/bluetooth/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="GPL2 LGPL21"
+
+build0()
+{
+#FIXME: kludge
+if [ "$(uname -m)" == "x86_64" ]; then
+EXTRA_CFLAGS="-fPIC"
+fi
+sed -i 's|/lib/pkgconfig|/share/pkgconfig|g' configure
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.{in,am}
+CFLAGS="${FLAGS} ${EXTRA_CFLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --enable-apps \
+ --enable-irda \
+ --enable-bluetooth \
+ --enable-usb
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog ChangeLog
+}
+
+SRCNAME[1]=obexftp
+SRCVERS[1]=0.23
+SRCPACK[1]=${URL[sf]}/openobex/${SRCNAME[1]}-${SRCVERS[1]}.tar.bz2
+SRCCOPY[1]="GPL2"
+
+build1()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.{in,am}
+CPPFLAGS="-I${PKG}${SYS_DIR[include]}" \
+OPENOBEX_CFLAGS="-I${PKG}${SYS_DIR[include]}" \
+OPENOBEX_LIBS="-L${PKG}${SYS_DIR[lib]} -lopenobex" \
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-rpath \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --disable-python \
+ --disable-perl \
+ --disable-ruby
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS THANKS
+changelog ChangeLog
+}
+
+SRCNAME[2]=obexfs
+SRCVERS[2]=0.12
+SRCPACK[2]=${URL[sf]}/openobex/${SRCNAME[2]}-${SRCVERS[2]}.tar.gz
+SRCCOPY[2]="GPL2"
+
+build2()
+{
+OBEXFTP_CFLAGS="-I${PKG}${SYS_DIR[include]}" \
+OBEXFTP_LIBS="-L${PKG}${SYS_DIR[lib]} -lobexftp -lmulticobex -lbfb" \
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}"
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog ChangeLog
+}
diff --git a/network/openssh/openssh-6.2p1-systemd.patch.xz b/network/openssh/openssh-6.2p1-systemd.patch.xz
new file mode 100644
index 0000000..e0d0fd1
Binary files /dev/null and b/network/openssh/openssh-6.2p1-systemd.patch.xz differ
diff --git a/network/openssh/openssh-6.2p1-sysvinit.patch.xz b/network/openssh/openssh-6.2p1-sysvinit.patch.xz
new file mode 100644
index 0000000..bf2e288
Binary files /dev/null and b/network/openssh/openssh-6.2p1-sysvinit.patch.xz differ
diff --git a/network/openssh/openssh-6.2p1-tmpfilesd.patch.xz b/network/openssh/openssh-6.2p1-tmpfilesd.patch.xz
new file mode 100644
index 0000000..2ea4eb3
Binary files /dev/null and b/network/openssh/openssh-6.2p1-tmpfilesd.patch.xz differ
diff --git a/network/openssh/openssh.build b/network/openssh/openssh.build
new file mode 100755
index 0000000..1d55520
--- /dev/null
+++ b/network/openssh/openssh.build
@@ -0,0 +1,122 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=openssh
+VERSION=6.2p1
+BUILD=1
+DEPENDS=('openssl >= 1.0.1e-1' 'tcpip >= 20130209-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: openssh (Secure Shell daemon and clients)
+${NAME}:
+${NAME}: ssh (Secure Shell) is a program for logging into a remote machine and
+${NAME}: for executing commands on a remote machine.  It is intended to
+${NAME}: replace rlogin and rsh, and provide secure encrypted communications
+${NAME}: between two untrusted hosts over an insecure network. sshd (SSH
+${NAME}: Daemon) is the daemon program for ssh.  OpenSSH is based on the last
+${NAME}: free version of Tatu Ylonen's SSH, further enhanced and cleaned up by
+${NAME}: Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos, Theo de Raadt,
+${NAME}: and Dug Song. It has a homepage at http://www.openssh.com
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/ssh/ssh_config.new
+config etc/ssh/sshd_config.new
+config etc/rc.d/rc.sshd.new
+
+# If the sshd user/group/shadow don't exist, add them:
+
+if ! grep -q "^sshd:" etc/passwd ; then
+  echo "sshd:x:33:33:sshd:/:" >> etc/passwd
+fi
+
+if ! grep -q "^sshd:" etc/group ; then
+  echo "sshd::33:sshd" >> etc/group
+fi
+
+if ! grep -q "^sshd:" etc/shadow ; then
+  echo "sshd:*:9797:0:::::" >> etc/shadow
+fi
+
+# Add a btmp file to store login failure if one doesn't exist:
+
+if [ ! -r var/log/btmp ]; then
+  ( cd var/log ; umask 077 ; touch btmp )
+fi
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://ftp.belnet.be/pub/OpenBSD/OpenSSH/portable/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+
+build0()
+{
+#FIXME: PAM
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}/ssh" \
+ --libdir="${SYS_DIR[lib]}" \
+ --libexecdir="${SYS_DIR[lib]}/exec" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --without-pam \
+ --with-xauth="${SYS_DIR[bin]}/xauth" \
+ --with-pid-dir="${SYS_DIR[run]}/sshd" \
+ --with-default-path="/usr/local/sbin:/usr/sbin:/usr/local/bin:/usr/bin" \
+ --with-md5-passwords \
+ --with-tcp-wrappers \
+ --with-privsep-user=sshd \
+ --with-privsep-path="${SYS_DIR[var]}/empty"
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc CREDITS README.{dns,privsep,tun}
+changelog ChangeLog
+license LICENCE
+install.dir ${PKG}${SYS_DIR[var]}/empty
+install.dir ${PKG}${SYS_DIR[etc]}/{rc.d,tmpfiles.d}
+install.bin rc.sshd.new ${PKG}${SYS_DIR[etc]}/rc.d
+install.dat sshd.conf.tmpfilesd ${PKG}${SYS_DIR[etc]}/tmpfiles.d/sshd.conf
+install.bin contrib/ssh-copy-id ${PKG}${SYS_DIR[bin]}
+install.man contrib/ssh-copy-id.1 ${PKG}${SYS_DIR[man]}/man1
+install.dir ${PKG}${SYS_DIR[systemdsystemunitdir]}
+install.cfg systemd/* ${PKG}${SYS_DIR[systemdsystemunitdir]}
+(
+  cd ${PKG}${SYS_DIR[etc]}/ssh
+  rm -f ssh_host*key.*
+  mv ssh_config ssh_config.new
+  mv sshd_config sshd_config.new
+)
+}
diff --git a/network/pidgin/pbar-0.3-makefile.patch.xz b/network/pidgin/pbar-0.3-makefile.patch.xz
new file mode 100644
index 0000000..e737aa6
Binary files /dev/null and b/network/pidgin/pbar-0.3-makefile.patch.xz differ
diff --git a/network/pidgin/pidgin-nudge-20101006-makefile.patch.xz b/network/pidgin/pidgin-nudge-20101006-makefile.patch.xz
new file mode 100644
index 0000000..132b862
Binary files /dev/null and b/network/pidgin/pidgin-nudge-20101006-makefile.patch.xz differ
diff --git a/network/pidgin/pidgin.build b/network/pidgin/pidgin.build
new file mode 100755
index 0000000..a259479
--- /dev/null
+++ b/network/pidgin/pidgin.build
@@ -0,0 +1,175 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=pidgin
+VERSION=2.10.7
+BUILD=1
+DEPENDS=('gtk+ >= 2.24.17-1' 'libxml >= 2.9.0-1' 'gnutls >= 3.1.10-1' 'gstreamer >= 1.0.6-1' 'farstream >= 0.2.2-1' 'dbus_glib >= 0.100.2-1' 'networkmanager >= 0.9.8.0-1')
+OPTDEPENDS=('libotr >= 4.0.0-1' 'libnotify >= 0.7.5-1' 'avahi >= 0.6.31-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: Pidgin (multi-protocol chat client)
+${NAME}:
+${NAME}: Pidgin is an instant message client that supports many protocols,
+${NAME}: including MSN, AIM, Yahoo!, Jabber, ICQ, IRC, Groupwise, SILC,
+${NAME}: Gadu-Gadu and Zephyr.
