Add ports.

328 files changed, 8084 insertions, 0 deletions

diff --git a/base/audit/audit-2.2.3-logdir.patch.xz b/base/audit/audit-2.2.3-logdir.patch.xz
new file mode 100644
index 0000000..8bdab8f
--- /dev/null
+++ b/base/audit/audit-2.2.3-logdir.patch.xz
diff --git a/base/audit/audit-2.2.3-sysvinit.patch.xz b/base/audit/audit-2.2.3-sysvinit.patch.xz
new file mode 100644
index 0000000..a84239d
--- /dev/null
+++ b/base/audit/audit-2.2.3-sysvinit.patch.xz
diff --git a/base/audit/audit.build b/base/audit/audit.build
new file mode 100755
index 0000000..2ab9e24
--- /dev/null
+++ b/base/audit/audit.build
@@ -0,0 +1,115 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=audit
+VERSION=2.2.3
+BUILD=1
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: audit
+${NAME}:
+${NAME}: User space utilities for storing and searching the audit records
+${NAME}: generated by the audit subsystem in the Linux 2.6 kernel.
+${NAME}:
+${NAME}: Homepage: http://people.redhat.com/sgrubb/audit
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/libaudit.conf.new
+config etc/audit/auditd.conf.new
+config etc/audit/audit.rules.new
+config etc/audisp/audisp-remote.conf.new
+config etc/audisp/audispd.conf.new
+#config etc/audisp/zos-remote.conf.new
+config etc/rc.d/rc.auditd.new
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://people.redhat.com/sgrubb/${SRCNAME[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+sed -i 's|/usr/lib/systemd/system|/usr/share/systemd/system|g' init.d/Makefile.in
+sed -i 's|SUBDIRS = builtins zos-remote remote|SUBDIRS = builtins remote|g' audisp/plugins/Makefile.in
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --without-python \
+ --with-libcap-ng=auto \
+ --with-libwrap="${SYS_DIR[usr]}" \
+ --enable-systemd
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS THANKS
+changelog ChangeLog
+install.dir ${PKG}${SYS_DIR[etc]}/rc.d
+install.cfg rc.auditd ${PKG}${SYS_DIR[etc]}/rc.d/rc.auditd.new
+mv \
+ ${PKG}${SYS_DIR[etc]}/libaudit.conf \
+ ${PKG}${SYS_DIR[etc]}/libaudit.conf.new
+mv \
+ ${PKG}${SYS_DIR[etc]}/audit/auditd.conf \
+ ${PKG}${SYS_DIR[etc]}/audit/auditd.conf.new
+mv \
+ ${PKG}${SYS_DIR[etc]}/audit/audit.rules \
+ ${PKG}${SYS_DIR[etc]}/audit/audit.rules.new
+mv \
+ ${PKG}${SYS_DIR[etc]}/audisp/audisp-remote.conf \
+ ${PKG}${SYS_DIR[etc]}/audisp/audisp-remote.conf.new
+mv \
+ ${PKG}${SYS_DIR[etc]}/audisp/audispd.conf \
+ ${PKG}${SYS_DIR[etc]}/audisp/audispd.conf.new
+#mv \
+# ${PKG}${SYS_DIR[etc]}/audisp/zos-remote.conf \
+# ${PKG}${SYS_DIR[etc]}/audisp/zos-remote.conf.new
+rm -rf \
+ ${PKG}${SYS_DIR[etc]}/rc.d/init.d \
+ ${PKG}${SYS_DIR[etc]}/sysconfig \
+ ${PKG}${SYS_DIR[man]}/man?/*zos-remote* \
+ ${PKG}${SYS_DIR[lib]}/python*/site-packages/audit.py?
+}
diff --git a/base/avahi/avahi-0.6.31-config.patch.xz b/base/avahi/avahi-0.6.31-config.patch.xz
new file mode 100644
index 0000000..5439b15
--- /dev/null
+++ b/base/avahi/avahi-0.6.31-config.patch.xz
diff --git a/base/avahi/avahi-0.6.31-desktopfiles.patch.xz b/base/avahi/avahi-0.6.31-desktopfiles.patch.xz
new file mode 100644
index 0000000..cff9576
--- /dev/null
+++ b/base/avahi/avahi-0.6.31-desktopfiles.patch.xz
diff --git a/base/avahi/avahi-0.6.31-rundir.patch.xz b/base/avahi/avahi-0.6.31-rundir.patch.xz
new file mode 100644
index 0000000..bf848eb
--- /dev/null
+++ b/base/avahi/avahi-0.6.31-rundir.patch.xz
diff --git a/base/avahi/avahi-0.6.31-systembussocket.patch.xz b/base/avahi/avahi-0.6.31-systembussocket.patch.xz
new file mode 100644
index 0000000..7458278
--- /dev/null
+++ b/base/avahi/avahi-0.6.31-systembussocket.patch.xz
diff --git a/base/avahi/avahi.build b/base/avahi/avahi.build
new file mode 100755
index 0000000..4ce55b7
--- /dev/null
+++ b/base/avahi/avahi.build
@@ -0,0 +1,186 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=avahi
+VERSION=0.6.31
+BUILD=2
+DEPENDS=('libdaemon >= 0.14-1' 'expat >= 2.1.0-1' 'gdbm >= 1.10-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: avahi
+${NAME}:
+${NAME}: A free Zeroconf implementation, including a system for multicast
+${NAME}: DNS/DNS-SD service discovery. It allows programs to publish and
+${NAME}: discover services and hosts running on a local network with no
+${NAME}: specific configuration. For example, a user can plug their computer
+${NAME}: into a network and Avahi automatically finds printers to print to,
+${NAME}: files to look at and people to talk to, as well as advertising the
+${NAME}: network services running on the machine.
+${NAME}:
+${NAME}: Homepage: http://avahi.org
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/rc.d/rc.avahidaemon.new
+config etc/rc.d/rc.avahidnsconfd.new
+config etc/avahi/avahi-daemon.conf.new
+config etc/mdns.allow.new
+
+# If the avahi users/groups don't exist add them
+
+if grep "^avahi:x:" etc/passwd 1> /dev/null 2> /dev/null ; then
+  true
+else
+  echo "avahi:x:61:61:avahi:/:/bin/false" >> etc/passwd
+fi
+if grep "^avahi::" etc/group 1> /dev/null 2> /dev/null ; then
+  true
+else
+  echo "avahi::61:avahi" >> etc/group
+fi
+if grep "^avahi:" etc/shadow 1> /dev/null 2> /dev/null ; then
+  true
+else
+  echo "avahi:*:9797:0:::::" >> etc/shadow
+fi
+
+if grep "^autoipd:x:" etc/passwd 1> /dev/null 2> /dev/null ; then
+  true
+else
+  echo "autoipd:x:62:62:autoipd:/:/bin/false" >> etc/passwd
+fi
+if grep "^autoipd::" etc/group 1> /dev/null 2> /dev/null ; then
+  true
+else
+  echo "autoipd::62:autoipd" >> etc/group
+fi
+if grep "^autoipd:" etc/shadow 1> /dev/null 2> /dev/null ; then
+  true
+else
+  echo "autoipd:*:9797:0:::::" >> etc/shadow
+fi
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://avahi.org/download/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="LGPL21"
+
+build0()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.{am,in}
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --enable-static=no \
+ --enable-shared=yes \
+ --enable-introspection=no \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --disable-qt3 \
+ --disable-qt4 \
+ --disable-python \
+ --disable-python-dbus \
+ --disable-pygtk \
+ --disable-mono \
+ --disable-monodoc \
+ --with-distro=slackware \
+ --with-systemdsystemunitdir="${SYS_DIR[systemdsystemunitdir]}" \
+ --with-xml=expat \
+ --with-avahi-user=avahi \
+ --with-avahi-group=avahi \
+ --with-autoipd-user=autoipd \
+ --with-autoipd-group=autoipd \
+ --with-avahi-priv-access-group=netdev
+make ${JOBS}
+make install DESTDIR="${PKG}"
+install.cfg mdns.allow.new ${PKG}${SYS_DIR[etc]}
+for manpage in \
+ avahi-browse-domains avahi-publish-address avahi-publish-service \
+ avahi-resolve-address avahi-resolve-host-name bvnc; do
+ rm -f ${PKG}${SYS_DIR[man]}/man?/${manpage}.?
+done
+(
+  cd ${PKG}${SYS_DIR[man]}/man1
+  echo ".so man/man1/avahi-browse.1" > avahi-browse-domains.1
+  echo ".so man/man1/avahi-publish.1" > avahi-publish-address.1
+  echo ".so man/man1/avahi-publish.1" > avahi-publish-service.1
+  echo ".so man/man1/avahi-resolve.1" > avahi-resolve-address.1
+  echo ".so man/man1/avahi-resolve.1" > avahi-resolve-host-name.1
+  echo ".so man/man1/bssh.1" > bvnc.1
+)
+config ${PKG}${SYS_DIR[etc]}/rc.d/rc.avahidaemon
+config ${PKG}${SYS_DIR[etc]}/rc.d/rc.avahidnsconfd
+config ${PKG}${SYS_DIR[etc]}/avahi/avahi-daemon.conf
+rm -rf \
+ ${PKG}${SYS_DIR[var]} \
+ ${PKG}${SYS_DIR[lib]}/avahi
+}
+
+SRCNAME[1]=nss-mdns
+SRCVERS[1]=0.10
+SRCPACK[1]=http://0pointer.de/lennart/projects/${SRCNAME[1]}/${SRCNAME[1]}-${SRCVERS[1]}.tar.gz
+SRCCOPY[1]="LGPL21"
+
+build1()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --disable-lynx \
+ --enable-avahi
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+doc README
+#FIXME: compat
+(
+  install.dir ${PKG}/lib64
+  cd ${PKG}/lib64
+  for link in libnss_mdns{4,6,,_minimal,{4,6}_minimal}.so.2; do
+    ln -sf ${SYS_DIR[lib]}/${link}
+  done
+)
+}
diff --git a/base/bash/bash-4.2-man.patch.xz b/base/bash/bash-4.2-man.patch.xz
new file mode 100644
index 0000000..7171ecb
--- /dev/null
+++ b/base/bash/bash-4.2-man.patch.xz
diff --git a/base/bash/bash-4.2-paths.patch.xz b/base/bash/bash-4.2-paths.patch.xz
new file mode 100644
index 0000000..7d0b01d
--- /dev/null
+++ b/base/bash/bash-4.2-paths.patch.xz
diff --git a/base/bash/bash-4.2-pgrpsync.patch.xz b/base/bash/bash-4.2-pgrpsync.patch.xz
new file mode 100644
index 0000000..869cbed
--- /dev/null
+++ b/base/bash/bash-4.2-pgrpsync.patch.xz
diff --git a/base/bash/bash-4.2-readlineoom.patch.xz b/base/bash/bash-4.2-readlineoom.patch.xz
new file mode 100644
index 0000000..8e58b9d
--- /dev/null
+++ b/base/bash/bash-4.2-readlineoom.patch.xz
diff --git a/base/bash/bash-4.2-security.patch.xz b/base/bash/bash-4.2-security.patch.xz
new file mode 100644
index 0000000..3b38b1b
--- /dev/null
+++ b/base/bash/bash-4.2-security.patch.xz
diff --git a/base/bash/bash-4.2-update045.patch.xz b/base/bash/bash-4.2-update045.patch.xz
new file mode 100644
index 0000000..44ca452
--- /dev/null
+++ b/base/bash/bash-4.2-update045.patch.xz
diff --git a/base/bash/bash.build b/base/bash/bash.build
new file mode 100755
index 0000000..28d4a75
--- /dev/null
+++ b/base/bash/bash.build
@@ -0,0 +1,114 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=bash
+MAJOR=4.2
+VERSION=${MAJOR}.45
+BUILD=1
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: bash (sh-compatible shell)
+${NAME}:
+${NAME}: The GNU Bourne-Again SHell. Bash is a sh-compatible command
+${NAME}: interpreter that executes commands read from the standard input or
+${NAME}: from a file. Bash also incorporates useful features from the Korn
+${NAME}: and C shells (ksh and csh). Bash is ultimately intended to be a
+${NAME}: conformant implementation of the IEEE Posix Shell and Tools
+${NAME}: specification (IEEE Working Group 1003.2).
