#!/bin/bash
#
# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>

source /usr/src/ports/Build/build.sh

NAME=power
VERSION=0.9.19
BUILD=2
DEPENDS=('glib >= 2.34.3-1' 'dbus_glib >= 0.100.2-1' 'udev >= 173-1' 'polkit >= 0.105-1' 'usb >= 1.0.14-1')

# Description

cat > ${PKG}/install/slack-desc <<EOF
# HOW TO EDIT THIS FILE:
# The "handy ruler" below makes it easier to edit a package description.  Line
# up the first '|' above the ':' following the base package name, and the '|'
# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct.  It's also
# customary to leave one space after the ':'.

$(padd)|-----handy-ruler------------------------------------------------------|
${NAME}: upower
${NAME}:
${NAME}: An abstraction for enumerating power devices, listening to device
${NAME}: events and querying history and statistics. Any application or
${NAME}: service on the system can access the org.freedesktop.UPower service
${NAME}: via the system message bus. Some operations (such as suspending the
${NAME}: system) are restricted using polkit. UPower is also useful to control
${NAME}: the latency of different operations on your computer, which enables
${NAME}: you to save significant amounts of power.
${NAME}:
${NAME}: Homepage: http://upower.freedesktop.org
EOF

cat >> ${PKG}/install/doinst.sh <<EOF
#!/bin/sh

config() {
  NEW="\$1"
  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
  # If there's no config file by that name, mv it over:
  if [ ! -r \$OLD ]; then
    mv \$NEW \$OLD
  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
    # toss the redundant copy
    rm \$NEW
  fi
  # Otherwise, we leave the .new copy for the admin to consider...
}

config etc/UPower/UPower.conf.new
EOF

# Sources

SRCNAME[0]=upower
SRCVERS[0]=${VERSION}
SRCPACK[0]=http://upower.freedesktop.org/releases/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
SRCCOPY[0]="GPL2"

build0()
{
sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.in
sed -i 's|$(slashlibdir)/udev/rules.d|$(datarootdir)/udev/rules|g' rules/Makefile.in
CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
./configure \
 --build="${ARCH}-slackware-linux" \
 --disable-dependency-tracking \
 --disable-silent-rules \
 --disable-rpath \
 --enable-static=no \
 --enable-shared=yes \
 --enable-introspection=no \
 --enable-man-pages=no \
 --prefix="${SYS_DIR[usr]}" \
 --mandir="${SYS_DIR[man]}" \
 --sysconfdir="${SYS_DIR[etc]}" \
 --libdir="${SYS_DIR[lib]}" \
 --libexecdir="${SYS_DIR[lib]}/exec" \
 --localstatedir="${SYS_DIR[var]}" \
 --with-html-dir="${SYS_DIR[html]}" \
 --with-systemdsystemunitdir="${SYS_DIR[systemdsystemunitdir]}" \
 --with-backend=linux
#FIXME: systemd
make ${JOBS} V=1
make install DESTDIR="${PKG}"
doc AUTHORS
changelog NEWS
config ${PKG}${SYS_DIR[etc]}/UPower/UPower.conf
}

SRCNAME[1]=cpufrequtils
SRCVERS[1]=008
SRCPACK[1]=http://www.kernel.org/pub/linux/utils/kernel/cpufreq/${SRCNAME[1]}-${SRCVERS[1]}.tar.bz2
SRCCOPY[1]="GPL2"

build1()
{
make ${JOBS} \
 V="true" \
 PROC="false" \
 OPTIMIZATION="${FLAGS}"
make install DESTDIR="${PKG}" libdir="${SYS_DIR[lib]}"
doc AUTHORS
rm -f ${PKG}${SYS_DIR[lib]}/*.a
}

SRCNAME[2]=pm-utils
SRCVERS[2]=1.4.1
SRCPACK[2]=http://pm-utils.freedesktop.org/releases/${SRCNAME[2]}-${SRCVERS[2]}.tar.gz
SRCCOPY[2]="GPL2"

PMUTILSLIBDIR=${SYS_DIR[share]}/pm-utils

build2()
{
sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.in
CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
./configure \
 --build="${ARCH}-slackware-linux" \
 --disable-dependency-tracking \
 --prefix="${SYS_DIR[usr]}" \
 --mandir="${SYS_DIR[man]}" \
 --sysconfdir="${SYS_DIR[etc]}" \
 --libdir="${SYS_DIR[share]}" \
 --localstatedir="${SYS_DIR[var]}" \
 --docdir="${SYS_DIR[doc]}/${SRCNAME[2]}-${SRCVERS[2]}"
make ${JOBS}
make install DESTDIR="${PKG}"
doc AUTHORS README.SLACKWARE
changelog ChangeLog
rm -f ${PKG}${PMUTILSLIBDIR}/{sleep.d/55NetworkManager,power.d/{harddrive,disable_wol,hal-cd-polling}}
}

SRCNAME[3]=pm-quirks
SRCVERS[3]=20100619
SRCPACK[3]=http://pm-utils.freedesktop.org/releases/${SRCNAME[3]}-${SRCVERS[3]}.tar.gz
SRCROOT[3]=video-quirks

build3()
{
install.dir ${PKG}${PMUTILSLIBDIR}/video-quirks
install.dat *.quirkdb ${PKG}${PMUTILSLIBDIR}/video-quirks
}