+${NAME}:
+${NAME}: Homepage: http://pidgin.im
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+cat > ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+if [ -x usr/bin/gtk-update-icon-cache ]; then
+  usr/bin/gtk-update-icon-cache -q -t -f usr/share/icons/hicolor
+fi
+EOF
+
+# Sources
+
+export PKG_CONFIG_PATH="${PKG}${SYS_DIR[share]}/pkgconfig"
+export PIDGIN_INCS="-I${PKG}${SYS_DIR[include]}/pidgin -I${PKG}${SYS_DIR[include]}/libpurple"
+
+configure()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ ${*}
+}
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=${URL[sf]}/${SRCNAME[0]}/files/Pidgin/${SRCVERS[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.bz2
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' $(find . -name "Makefile.in")
+sed -i 's|$(libdir)/gnt|$(libdir)/plugins/gnt|g' $(find finch -name "Makefile.in")
+sed -i 's|$(libdir)/finch|$(libdir)/plugins/finch|g' $(find finch -name "Makefile.in")
+sed -i 's|$(libdir)/pidgin|$(libdir)/plugins/pidgin|g' $(find pidgin -name "Makefile.in")
+sed -i 's|${libdir}/pidgin|${libdir}/plugins/pidgin|g' $(find pidgin -name "*.pc.in")
+sed -i 's|$(libdir)/purple-$(PURPLE_MAJOR_VERSION)|$(libdir)/plugins/purple-$(PURPLE_MAJOR_VERSION)|g' $(find libpurple -name "Makefile.in")
+sed -i 's|${libdir}/purple-@PURPLE_MAJOR_VERSION@|${libdir}/plugins/purple-@PURPLE_MAJOR_VERSION@|g' $(find libpurple -name "*.pc.in")
+configure \
+ --disable-silent-rules \
+ --disable-debug \
+ --disable-perl \
+ --disable-tcl \
+ --disable-doxygen \
+ --disable-schemas-install \
+ --disable-startup-notification \
+ --disable-meanwhile \
+ --disable-gtkspell \
+ --disable-gstreamer \
+ --disable-vv \
+ --enable-gnutls=yes \
+ --enable-cap \
+ --enable-nm \
+ --with-system-ssl-certs="${SYS_DIR[etc]}/ssl/certs"
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+doc AUTHORS COPYRIGHT doc/gtkrc-2.0
+changelog ChangeLog
+#FIXME: Finch ought to be a subpackage
+}
+
+SRCNAME[1]=${NAME}-otr
+SRCVERS[1]=4.0.0
+SRCPACK[1]=${URL[sf]}/${SRCNAME[1]}/${SRCNAME[1]}-${SRCVERS[1]}.tar.gz
+SRCCOPY[1]="GPL2"
+
+build1()
+{
+sed -i 's|${libdir}/pidgin|${libdir}/plugins/pidgin|g' Makefile.{am,in}
+CPPFLAGS="${PIDGIN_INCS}" \
+configure
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog NEWS
+}
+
+SRCNAME[2]=${NAME}-nudge
+SRCVERS[2]=20101006
+SRCPACK[2]=${SRCNAME[2]}-${SRCVERS[2]}.tar.xz
+
+build2()
+{
+sed -i 's|$(LIBDIR)/purple-2|$(LIBDIR)/plugins/purple-2|g' Makefile
+make ${JOBS} CFLAGS="${FLAGS}" Q="" \
+ EXTRA_CFLAGS="${PIDGIN_INCS}" \
+ EXTRA_LIBS="-L${PKG}${SYS_DIR[lib]}"
+make install DESTDIR="${PKG}" LIBDIR="${SYS_DIR[lib]}"
+}
+
+SRCNAME[3]=purple-libnotify-plus
+SRCVERS[3]=20130423
+SRCPACK[3]=${SRCNAME[3]}-${SRCVERS[3]}.tar.xz
+SRCCOPY[3]="GPL3"
+
+build3()
+{
+CPPFLAGS="${PIDGIN_INCS}" \
+configure \
+ --with-purple-plugindir="${SYS_DIR[lib]}/plugins/purple-2"
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS
+}
+
+SRCNAME[4]=pidgin-musictracker
+SRCVERS[4]=0.4.22
+SRCPACK[4]=http://${SRCNAME[4]}.googlecode.com/files/${SRCNAME[4]}-${SRCVERS[4]}.tar.bz2
+SRCCOPY[4]="GPL2"
+
+build4()
+{
+sed -i 's|$(libdir)/pidgin|$(libdir)/plugins/pidgin|g' $(find . -name "Makefile.in")
+PIDGIN_CFLAGS="${PIDGIN_INCS}" \
+configure
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog ChangeLog
+}
+
+SRCNAME[5]=pbar
+SRCVERS[5]=0.3
+SRCPACK[5]=${SRCNAME[5]}-${SRCVERS[5]}.tar.xz
+SRCCOPY[5]="GPL3"
+
+build5()
+{
+make ${JOBS} OPTS="${FLAGS}" \
+ EXTRA_CFLAGS="${PIDGIN_INCS}" \
+ EXTRA_LIBS="-L${PKG}${SYS_DIR[lib]} -lpurple"
+make install DESTDIR="${PKG}" PREFIX="${SYS_DIR[usr]}"
+changelog ChangeLog
+}
diff --git a/network/pidgin_tox/pidgin_tox.build b/network/pidgin_tox/pidgin_tox.build
new file mode 100755
index 0000000..c27aea9
--- /dev/null
+++ b/network/pidgin_tox/pidgin_tox.build
@@ -0,0 +1,62 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=pidgin_tox
+VERSION=$(date +%Y%m%d)
+BUILD=1
+DEPENDS=('tox >= 20140422-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: pidgin_tox
+${NAME}:
+${NAME}: A Tox protocol plugin for pidgin.
+${NAME}:
+${NAME}: Homepage: http://tox.dhs.org
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=git://github.com/jin-eld/tox-prpl.git
+SRCCOPY[0]="GPL3"
+
+build0()
+{
+sed -i 's|$(libdir)/purple-$(PURPLE_MAJOR_VERSION)|$(libdir)/plugins/purple-$(PURPLE_MAJOR_VERSION)|g' build/Makefile.am
+autoreconf -i
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}"
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+doc AUTHORS
+}
diff --git a/network/pktstat/pktstat-1.8.5-notermcap.patch.xz b/network/pktstat/pktstat-1.8.5-notermcap.patch.xz
new file mode 100644
index 0000000..542857c
Binary files /dev/null and b/network/pktstat/pktstat-1.8.5-notermcap.patch.xz differ
diff --git a/network/pktstat/pktstat.build b/network/pktstat/pktstat.build
new file mode 100755
index 0000000..b422c9c
--- /dev/null
+++ b/network/pktstat/pktstat.build
@@ -0,0 +1,56 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=pktstat
+VERSION=1.8.5
+BUILD=2
+DEPENDS=('tcpip >= 20130127-1' 'usb >= 1.0.14-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: pktstat
+${NAME}:
+${NAME}: Displays a real-time list of active connections seen on a network
+${NAME}: interface and how much bandwidth is being used by what. It also
+${NAME}: partially decodes HTTP and FTP protocols to show what file name is
+${NAME}: being tranferred.
+${NAME}:
+${NAME}: Homepage: http://www.adaptive-enterprises.com.au/~d/software/pktstat
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://www.adaptive-enterprises.com.au/~d/software/pktstat/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+
+build0()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}"
+make ${JOBS}
+make install DESTDIR="${PKG}"
+changelog NEWS
+}
diff --git a/network/rdesktop/rdesktop.build b/network/rdesktop/rdesktop.build
new file mode 100755
index 0000000..d702c22
--- /dev/null
+++ b/network/rdesktop/rdesktop.build
@@ -0,0 +1,63 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=rdesktop
+VERSION=1.8.2
+BUILD=1
+DEPENDS=('xorg_libs >= 7.7-4' 'openssl >= 1.0.1g-1' 'sound >= 1.0.27-1' 'libsamplerate >= 0.1.8-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: rdesktop
+${NAME}:
+${NAME}: A client for Windows NT Terminal Server and Windows 2000/2003
+${NAME}: Terminal Services, capable of natively speaking the Remote Desktop
+${NAME}: Protocol (RDP) in or order to present the user's NT desktop. Unlike
+${NAME}: Citrix ICA, no server extensions are required.
+${NAME}:
+${NAME}: Homepage: http://www.rdesktop.org
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=${URL[sf]}/${SRCNAME[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="GPL3"
+
+build0()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[conf]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --datadir="${SYS_DIR[share]}/application-data" \
+ --disable-credssp \
+ --disable-smartcard \
+ --with-libvncserver \
+ --with-sound=alsa \
+ --with-ipv6
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc doc/AUTHORS
+changelog doc/ChangeLog
+}
diff --git a/network/reaver/reaver-1.4-includes.patch.xz b/network/reaver/reaver-1.4-includes.patch.xz
new file mode 100644
index 0000000..22d0168
Binary files /dev/null and b/network/reaver/reaver-1.4-includes.patch.xz differ
diff --git a/network/reaver/reaver.build b/network/reaver/reaver.build
new file mode 100755
index 0000000..69cbcb1
--- /dev/null
+++ b/network/reaver/reaver.build
@@ -0,0 +1,66 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=reaver
+VERSION=1.4
+BUILD=2
+DEPENDS=('tcpip >= 20130209-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: reaver
+${NAME}:
+${NAME}: A tool that implements a brute force attack against WiFi Protected
+${NAME}: Setup (WPS) registrar PINs in order to recover WPA/WPA2 passphrases.