+${NAME}:
+${NAME}: Bash must be present for the system to boot properly.
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+# Install texinfo files
+
+install_info()
+{
+  for file in "\${*}"; do
+    if [ -x usr/bin/install-info ]; then
+      usr/bin/install-info --info-dir=usr/share/info usr/share/info/\${file}.info.xz 2> /dev/null
+    fi
+  done
+}
+
+install_info bash
+
+if [ -r usr/bin/bash ]; then
+  mv usr/bin/bash usr/bin/bash.old
+fi
+
+mv usr/bin/bash4.new usr/bin/bash
+
+if [ -f usr/bin/bash.old ]; then
+  rm -f usr/bin/bash.old
+fi
+
+if [ ! -r etc/shells ]; then
+  touch etc/shells
+  chmod 0644 etc/shells
+fi
+
+if fgrep "/usr/bin/bash" etc/shells 1> /dev/null 2> /dev/null ; then
+  true
+else
+  echo "/usr/bin/bash" >> etc/shells
+fi
+
+if fgrep "/usr/bin/rbash" etc/shells 1> /dev/null 2> /dev/null ; then
+  true
+else
+  echo "/usr/bin/rbash" >> etc/shells
+fi
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${MAJOR}
+SRCPACK[0]=ftp://ftp.gnu.org/gnu/bash/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="GPL3"
+
+build0()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --infodir="${SYS_DIR[info]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --bindir="${SYS_DIR[bin]}" \
+ --with-curses
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS COMPAT
+changelog NEWS
+install.man doc/*.1 ${PKG}${SYS_DIR[man]}/man1
+mv ${PKG}${SYS_DIR[bin]}/bash ${PKG}${SYS_DIR[bin]}/bash4.new
+rm -f \
+ ${PKG}${SYS_DIR[bin]}/bashbug \
+ ${PKG}${SYS_DIR[man]}/man1/bashbug.1
+#FIXME: compat
+(
+  cd ${PKG}${SYS_DIR[bin]}
+  ln -sf bash rbash
+  ln -sf bash sh
+)
+}
diff --git a/base/bin/adjtimex-1.29-install.patch.xz b/base/bin/adjtimex-1.29-install.patch.xz
new file mode 100644
index 0000000..8645c20
--- /dev/null
+++ b/base/bin/adjtimex-1.29-install.patch.xz
diff --git a/base/bin/bin.build b/base/bin/bin.build
new file mode 100755
index 0000000..295ff46
--- /dev/null
+++ b/base/bin/bin.build
@@ -0,0 +1,836 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=bin
+VERSION=$(date +%Y%m%d)
+BUILD=2
+DEPENDS=('udev >= 173-1' 'pam >= 1.1.6-1')
+OPTDEPENDS=('libxml >= 2.9.0-2' 'xz >= 5.0.4-1' 'bzip2 >= 1.0.6-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: bin (a huge collection of essential utilities)
+${NAME}:
+${NAME}: The bin package is a huge collection of random utilities that
+${NAME}: are essential to run a Linux system.
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+install_info()
+{
+  for file in "\${*}"; do
+    if [ -x usr/bin/install-info ]; then
+      usr/bin/install-info --info-dir=usr/share/info usr/share/info/\${file}.info.xz 2> /dev/null
+    fi
+  done
+}
+
+# Keep same perms on rc.serial.new:
+
+if [ -e etc/rc.d/rc.serial ]; then
+  cp -a etc/rc.d/rc.serial etc/rc.d/rc.serial.new.incoming
+  cat etc/rc.d/rc.serial.new > etc/rc.d/rc.serial.new.incoming
+  mv etc/rc.d/rc.serial.new.incoming etc/rc.d/rc.serial.new
+fi
+
+config etc/rc.d/rc.serial.new
+config etc/serial.conf.new
+config etc/conf.d/dircolors.conf.new
+config etc/login.defs.new
+config etc/default/useradd.new
+config etc/pam.d/chage.new
+config etc/pam.d/chfn.new
+config etc/pam.d/chgpasswd.new
+config etc/pam.d/chpasswd.new
+config etc/pam.d/chsh.new
+config etc/pam.d/groupadd.new
+config etc/pam.d/groupdel.new
+config etc/pam.d/groupmems.new
+config etc/pam.d/groupmod.new
+config etc/pam.d/login.new
+config etc/pam.d/newusers.new
+config etc/pam.d/passwd.new
+config etc/pam.d/shadow.new
+config etc/pam.d/su.new
+config etc/pam.d/su-l.new
+config etc/pam.d/useradd.new
+config etc/pam.d/userdel.new
+config etc/pam.d/usermod.new
+config var/log/faillog.new
+rm -f var/log/faillog.new
+
+# Install texinfo files
+
+install_info coreutils grep sed find find-maint which
+EOF
+
+#NOTE: maybe merge moreutils, kmod and gzip ?
+
+# Sources
+
+SRCNAME[0]=attr
+SRCVERS[0]=2.4.47
+SRCPACK[0]=http://download.savannah.gnu.org/releases/${SRCNAME[0]}/${SRCNAME[0]}-${SRCVERS[0]}.src.tar.gz
+SRCCOPY[0]="GPL2 LGPL21"
+
+build0()
+{
+export INSTALL_USER="root" INSTALL_GROUP="root"
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --libexecdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}"
+make ${JOBS}
+make install install-lib install-dev DESTDIR="${PKG}"
+changelog doc/CHANGES
+for i in get list multi remove set; do
+  man="attr_${i}.3"
+  manf="attr_${i}f.3"
+  rm -f ${PKG}${SYS_DIR[man]}/man3/${manf}
+  echo ".so man3/${man}" > ${PKG}${SYS_DIR[man]}/man3/${manf}
+done
+chmod 0755 ${PKG}${SYS_DIR[lib]}/libattr.so.*.*.*
+rm -rf \
+ ${PKG}${SYS_DIR[lib]}/libattr.a \
+ ${PKG}${SYS_DIR[doc]}/${SRCNAME[0]} \
+ ${PKG}${SYS_DIR[man]}/man2
+}
+
+SRCNAME[1]=acl
+SRCVERS[1]=2.2.52
+SRCPACK[1]=http://download.savannah.gnu.org/releases/${SRCNAME[1]}/${SRCNAME[1]}-${SRCVERS[1]}.src.tar.gz
+SRCCOPY[1]="GPL2 LGPL21"
+
+build1()
+{
+export INSTALL_USER="root" INSTALL_GROUP="root"
+CPPFLAGS="-I${PKG}${SYS_DIR[include]}" \
+LDFLAGS="-L${PKG}${SYS_DIR[lib]}" \
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --libexecdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}"
+make ${JOBS}
+make install install-lib install-dev DESTDIR="${PKG}"
+changelog doc/CHANGES
+rm -f ${PKG}${SYS_DIR[man]}/man3/acl_extended_file_nofollow.3
+echo ".so man3/acl_extended_file.3" > ${PKG}${SYS_DIR[man]}/man3/acl_extended_file_nofollow.3
+chmod 0755 ${PKG}${SYS_DIR[lib]}/libacl.so.*.*.*
+rm -rf ${PKG}${SYS_DIR[doc]}/${SRCNAME[1]}
+}
+
+SRCNAME[2]=libcap-ng
+SRCVERS[2]=0.7.3
+SRCPACK[2]=http://people.redhat.com/sgrubb/${SRCNAME[2]}/${SRCNAME[2]}-${SRCVERS[2]}.tar.gz
+SRCCOPY[2]="GPL2 LGPL21"
+
+build2()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' src/Makefile.in
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-python=no
+#FIXME: audit should use pkgconfig to find libcap-ng
+#--includedir=/usr/include/cap-ng
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog ChangeLog
+}
+
+SRCNAME[3]=libcap
+SRCVERS[3]=2.22
+SRCPACK[3]=ftp://ftp.kernel.org/pub/linux/libs/security/linux-privs/libcap2/${SRCNAME[3]}-${SRCVERS[3]}.tar.bz2
+SRCCOPY[3]="GPL2"
+
+build3()
+{
+sed -i 's|$(LIBDIR)/security|$(LIBDIR)/plugins/security|g' pam_cap/Makefile
+make ${JOBS} CFLAGS="${FLAGS}" lib="lib"
+make install DESTDIR="${PKG}" \
+ RAISE_SETFCAP="no" MANDIR="${PKG}${SYS_DIR[man]}" \
+ prefix="${SYS_DIR[usr]}" lib="lib"
+doc README
+license License
+chmod 0755 ${PKG}${SYS_DIR[lib]}/libcap.so.?.??
+rm -f ${PKG}${SYS_DIR[lib]}/libcap.a
+}
+
+SRCNAME[4]=shadow
+SRCVERS[4]=4.1.5.1
+SRCPACK[4]=http://pkg-shadow.alioth.debian.org/releases/${SRCNAME[4]}-${SRCVERS[4]}.tar.bz2
+
+build4()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-rpath \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --docdir="${SYS_DIR[doc]}/${SRCNAME[4]}-${SRCVERS[4]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --without-selinux \
+ --without-audit \
+ --without-libcrack \
+ --with-libpam \
+ --with-group-name-max-length=32
+make ${JOBS}
+make install DESTDIR="${PKG}"
+changelog NEWS
+license COPYING
+install.dir ${PKG}${SYS_DIR[var]}/log
+touch ${PKG}${SYS_DIR[var]}/log/faillog.new
+install.bin adduser ${PKG}${SYS_DIR[sbin]}
+#FIXME: compat
+(
+  cd ${PKG}${SYS_DIR[bin]}
+  ln -s ${SYS_DIR[sbin]}/faillog
+  ln -s ${SYS_DIR[sbin]}/lastlog
+  mv newgrp sg
+)
+install.dir ${PKG}/sbin
+(
+  cd ${PKG}/sbin
+  ln -s ${SYS_DIR[sbin]}/nologin
+)
+}
+
+SRCNAME[5]=util-linux
+SRCVERS[5]=2.23.1
+SRCPACK[5]=http://www.kernel.org/pub/linux/utils/${SRCNAME[5]}/v${SRCVERS[5]}/${SRCNAME[5]}-${SRCVERS[5]}.tar.xz
+SRCCOPY[5]="GPL3 GPL2 LGPL2 LGPL21 BSD4"
+
+build5()
+{
+sed -i 's|$(usrlib_execdir)/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.in
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --disable-rpath \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --bindir="${SYS_DIR[bin]}" \
+ --sbindir="${SYS_DIR[sbin]}" \
+ --with-systemdsystemunitdir="${SYS_DIR[systemdsystemunitdir]}" \
+ --disable-uuidd \
+ --disable-last \
+ --enable-fs-paths-default="/usr/sbin:/sbin:/sbin/fs.d:/sbin/fs" \
+ --enable-libblkid \
+ --enable-libmount \
+ --enable-libuuid \
+ --enable-agetty \
+ --enable-chfn-chsh \
+ --enable-line \
+ --enable-mesg \
+ --enable-newgrp \
+ --enable-raw \
+ --enable-rename \
+ --enable-reset \
+ --enable-schedutils \
+ --enable-tunelp \
+ --enable-vipw \
+ --enable-wall \
+ --enable-write \
+ --enable-use-tty-group
+#FIXME: Remove in 'last' from sysvinit ? (--disable-last)
+#FIXME: systemd --enable-socket-activation --> when switching to systemd
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog NEWS
+#rm -rf ${PKG}${SYS_DIR[man]}/ru
+#FIXME: compat
+(
+  cd ${PKG}${SYS_DIR[bin]}
+  ln -sf ${SYS_DIR[sbin]}/fdformat
+  ln -sf ${SYS_DIR[sbin]}/readprofile
+  ln -sf ${SYS_DIR[sbin]}/tunelp
+  ln -sf ${SYS_DIR[sbin]}/raw
+  ln -sf ${SYS_DIR[sbin]}/sulogin
+  cd ${PKG}${SYS_DIR[sbin]}
+  ln -sf hwclock clock
+  ln -sf ${SYS_DIR[bin]}/mount
+  ln -sf ${SYS_DIR[bin]}/umount
+  cd ${PKG}${SYS_DIR[man]}/man8
+  echo ".so man1/hwclock.8" > clock.8
+
+  install.dir ${PKG}/sbin
+  cd ${PKG}/sbin
+  ln -sf ${SYS_DIR[bin]}/mount
+  ln -sf ${SYS_DIR[bin]}/umount
+  ln -sf ${SYS_DIR[sbin]}/ctrlaltdel
+  ln -sf ${SYS_DIR[sbin]}/blkid
+  ln -sf ${SYS_DIR[sbin]}/fdisk
+  ln -sf ${SYS_DIR[sbin]}/fsck.minix
+  ln -sf ${SYS_DIR[sbin]}/switch_root
+  ln -sf ${SYS_DIR[sbin]}/mkfs.bfs
+  ln -sf ${SYS_DIR[sbin]}/mkfs
+  ln -sf ${SYS_DIR[sbin]}/cfdisk
+  ln -sf ${SYS_DIR[sbin]}/hwclock
+  ln -sf ${SYS_DIR[sbin]}/hwclock clock
+  ln -sf ${SYS_DIR[sbin]}/raw
