#!/bin/bash
#
# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>

source /usr/src/ports/Build/build.sh

NAME=bluetooth
VERSION=4.101
BUILD=3
DEPENDS=('glib >= 2.36.0-1' 'dbus >= 1.6.8-1')
OPTDEPENDS=('libical >= 1.0-1')

# Description

cat > ${PKG}/install/slack-desc <<EOF
# HOW TO EDIT THIS FILE:
# The "handy ruler" below makes it easier to edit a package description.  Line
# up the first '|' above the ':' following the base package name, and the '|'
# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct.  It's also
# customary to leave one space after the ':'.

$(padd)|-----handy-ruler------------------------------------------------------|
${NAME}: bluetooth
${NAME}:
${NAME}: A wireless standard for exchanging data over short distances.
${NAME}:
${NAME}: This package provides the libraries and utilities and other support
${NAME}: files to use bluetooth adapters and devices.
${NAME}:
${NAME}: Homepage: http://www.bluez.org
${NAME}:
${NAME}:
${NAME}:
EOF

cat >> ${PKG}/install/doinst.sh <<EOF
#!/bin/sh

config() {
  NEW="\$1"
  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
  # If there's no config file by that name, mv it over:
  if [ ! -r \$OLD ]; then
    mv \$NEW \$OLD
  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
    # toss the redundant copy
    rm \$NEW
  fi
  # Otherwise, we leave the .new copy for the admin to consider...
}

# Keep same perms on rc.bluetooth.new:
if [ -e etc/rc.d/rc.bluetooth ]; then
  cp -a etc/rc.d/rc.bluetooth etc/rc.d/rc.bluetooth.new.incoming
  cat etc/rc.d/rc.bluetooth.new > etc/rc.d/rc.bluetooth.new.incoming
  mv etc/rc.d/rc.bluetooth.new.incoming etc/rc.d/rc.bluetooth.new
fi

config etc/rc.d/rc.bluetooth.new
config etc/bluetooth/audio.conf.new
config etc/bluetooth/input.conf.new
config etc/bluetooth/main.conf.new
config etc/bluetooth/network.conf.new
config etc/bluetooth/serial.conf.new
config etc/bluetooth/rfcomm.conf.new
config etc/modprobe.d/bluetooth.conf.new
EOF

# Sources

SRCNAME[0]=bluez
SRCVERS[0]=${VERSION}
SRCPACK[0]=http://www.kernel.org/pub/linux/bluetooth/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
SRCCOPY[0]="GPL2 LGPL21"

build0()
{
sed -i 's|$(libdir)/alsa-lib|$(libdir)/plugins/alsa-1|g' Makefile.in
sed -i 's|$(libdir)/cups/backend|$(libdir)/exec/cups/backend|g' Makefile.in
sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.in
sed -i 's|$(libdir)/bluetooth/plugins|$(libdir)/plugins/bluetooth|g' Makefile.{in,am}
sed -i 's|${libdir}/bluetooth/plugins|${libdir}/plugins/bluetooth|g' configure acinclude.m4
sed -i 's|udevdir = @UDEV_DIR@|udevdir = $(libdir)/exec/udev|g' Makefile.in
sed -i 's|rulesdir = @UDEV_DIR@/rules.d|rulesdir = $(datadir)/udev/rules|g' Makefile.in
CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
./configure \
 --build="${ARCH}-slackware-linux" \
 --disable-dependency-tracking \
 --disable-silent-rules \
 --enable-shared=yes \
 --enable-static=no \
 --prefix="${SYS_DIR[usr]}" \
 --mandir="${SYS_DIR[man]}" \
 --sysconfdir="${SYS_DIR[etc]}" \
 --libdir="${SYS_DIR[lib]}" \
 --localstatedir="${SYS_DIR[var]}" \
 --with-systemdunitdir="${SYS_DIR[systemdsystemunitdir]}" \
 --enable-alsa \
 --enable-usb \
 --enable-pnat \
 --enable-tools \
 --enable-bccmd \
 --enable-hid2hci \
 --enable-dfutool \
 --enable-hidd \
 --enable-pand \
 --enable-dund \
 --enable-cups \
 --enable-service \
 --enable-datafiles
make ${JOBS}
make install DESTDIR="${PKG}"
doc AUTHORS
changelog ChangeLog
install.dir ${PKG}${SYS_DIR[udevrules]}
install.dir ${PKG}${SYS_DIR[udevscripts]}
install.bin bluetooth.sh ${PKG}${SYS_DIR[udevscripts]}/bluetooth
install.bin scripts/bluetooth_serial ${PKG}${SYS_DIR[udevscripts]}
#FIXME: this will have to go when systemd arrives
install.dat 97-bluetooth.rules ${PKG}${SYS_DIR[udevrules]}
install.dir ${PKG}${SYS_DIR[etc]}/{rc.d,modprobe.d,bluetooth}
install.cfg bluetooth.modprobe ${PKG}${SYS_DIR[etc]}/modprobe.d/bluetooth.conf.new
install.cfg rc.bluetooth ${PKG}${SYS_DIR[etc]}/rc.d/rc.bluetooth.new
install.cfg audio/audio.conf \
 ${PKG}${SYS_DIR[etc]}/bluetooth/audio.conf.new
install.cfg input/input.conf \
 ${PKG}${SYS_DIR[etc]}/bluetooth/input.conf.new
install.cfg network/network.conf \
 ${PKG}${SYS_DIR[etc]}/bluetooth/network.conf.new
install.cfg serial/serial.conf \
 ${PKG}${SYS_DIR[etc]}/bluetooth/serial.conf.new
config ${PKG}${SYS_DIR[etc]}/bluetooth/main.conf
config ${PKG}${SYS_DIR[etc]}/bluetooth/rfcomm.conf
rm -rf ${PKG}${SYS_DIR[lib]}/bluetooth
# Remove this directory if there's no plugin in it
rmdir ${PKG}${SYS_DIR[lib]}/plugins/bluetooth
}

SRCNAME[1]=obexd
SRCVERS[1]=0.48
SRCPACK[1]=http://www.kernel.org/pub/linux/bluetooth/${SRCNAME[1]}-${SRCVERS[1]}.tar.gz
SRCCOPY[1]="GPL2"

build1()
{
sed -i 's|${libdir}/obex/plugins|${libdir}/plugins/obex|g' configure
BLUEZ_CFLAGS="-I${PKG}${SYS_DIR[include]}" \
BLUEZ_LIBS="-L${PKG}${SYS_DIR[lib]} -lbluetooth" \
CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
./configure \
 --build="${ARCH}-slackware-linux" \
 --disable-dependency-tracking \
 --disable-silent-rules \
 --enable-static=no \
 --enable-shared=yes \
 --prefix="${SYS_DIR[usr]}" \
 --mandir="${SYS_DIR[man]}" \
 --sysconfdir="${SYS_DIR[etc]}" \
 --libdir="${SYS_DIR[lib]}" \
 --localstatedir="${SYS_DIR[var]}" \
 --libexecdir="${SYS_DIR[lib]}/exec" \
 --enable-usb \
 --enable-pcsuite
make ${JOBS} V=1
make install DESTDIR="${PKG}"
doc AUTHORS
changelog ChangeLog
# Remove this directory if there's no plugin in it
rmdir ${PKG}${SYS_DIR[lib]}/plugins/obex
}