+${NAME}: It has been designed to be a robust and practical attack against WPS,
+${NAME}: and has been tested against a wide variety of access points and WPS
+${NAME}: implementations. On average, Reaver will recover the target AP's
+${NAME}: plain text WPA/WPA2 passphrase in 4 to 10 hours, depending on the AP.
+${NAME}:
+${NAME}: Homepage: http://code.google.com/p/reaver-wps
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://reaver-wps.googlecode.com/files/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+(
+cd src
+LDFLAGS="-lnl-genl-3" \
+CPPFLAGS="-I${SYS_DIR[include]}/sqlite-3" \
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[var]}/lib" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}"
+make ${JOBS} V=1
+#make install DESTDIR="${PKG}"
+)
+doc docs/README.{REAVER,WASH}
+install.dir ${PKG}${SYS_DIR[man]}/man1
+zcat docs/reaver.1.gz > ${PKG}${SYS_DIR[man]}/man1/reaver.1
+install.dir ${PKG}${SYS_DIR[bin]}
+install.bin src/reaver src/wash ${PKG}${SYS_DIR[bin]}
+install.dir ${PKG}${SYS_DIR[var]}/lib/reaver
+}
diff --git a/network/rsync/rsync.build b/network/rsync/rsync.build
new file mode 100755
index 0000000..9b59f3e
--- /dev/null
+++ b/network/rsync/rsync.build
@@ -0,0 +1,56 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=rsync
+VERSION=3.0.9
+BUILD=2
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: rsync (remote file sync)
+${NAME}:
+${NAME}: rsync is a replacement for rcp that has many more features. It uses
+${NAME}: the "rsync algorithm" which provides a very fast method for bringing
+${NAME}: remote files into sync. It does this by sending just the differences
+${NAME}: in the files across the link, without requiring that both sets of
+${NAME}: files are present at one of the ends of the link beforehand.
+${NAME}:
+${NAME}: rsync was written by Andrew Tridgell and Paul Mackerras.
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://samba.anu.edu.au/ftp/rsync/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="GPL3"
+
+build0()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-rsyncd-conf="${SYS_DIR[conf]}"
+make ${JOBS}
+make install DESTDIR="${PKG}"
+changelog NEWS
+}
diff --git a/network/silc/silc-toolkit-1.1.3-heimdal.patch.bz2 b/network/silc/silc-toolkit-1.1.3-heimdal.patch.bz2
new file mode 100644
index 0000000..4b06387
Binary files /dev/null and b/network/silc/silc-toolkit-1.1.3-heimdal.patch.bz2 differ
diff --git a/network/silc/silc-toolkit-1.1.3-nodebug.patch.bz2 b/network/silc/silc-toolkit-1.1.3-nodebug.patch.bz2
new file mode 100644
index 0000000..dc12cde
Binary files /dev/null and b/network/silc/silc-toolkit-1.1.3-nodebug.patch.bz2 differ
diff --git a/network/silc/silc.build b/network/silc/silc.build
new file mode 100755
index 0000000..47e474f
--- /dev/null
+++ b/network/silc/silc.build
@@ -0,0 +1,89 @@
+#!/bin/bash
+
+source /usr/src/ports/Build/build.sh
+
+PACKAGER="Witukind <witukind@nsbm.kicks-ass.org>"
+ARCH=i586
+BUILD=1
+
+# Sources
+SRCNAME[0]=silc-toolkit
+SRCVER[0]=1.1.3
+SRCREP[0]=http://silcnet.org/download/toolkit/sources
+SRCPKG[0]=${SRCNAME[0]}-${SRCVER[0]}.tar.bz2
+SRCROOT[0]=${SRCNAME[0]}-${SRCVER[0]}
+
+# Packages
+PKGNAME[0]=libsilc
+PKGVER[0]=${SRCVER[0]}
+PKGARCH[0]=${ARCH}
+
+PKGNAME[1]=${PKGNAME[0]}_dev
+PKGVER[1]=${SRCVER[0]}
+PKGARCH[1]=${ARCH}
+PKGOPTS[1]="nodocdir"
+
+PKGNAME[2]=${PKGNAME[0]}_doc
+PKGVER[2]=${SRCVER[0]}
+PKGARCH[2]=${ARCH}
+PKGOPTS[2]="nodocdir"
+
+begin
+
+(
+  cd ${SRC[0]}
+  CFLAGS=$DISTFLAGS CXXFLAGS=$DISTFLAGS \
+  ./configure \
+  --enable-static=no \
+  --enable-shared=yes \
+  --prefix=/usr \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/srv/www/doc/silc \
+  --includedir=/usr/include/silc \
+  --with-simdir=/usr/libexec/silc \
+  --enable-ipv6 \
+  --with-gmp=/usr \
+  $ARCH-pc-linux-gnu
+  make
+  make install DESTDIR=${PKG[0]}
+
+  mkdir -p \
+   ${PKG[1]}/usr/{lib,doc/${PKGNAME[0]}-${PKGVER[0]}} \
+   ${PKG[2]}/srv/www/doc
+
+  mv \
+   ${PKG[0]}/srv/www/doc/silc/*.txt \
+   ${PKG[1]}/usr/doc/${PKGNAME[0]}-${PKGVER[0]}
+
+  mv \
+   ${PKG[0]}/srv/www/doc/silc/tutorial/mybot \
+   ${PKG[1]}/usr/doc/${PKGNAME[0]}-${PKGVER[0]}/tutorial
+
+  mv \
+   ${PKG[0]}/srv/www/doc/silc/CHANGES \
+   ${PKG[0]}/srv/www/doc/silc/CREDITS \
+   ${PKG[0]}/srv/www/doc/silc/FAQ \
+   ${PKG[0]}/srv/www/doc/silc/README \
+   ${PKG[0]}/srv/www/doc/silc/TODO \
+   ${PKG[0]}/usr/doc/${PKGNAME[0]}-${PKGVER[0]}
+
+  mv \
+   ${PKG[0]}/srv/www/doc/silc/toolkit \
+   ${PKG[2]}/srv/www/doc/silc
+
+  mv \
+   ${PKG[0]}/usr/include \
+   ${PKG[1]}/usr
+
+  mv \
+   ${PKG[0]}/usr/lib/pkgconfig \
+   ${PKG[1]}/usr/lib
+
+  rm -rf \
+   ${PKG[0]}/srv
+
+  chmod 0755 ${PKG[0]}/usr/libexec/silc/*.so*
+)
+
+end
diff --git a/network/skype/skype.build b/network/skype/skype.build
new file mode 100755
index 0000000..9c44bac
--- /dev/null
+++ b/network/skype/skype.build
@@ -0,0 +1,60 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=skype
+VERSION=2.2.0.35
+BUILD=1
+
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: skype
+${NAME}:
+${NAME}: Skype uses P2P (peer-to-peer) technology to provide voice-based 
+${NAME}: communication with other Internet users. The technology is extremely
+${NAME}: advanced, but easy to use. It features excellent sound quality,
+${NAME}: end-to-end encryption, and automatic negotiation of firewalls or
+${NAME}: routers.