+  ln -sf ${SYS_DIR[sbin]}/mkswap
+  ln -sf ${SYS_DIR[sbin]}/agetty
+  ln -sf ${SYS_DIR[sbin]}/fsck.cramfs
+  ln -sf ${SYS_DIR[sbin]}/losetup
+  ln -sf ${SYS_DIR[sbin]}/findfs
+  ln -sf ${SYS_DIR[sbin]}/mkfs.cramfs
+  ln -sf ${SYS_DIR[sbin]}/fsfreeze
+  ln -sf ${SYS_DIR[sbin]}/sfdisk
+  ln -sf ${SYS_DIR[sbin]}/fstrim
+  ln -sf ${SYS_DIR[sbin]}/swapon
+  ln -sf ${SYS_DIR[sbin]}/swapon swapoff
+  ln -sf ${SYS_DIR[sbin]}/fsck
+  ln -sf ${SYS_DIR[sbin]}/mkfs.minix
+  ln -sf ${SYS_DIR[sbin]}/swaplabel
+  ln -sf ${SYS_DIR[sbin]}/wipefs
+  ln -sf ${SYS_DIR[sbin]}/pivot_root
+  ln -sf ${SYS_DIR[sbin]}/blockdev
+  ln -sf ${SYS_DIR[sbin]}/sulogin
+)
+}
+
+SRCNAME[6]=procps-ng
+SRCVERS[6]=3.3.8
+SRCPACK[6]=${URL[sf]}/${SRCNAME[6]}/Production/${SRCNAME[6]}-${SRCVERS[6]}.tar.xz
+SRCCOPY[6]="GPL2 LGPL2"
+
+build6()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' proc/Makefile.in
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-rpath \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --docdir="${SYS_DIR[doc]}/${SRCNAME[5]}-${SRCVERS[5]}" \
+ --disable-kill \
+ --disable-skill \
+ --enable-w-from \
+ --enable-watch8bit
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog NEWS
+#FIXME: everything should end up in /usr not /usr/usr
+#FIXME: systemd (--with-systemd)
+mv ${PKG}${SYS_DIR[usr]}/usr/bin/* ${PKG}${SYS_DIR[bin]}
+rm -rf ${PKG}${SYS_DIR[usr]}/usr
+(
+  cd ${PKG}${SYS_DIR[bin]}
+  ln -sf pkill pgrep
+)
+}
+
+SRCNAME[7]=procinfo-ng
+SRCVERS[7]=2.0.304
+SRCPACK[7]=${URL[sf]}/procinfo-ng/${SRCNAME[7]}/${SRCVERS[7]}/${SRCNAME[7]}-${SRCVERS[7]}.tar.bz2
+SRCCOPY[7]="GPL2 LGPL21"
+
+build7()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}"
+make ${JOBS}
+make install DESTDIR="${PKG}"
+}
+
+SRCNAME[8]=psmisc
+SRCVERS[8]=22.20
+SRCPACK[8]=${URL[sf]}/psmisc/${SRCNAME[8]}/${SRCNAME[8]}-${SRCVERS[8]}.tar.gz
+SRCCOPY[8]="GPL2"
+
+build8()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-rpath \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}"
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog ChangeLog
+echo ".so man1/pstree.1" > ${PKG}${SYS_DIR[man]}/man1/pstree.x11.1
+}
+
+SRCNAME[9]=sysfsutils
+SRCVERS[9]=2.1.0
+SRCPACK[9]=${URL[sf]}/linux-diag/${SRCNAME[9]}-${SRCVERS[9]}.tar.gz
+SRCCOPY[9]="GPL2 LGPL21"
+
+build9()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}"
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS CREDITS docs/libsysfs.txt
+changelog ChangeLog
+}
+
+SRCNAME[10]=inotify-tools
+SRCVERS[10]=3.14
+SRCPACK[10]=http://github.com/downloads/rvoicilas/${SRCNAME[10]}/${SRCNAME[10]}-${SRCVERS[10]}.tar.gz
+SRCCOPY[10]="GPL2"
+
+build10()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}"
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS
+rm -rf ${PKG}${SYS_DIR[doc]}/${SRCNAME[10]}
+}
+
+SRCNAME[11]=less
+SRCVERS[11]=458
+SRCPACK[11]=http://www.greenwoodsoftware.com/less/${SRCNAME[11]}-${SRCVERS[11]}.tar.gz
+SRCCOPY[11]="GPL3 BSD2"
+
+build11()
+{
+chmod 0644 *
+chmod 0755 configure mkinstalldirs *.sh
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[conf]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-regex=posix \
+ --with-editor="${SYS_DIR[bin]}/vi"
+make ${JOBS}
+make install DESTDIR="${PKG}"
+changelog NEWS
+install.bin lesspipe.sh ${PKG}${SYS_DIR[bin]}
+}
+
+SRCNAME[12]=tree
+SRCVERS[12]=1.6.0
+SRCPACK[12]=ftp://mama.indstate.edu/linux/tree/${SRCNAME[12]}-${SRCVERS[12]}.tgz
+SRCCOPY[12]="GPL2"
+
+build12()
+{
+make ${JOBS} OPTS="${FLAGS}"
+make install prefix="${PKG}${SYS_DIR[usr]}" MANDIR="${PKG}${SYS_DIR[man]}/man1"
+doc README
+changelog CHANGES
+}
+
+SRCNAME[13]=which
+SRCVERS[13]=2.20
+SRCPACK[13]=http://carlo17.home.xs4all.nl/${SRCNAME[13]}/${SRCNAME[13]}-${SRCVERS[13]}.tar.gz
+SRCCOPY[13]="GPL3"
+
+build13()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --infodir="${SYS_DIR[info]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}"
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog NEWS
+}
+
+SRCNAME[14]=libarchive
+SRCVERS[14]=3.1.2
+SRCPACK[14]=http://libarchive.googlecode.com/files/${SRCNAME[14]}-${SRCVERS[14]}.tar.gz
+SRCCOPY[14]="BSD2"
+
+build14()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.in
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --includedir="${SYS_DIR[include]}/archive" \
+ --enable-posix-regex-lib=libc \
+ --enable-bsdtar=shared \
+ --enable-bsdcpio=shared \
+ --without-expat \
+ --without-openssl \
+ --without-lzo2
+#NOTE: can it replace uu{en,de}code ?
+#FIXME: Use CMake
+#cmake \
+# -DENABLE_NETTLE:BOOL="on" \
+# -DENABLE_OPENSSL:BOOL="off" \
+# -DENABLE_TAR_SHARED:BOOL="on" \
+# -DENABLE_CPIO_SHARED:BOOL="on" \
+# -DENABLE_XATTR:BOOL="on" \
+# -DENABLE_ACL:BOOL="on" \
+# -DENABLE_ICONV:BOOL="on" \
+#CMakeLists.txt
+make ${JOBS} V=1
+make check
+make install DESTDIR="${PKG}"
+changelog NEWS
+}
+
+SRCNAME[15]=debianutils
+SRCVERS[15]=4.3.4
+SRCPACK[15]=http://ftp.de.debian.org/debian/pool/main/d/${SRCNAME[15]}/${SRCNAME[15]}_${SRCVERS[15]}.tar.gz
+
+build15()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}"
+make ${JOBS}
+make install DESTDIR="${PKG}"
+#FIXME: replace the slackware run-parts hack with this one
+rm -f \
+ ${PKG}${SYS_DIR[bin]}/run-parts \
+ ${PKG}${SYS_DIR[sbin]}/installkernel \
+ ${PKG}${SYS_DIR[man]}/man{1,8}/{run-parts,installkernel}.? \
+ ${PKG}${SYS_DIR[man]}/??/man{1,8}/{run-parts,installkernel}.?
+}
+
+SRCNAME[16]=coreutils
+SRCVERS[16]=8.21
+SRCPACK[16]=http://ftp.gnu.org/gnu/${NAME}/${SRCNAME[16]}-${SRCVERS[16]}.tar.xz
+SRCCOPY[16]="GPL3"
+
+build16()
+{
+FORCE_UNSAFE_CONFIGURE=1 \
+DEFAULT_POSIX2_VERSION=199209 \
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --disable-rpath \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --infodir="${SYS_DIR[info]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --libexecdir="${SYS_DIR[lib]}/exec" \
+ --bindir="${SYS_DIR[bin]}" \
+ --enable-no-install-program="hostname,kill,uptime" \
+ --without-gmp
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+doc AUTHORS THANKS
+changelog NEWS
+install.dir ${PKG}${SYS_DIR[etc]}/{profile.d,conf.d}
+install.cfg dircolors.conf ${PKG}${SYS_DIR[conf]}/dircolors.conf.new
+install.bin dircolors.sh ${PKG}${SYS_DIR[etc]}/profile.d
+install.bin dircolors.csh ${PKG}${SYS_DIR[etc]}/profile.d
+(
+  cd ${PKG}${SYS_DIR[bin]}
+  ln -sf install ginstall
+  ln -sf uname arch
+  cd ${PKG}${SYS_DIR[man]}/man1
+  echo ".so man1/install.1" > ginstall.1
+  echo ".so man1/uname.1" > arch.1
+)
+rm -rf \
+ ${PKG}${SYS_DIR[share]}/locale/*/LC_TIME
+}
+
+SRCNAME[17]=findutils
+SRCVERS[17]=4.4.2
+SRCPACK[17]=${URL[gnu]}/${SRCNAME[17]}/${SRCNAME[17]}-${SRCVERS[17]}.tar.gz
+SRCCOPY[17]="GPL3"
+
+build17()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-rpath \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --infodir="${SYS_DIR[info]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}"
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+doc AUTHORS THANKS
+changelog NEWS
+}
+
+SRCNAME[18]=grep
+SRCVERS[18]=2.14
+SRCPACK[18]=${URL[gnu]}/${SRCNAME[18]}/${SRCNAME[18]}-${SRCVERS[18]}.tar.xz
+SRCCOPY[18]="GPL3"
+
+build18()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --disable-rpath \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --infodir="${SYS_DIR[info]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}"
+make ${JOBS} V=1 LIB_PCRE=${SYS_DIR[lib]}/libpcre.a
+make install DESTDIR="${PKG}"
+doc AUTHORS THANKS
+changelog NEWS
+}
+
+SRCNAME[19]=sed
+SRCVERS[19]=4.2.2
+SRCPACK[19]=${URL[gnu]}/${SRCNAME[19]}/${SRCNAME[19]}-${SRCVERS[19]}.tar.bz2
+SRCCOPY[19]="GPL3 FDL13"
+
+build19()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-rpath \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --infodir="${SYS_DIR[info]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}"
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS THANKS
+changelog NEWS
+}
+
+SRCNAME[20]=adjtimex
+SRCVERS[20]=1.29
+SRCPACK[20]=http://security.ubuntu.com/ubuntu/pool/universe/a/${SRCNAME[20]}/${SRCNAME[20]}_${SRCVERS[20]}.orig.tar.gz
+SRCCOPY[20]="GPL2"
+
+build20()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --sbindir="${SYS_DIR[sbin]}"
+make ${JOBS}
+make install DESTDIR="${PKG}"
+changelog ChangeLog
+#FIXME: compat
+(
+install.dir ${PKG}/sbin
+cd ${PKG}/sbin
+ln -sf ${SYS_DIR[sbin]}/adjtimex
+)
+}
+
+SRCNAME[21]=setserial
+SRCVERS[21]=2.17
+SRCPACK[21]=${URL[sf]}/${SRCNAME[21]}/${SRCNAME[21]}-${SRCVERS[21]}.tar.gz
+SRCCOPY[21]="GPL2"
+
+build21()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --bindir="${SYS_DIR[sbin]}"
+make ${JOBS}
+make install DESTDIR="${PKG}"
+install.dir ${PKG}${SYS_DIR[etc]}/rc.d
+install.dat rc.serial ${PKG}${SYS_DIR[etc]}/rc.d/rc.serial.new
+install.dat serial.conf ${PKG}${SYS_DIR[etc]}/serial.conf.new
+}
+
+SRCNAME[22]=net-tools
+SRCVERS[22]=20130121
+SRCPACK[22]=http://www.tazenda.demon.co.uk/phil/${SRCNAME[22]}/${SRCNAME[22]}-${SRCVERS[22]}.tar.xz
+
+build22()
+{
+make version.h
+make ${JOBS} CFLAGS="${FLAGS}"
+make install-hostname \
+ DESTDIR="${PKG}" \
+ MANDIR="${SYS_DIR[man]}" \
+ BINDIR="${SYS_DIR[bin]}" \
+ SBINDIR="${SYS_DIR[sbin]}"
+}
+
+SRCNAME[23]=mkpwd
+SRCVERS[23]=0.8
+SRCPACK[23]=http://www.o-schroeder.de/download/${SRCNAME[23]}-$(echo ${SRCVERS[23]} | tr . -).tgz
+SRCROOT[23]=${SRCNAME[23]}
+
+build23()
+{
+make FLAGS="${FLAGS}"
+make install DESTDIR="${PKG}"
+doc README
+changelog ChangeLog
+}
+
+SRCNAME[24]=slackwareutils
+SRCVERS[24]=$(date +%Y%m%d)
+#TODO: broken. Files are included in this repo.
+
+build24()
+{
+make ${JOBS} CFLAGS="${FLAGS}"
+make install DESTDIR="${PKG}" MANDIR="${SYS_DIR[man]}/man1"
+}
+
+SRCNAME[25]=config
+SRCVERS[25]=$(date +%Y%m%d)
+#TODO: broken. Files are included in this repo.
+
+build25()
+{
+make install-bin-package DESTDIR="${PKG}" EXT=".new"
+}
diff --git a/base/bin/coreutils-8.21-advcpmv.patch.xz b/base/bin/coreutils-8.21-advcpmv.patch.xz
new file mode 100644
index 0000000..a6e21f8
--- /dev/null
+++ b/base/bin/coreutils-8.21-advcpmv.patch.xz
diff --git a/base/bin/coreutils-8.21-dircolors.patch.xz b/base/bin/coreutils-8.21-dircolors.patch.xz
new file mode 100644
index 0000000..871c2d7
--- /dev/null
+++ b/base/bin/coreutils-8.21-dircolors.patch.xz
diff --git a/base/bin/coreutils-8.21-uname.patch.xz b/base/bin/coreutils-8.21-uname.patch.xz
new file mode 100644
index 0000000..8481390
--- /dev/null
+++ b/base/bin/coreutils-8.21-uname.patch.xz
diff --git a/base/bin/debianutils-4.3.4-nowhich.patch.xz b/base/bin/debianutils-4.3.4-nowhich.patch.xz
new file mode 100644
index 0000000..2339c63
--- /dev/null
+++ b/base/bin/debianutils-4.3.4-nowhich.patch.xz
diff --git a/base/bin/findutils-4.4.2-nodefaultoptionswarnings.patch.xz b/base/bin/findutils-4.4.2-nodefaultoptionswarnings.patch.xz
new file mode 100644
index 0000000..ae6397d
--- /dev/null
+++ b/base/bin/findutils-4.4.2-nodefaultoptionswarnings.patch.xz
diff --git a/base/bin/findutils-4.4.2-nolocate.patch.xz b/base/bin/findutils-4.4.2-nolocate.patch.xz
new file mode 100644
index 0000000..b3ff083
--- /dev/null
+++ b/base/bin/findutils-4.4.2-nolocate.patch.xz
diff --git a/base/bin/less-458-lesspipe.patch.xz b/base/bin/less-458-lesspipe.patch.xz
new file mode 100644
index 0000000..060419d
--- /dev/null
+++ b/base/bin/less-458-lesspipe.patch.xz
diff --git a/base/bin/less-458-sysconfdir.patch.xz b/base/bin/less-458-sysconfdir.patch.xz
new file mode 100644
index 0000000..351532a
--- /dev/null
+++ b/base/bin/less-458-sysconfdir.patch.xz
diff --git a/base/bin/libarchive-3.1.2-mtreefix.patch.xz b/base/bin/libarchive-3.1.2-mtreefix.patch.xz
new file mode 100644
index 0000000..c2a6d84
--- /dev/null
+++ b/base/bin/libarchive-3.1.2-mtreefix.patch.xz
diff --git a/base/bin/mkpwd-0.8-install.patch.xz b/base/bin/mkpwd-0.8-install.patch.xz
new file mode 100644
index 0000000..8a0d5d4
--- /dev/null
+++ b/base/bin/mkpwd-0.8-install.patch.xz
diff --git a/base/bin/net-tools-20130121-config.patch.xz b/base/bin/net-tools-20130121-config.patch.xz
new file mode 100644
index 0000000..9683ffa
--- /dev/null
+++ b/base/bin/net-tools-20130121-config.patch.xz
diff --git a/base/bin/net-tools-20130121-debian242.patch.xz b/base/bin/net-tools-20130121-debian242.patch.xz
new file mode 100644
index 0000000..a544220
--- /dev/null
+++ b/base/bin/net-tools-20130121-debian242.patch.xz
diff --git a/base/bin/net-tools-20130121-install.patch.xz b/base/bin/net-tools-20130121-install.patch.xz
new file mode 100644
index 0000000..0fd2fd2
--- /dev/null
+++ b/base/bin/net-tools-20130121-install.patch.xz
diff --git a/base/bin/net-tools-20130121-missingheaders.patch.xz b/base/bin/net-tools-20130121-missingheaders.patch.xz
new file mode 100644
index 0000000..ee76a47
--- /dev/null
+++ b/base/bin/net-tools-20130121-missingheaders.patch.xz
diff --git a/base/bin/setserial-2.17-autostuff.patch.xz b/base/bin/setserial-2.17-autostuff.patch.xz
new file mode 100644
index 0000000..bd991e0
--- /dev/null
+++ b/base/bin/setserial-2.17-autostuff.patch.xz
diff --git a/base/bin/setserial-2.17-install.patch.xz b/base/bin/setserial-2.17-install.patch.xz
new file mode 100644
index 0000000..097bd5a
--- /dev/null
+++ b/base/bin/setserial-2.17-install.patch.xz
diff --git a/base/bin/setserial-2.17-rcserial.patch.xz b/base/bin/setserial-2.17-rcserial.patch.xz
new file mode 100644
index 0000000..e4a12c1
--- /dev/null
+++ b/base/bin/setserial-2.17-rcserial.patch.xz
diff --git a/base/bin/setserial-2.17-undefTIOCGHAYESESP.patch.xz b/base/bin/setserial-2.17-undefTIOCGHAYESESP.patch.xz
new file mode 100644
index 0000000..d560709
--- /dev/null
+++ b/base/bin/setserial-2.17-undefTIOCGHAYESESP.patch.xz
diff --git a/base/bin/setserial-2.17-usr.patch.xz b/base/bin/setserial-2.17-usr.patch.xz
new file mode 100644
index 0000000..8ecfd4e
--- /dev/null
+++ b/base/bin/setserial-2.17-usr.patch.xz
diff --git a/base/bin/shadow-4.1.5.1-2ndskip.patch.xz b/base/bin/shadow-4.1.5.1-2ndskip.patch.xz
new file mode 100644
index 0000000..8811b0c
--- /dev/null
+++ b/base/bin/shadow-4.1.5.1-2ndskip.patch.xz
diff --git a/base/bin/shadow-4.1.5.1-adduser.patch.xz b/base/bin/shadow-4.1.5.1-adduser.patch.xz
new file mode 100644
index 0000000..4e1bb6c
--- /dev/null
+++ b/base/bin/shadow-4.1.5.1-adduser.patch.xz
diff --git a/base/bin/shadow-4.1.5.1-backupmode.patch.xz b/base/bin/shadow-4.1.5.1-backupmode.patch.xz
new file mode 100644
index 0000000..0071200
--- /dev/null
+++ b/base/bin/shadow-4.1.5.1-backupmode.patch.xz
diff --git a/base/bin/shadow-4.1.5.1-config.patch.xz b/base/bin/shadow-4.1.5.1-config.patch.xz
new file mode 100644
index 0000000..e21358b
--- /dev/null
+++ b/base/bin/shadow-4.1.5.1-config.patch.xz
diff --git a/base/bin/shadow-4.1.5.1-cryptglibc217v2.patch.xz b/base/bin/shadow-4.1.5.1-cryptglibc217v2.patch.xz
new file mode 100644
index 0000000..1719a5b
--- /dev/null
+++ b/base/bin/shadow-4.1.5.1-cryptglibc217v2.patch.xz
diff --git a/base/bin/shadow-4.1.5.1-goodname.patch.xz b/base/bin/shadow-4.1.5.1-goodname.patch.xz
new file mode 100644
index 0000000..d396bd3
--- /dev/null
+++ b/base/bin/shadow-4.1.5.1-goodname.patch.xz
diff --git a/base/bin/shadow-4.1.5.1-infoparentdir.patch.xz b/base/bin/shadow-4.1.5.1-infoparentdir.patch.xz
new file mode 100644
index 0000000..ec0f6e7
--- /dev/null
+++ b/base/bin/shadow-4.1.5.1-infoparentdir.patch.xz
diff --git a/base/bin/shadow-4.1.5.1-install.patch.xz b/base/bin/shadow-4.1.5.1-install.patch.xz
new file mode 100644
index 0000000..4d094fb
--- /dev/null
+++ b/base/bin/shadow-4.1.5.1-install.patch.xz
diff --git a/base/bin/shadow-4.1.5.1-logmsg.patch.xz b/base/bin/shadow-4.1.5.1-logmsg.patch.xz
new file mode 100644
index 0000000..33c43f3
--- /dev/null
+++ b/base/bin/shadow-4.1.5.1-logmsg.patch.xz
diff --git a/base/bin/shadow-4.1.5.1-mergegroup.patch.xz b/base/bin/shadow-4.1.5.1-mergegroup.patch.xz
new file mode 100644
index 0000000..4411177
--- /dev/null
+++ b/base/bin/shadow-4.1.5.1-mergegroup.patch.xz
diff --git a/base/bin/shadow-4.1.5.1-strncpy.patch.xz b/base/bin/shadow-4.1.5.1-strncpy.patch.xz
new file mode 100644
index 0000000..8ec1169
--- /dev/null
+++ b/base/bin/shadow-4.1.5.1-strncpy.patch.xz
diff --git a/base/bin/shadow-4.1.5.1-suidmode.patch.xz b/base/bin/shadow-4.1.5.1-suidmode.patch.xz
new file mode 100644
index 0000000..1a1b798
--- /dev/null
+++ b/base/bin/shadow-4.1.5.1-suidmode.patch.xz
diff --git a/base/bin/shadow-4.1.5.1-xstrdup.patch.xz b/base/bin/shadow-4.1.5.1-xstrdup.patch.xz
new file mode 100644
index 0000000..1722e40
--- /dev/null
+++ b/base/bin/shadow-4.1.5.1-xstrdup.patch.xz
diff --git a/base/bin/tree-1.6.0-optflags.patch.xz b/base/bin/tree-1.6.0-optflags.patch.xz
new file mode 100644
index 0000000..dfa1725
--- /dev/null
+++ b/base/bin/tree-1.6.0-optflags.patch.xz
diff --git a/base/bin/tree-1.6.0-perms.patch.xz b/base/bin/tree-1.6.0-perms.patch.xz
new file mode 100644
index 0000000..a3d920a
--- /dev/null
+++ b/base/bin/tree-1.6.0-perms.patch.xz
diff --git a/base/bluetooth/bluetooth.build b/base/bluetooth/bluetooth.build
new file mode 100755
index 0000000..89c63cb
--- /dev/null
+++ b/base/bluetooth/bluetooth.build
@@ -0,0 +1,171 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=bluetooth
+VERSION=4.101
+BUILD=3
+DEPENDS=('glib >= 2.36.0-1' 'dbus >= 1.6.8-1')
+OPTDEPENDS=('libical >= 1.0-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: bluetooth
+${NAME}:
+${NAME}: A wireless standard for exchanging data over short distances.