+${NAME}:
+${NAME}: Homepage: http://www.skype.com
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}_static
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://download.skype.com/linux/${SRCNAME[0]}-${SRCVERS[0]}.tar.bz2
+
+build0()
+{
+doc README
+license LICENSE
+install.dir ${PKG}${SYS_DIR[bin]}
+install.bin skype ${PKG}${SYS_DIR[bin]}
+install.dir ${PKG}/usr/share/applications
+install.dat skype.desktop ${PKG}/usr/share/applications
+install.dir ${PKG}/usr/share/icons/hicolor/{16x16,32x32,48x48}/apps
+install.dat icons/SkypeBlue_16x16.png ${PKG}/usr/share/icons/hicolor/16x16/apps/skype.png
+install.dat icons/SkypeBlue_32x32.png ${PKG}/usr/share/icons/hicolor/32x32/apps/skype.png
+install.dat icons/SkypeBlue_48x48.png ${PKG}/usr/share/icons/hicolor/48x48/apps/skype.png
+install.dir ${PKG}/etc/dbus-1/system.d
+install.dat skype.conf ${PKG}/etc/dbus-1/system.d
+install.dir ${PKG}/usr/share/skype/{lang,sounds,avatars}
+install.dat lang/*.{qm,ts} ${PKG}/usr/share/skype/lang
+install.dat sounds/*.wav ${PKG}/usr/share/skype/sounds
+install.dat avatars/*.png ${PKG}/usr/share/skype/avatars
+}
diff --git a/network/snmp/net-snmp-5.7.2-config.patch.xz b/network/snmp/net-snmp-5.7.2-config.patch.xz
new file mode 100644
index 0000000..bcc8136
Binary files /dev/null and b/network/snmp/net-snmp-5.7.2-config.patch.xz differ
diff --git a/network/snmp/net-snmp-5.7.2-createv3useretcsnmpdconf.patch.xz b/network/snmp/net-snmp-5.7.2-createv3useretcsnmpdconf.patch.xz
new file mode 100644
index 0000000..046d14c
Binary files /dev/null and b/network/snmp/net-snmp-5.7.2-createv3useretcsnmpdconf.patch.xz differ
diff --git a/network/snmp/net-snmp-5.7.2-libnl32.patch.xz b/network/snmp/net-snmp-5.7.2-libnl32.patch.xz
new file mode 100644
index 0000000..d682681
Binary files /dev/null and b/network/snmp/net-snmp-5.7.2-libnl32.patch.xz differ
diff --git a/network/snmp/net-snmp-5.7.2-systemd.patch.xz b/network/snmp/net-snmp-5.7.2-systemd.patch.xz
new file mode 100644
index 0000000..6046b61
Binary files /dev/null and b/network/snmp/net-snmp-5.7.2-systemd.patch.xz differ
diff --git a/network/snmp/net-snmp-5.7.2-sysvinit.patch.xz b/network/snmp/net-snmp-5.7.2-sysvinit.patch.xz
new file mode 100644
index 0000000..0b62380
Binary files /dev/null and b/network/snmp/net-snmp-5.7.2-sysvinit.patch.xz differ
diff --git a/network/snmp/snmp.build b/network/snmp/snmp.build
new file mode 100755
index 0000000..ed85bbc
--- /dev/null
+++ b/network/snmp/snmp.build
@@ -0,0 +1,106 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=snmp
+VERSION=5.7.2
+BUILD=2
+DEPENDS=('tcpip >= 20130209-1' 'openssl >= 1.0.1d-1' 'pci >= 20130214-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: snmp
+${NAME}:
+${NAME}: The Simple Network Management Protocol (SNMP) is a standard protocol
+${NAME}: for managing devices on IP networks. Devices that typically support
+${NAME}: SNMP include routers, switches, servers, workstations, printers,
+${NAME}: modem racks and more. It used mostly in network management systems
+${NAME}: to monitor network-attached devices. It exposes management data in
+${NAME}: the form of variables on the managed systems, which describe the
+${NAME}: system configuration which can be queried (and sometimes set) by
+${NAME}: managing applications.
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+# Keep same perms on rc.snmpd.new:
+if [ -e etc/rc.d/rc.snmpd ]; then
+  cp -a etc/rc.d/rc.snmpd etc/rc.d/rc.snmpd.new.incoming
+  cat etc/rc.d/rc.snmpd.new > etc/rc.d/rc.snmpd.new.incoming
+  mv etc/rc.d/rc.snmpd.new.incoming etc/rc.d/rc.snmpd.new
+fi
+
+config etc/snmp/snmpd.conf.new
+config etc/rc.d/rc.snmpd.new
+EOF
+
+# Sources
+
+SRCNAME[0]=net-snmp
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=${URL[sf]}/net-snmp/${SRCNAME[0]}/${SRCVERS[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+
+build0()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-debugging \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}/snmp" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --without-rpm \
+ --with-persistent-directory="${SYS_DIR[var]}/lib/snmp" \
+ --with-logfile="${SYS_DIR[var]}/log/snmpd.log" \
+ --with-sys-contact="root@localhost" \
+ --with-sys-location="Unknown" \
+ --with-default-snmp-version=3 \
+ --with-libwrap \
+ --disable-embedded-perl \
+ --enable-ipv6
+make ${JOBS} INSTALLDIRS="vendor" NET_SNMP_DONT_CHECK_VERSION=1
+make install INSTALLDIRS="vendor" DESTDIR="${PKG}"
+doc FAQ README README.snmpv3
+changelog NEWS
+license COPYING
+install.dir ${PKG}${SYS_DIR[etc]}/{rc.d,snmp,tmpfiles.d}
+install.cfg rc.snmpd ${PKG}${SYS_DIR[etc]}/rc.d/rc.snmpd.new
+install.cfg snmpd.conf.tmpfilesd ${PKG}${SYS_DIR[etc]}/tmpfiles.d/snmpd.conf
+install.dir ${PKG}${SYS_DIR[systemdsystemunitdir]}
+install.cfg snmpd.service ${PKG}${SYS_DIR[systemdsystemunitdir]}
+install.cfg snmpd.conf ${PKG}${SYS_DIR[etc]}/snmp/snmpd.conf.new
+install.dir ${PKG}${SYS_DIR[var]}/lib/snmp
+rm -rf \
+ ${PKG}${SYS_DIR[lib]}{,64}/perl5 \
+ ${PKG}${SYS_DIR[man]}/man3/*SNMP*.3
+}
diff --git a/network/snownews/snownews-1.5.12-cflags.patch.xz b/network/snownews/snownews-1.5.12-cflags.patch.xz
new file mode 100644
index 0000000..2922a92
Binary files /dev/null and b/network/snownews/snownews-1.5.12-cflags.patch.xz differ
diff --git a/network/stunnel/stunnel-4.56-config.patch.xz b/network/stunnel/stunnel-4.56-config.patch.xz
new file mode 100644
index 0000000..ddca7e7
Binary files /dev/null and b/network/stunnel/stunnel-4.56-config.patch.xz differ
diff --git a/network/stunnel/stunnel-4.56-genkey.patch.xz b/network/stunnel/stunnel-4.56-genkey.patch.xz
new file mode 100644
index 0000000..d886b4d
Binary files /dev/null and b/network/stunnel/stunnel-4.56-genkey.patch.xz differ
diff --git a/network/stunnel/stunnel-4.56-nopemgen.patch.xz b/network/stunnel/stunnel-4.56-nopemgen.patch.xz
new file mode 100644
index 0000000..3ed6c80
Binary files /dev/null and b/network/stunnel/stunnel-4.56-nopemgen.patch.xz differ
diff --git a/network/stunnel/stunnel-4.56-tmpfilesd.patch.xz b/network/stunnel/stunnel-4.56-tmpfilesd.patch.xz
new file mode 100644
index 0000000..e104f5b
Binary files /dev/null and b/network/stunnel/stunnel-4.56-tmpfilesd.patch.xz differ
diff --git a/network/stunnel/stunnel.build b/network/stunnel/stunnel.build
new file mode 100755
index 0000000..f799894
--- /dev/null
+++ b/network/stunnel/stunnel.build
@@ -0,0 +1,121 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=stunnel
+VERSION=4.56
+BUILD=1
+DEPENDS=('tcpip >= 20130209-1' 'openssl >= 1.0.1e-1')
+OPTDEPENDS=('perl >= 5.12.3-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: stunnel (Universal SSL tunnel)
+${NAME}:
+${NAME}: The stunnel program is designed to work as an SSL encryption wrapper
+${NAME}: between remote client and local (inetd-startable) or remote servers.
+${NAME}: The goal is to facilitate SSL encryption and authentication for
+${NAME}: non-SSL-aware programs.
+${NAME}:
+${NAME}: stunnel can be used to add SSL functionality to commonly used inetd
+${NAME}: daemons like POP-2, POP-3 and IMAP servers without any changes in
+${NAME}: the programs' code.
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+# Add stunnel user & group
+
+if ! grep -q "^stunnel:" etc/group ; then
+  echo "stunnel::34:stunnel" >> etc/group
+fi
+
+if ! grep -q "^stunnel:" etc/passwd ; then
+  echo "stunnel:x:34:34:stunnel:/run/stunnel:/bin/false" >> etc/passwd
+fi
+
+if ! grep -q "^stunnel:" etc/shadow ; then
+  echo "stunnel:*:9797:0:::::" >> etc/shadow
+fi
+
+# Create chroot dir if it doesn't exist
+
+if [ ! -d run/stunnel ]; then
+  install -d -m 0770 -o stunnel -g stunnel run/stunnel
+fi
+
+config etc/stunnel/stunnel.cnf.new
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://www.usenix.org.uk/mirrors/stunnel/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+
+build0()
+{
+sed -i 's|$(libdir)/@PACKAGE@|$(libdir)/plugins/@PACKAGE@|g' src/Makefile.{am,in}
+sed -i 's|$(localstatedir)/run/stunnel|/run/stunnel|g' src/Makefile.{am,in}
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --disable-libwrap \
+ --enable-ipv6
+#NOTE: don't erase the libtool file ?