+${NAME}:
+${NAME}: This package provides the libraries and utilities and other support
+${NAME}: files to use bluetooth adapters and devices.
+${NAME}:
+${NAME}: Homepage: http://www.bluez.org
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+# Keep same perms on rc.bluetooth.new:
+if [ -e etc/rc.d/rc.bluetooth ]; then
+  cp -a etc/rc.d/rc.bluetooth etc/rc.d/rc.bluetooth.new.incoming
+  cat etc/rc.d/rc.bluetooth.new > etc/rc.d/rc.bluetooth.new.incoming
+  mv etc/rc.d/rc.bluetooth.new.incoming etc/rc.d/rc.bluetooth.new
+fi
+
+config etc/rc.d/rc.bluetooth.new
+config etc/bluetooth/audio.conf.new
+config etc/bluetooth/input.conf.new
+config etc/bluetooth/main.conf.new
+config etc/bluetooth/network.conf.new
+config etc/bluetooth/serial.conf.new
+config etc/bluetooth/rfcomm.conf.new
+config etc/modprobe.d/bluetooth.conf.new
+EOF
+
+# Sources
+
+SRCNAME[0]=bluez
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://www.kernel.org/pub/linux/bluetooth/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="GPL2 LGPL21"
+
+build0()
+{
+sed -i 's|$(libdir)/alsa-lib|$(libdir)/plugins/alsa-1|g' Makefile.in
+sed -i 's|$(libdir)/cups/backend|$(libdir)/exec/cups/backend|g' Makefile.in
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.in
+sed -i 's|$(libdir)/bluetooth/plugins|$(libdir)/plugins/bluetooth|g' Makefile.{in,am}
+sed -i 's|${libdir}/bluetooth/plugins|${libdir}/plugins/bluetooth|g' configure acinclude.m4
+sed -i 's|udevdir = @UDEV_DIR@|udevdir = $(libdir)/exec/udev|g' Makefile.in
+sed -i 's|rulesdir = @UDEV_DIR@/rules.d|rulesdir = $(datadir)/udev/rules|g' Makefile.in
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --enable-shared=yes \
+ --enable-static=no \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-systemdunitdir="${SYS_DIR[systemdsystemunitdir]}" \
+ --enable-alsa \
+ --enable-usb \
+ --enable-pnat \
+ --enable-tools \
+ --enable-bccmd \
+ --enable-hid2hci \
+ --enable-dfutool \
+ --enable-hidd \
+ --enable-pand \
+ --enable-dund \
+ --enable-cups \
+ --enable-service \
+ --enable-datafiles
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog ChangeLog
+install.dir ${PKG}${SYS_DIR[udevrules]}
+install.dir ${PKG}${SYS_DIR[udevscripts]}
+install.bin bluetooth.sh ${PKG}${SYS_DIR[udevscripts]}/bluetooth
+install.bin scripts/bluetooth_serial ${PKG}${SYS_DIR[udevscripts]}
+#FIXME: this will have to go when systemd arrives
+install.dat 97-bluetooth.rules ${PKG}${SYS_DIR[udevrules]}
+install.dir ${PKG}${SYS_DIR[etc]}/{rc.d,modprobe.d,bluetooth}
+install.cfg bluetooth.modprobe ${PKG}${SYS_DIR[etc]}/modprobe.d/bluetooth.conf.new
+install.cfg rc.bluetooth ${PKG}${SYS_DIR[etc]}/rc.d/rc.bluetooth.new
+install.cfg audio/audio.conf \
+ ${PKG}${SYS_DIR[etc]}/bluetooth/audio.conf.new
+install.cfg input/input.conf \
+ ${PKG}${SYS_DIR[etc]}/bluetooth/input.conf.new
+install.cfg network/network.conf \
+ ${PKG}${SYS_DIR[etc]}/bluetooth/network.conf.new
+install.cfg serial/serial.conf \
+ ${PKG}${SYS_DIR[etc]}/bluetooth/serial.conf.new
+config ${PKG}${SYS_DIR[etc]}/bluetooth/main.conf
+config ${PKG}${SYS_DIR[etc]}/bluetooth/rfcomm.conf
+rm -rf ${PKG}${SYS_DIR[lib]}/bluetooth
+# Remove this directory if there's no plugin in it
+rmdir ${PKG}${SYS_DIR[lib]}/plugins/bluetooth
+}
+
+SRCNAME[1]=obexd
+SRCVERS[1]=0.48
+SRCPACK[1]=http://www.kernel.org/pub/linux/bluetooth/${SRCNAME[1]}-${SRCVERS[1]}.tar.gz
+SRCCOPY[1]="GPL2"
+
+build1()
+{
+sed -i 's|${libdir}/obex/plugins|${libdir}/plugins/obex|g' configure
+BLUEZ_CFLAGS="-I${PKG}${SYS_DIR[include]}" \
+BLUEZ_LIBS="-L${PKG}${SYS_DIR[lib]} -lbluetooth" \
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --libexecdir="${SYS_DIR[lib]}/exec" \
+ --enable-usb \
+ --enable-pcsuite
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog ChangeLog
+# Remove this directory if there's no plugin in it
+rmdir ${PKG}${SYS_DIR[lib]}/plugins/obex
+}
diff --git a/base/bluetooth/bluez-4.101-dbusconfig.patch.xz b/base/bluetooth/bluez-4.101-dbusconfig.patch.xz
new file mode 100644
index 0000000..3569c31
--- /dev/null
+++ b/base/bluetooth/bluez-4.101-dbusconfig.patch.xz
diff --git a/base/bluetooth/bluez-4.101-dellmouse.patch.xz b/base/bluetooth/bluez-4.101-dellmouse.patch.xz
new file mode 100644
index 0000000..f2741bd
--- /dev/null
+++ b/base/bluetooth/bluez-4.101-dellmouse.patch.xz
diff --git a/base/bluetooth/bluez-4.101-modprobe.patch.xz b/base/bluetooth/bluez-4.101-modprobe.patch.xz
new file mode 100644
index 0000000..877d642
--- /dev/null
+++ b/base/bluetooth/bluez-4.101-modprobe.patch.xz
diff --git a/base/bluetooth/bluez-4.101-sndfile.patch.xz b/base/bluetooth/bluez-4.101-sndfile.patch.xz
new file mode 100644
index 0000000..6b762c9
--- /dev/null
+++ b/base/bluetooth/bluez-4.101-sndfile.patch.xz
diff --git a/base/bluetooth/bluez-4.101-sysvinit.patch.xz b/base/bluetooth/bluez-4.101-sysvinit.patch.xz
new file mode 100644
index 0000000..f869443
--- /dev/null
+++ b/base/bluetooth/bluez-4.101-sysvinit.patch.xz
diff --git a/base/bluetooth/bluez-4.101-udev.patch.xz b/base/bluetooth/bluez-4.101-udev.patch.xz
new file mode 100644
index 0000000..028b114
--- /dev/null
+++ b/base/bluetooth/bluez-4.101-udev.patch.xz
diff --git a/base/bluetooth/bluez-4.101-usb.patch.xz b/base/bluetooth/bluez-4.101-usb.patch.xz
new file mode 100644
index 0000000..49a6c68
--- /dev/null
+++ b/base/bluetooth/bluez-4.101-usb.patch.xz
diff --git a/base/bluetooth/obexd-0.48-unistdh.patch.xz b/base/bluetooth/obexd-0.48-unistdh.patch.xz
new file mode 100644
index 0000000..7c84837
--- /dev/null
+++ b/base/bluetooth/obexd-0.48-unistdh.patch.xz
diff --git a/base/bzip2/bzip2-1.0.6-install.patch.xz b/base/bzip2/bzip2-1.0.6-install.patch.xz
new file mode 100644
index 0000000..ba1fbfa
--- /dev/null
+++ b/base/bzip2/bzip2-1.0.6-install.patch.xz
diff --git a/base/bzip2/bzip2-1.0.6-optflags.patch.xz b/base/bzip2/bzip2-1.0.6-optflags.patch.xz
new file mode 100644
index 0000000..95f7203
--- /dev/null
+++ b/base/bzip2/bzip2-1.0.6-optflags.patch.xz
diff --git a/base/bzip2/bzip2-1.0.6-saneso.patch.xz b/base/bzip2/bzip2-1.0.6-saneso.patch.xz
new file mode 100644
index 0000000..04f162c
--- /dev/null
+++ b/base/bzip2/bzip2-1.0.6-saneso.patch.xz
diff --git a/base/bzip2/bzip2.build b/base/bzip2/bzip2.build
new file mode 100755
index 0000000..fbc73a9
--- /dev/null
+++ b/base/bzip2/bzip2.build
@@ -0,0 +1,85 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=bzip2
+VERSION=1.0.6
+BUILD=2
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: bzip2 (a block-sorting file compressor)
+${NAME}:
+${NAME}: Bzip2 compresses files using the Burrows-Wheeler block sorting text
+${NAME}: compression algorithm, and Huffman coding. Compression is generally
+${NAME}: considerably better than that achieved by more conventional LZ77/LZ78-
+${NAME}: based compressors, and approaches the performance of the PPM family of
+${NAME}: statistical compressors.
+${NAME}:
+${NAME}: Homepage: http://www.bzip.org
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://www.bzip.org/${SRCVERS[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="BSD4"
+
+build0()
+{
+make ${JOBS} OPTFLAGS="${FLAGS}" -f Makefile-libbz2_so
+make ${JOBS} OPTFLAGS="${FLAGS}"
+make install install-so DESTDIR="${PKG}" \
+ PREFIX="${SYS_DIR[usr]}" \
+ MANDIR="${SYS_DIR[man]}" \
+ LIBDIR="${SYS_DIR[lib]}"
+changelog CHANGES
+rm -f \
+ ${PKG}${SYS_DIR[bin]}/bzip2
+mv \
+ ${PKG}${SYS_DIR[bin]}/bzip2-shared \
+ ${PKG}${SYS_DIR[bin]}/sbzip2
+(
+  cd ${PKG}${SYS_DIR[man]}/man1
+  mv bzip2.1 sbzip2.1
+)
+}
+
+SRCNAME[1]=pbzip2
+SRCVERS[1]=1.1.6
+SRCPACK[1]=http://compression.ca/${SRCNAME[1]}/${SRCNAME[1]}-${SRCVERS[1]}.tar.gz
+SRCCOPY[1]="BSD4"
+
+build1()
+{
+
+make ${JOBS} OPTFLAGS="${FLAGS}"
+doc AUTHORS
+changelog ChangeLog
+install.dir ${PKG}${SYS_DIR[bin]}
+install.bin pbzip2 ${PKG}${SYS_DIR[bin]}/bzip2
+install.dir ${PKG}${SYS_DIR[man]}/man1
+install.man pbzip2.1 ${PKG}${SYS_DIR[man]}/man1
+(
+  cd ${PKG}${SYS_DIR[bin]}
+  ln -sf bzip2 pbzip2
+  ln -sf bzip2 pbzcat
+  ln -sf bzip2 pbunzip2
+  cd ${PKG}${SYS_DIR[man]}/man1
+  echo ".so man1/pbzip2.1" > bzip2.1
+)
+}
diff --git a/base/bzip2/pbzip2-1.1.6-optflags.patch.xz b/base/bzip2/pbzip2-1.1.6-optflags.patch.xz
new file mode 100644
index 0000000..a6eee1a
--- /dev/null
+++ b/base/bzip2/pbzip2-1.1.6-optflags.patch.xz
diff --git a/base/ca_certificates/ca-certificates-20130119-destdir.patch.xz b/base/ca_certificates/ca-certificates-20130119-destdir.patch.xz
new file mode 100644
index 0000000..8c5b795
--- /dev/null
+++ b/base/ca_certificates/ca-certificates-20130119-destdir.patch.xz
diff --git a/base/ca_certificates/ca-certificates-20130119-fixupdate.patch.xz b/base/ca_certificates/ca-certificates-20130119-fixupdate.patch.xz
new file mode 100644
index 0000000..765d042
--- /dev/null
+++ b/base/ca_certificates/ca-certificates-20130119-fixupdate.patch.xz
diff --git a/base/ca_certificates/ca-certificates-20130119-nodebconf.patch.xz b/base/ca_certificates/ca-certificates-20130119-nodebconf.patch.xz
new file mode 100644
index 0000000..a635447
--- /dev/null
+++ b/base/ca_certificates/ca-certificates-20130119-nodebconf.patch.xz
diff --git a/base/ca_certificates/ca-certificates-20130119-paths.patch.xz b/base/ca_certificates/ca-certificates-20130119-paths.patch.xz
new file mode 100644
index 0000000..58c7983
--- /dev/null
+++ b/base/ca_certificates/ca-certificates-20130119-paths.patch.xz
diff --git a/base/ca_certificates/ca_certificates.build b/base/ca_certificates/ca_certificates.build
new file mode 100755
index 0000000..7d6ccb6
--- /dev/null
+++ b/base/ca_certificates/ca_certificates.build
@@ -0,0 +1,61 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=ca_certificates
+VERSION=20130119
+ARCH=noarch
+BUILD=1
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: ca-certificates (PEM Files of CA Certificates)
+${NAME}:
+${NAME}: This package includes PEM files of CA certificates to allow
+${NAME}: SSL-based applications to check for the authenticity of SSL
+${NAME}: connections.
+${NAME}:
+${NAME}: Homepage: http://packages.qa.debian.org/c/ca-certificates.html
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+chroot . usr/sbin/update-ca-certificates --fresh 1>/dev/null 2>/dev/null
+EOF
+
+# Sources
+
+SRCNAME[0]=ca-certificates
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://packages.debian.org/source/testing/${SRCNAME[0]}/${SRCNAME[0]}_${SRCVERS[0]}.tar.gz
+
+build0()
+{
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc debian/NEWS
+install.dat doinst.sh ${PKG}/install
+install.dir ${PKG}${SYS_DIR[man]}/man8
+install.man sbin/update-ca-certificates.8 ${PKG}${SYS_DIR[man]}/man8
+install.dir ${PKG}${SYS_DIR[share]}/ca-certificates/update
+install.dir ${PKG}${SYS_DIR[var]}/cache/cacerts
+echo "# Automatically generated by ${NAME}-${VERSION}" > ${PKG}${SYS_DIR[var]}/cache/cacerts/cacerts.cache
+(
+  cd ${PKG}${SYS_DIR[share]}/ca-certificates
+  find . -name '*.crt' | sort | cut -b3-
+) >> ${PKG}${SYS_DIR[var]}/cache/cacerts/cacerts.cache
+}
diff --git a/base/cgroup/cgroup.build b/base/cgroup/cgroup.build
new file mode 100755
index 0000000..d45be0b
--- /dev/null
+++ b/base/cgroup/cgroup.build
@@ -0,0 +1,125 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=cgroup
+VERSION=0.38
+BUILD=3
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: libcgroup (library and utilities for kernel control groups)
+${NAME}:
+${NAME}: Control Groups provide a mechanism for aggregating/partitioning sets
+${NAME}: of tasks, and all their future children, into hierarchical groups
+${NAME}: with specialized behaviour.  It makes use of a filesystem interface.
+${NAME}: This package contains a library for developing applications that use
+${NAME}: control groups, as well as some basic userspace tools for controlling
+${NAME}: and monitoring control groups.
+${NAME}:
+${NAME}: Homepage: http://libcg.sourceforge.net
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+# Leave any new rc files with the same permissions as the old ones:
+if [ -e etc/rc.d/rc.cgconfig ]; then
+  if [ -x etc/rc.d/rc.cgconfig ]; then
+    chmod 755 etc/rc.d/rc.cgconfig.new
+  else
+    chmod 644 etc/rc.d/rc.cgconfig.new
+  fi
+fi
+if [ -e etc/rc.d/rc.cgred ]; then
+  if [ -x etc/rc.d/rc.cgred ]; then
+    chmod 755 etc/rc.d/rc.cgred.new
+  else
+    chmod 644 etc/rc.d/rc.cgred.new
+  fi
+fi
+
+# Then config() them:
+config etc/rc.d/rc.cgconfig.new
+config etc/rc.d/rc.cgred.new
+
+# config() the other configuration files:
+config etc/cgroup/cgconfig.conf.new
+config etc/cgroup/cgred.conf.new
+config etc/cgroup/cgrules.conf.new
+config etc/cgroup/cgsnapshot_blacklist.conf.new
+
+# If there are already installed config files, get rid of the .new ones.
+# There will still be fresh samples in the docs.
+rm -f etc/cgroup/cgconfig.conf.new etc/cgroup/cgred.conf.new etc/cgroup/cgrules.conf.new etc/cgroup/cgsnapshot_blacklist.conf.new
+EOF
+
+# Sources
+
+SRCNAME[0]=libcgroup
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=${URL[sf]}/libcg/${SRCNAME[0]}/v${SRCVERS[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.bz2
+SRCCOPY[0]="LGPL21"
+
+build0()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.in
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --enable-cgred-socket="${SYS_DIR[run]}/cgred/cgred.socket" \
+ --enable-pam-module-dir="${SYS_DIR[lib]}/plugins/security" \
+ --enable-pam=yes
+#FIXME: systemd --enable-opaque-hierarchy="name:systemd"
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc README{,_{daemon,systemd}}
+install.dir ${PKG}${SYS_DIR[etc]}/{rc.d,cgroup,tmpfiles.d}
+install.dat cgroup.conf.tmpfiles ${PKG}${SYS_DIR[etc]}/tmpfiles.d/cgroup.conf
+install.dat scripts/init.d/cgconfig ${PKG}${SYS_DIR[etc]}/rc.d/rc.cgconfig.new
+install.dat scripts/init.d/cgred ${PKG}${SYS_DIR[etc]}/rc.d/rc.cgred.new
+install.dat samples/cgred.conf ${PKG}${SYS_DIR[etc]}/cgroup/cgred.conf.new
+install.dat samples/cgconfig.conf ${PKG}${SYS_DIR[etc]}/cgroup/cgconfig.conf.new
+install.dat samples/cgrules.conf ${PKG}${SYS_DIR[etc]}/cgroup/cgrules.conf.new
+install.dat samples/cgsnapshot_blacklist.conf ${PKG}${SYS_DIR[etc]}/cgroup/cgsnapshot_blacklist.conf.new
+install.dir ${PKG}${SYS_DIR[systemdsystemunitdir]}
+install.dat dist/cgconfig.service ${PKG}${SYS_DIR[systemdsystemunitdir]}
+(
+  cd ${PKG}${SYS_DIR[lib]}/plugins/security
+  rm -f pam_cgroup.so pam_cgroup.so.0
+  mv pam_cgroup.so.0.0.0 pam_cgroup.so
+)
+}
diff --git a/base/cgroup/libcgroup-0.38-init.patch.xz b/base/cgroup/libcgroup-0.38-init.patch.xz
new file mode 100644
index 0000000..16a72c6
--- /dev/null
+++ b/base/cgroup/libcgroup-0.38-init.patch.xz
diff --git a/base/cgroup/libcgroup-0.38-sysconfdir.patch.xz b/base/cgroup/libcgroup-0.38-sysconfdir.patch.xz
new file mode 100644
index 0000000..409de8a
--- /dev/null
+++ b/base/cgroup/libcgroup-0.38-sysconfdir.patch.xz
diff --git a/base/cgroup/libcgroup-0.38-systemd.patch.xz b/base/cgroup/libcgroup-0.38-systemd.patch.xz
new file mode 100644
index 0000000..2b48553
--- /dev/null
+++ b/base/cgroup/libcgroup-0.38-systemd.patch.xz
diff --git a/base/cgroup/libcgroup-0.38-tmpfilesd.patch.xz b/base/cgroup/libcgroup-0.38-tmpfilesd.patch.xz
new file mode 100644
index 0000000..baa5221
--- /dev/null
+++ b/base/cgroup/libcgroup-0.38-tmpfilesd.patch.xz
diff --git a/base/cryptsetup/cryptsetup.build b/base/cryptsetup/cryptsetup.build
new file mode 100755
index 0000000..2e2bb12
--- /dev/null
+++ b/base/cryptsetup/cryptsetup.build
@@ -0,0 +1,66 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=cryptsetup
+VERSION=1.6.0
+BUILD=2
+DEPENDS=('lvm >= 2.02.98-1' 'libpwquality >= 1.2.1-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: cryptsetup (utility for setting up encrypted filesystems)
+${NAME}:
+${NAME}: LUKS is a standard for cross-platform hard disk encryption. It
+${NAME}: provides secure management of multiple user passwords and stores
+${NAME}: setup information in the partition header. LUKS for dm-crypt is now
+${NAME}: implemented in cryptsetup replacing the original cryptsetup. It
+${NAME}: provides all the functionally of the original version plus all LUKS
+${NAME}: features.
+${NAME}:
+${NAME}: Homepage:  http://code.google.com/p/cryptsetup
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://cryptsetup.googlecode.com/files/${SRCNAME[0]}-${SRCVERS[0]}.tar.bz2
+SRCCOPY[0]="GPL2 LGPL21"
+
+build0()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' lib/Makefile.in
+CPPFLAGS="-I${SYS_DIR[include]}/pwquality" \
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-rpath \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-crypto_backend=nettle \
+ --enable-cryptsetup-reencrypt \
+ --disable-selinux \
+ --enable-pwquality
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS FAQ docs/*-ReleaseNotes
+}
diff --git a/base/dbus/dbus-1.6.8-allowrootglobally.patch.xz b/base/dbus/dbus-1.6.8-allowrootglobally.patch.xz
new file mode 100644
index 0000000..74b739e
--- /dev/null
+++ b/base/dbus/dbus-1.6.8-allowrootglobally.patch.xz
diff --git a/base/dbus/dbus-1.6.8-archdependentheader.patch.xz b/base/dbus/dbus-1.6.8-archdependentheader.patch.xz
new file mode 100644
index 0000000..9c6961d
--- /dev/null
+++ b/base/dbus/dbus-1.6.8-archdependentheader.patch.xz
diff --git a/base/dbus/dbus-1.6.8-dbussethome.patch.xz b/base/dbus/dbus-1.6.8-dbussethome.patch.xz
new file mode 100644
index 0000000..1892e8d
--- /dev/null
+++ b/base/dbus/dbus-1.6.8-dbussethome.patch.xz
diff --git a/base/dbus/dbus-1.6.8-systemdusersession.patch.xz b/base/dbus/dbus-1.6.8-systemdusersession.patch.xz
new file mode 100644
index 0000000..8f5ad4b
--- /dev/null
+++ b/base/dbus/dbus-1.6.8-systemdusersession.patch.xz
diff --git a/base/dbus/dbus-1.6.8-sysvinit.patch.xz b/base/dbus/dbus-1.6.8-sysvinit.patch.xz
new file mode 100644
index 0000000..4f7f13d
--- /dev/null
+++ b/base/dbus/dbus-1.6.8-sysvinit.patch.xz
diff --git a/base/dbus/dbus.build b/base/dbus/dbus.build
new file mode 100755
index 0000000..d3eab82
--- /dev/null
+++ b/base/dbus/dbus.build
@@ -0,0 +1,127 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=dbus
+VERSION=1.6.8
+BUILD=2
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: dbus (message bus system)
+${NAME}:
+${NAME}: D-Bus is a message bus system, a simple way for applications to talk
+${NAME}: to one another. In addition to interprocess communication, D-Bus
+${NAME}: helps coordinate process lifecycle; it makes it simple and reliable
+${NAME}: to code a "single instance" application or daemon, and to launch
+${NAME}: applications and daemons on demand when their services are needed.