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS CREDITS
+changelog ChangeLog
+license COPYING
+install.dir ${PKG}${SYS_DIR[etc]}/{stunnel,tmpfiles.d}
+install.cfg tools/stunnel.cnf ${PKG}${SYS_DIR[etc]}/stunnel/stunnel.cnf.new
+install.bin generate-stunnel-key.sh ${PKG}${SYS_DIR[etc]}/stunnel
+install.dat stunnel.conf.tmpfiles ${PKG}${SYS_DIR[etc]}/tmpfiles.d/stunnel.conf
+install.dir ${PKG}${SYS_DIR[systemdsystemunitdir]}
+install.dat tools/stunnel.service ${PKG}${SYS_DIR[systemdsystemunitdir]}
+install.dir ${PKG}${SYS_DIR[man]}/{pl,fr}/man8
+mv \
+ ${PKG}${SYS_DIR[man]}/man8/stunnel.pl.8 \
+ ${PKG}${SYS_DIR[man]}/pl/man8/stunnel.8
+mv \
+ ${PKG}${SYS_DIR[man]}/man8/stunnel.fr.8 \
+ ${PKG}${SYS_DIR[man]}/fr/man8/stunnel.8
+rm -rf \
+  ${PKG}${SYS_DIR[doc]}/stunnel \
+  ${PKG}${SYS_DIR[var]}
+}
diff --git a/network/sylpheed/sylpheed-3.4.1-desktopfile.patch.xz b/network/sylpheed/sylpheed-3.4.1-desktopfile.patch.xz
new file mode 100644
index 0000000..afdb03d
Binary files /dev/null and b/network/sylpheed/sylpheed-3.4.1-desktopfile.patch.xz differ
diff --git a/network/sylpheed/sylpheed.build b/network/sylpheed/sylpheed.build
new file mode 100755
index 0000000..4d57664
--- /dev/null
+++ b/network/sylpheed/sylpheed.build
@@ -0,0 +1,100 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=sylpheed
+MAJOR=3.4
+VERSION=${MAJOR}.1
+BUILD=1
+DEPENDS=('gtk+ >= 2.24.17-1' 'openssl >= 1.0.1g-1' 'gpgme >= 1.3.2-1')
+OPTDEPENDS=('sqlite >= 3.7.16.1-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: sylpheed
+${NAME}:
+${NAME}: Sylpheed is an email client (and news reader) based on GTK+ aiming
+${NAME}: for quick response, a graceful and sophisticated interface, easy
+${NAME}: configuration, intuitive operation and abundant features. The
+${NAME}: interface is similar to some popular email clients for Windows, such
+${NAME}: as Outlook Express, Becky! and Datula. The interface is also
+${NAME}: designed to emulate the mailers on Emacsen, and almost all commands
+${NAME}: are accessible with the keyboard.
+${NAME}:
+${NAME}: Homepage: http://sylpheed.sraoss.jp
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://sylpheed.sraoss.jp/${SRCNAME[0]}/v${MAJOR}/${SRCNAME[0]}-${SRCVERS[0]}.tar.bz2
+SRCROOT[0]=${SRCNAME[0]}-${SRCVERS[0]}
+SRCCOPY[0]="GPL2 LGPL21"
+
+build0()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --disable-rpath \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[conf]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-plugindir="${SYS_DIR[lib]}/plugins/sylpheed" \
+ --with-themedir="${SYS_DIR[share]}/application-data/sylpheed/icons" \
+ --with-manualdir="${SYS_DIR[html]}/sylpheed_manual" \
+ --with-faqdir="${SYS_DIR[html]}/sylpheed_faq" 
+make ${JOBS} V=1
+( cd plugin/attachment_tool ; make ${JOBS} V=1)
+make install DESTDIR="${PKG}"
+( cd plugin/attachment_tool ; make install-plugin DESTDIR="${PKG}" )
+doc AUTHORS
+changelog NEWS
+install.dir ${PKG}${SYS_DIR[share]}/icons/hicolor/{64x64,128x128}/apps
+install.dat sylpheed-128x128.png ${PKG}${SYS_DIR[share]}/icons/hicolor/128x128/apps/sylpheed.png
+install.dat sylpheed-64x64.png ${PKG}${SYS_DIR[share]}/icons/hicolor/64x64/apps/sylpheed.png
+}
+
+SRCNAME[1]=sylfilter
+SRCVERS[1]=0.8
+SRCPACK[1]=http://sylpheed.sraoss.jp/${SRCNAME[1]}/src/${SRCNAME[1]}-${SRCVERS[1]}.tar.gz
+SRCCOPY[1]="BSD3"
+
+build1()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-rpath \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-libsylph="sylpheed" \
+ --with-libsylph-dir="${PKG}${SYS_DIR[usr]}"
+make ${JOBS}
+make install DESTDIR="${PKG}"
+changelog NEWS
+}
diff --git a/network/teamspeak/teamspeak.build b/network/teamspeak/teamspeak.build
new file mode 100755
index 0000000..0b82229
--- /dev/null
+++ b/network/teamspeak/teamspeak.build
@@ -0,0 +1,78 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=teamspeak
+MAJOR=3
+VERSION=${MAJOR}.0.1
+BUILD=1
+DEPENDS=('qt >= 4.7.4-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: teamspeak
+${NAME}:
+${NAME}: A Voice over IP client that allows users to speak on a chat channel
+${NAME}: with other users, much like a telephone conference call.
+${NAME}:
+${NAME}: Homepage: http://teamspeak.com
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+#FIXME: architecture kludge
+
+case "$(uname -m)" in
+  x86)
+    MYARCH=i386
+  ;;
+  x86_64)
+    MYARCH=amd64
+  ;;
+esac
+
+SRCNAME[0]=TeamSpeak${MAJOR}-Client-linux_${MYARCH}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://teamspeak.gameserver.gamed.de/ts3/releases/${SRCVERS[0]}/${SRCNAME[0]}-${SRCVERS[0]}.run
+SRCOPTS[0]="nosrcroot nounpack"
+
+build0()
+{
+install.dir ${PKG}/opt/teamspeak
+chmod +x ${CWD}/${SRCNAME[0]}-${SRCVERS[0]}.run
+${CWD}/${SRCNAME[0]}-${SRCVERS[0]}.run --noexec --target ${PKG}/opt/teamspeak
+rm -rf \
+ ${PKG}/opt/teamspeak/{imageformats,accessible} \
+ ${PKG}/opt/teamspeak/libQt*.so.4
+install.dir ${PKG}/usr/bin
+(
+  cd ${PKG}/usr/bin
+  ln -sf /opt/teamspeak/ts3client_runscript.sh teamspeak
+)
+}
+
+SRCNAME[1]=TeamSpeak${MAJOR}-Client
+SRCVERS[1]=extra
+SRCPACK[1]=${SRCNAME[1]}-${SRCVERS[1]}.tar.xz
+SRCOPTS[1]="pkgunpack"
+
+build1()
+{
+echo "Nothing to be done here!"
+}
diff --git a/network/tor/tor-0.2.4.21-config.patch.xz b/network/tor/tor-0.2.4.21-config.patch.xz
new file mode 100644
index 0000000..96928fa
Binary files /dev/null and b/network/tor/tor-0.2.4.21-config.patch.xz differ
diff --git a/network/tor/tor-0.2.4.21-datadir.patch.xz b/network/tor/tor-0.2.4.21-datadir.patch.xz
new file mode 100644
index 0000000..4389116
Binary files /dev/null and b/network/tor/tor-0.2.4.21-datadir.patch.xz differ
diff --git a/network/tor/tor-0.2.4.21-logrotate.patch.xz b/network/tor/tor-0.2.4.21-logrotate.patch.xz
new file mode 100644
index 0000000..b53ac60
Binary files /dev/null and b/network/tor/tor-0.2.4.21-logrotate.patch.xz differ
diff --git a/network/tor/tor-0.2.4.21-systemd.patch.xz b/network/tor/tor-0.2.4.21-systemd.patch.xz
new file mode 100644
index 0000000..92e4047
Binary files /dev/null and b/network/tor/tor-0.2.4.21-systemd.patch.xz differ
diff --git a/network/tor/tor.build b/network/tor/tor.build
new file mode 100755
index 0000000..7ff6314
--- /dev/null
+++ b/network/tor/tor.build
@@ -0,0 +1,153 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=tor
+VERSION=0.2.4.21
+BUILD=1
+DEPENDS=('libevent >= 2.0.21-1' 'openssl >= 1.0.1g-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: tor (The Onion Router)
+${NAME}:
+${NAME}: Tor protects you by bouncing your communications around a distributed
+${NAME}: network of relays run by volunteers all around the world: it prevents
+${NAME}: somebody watching your Internet connection from learning what sites
+${NAME}: you visit, and it prevents the sites you visit from learning your
+${NAME}: physical location. Tor works with many of your existing applications,
+${NAME}: including web browsers, instant messaging clients, remote login, and
+${NAME}: other applications based on the TCP protocol.