+${NAME}:
+${NAME}: Homepage: http://www.freedesktop.org/wiki/Software/dbus
+${NAME}:
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+# Keep same perms on rc.messagebus.new:
+
+if [ -e etc/rc.d/rc.messagebus ]; then
+  cp -a etc/rc.d/rc.messagebus etc/rc.d/rc.messagebus.new.incoming
+  cat etc/rc.d/rc.messagebus.new > etc/rc.d/rc.messagebus.new.incoming
+  mv etc/rc.d/rc.messagebus.new.incoming etc/rc.d/rc.messagebus.new
+fi
+
+config etc/rc.d/rc.messagebus.new
+config etc/dbus-1/session.conf.new
+config etc/dbus-1/system.conf.new
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://dbus.freedesktop.org/releases/dbus/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+
+build0()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.in
+sed -i "s|@ARCHITECTURE@|$(uname -m)|g" dbus/Makefile.{am,in} dbus-1.pc.in
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --htmldir="${SYS_DIR[html]}/${SRCNAME[0]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --libexecdir="${SYS_DIR[lib]}/exec" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-init-scripts=slackware \
+ --with-system-pid-file="${SYS_DIR[run]}/dbus/pid" \
+ --with-system-socket="${SYS_DIR[run]}/dbus/system_bus_socket" \
+ --with-console-auth-dir="${SYS_DIR[run]}/console" \
+ --with-systemdsystemunitdir="${SYS_DIR[systemdsystemunitdir]}" \
+ --with-xml=expat \
+ --disable-verbose-mode \
+ --disable-doxygen-docs \
+ --disable-tests \
+ --disable-asserts \
+ --disable-dnotify \
+ --enable-inotify \
+ --enable-x11-autolaunch
+#FIXME: systemd
+#--enable-systemd
+#--enable-userdb-cache
+#--enable-console-owner-file
+#--with-console-owner-file=
+#--with-dbus-daemondir=
+#--with-session-socket-dir=/tmp
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog NEWS
+license COPYING
+install.dir ${PKG}${SYS_DIR[bin]}
+install.dir ${PKG}${SYS_DIR[etc]}/rc.d
+install.bin rc.messagebus.new ${PKG}${SYS_DIR[etc]}/rc.d
+rm -rf \
+ ${PKG}${SYS_DIR[etc]}/rc.d/rc.messagebus \
+ ${PKG}${SYS_DIR[sbin]} \
+ ${PKG}${SYS_DIR[share]}/dbus-1 \
+ ${PKG}${SYS_DIR[lib]}/exec/dbus-1 \
+ ${PKG}${SYS_DIR[doc]}/dbus \
+ ${PKG}${SYS_DIR[html]} \
+ ${PKG}${SYS_DIR[var]}/run
+config ${PKG}${SYS_DIR[etc]}/dbus-1/session.conf
+config ${PKG}${SYS_DIR[etc]}/dbus-1/system.conf
+chown messagebus ${PKG}${SYS_DIR[var]}/lib/dbus
+}
diff --git a/base/dhcpcd/dhcpcd-5.6.8-rundir.patch.xz b/base/dhcpcd/dhcpcd-5.6.8-rundir.patch.xz
new file mode 100644
index 0000000..e8ff72c
--- /dev/null
+++ b/base/dhcpcd/dhcpcd-5.6.8-rundir.patch.xz
diff --git a/base/dhcpcd/dhcpcd-5.6.8-slackwareservice.patch.xz b/base/dhcpcd/dhcpcd-5.6.8-slackwareservice.patch.xz
new file mode 100644
index 0000000..558ea4a
--- /dev/null
+++ b/base/dhcpcd/dhcpcd-5.6.8-slackwareservice.patch.xz
diff --git a/base/dhcpcd/dhcpcd.build b/base/dhcpcd/dhcpcd.build
new file mode 100755
index 0000000..ead7eb6
--- /dev/null
+++ b/base/dhcpcd/dhcpcd.build
@@ -0,0 +1,84 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=dhcpcd
+VERSION=5.6.8
+BUILD=1
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: dhcpcd (DHCP client daemon)
+${NAME}:
+${NAME}: The DHCP client program dhcpcd is used to connect to a network by
+${NAME}: contacting a DHCP server. Dhcpcd gets an IP address and other
+${NAME}: information from a corresponding DHCP server, configures the network
+${NAME}: interface automatically, and tries to renew the lease time according
+${NAME}: to RFC2131 or RFC1541 depending on the command line option.
+${NAME}:
+${NAME}: Homepage: http://roy.marples.name/projects/dhcpcd
+${NAME}:
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/dhcpcd.conf.new
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://roy.marples.name/downloads/dhcpcd/${SRCNAME[0]}-${SRCVERS[0]}.tar.bz2
+SRCCOPY[0]="BSD2"
+
+build0()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --libexecdir="${SYS_DIR[share]}/net/dhcpcd" \
+ --dbdir="${SYS_DIR[var]}/lib/dhcpcd" \
+ --rundir="${SYS_DIR[run]}/dhcpcd"
+make ${JOBS}
+make install DESTDIR="${PKG}" HOOKSCRIPTS="50-ntp.conf 50-yp.conf"
+doc README
+config ${PKG}${SYS_DIR[etc]}/dhcpcd.conf
+#FIXME: compat
+install.dir ${PKG}/sbin
+(
+  cd ${PKG}/sbin
+  ln -sf ${SYS_DIR[sbin]}/dhcpcd
+)
+}
diff --git a/base/dialog/dialog-1.2-20130523-dialogrc.patch.xz b/base/dialog/dialog-1.2-20130523-dialogrc.patch.xz
new file mode 100644
index 0000000..c9ac90d
--- /dev/null
+++ b/base/dialog/dialog-1.2-20130523-dialogrc.patch.xz
diff --git a/base/dialog/dialog-1.2-20130523-smallerminheight.patch.xz b/base/dialog/dialog-1.2-20130523-smallerminheight.patch.xz
new file mode 100644
index 0000000..c3c7054
--- /dev/null
+++ b/base/dialog/dialog-1.2-20130523-smallerminheight.patch.xz
diff --git a/base/dialog/dialog.build b/base/dialog/dialog.build
new file mode 100755
index 0000000..9c9604d
--- /dev/null
+++ b/base/dialog/dialog.build
@@ -0,0 +1,81 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=dialog
+VERSION=1.2.20130523
+BUILD=1
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: dialog (display dialog boxes from shell scripts)
+${NAME}:
+${NAME}: Dialog is a program to present a variety of questions or display
+${NAME}: messages using dialog boxes from a shell script. The Slackware
+${NAME}: package management script "pkgtool" uses this, as do various other
+${NAME}: menu-driven console scripts.
+${NAME}:
+${NAME}: Dialog was originally contributed to Slackware by Savio Lam, and has
+${NAME}: been contributed to by many. Dialog is currently maintained by
+${NAME}: Thomas E. Dickey.
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/conf.d/dialog.conf.new
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=1.2-20130523
+SRCPACK[0]=http://invisible-island.net/datafiles/release/${SRCNAME[0]}-${SRCVERS[0]}.tgz
+SRCCOPY[0]="LGPL21"
+
+build0()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-rpath-hack \
+ --disable-static \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --enable-nls \
+ --enable-widec \
+ --with-ncursesw
+make ${JOBS}
+make install DESTDIR="${PKG}"
+changelog CHANGES
+install.dir ${PKG}${SYS_DIR[conf]}
+install.dat samples/slackware.rc ${PKG}${SYS_DIR[conf]}/dialog.conf.new
+}
diff --git a/base/disks/disks.build b/base/disks/disks.build
new file mode 100755
index 0000000..ec9f9d9
--- /dev/null
+++ b/base/disks/disks.build
@@ -0,0 +1,112 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=disks
+VERSION=$(date +%Y%m%d)
+BUILD=1
+DEPENDS=('glib >= 2.36.0-1' 'udev >= 173-1' 'polkit >= 0.105-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: disks (support for mass storage disk devices)
+${NAME}:
+${NAME}: Utilities and libraries to operate disk mass storage devices such as
+${NAME}: hard drives or CD drives.
+${NAME}:
+${NAME}: This package includes 'libatasmart', 'udisks' as well as the 'hdparm'
+${NAME}: utility.
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=libatasmart
+SRCVERS[0]=0.19
+SRCPACK[0]=http://0pointer.de/public/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+SRCCOPY[0]="LGPL21"
+
+build0()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.in
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --includedir="${SYS_DIR[include]}/atasmart" \
+ --localstatedir="${SYS_DIR[var]}"
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+rm -rf \
+ ${PKG}${SYS_DIR[share]}/vala \
+ ${PKG}${SYS_DIR[doc]}/libatasmart
+}
+
+SRCNAME[1]=hdparm
+SRCVERS[1]=9.43
+SRCPACK[1]=http://downloads.sourceforge.net/project/${SRCNAME[1]}/${SRCNAME[1]}/${SRCNAME[1]}-${SRCVERS[1]}.tar.gz
+
+build1()
+{
+make ${JOBS} OPTS="${FLAGS}"
+make install DESTDIR="${PKG}" binprefix="${SYS_DIR[usr]}" mandir="${SYS_DIR[man]}"
+changelog Changelog
+license LICENSE.TXT
+}
+
+SRCNAME[2]=udisks
+SRCVERS[2]=2.1.0
+SRCPACK[2]=http://udisks.freedesktop.org/releases/${SRCNAME[2]}-${SRCVERS[2]}.tar.bz2
+SRCCOPY[2]="LGPL2 GPL2"
+
+build2()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' udisks/Makefile.in
+sed -i 's|$(udevdir)/rules.d|$(udevdir)|g' data/Makefile.in
+LIBATASMART_CFLAGS="-I${PKG}${SYS_DIR[include]}/atasmart" \
+LIBATASMART_LIBS="-L${PKG}${SYS_DIR[lib]} -latasmart" \
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --libexec="${SYS_DIR[lib]}/exec" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-html-dir="${SYS_DIR[html]}" \
+ --with-udevdir="${SYS_DIR[udevrules]}"
+#FIXME: systemd
+# --with-systemdsystemunitdir="${SYS_DIR[systemdsystemunitdir]}"
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog NEWS
+# No development docs
+rm -rf ${PKG}${SYS_DIR[html]}
+}
diff --git a/base/disks/hdparm-9.43-cflags.patch.xz b/base/disks/hdparm-9.43-cflags.patch.xz
new file mode 100644
index 0000000..a0864f0
--- /dev/null
+++ b/base/disks/hdparm-9.43-cflags.patch.xz
diff --git a/base/disks/libatasmart-0.19-uninitializedvar.patch.xz b/base/disks/libatasmart-0.19-uninitializedvar.patch.xz
new file mode 100644
index 0000000..a4b7b00
--- /dev/null
+++ b/base/disks/libatasmart-0.19-uninitializedvar.patch.xz
diff --git a/base/disks/udisks-2.0.1-french.patch.xz b/base/disks/udisks-2.0.1-french.patch.xz
new file mode 100644
index 0000000..fa4bfeb
--- /dev/null
+++ b/base/disks/udisks-2.0.1-french.patch.xz
diff --git a/base/disks/udisks-2.1.0-udisksdprivdir.patch.xz b/base/disks/udisks-2.1.0-udisksdprivdir.patch.xz
new file mode 100644
index 0000000..fa25b85
--- /dev/null
+++ b/base/disks/udisks-2.1.0-udisksdprivdir.patch.xz
diff --git a/base/ethernet/ethernet.build b/base/ethernet/ethernet.build
new file mode 100755
index 0000000..de2b64d
--- /dev/null
+++ b/base/ethernet/ethernet.build
@@ -0,0 +1,57 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=ethernet
+VERSION=3.10
+BUILD=1
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: ethernet
+${NAME}:
+${NAME}: This package provides the following ethernet network card utilities:
+${NAME}:
+${NAME}:   * ethtool (tune ethernet-based network interfaces)
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=ethtool
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://www.kernel.org/pub/software/network/${SRCNAME[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}"
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog NEWS
+}
diff --git a/base/file/file-5.14-datadir.patch.xz b/base/file/file-5.14-datadir.patch.xz
new file mode 100644
index 0000000..6fdaf35
--- /dev/null
+++ b/base/file/file-5.14-datadir.patch.xz
diff --git a/base/file/file-5.14-moremagic.patch.xz b/base/file/file-5.14-moremagic.patch.xz
new file mode 100644
index 0000000..66520f1
--- /dev/null
+++ b/base/file/file-5.14-moremagic.patch.xz
diff --git a/base/file/file-5.14-short.patch.xz b/base/file/file-5.14-short.patch.xz
new file mode 100644
index 0000000..2fbc54d
--- /dev/null
+++ b/base/file/file-5.14-short.patch.xz
diff --git a/base/file/file.build b/base/file/file.build
new file mode 100755
index 0000000..97751c1
--- /dev/null
+++ b/base/file/file.build
@@ -0,0 +1,66 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=file
+VERSION=5.14
+BUILD=1
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: file (a utility to determine file type)
+${NAME}:
+${NAME}: This is Ian F. Darwin's 'file' utility, used to identify files.