+${NAME}:
+${NAME}: Homepage: https://www.torproject.org
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+preserve_perms() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  if [ -e \$OLD ]; then
+    cp -a \$OLD \${NEW}.incoming
+    cat \$NEW > \${NEW}.incoming
+    mv \${NEW}.incoming \$NEW
+  fi
+  config \$NEW
+}
+
+preserve_perms etc/rc.d/rc.tor.new
+config etc/logrotate.d/tor.new
+config etc/tor/torrc.new
+config etc/tor/torsocks.conf.new
+
+# If the tor users/groups don't exist add them
+
+if grep "^tor:x:" etc/passwd 1> /dev/null 2> /dev/null ; then
+  true
+else
+  echo "tor:x:44:44:tor:/:/bin/false" >> etc/passwd
+fi
+if grep "^tor::" etc/group 1> /dev/null 2> /dev/null ; then
+  true
+else
+  echo "tor::44:tor" >> etc/group
+fi
+if grep "^tor:" etc/shadow 1> /dev/null 2> /dev/null ; then
+  true
+else
+  echo "tor:*:9797:0:::::" >> etc/shadow
+fi
+
+chown tor.tor var/lib/tor
+chmod 0700 var/lib/tor
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=https://www.torproject.org/dist/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+
+build0()
+{
+CPPFLAGS="-I${SYS_DIR[include]}/event" \
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}"
+# --enable-upnp
+# --enable-nat-pmp
+# --with-syslog-facility="LOG_DAEMON"
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+changelog ReleaseNotes
+license LICENSE
+install -m 0700 -d ${PKG}${SYS_DIR[var]}/lib/tor
+install.dir ${PKG}${SYS_DIR[systemdsystemunitdir]}
+install.dat tor.service ${PKG}${SYS_DIR[systemdsystemunitdir]}
+install.cfg torrc ${PKG}${SYS_DIR[etc]}/tor
+install.dir ${PKG}${SYS_DIR[etc]}/{rc,logrotate}.d
+install.bin rc.tor ${PKG}${SYS_DIR[etc]}/rc.d/rc.tor.new
+install.dat tor.logrotate ${PKG}${SYS_DIR[etc]}/logrotate.d/tor.new
+config ${PKG}${SYS_DIR[etc]}/tor/tor{rc,-tsocks.conf}
+rm -rf ${PKG}${SYS_DIR[doc]}/tor
+}
+
+SRCNAME[1]=torsocks
+SRCVERS[1]=2.0.0.$(date +%Y%m%d)
+SRCPACK[1]=git://git.torproject.org/torsocks.git
+SRCCOPY[1]="GPL2"
+
+build1()
+{
+./autogen.sh
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --datadir="${SYS_DIR[doc]}/torsocks"
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+changelog ChangeLog
+config ${PKG}${SYS_DIR[etc]}/tor/torsocks.conf
+rm -rf ${PKG}${SYS_DIR[doc]}/torsocks
+}
diff --git a/network/tor/torsocks-2.0.0.20140506-libpath.patch.xz b/network/tor/torsocks-2.0.0.20140506-libpath.patch.xz
new file mode 100644
index 0000000..06bd69c
Binary files /dev/null and b/network/tor/torsocks-2.0.0.20140506-libpath.patch.xz differ
diff --git a/network/tox/tox.build b/network/tox/tox.build
new file mode 100755
index 0000000..cefc332
--- /dev/null
+++ b/network/tox/tox.build
@@ -0,0 +1,65 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=tox
+VERSION=$(date +%Y%m%d)
+BUILD=1
+DEPENDS=('libsodium >= 0.4.5-1')
+OPTDEPENDS=('libopus >= 1.1-1' 'libvpx >= 1.3.0-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: tox
+${NAME}:
+${NAME}: An instant messaging application that aims to be an easy to use, 
+${NAME}: all-in-one communication platform (including audio, and videochats
+${NAME}: in the future) that ensures their users full privacy and secure
+${NAME}: message delivery.
+${NAME}:
+${NAME}: Homepage: https://github.com/irungentoo/ProjectTox-Core
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=git://github.com/irungentoo/ProjectTox-Core.git
+SRCCOPY[0]="GPL3"
+
+build0()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.am
+autoreconf -i
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --disable-testing \
+ --disable-tests \
+ --disable-ntox
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+}
diff --git a/network/toxic/toxic-20140815-ncurseswlink.patch.xz b/network/toxic/toxic-20140815-ncurseswlink.patch.xz
new file mode 100644
index 0000000..fc81d50
Binary files /dev/null and b/network/toxic/toxic-20140815-ncurseswlink.patch.xz differ
diff --git a/network/toxic/toxic-20140815-nomanz.patch.xz b/network/toxic/toxic-20140815-nomanz.patch.xz
new file mode 100644
index 0000000..04d8b62
Binary files /dev/null and b/network/toxic/toxic-20140815-nomanz.patch.xz differ
diff --git a/network/toxic/toxic.build b/network/toxic/toxic.build
new file mode 100755
index 0000000..77d6982
--- /dev/null
+++ b/network/toxic/toxic.build
@@ -0,0 +1,56 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=toxic
+VERSION=$(date +%Y%m%d)
+BUILD=1
+DEPENDS=('tox >= 20140805-1' 'libconfig >= 1.4.9-1' 'libalut >= 1.1.0-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: toxic
+${NAME}:
+${NAME}: A console client for Tox.
+${NAME}:
+${NAME}: Homepage: https://github.com/Tox/toxic
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=git://github.com/Tox/toxic.git
+SRCCOPY[0]="GPL3"
+
+build0()
+{
+(
+cd build
+make ${JOBS} PREFIX="${SYS_DIR[usr]}" \
+ DATADIR="${SYS_DIR[share]}/application-data/toxic" \
+ MANDIR="${SYS_DIR[man]}" \
+ USER_CFLAGS="${FLAGS}"
+make install PREFIX="${SYS_DIR[usr]}" \
+ DATADIR="${SYS_DIR[share]}/application-data/toxic" \
+ MANDIR="${SYS_DIR[man]}" \
+ DESTDIR="${PKG}"
+)
+}
diff --git a/network/transmission/transmission-2.82-appdatadir.patch.xz b/network/transmission/transmission-2.82-appdatadir.patch.xz
new file mode 100644
index 0000000..66ca166
Binary files /dev/null and b/network/transmission/transmission-2.82-appdatadir.patch.xz differ
diff --git a/network/transmission/transmission.build b/network/transmission/transmission.build
new file mode 100755
index 0000000..3501388
--- /dev/null
+++ b/network/transmission/transmission.build
@@ -0,0 +1,64 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=transmission
+VERSION=2.82
+BUILD=1
+DEPENDS=('gtk+ >= 3.8.0-1' 'libevent >= 2.0.21-1' 'curl >= 7.36.0-1' 'openssl >= 1.0.1g-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: transmission (BitTorrent client)
+${NAME}:
+${NAME}: Transmission is a fast, lean and easy to use BitTorrent client.
+${NAME}:
+${NAME}: Homepage: http://www.transmissionbt.com
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://mirrors.m0k.org/transmission/files/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+
+build0()
+{
+sed -i 's|${datarootdir}/${PACKAGE_NAME}/${subdir}|${datarootdir}/application-data/${PACKAGE_NAME}/${subdir}|g' $(find web -name Makefile.in)
+CPPFLAGS="-I${SYS_DIR[include]}/event" \
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --enable-cli \
+ --enable-daemon
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog NEWS
+}
diff --git a/network/uget/uget.build b/network/uget/uget.build
new file mode 100755
index 0000000..baf99ac
--- /dev/null
+++ b/network/uget/uget.build
@@ -0,0 +1,57 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=uget
+VERSION=1.10.3
+BUILD=1
+DEPENDS=('gtk+ >= 3.6.4-1' 'curl >= 7.29.0-1' 'libnotify >= 0.7.5-1' 'gstreamer >= 1.0.5-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: uget (download manager)
+${NAME}:
+${NAME}: Manage multiple downloads.
+${NAME}:
+${NAME}: Homepage: http://urlget.sf.net
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=${URL[sf]}/${SRCNAME[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="LGPL21"
+
+build0()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}"
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS
+}
diff --git a/network/ulogd/ulogd-20070907-heimdal.patch.bz2 b/network/ulogd/ulogd-20070907-heimdal.patch.bz2
new file mode 100644
index 0000000..52ad082
Binary files /dev/null and b/network/ulogd/ulogd-20070907-heimdal.patch.bz2 differ
diff --git a/network/ulogd/ulogd-20070907-paths.patch.bz2 b/network/ulogd/ulogd-20070907-paths.patch.bz2
new file mode 100644
index 0000000..5fbed62
Binary files /dev/null and b/network/ulogd/ulogd-20070907-paths.patch.bz2 differ
diff --git a/network/ulogd/ulogd.SlackBuild b/network/ulogd/ulogd.SlackBuild
new file mode 100755
index 0000000..4381ba7
--- /dev/null
+++ b/network/ulogd/ulogd.SlackBuild
@@ -0,0 +1,108 @@
+#!/bin/sh
+
+CWD=`pwd`
+NAME=ulogd
+VERSION=20070907
+ARCH=i586
+BUILD=1
+PKGNAME=$NAME
+PKGVER=$VERSION
+BASEDIR=$PKGNAME-$PKGVER
+ARCHIVE=$BASEDIR.tar.bz2
+REPOSITORY=http://www.netfilter.org/projects/ulogd/files
+FLAGS="-O2 -march=pentium -mtune=pentium -fno-strength-reduce \
+ -fomit-frame-pointer -ffast-math"
+PKG=/tmp/package-$NAME
+
+rm -rf $PKG
+mkdir -p $PKG
+
+# Obtain sources
+if [ ! -e $ARCHIVE ]; then
+  if `wget "$REPOSITORY/$ARCHIVE"`; then
+    true
+  else
+    exit 1
+  fi
+fi
+
+# Compile
+cd /tmp
+tar jxvf $CWD/$ARCHIVE
+cd $BASEDIR
+bzcat $CWD/$NAME-$VERSION-heimdal.patch.bz2 | patch -p1 -s
+bzcat $CWD/$NAME-$VERSION-paths.patch.bz2 | patch -p1 -s
+CFLAGS="$FLAGS" CXXFLAGS="$FLAGS" ./configure \
+  --enable-static=no \
+  --enable-shared=yes \
+  --prefix=/usr \
+  --mandir=/usr/man \
+  --sysconfdir=/etc \
+  --libdir=/usr/libexec \
+  --with-pcap=/usr
+make
+
+# Install
+make install DESTDIR=$PKG
+mkdir -p $PKG/install $PKG/usr/doc/$NAME-$VERSION $PKG/etc/rc.d \
+ $PKG/etc/logrotate.d $PKG/var/log/ulogd
+cat > $PKG/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in. You must make
+# exactly 11 lines for the formatting to be correct. It's also customary to
+# leave one space after the ':'.
+
+     |-----handy-ruler------------------------------------------------------|
+ulogd: ulogd (Linux firewall logging daemon)
+ulogd:
+ulogd: Ulogd is a userspace logging daemon for Netfilter/Iptables related
+ulogd: logging. This includes per-packet logging of security violations,
+ulogd: per-packet logging for accounting purpose as well as per-flow
+ulogd: logging.
+ulogd:
+ulogd:
+ulogd:
+ulogd:
+ulogd:
+EOF
+
+cat > $PKG/install/slack-required <<EOF
+netfilter_libs >= 12.0.0-i486-1
+EOF
+
+install -m0644 -g0 -o0 heimdal/doinst.sh $PKG/install
+
+install -m0644 -g0 -o0 AUTHORS README TODO doc/*table* \
+ $PKG/usr/doc/$NAME-$VERSION
+
+install -m0644 -g0 -o0 heimdal/ulogd.conf.new $PKG/etc
+install -m0644 -g0 -o0 heimdal/ulogd.logrotate $PKG/etc/logrotate.d/ulogd
+install -m0644 -g0 -o0 heimdal/rc.ulogd.new $PKG/etc/rc.d
+
+chmod 444 $PKG/usr/man/man?/*.?
+gzip -9nf $PKG/usr/man/man?/*.?
+
+(
+  cd $PKG/usr/libexec/ulogd
+  rm -f *.so *.so.0
+  for lib in `ls *.so.0.0.0`; do
+    prefix=`basename $lib .so.0.0.0`
+    mv $lib $prefix.so
+  done
+)
+
+rm -f $PKG/usr/libexec/*/*.la
+
+strip --strip-unneeded \
+ $PKG/usr/libexec/*/*.so* || :
+
+strip $PKG/usr/sbin/* || :
+
+chown -R root.root $PKG
+
+# Make package
+cd $PKG
+cat install/slack-desc | grep "$NAME:" > /tmp/$NAME-$VERSION-$ARCH-$BUILD.txt
+makepkg -l y -c n /tmp/$NAME-$VERSION-$ARCH-$BUILD.tgz
diff --git a/network/utox/utox-20140815-makefile.patch.xz b/network/utox/utox-20140815-makefile.patch.xz
new file mode 100644
index 0000000..3174e51
Binary files /dev/null and b/network/utox/utox-20140815-makefile.patch.xz differ
diff --git a/network/utox/utox.build b/network/utox/utox.build
new file mode 100755
index 0000000..5899524
--- /dev/null
+++ b/network/utox/utox.build
@@ -0,0 +1,65 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=utox
+VERSION=$(date +%Y%m%d)
+BUILD=1
+DEPENDS=('tox >= 20140805-1' 'xorg_libs >= 7.7-1' 'fontconfig >= 2.11.0-1' 'v4l_utils >= 1.0.1-1' 'dbus >= 1.6.8-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: uTox
+${NAME}:
+${NAME}: A Tox client for X.
+${NAME}:
+${NAME}: Homepage: https://github.com/notsecure/uTox
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=git://github.com/notsecure/uTox
+SRCCOPY[0]="GPL3"
+
+build0()
+{
+make ${JOBS} OPTFLAGS="${FLAGS}"
+make install DESTDIR="${PKG}${SYS_DIR[usr]}"
+doc README.md
+install.dir ${PKG}${SYS_DIR[share]}/applications
+cat > ${PKG}${SYS_DIR[share]}/applications/utox.desktop <<EOF
+Version=1.0
+
+Type=Application
+
+Name=uTox
+Comment=A tox client 
+Comment[de]=Ein tox Client
+Comment[fr]=Un client tox
+
+Categories=Network;InstantMessaging;
+
+Exec=utox
+Terminal=false
+StartupNotify=false
+EOF
+}
diff --git a/network/wavemon/wavemon.build b/network/wavemon/wavemon.build
new file mode 100755
index 0000000..6632a8d
--- /dev/null
+++ b/network/wavemon/wavemon.build
@@ -0,0 +1,57 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=wavemon
+VERSION=0.7.5
+BUILD=2
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: wavemon (wireless monitoring utility)
+${NAME}:
+${NAME}: Wavemon is a text-mode monitoring application for wireless network
+${NAME}: devices originally developed by Jan Morgenstern.
+${NAME}:
+${NAME}: Homepage: http://eden-feed.erg.abdn.ac.uk/wavemon
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://eden-feed.erg.abdn.ac.uk/${SRCNAME[0]}/stable-releases/${SRCNAME[0]}-${SRCVERS[0]}.tar.bz2
+SRCCOPY[0]="GPL3"
+
+build0()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}"
+make ${JOBS} CFLAGS="${FLAGS}"
+make install DESTDIR="${PKG}"
+doc AUTHORS THANKS
+changelog NEWS
+rm -rf ${PKG}${SYS_DIR[share]}/wavemon
+}
diff --git a/network/weechat/weechat-0.4.3-desktop.patch.xz b/network/weechat/weechat-0.4.3-desktop.patch.xz
new file mode 100644
index 0000000..5dd8d5b
Binary files /dev/null and b/network/weechat/weechat-0.4.3-desktop.patch.xz differ
diff --git a/network/weechat/weechat-0.4.3-gcryptcflags.patch.xz b/network/weechat/weechat-0.4.3-gcryptcflags.patch.xz
new file mode 100644
index 0000000..08f4985
Binary files /dev/null and b/network/weechat/weechat-0.4.3-gcryptcflags.patch.xz differ
diff --git a/network/weechat/weechat-0.4.3-libdir.patch.xz b/network/weechat/weechat-0.4.3-libdir.patch.xz
new file mode 100644
index 0000000..8f5f5c0
Binary files /dev/null and b/network/weechat/weechat-0.4.3-libdir.patch.xz differ
diff --git a/network/weechat/weechat-0.4.3-pkgconfig.patch.xz b/network/weechat/weechat-0.4.3-pkgconfig.patch.xz
new file mode 100644
index 0000000..4dedf6e
Binary files /dev/null and b/network/weechat/weechat-0.4.3-pkgconfig.patch.xz differ
diff --git a/network/weechat/weechat.build b/network/weechat/weechat.build
new file mode 100755
index 0000000..8abe23b
--- /dev/null
+++ b/network/weechat/weechat.build
@@ -0,0 +1,62 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=weechat
+VERSION=0.4.3
+BUILD=1
+DEPENDS=('gnutls >= 3.2.12-1' 'curl >= 7.36.0-1')
+OPTDEPENDS=('perl >= 5.18.0-1' 'python >= 2.7.4-1' 'ruby >= 2.0.0.195-1' 'lua >= 5.2.2-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: weechat (Internet Relay Chat client)
+${NAME}:
+${NAME}: A fast, light and extensible console IRC client which is also packed 
+${NAME}: with features. It supports scripting in Perl, Python, Ruby, Lua and
+${NAME}: Tcl.
+${NAME}:
+${NAME}: Homepage: http://www.weechat.org
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://www.weechat.org/files/src/${SRCNAME[0]}-${SRCVERS[0]}.tar.bz2
+SRCCOPY[0]="GPL3"
+
+build0()
+{
+cmake \
+-DCMAKE_C_FLAGS:STRING="${FLAGS} -I${SYS_DIR[include]}/x86_64-linux/ruby-2.0" \
+-DCMAKE_VERBOSE_MAKEFILE:BOOL="on" \
+-DCMAKE_INSTALL_PREFIX:PATH="${SYS_DIR[usr]}" \
+-DLIBDIR:PATH="${SYS_DIR[lib]}" \
+-DMANDIR:PATH="${SYS_DIR[man]}" \
+-DPKGCONFIGDIR:PATH="${SYS_DIR[share]}/pkgconfig" \
+-DPLUGINDIR:PATH="${SYS_DIR[lib]}/plugins/weechat" \
+-DWEECHAT_HOME:STRING="~/.config/weechat" \
+CMakeLists.txt
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS NEWS
+changelog ChangeLog 
+install.dir ${PKG}${SYS_DIR[share]}/applications
+install.dat weechat.desktop ${PKG}${SYS_DIR[share]}/applications
+}
diff --git a/network/weex/weex.SlackBuild b/network/weex/weex.SlackBuild
new file mode 100755
index 0000000..69f1407
--- /dev/null
+++ b/network/weex/weex.SlackBuild
@@ -0,0 +1,78 @@
+#!/bin/sh
+
+CWD=`pwd`
+NAME=weex
+VERSION=2.6.1.5
+ARCH=i586
+BUILD=1
+PKGNAME=$NAME
+PKGVER=$VERSION
+BASEDIR=$PKGNAME-$PKGVER
+ARCHIVE=$BASEDIR.tar.gz
+REPOSITORY=http://www.enjoy.ne.jp/~gm
+FLAGS="-O2 -march=pentium -mcpu=pentium -fno-strength-reduce \
+ -fomit-frame-pointer -ffast-math"
+PKG=/tmp/package-$NAME
+
+rm -rf $PKG
+mkdir -p $PKG
+
+# Obtain sources
+if [ ! -e $ARCHIVE ]; then
+  if `wget "$REPOSITORY/$ARCHIVE"`; then
+    true
+  else
+    exit 1
+  fi
+fi
+
+# Compile
+cd /tmp
+tar zxvf $CWD/$ARCHIVE
+cd $BASEDIR
+CFLAGS=$FLAGS CXXFLAGS=$FLAGS ./configure --prefix=/usr
+make
+
+# Install
+make install prefix=$PKG/usr
+mkdir -p $PKG/install $PKG/usr/doc/$NAME-$VERSION
+cat > $PKG/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in. You must make
+# exactly 11 lines for the formatting to be correct. It's also customary to
+# leave one space after the ':'.
+
+    |-----handy-ruler------------------------------------------------------|
+weex: Weex (fast WEbpage EXchanger)
+weex:
+weex: Weex is a utility that automates the task of remotely maintaining a
+weex: Web page or an FTP archive.
+weex:
+weex:
+weex:
+weex:
+weex:
+weex:
+weex:
+EOF
+
+(
+  cd doc
+  install -m644 -g0 -o0 AUTHORS BUGS* ChangeLog* FAQ* README* THANKS TODO \
+   sample.weex $PKG/usr/doc/$NAME-$VERSION
+)
+
+chmod 444 $PKG/usr/man/man?/*.?
+gzip -9nf $PKG/usr/man/man?/*.?
+
+strip $PKG/usr/bin/* ||:
+
+chown -R root.root $PKG
+chgrp bin $PKG/usr/bin $PKG/usr/bin/*
+
+# Make package
+cd $PKG
+cat install/slack-desc | grep "$NAME:" > /tmp/$NAME-$VERSION-$ARCH-$BUILD.txt
+makepkg -l y -c n /tmp/$NAME-$VERSION-$ARCH-$BUILD.tgz
diff --git a/network/wget/wget-1.14-slackware.patch.xz b/network/wget/wget-1.14-slackware.patch.xz
new file mode 100644
index 0000000..9255cce
Binary files /dev/null and b/network/wget/wget-1.14-slackware.patch.xz differ
diff --git a/network/wget/wget.build b/network/wget/wget.build
new file mode 100755
index 0000000..ba0f543
--- /dev/null
+++ b/network/wget/wget.build
@@ -0,0 +1,72 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=wget
+VERSION=1.14
+BUILD=1
+DEPENDS=('gnutls >= 3.1.6-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: wget (a non-interactive network retriever)
+${NAME}:
+${NAME}: GNU Wget is a free network utility to retrieve files from the
+${NAME}: World Wide Web using HTTP and FTP, the two most widely used Internet
+${NAME}: protocols. It works non-interactively, thus enabling work in the
+${NAME}: background after having logged off.
+${NAME}:
+${NAME}: The author of Wget is Hrvoje Niksic <hniksic@srce.hr>.
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+# Install the texinfo files
+if [ -x /usr/bin/install-info ]; then
+  /usr/bin/install-info --info-dir=${SYS_DIR[info]} ${SYS_DIR[info]}/wget.info.gz 2> /dev/null
+fi
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=${URL[gnu]}/${SRCNAME[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+SRCCOPY[0]="GPL3"
+
+build0()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-rpath \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --infodir="${SYS_DIR[info]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-ssl=gnutls
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog NEWS
+install.dat doinst.sh ${PKG}/install
+mv \
+ ${PKG}/etc/wgetrc \
+ ${PKG}/etc/wgetrc.new
+}
diff --git a/network/wireshark/wireshark-1.10.0-podfix.patch.xz b/network/wireshark/wireshark-1.10.0-podfix.patch.xz
new file mode 100644
index 0000000..9c67136
Binary files /dev/null and b/network/wireshark/wireshark-1.10.0-podfix.patch.xz differ
diff --git a/network/wireshark/wireshark.build b/network/wireshark/wireshark.build
new file mode 100755
index 0000000..ae4c751
--- /dev/null
+++ b/network/wireshark/wireshark.build
@@ -0,0 +1,94 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=wireshark
+VERSION=1.10.0
+BUILD=1
+DEPENDS=('glib >= 2.36.0-1' 'tcpip >= 20130209-1' 'gnutls >= 3.2.1-1' 'geoip >= 1.4.6')
+OPTDEPENDS=('gtk+ >= 3.8.0-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: wireshark (network protocol analyzer)
+${NAME}:
+${NAME}: Wireshark is the world's foremost network protocol analyzer, and is
+${NAME}: the standard in many industries.
+${NAME}:
+${NAME}: It is the continuation of a project that started in 1998. Hundreds of
+${NAME}: developers around the world have contributed to it, and it is still
+${NAME}: under active development.
+${NAME}:
+${NAME}: Homepage: http://www.wireshark.org
+${NAME}:
+EOF
+
+cat > ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+if [ -x ${SYS_DIR[bin]}/update-desktop-database ]; then
+  ${SYS_DIR[bin]}/update-desktop-database -q
+fi
+
+if [ -x ${SYS_DIR[bin]}/gtk-update-icon-cache ]; then
+  ${SYS_DIR[bin]}/gtk-update-icon-cache -q -t -f ${SYS_DIR[share]}/icons/hicolor
+fi
+
+if [ -x ${SYS_DIR[sbin]}/setcap ]; then
+  ${SYS_DIR[sbin]}/setcap 'CAP_NET_RAW+eip CAP_NET_ADMIN+eip' usr/bin/dumpcap
+fi
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://www.wireshark.org/download/src/${SRCNAME[0]}-${SRCVERS[0]}.tar.bz2
+SRCCOPY[0]="GPL2 BSD3"
+
+build0()
+{
+CPPFLAGS="-I${SYS_DIR[include]}/gcrypt -I${SYS_DIR[include]}/gpg-error" \
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --datadir="${SYS_DIR[share]}/application-data" \
+ --with-plugins="${SYS_DIR[lib]}/plugins/wireshark" \
+ --enable-setcap-install \
+ --with-gtk3=yes \
+ --with-dumpcap-group=netdev \
+ --with-gnutls=yes \
+ --with-gcrypt=yes \
+ --with-ssl \
+ --with-pcap-remote
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog NEWS
+install.dir ${PKG}${SYS_DIR[share]}/applications
+install.dat wireshark.desktop ${PKG}${SYS_DIR[share]}/applications
+install.dir ${PKG}${SYS_DIR[share]}/icons/hicolor/{16x16,32x32,48x48}/apps
+install.dat image/hi16-app-wireshark.png ${PKG}${SYS_DIR[share]}/icons/hicolor/16x16/apps/wireshark.png
+install.dat image/hi32-app-wireshark.png ${PKG}${SYS_DIR[share]}/icons/hicolor/32x32/apps/wireshark.png
+install.dat image/hi48-app-wireshark.png ${PKG}${SYS_DIR[share]}/icons/hicolor/48x48/apps/wireshark.png
+}
-- 
cgit v1.2.3-70-g09d2