+${NAME}: Christos Zoulas has been file's maintainer since 1994.
+${NAME}:
+${NAME}: Homepage: http://www.darwinsys.com/file
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=ftp://ftp.astron.com/pub/${SRCNAME[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="BSD2"
+
+build0()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --datadir="${SYS_DIR[share]}" \
+ --enable-fsect-man5
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+changelog ChangeLog
+install.dir ${PKG}${SYS_DIR[share]}/magic
+install.dat magic/Magdir/* ${PKG}${SYS_DIR[share]}/magic
+rm -rf \
+ ${PKG}${SYS_DIR[man]}/man4 \
+ ${PKG}${SYS_DIR[share]}/magic.mgc
+}
diff --git a/base/firewall/arptables-v0.0.4-systemd.patch.xz b/base/firewall/arptables-v0.0.4-systemd.patch.xz
new file mode 100644
index 0000000..9482a4e
--- /dev/null
+++ b/base/firewall/arptables-v0.0.4-systemd.patch.xz
diff --git a/base/firewall/conntrack-tools-1.4.1-configfilepaths.patch.xz b/base/firewall/conntrack-tools-1.4.1-configfilepaths.patch.xz
new file mode 100644
index 0000000..2aa9b5c
--- /dev/null
+++ b/base/firewall/conntrack-tools-1.4.1-configfilepaths.patch.xz
diff --git a/base/firewall/conntrack-tools-1.4.1-conntrackdconf.patch.xz b/base/firewall/conntrack-tools-1.4.1-conntrackdconf.patch.xz
new file mode 100644
index 0000000..2ba81d1
--- /dev/null
+++ b/base/firewall/conntrack-tools-1.4.1-conntrackdconf.patch.xz
diff --git a/base/firewall/conntrack-tools-1.4.1-moduledir.patch.xz b/base/firewall/conntrack-tools-1.4.1-moduledir.patch.xz
new file mode 100644
index 0000000..97b4b5d
--- /dev/null
+++ b/base/firewall/conntrack-tools-1.4.1-moduledir.patch.xz
diff --git a/base/firewall/conntrack-tools-1.4.1-systemd.patch.xz b/base/firewall/conntrack-tools-1.4.1-systemd.patch.xz
new file mode 100644
index 0000000..7a9f769
--- /dev/null
+++ b/base/firewall/conntrack-tools-1.4.1-systemd.patch.xz
diff --git a/base/firewall/conntrack-tools-1.4.1-tmpfilesd.patch.xz b/base/firewall/conntrack-tools-1.4.1-tmpfilesd.patch.xz
new file mode 100644
index 0000000..62691c2
--- /dev/null
+++ b/base/firewall/conntrack-tools-1.4.1-tmpfilesd.patch.xz
diff --git a/base/firewall/firewall.build b/base/firewall/firewall.build
new file mode 100755
index 0000000..3216c74
--- /dev/null
+++ b/base/firewall/firewall.build
@@ -0,0 +1,314 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=firewall
+VERSION=$(date '+%Y%m%d')
+BUILD=1
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: firewall
+${NAME}:
+${NAME}: Tools and libraries for network firewalls.
+${NAME}:
+${NAME}: Homepage: http://www.netfilter.org
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/iptables/conntrackd.conf.new
+config etc/iptables/ipset.conf.new
+config etc/iptables/arptables.conf.new
+EOF
+
+# Sources
+
+SRCNAME[0]=libmnl
+SRCVERS[0]=1.0.3
+SRCPACK[0]=http://ftp.netfilter.org/pub/${SRCNAME[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.bz2
+SRCCOPY[0]="LGPL21"
+
+configure()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.in
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}/iptables" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ ${*}
+}
+
+build0()
+{
+configure
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+}
+
+SRCNAME[1]=libnfnetlink
+SRCVERS[1]=1.0.1
+SRCPACK[1]=http://ftp.netfilter.org/pub/${SRCNAME[1]}/${SRCNAME[1]}-${SRCVERS[1]}.tar.bz2
+SRCCOPY[1]="GPL2"
+
+build1()
+{
+configure
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+}
+
+SRCNAME[2]=libnetfilter_log
+SRCVERS[2]=1.0.1
+SRCPACK[2]=http://ftp.netfilter.org/pub/${SRCNAME[2]}/${SRCNAME[2]}-${SRCVERS[2]}.tar.bz2
+SRCCOPY[2]="GPL2"
+
+build2()
+{
+LIBNFNETLINK_CFLAGS="-I${PKG}${SYS_DIR[include]}" \
+LIBNFNETLINK_LIBS="-L${PKG}${SYS_DIR[lib]} -lnfnetlink" \
+configure
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+}
+
+SRCNAME[3]=libnetfilter_conntrack
+SRCVERS[3]=1.0.3
+SRCPACK[3]=http://ftp.netfilter.org/pub/${SRCNAME[3]}/${SRCNAME[3]}-${SRCVERS[3]}.tar.bz2
+SRCCOPY[3]="GPL2"
+
+build3()
+{
+LIBMNL_CFLAGS="-I${PKG}${SYS_DIR[include]}" \
+LIBMNL_LIBS="-L${PKG}${SYS_DIR[lib]} -lmnl" \
+LIBNFNETLINK_CFLAGS="-I${PKG}${SYS_DIR[include]}" \
+LIBNFNETLINK_LIBS="-L${PKG}${SYS_DIR[lib]} -lnfnetlink" \
+configure
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+}
+
+SRCNAME[4]=libnetfilter_queue
+SRCVERS[4]=1.0.2
+SRCPACK[4]=http://ftp.netfilter.org/pub/${SRCNAME[4]}/${SRCNAME[4]}-${SRCVERS[4]}.tar.bz2
+SRCCOPY[4]="GPL2"
+
+build4()
+{
+LIBMNL_CFLAGS="-I${PKG}${SYS_DIR[include]}" \
+LIBMNL_LIBS="-L${PKG}${SYS_DIR[lib]} -lmnl" \
+LIBNFNETLINK_CFLAGS="-I${PKG}${SYS_DIR[include]}" \
+LIBNFNETLINK_LIBS="-L${PKG}${SYS_DIR[lib]} -lnfnetlink" \
+configure
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+}
+
+SRCNAME[5]=libnetfilter_acct
+SRCVERS[5]=1.0.2
+SRCPACK[5]=http://ftp.netfilter.org/pub/${SRCNAME[5]}/${SRCNAME[5]}-${SRCVERS[5]}.tar.bz2
+SRCCOPY[5]="GPL2"
+
+build5()
+{
+LIBMNL_CFLAGS="-I${PKG}${SYS_DIR[include]}" \
+LIBMNL_LIBS="-L${PKG}${SYS_DIR[lib]} -lmnl" \
+configure
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+}
+
+SRCNAME[6]=libnetfilter_cthelper
+SRCVERS[6]=1.0.0
+SRCPACK[6]=http://ftp.netfilter.org/pub/${SRCNAME[6]}/${SRCNAME[6]}-${SRCVERS[6]}.tar.bz2
+SRCCOPY[6]="GPL2"
+
+build6()
+{
+LIBMNL_CFLAGS="-I${PKG}${SYS_DIR[include]}" \
+LIBMNL_LIBS="-L${PKG}${SYS_DIR[lib]} -lmnl" \
+configure
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+}
+
+SRCNAME[7]=libnetfilter_cttimeout
+SRCVERS[7]=1.0.0
+SRCPACK[7]=http://ftp.netfilter.org/pub/${SRCNAME[7]}/${SRCNAME[7]}-${SRCVERS[7]}.tar.bz2
+SRCCOPY[7]="GPL2"
+
+build7()
+{
+LIBMNL_CFLAGS="-I${PKG}${SYS_DIR[include]}" \
+LIBMNL_LIBS="-L${PKG}${SYS_DIR[lib]} -lmnl" \
+configure
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+}
+
+SRCNAME[8]=nfacct
+SRCVERS[8]=1.0.1
+SRCPACK[8]=http://ftp.netfilter.org/pub/${SRCNAME[8]}/${SRCNAME[8]}-${SRCVERS[8]}.tar.bz2
+SRCCOPY[8]="GPL2"
+
+build8()
+{
+LIBMNL_CFLAGS="-I${PKG}${SYS_DIR[include]}" \
+LIBMNL_LIBS="-L${PKG}${SYS_DIR[lib]} -lmnl" \
+LIBNETFILTER_ACCT_CFLAGS="-I${PKG}${SYS_DIR[include]}" \
+LIBNETFILTER_ACCT_LIBS="-L${PKG}${SYS_DIR[lib]} -lnetfilter_acct" \
+configure
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+}
+
+SRCNAME[9]=conntrack-tools
+SRCVERS[9]=1.4.1
+SRCPACK[9]=http://ftp.netfilter.org/pub/${SRCNAME[9]}/${SRCNAME[9]}-${SRCVERS[9]}.tar.bz2
+SRCCOPY[9]="GPL2"
+
+build9()
+{
+rm -f ${PKG}${SYS_DIR[lib]}/*.la
+LIBMNL_CFLAGS="-I${PKG}${SYS_DIR[include]}" \
+LIBMNL_LIBS="-L${PKG}${SYS_DIR[lib]} -lmnl" \
+LIBNFNETLINK_CFLAGS="-I${PKG}${SYS_DIR[include]}" \
+LIBNFNETLINK_LIBS="-L${PKG}${SYS_DIR[lib]} -lnfnetlink" \
+LIBNETFILTER_CONNTRACK_CFLAGS="-I${PKG}${SYS_DIR[include]}" \
+LIBNETFILTER_CONNTRACK_LIBS="-L${PKG}${SYS_DIR[lib]} -lnetfilter_conntrack" \
+LIBNETFILTER_CTTIMEOUT_CFLAGS="-I${PKG}${SYS_DIR[include]}" \
+LIBNETFILTER_CTTIMEOUT_LIBS="-L${PKG}${SYS_DIR[lib]} -lnetfilter_cttimeout" \
+LIBNETFILTER_CTHELPER_CFLAGS="-I${PKG}${SYS_DIR[include]}" \
+LIBNETFILTER_CTHELPER_LIBS="-L${PKG}${SYS_DIR[lib]} -lnetfilter_cthelper" \
+LIBNETFILTER_QUEUE_CFLAGS="-I${PKG}${SYS_DIR[include]}" \
+LIBNETFILTER_QUEUE_LIBS="-L${PKG}${SYS_DIR[lib]} -lnetfilter_queue" \
+configure
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+doc AUTHORS
+install.dir ${PKG}${SYS_DIR[systemdsystemunitdir]}
+install.dat conntrackd.service ${PKG}${SYS_DIR[systemdsystemunitdir]}
+install.dir ${PKG}${SYS_DIR[etc]}/iptables
+install.cfg doc/helper/conntrackd.conf ${PKG}${SYS_DIR[etc]}/iptables/conntrackd.conf.new
+install.dir ${PKG}${SYS_DIR[etc]}/tmpfiles.d
+install.dat conntrackd.conf.tmpfiles ${PKG}${SYS_DIR[etc]}/tmpfiles.d/conntrackd.conf
+}
+
+SRCNAME[10]=iptables
+SRCVERS[10]=1.4.18
+SRCPACK[10]=http://ftp.netfilter.org/pub/${SRCNAME[10]}/${SRCNAME[10]}-${SRCVERS[10]}.tar.bz2
+SRCCOPY[10]="GPL2"
+
+build10()
+{
+sed -i 's|${libdir}/pkgconfig|${datarootdir}/pkgconfig|g' configure
+sed -i 's|${datadir}/xtables|${datadir}/net|g' configure
+rm include/linux/types.h
+libnfnetlink_CFLAGS="-I${PKG}${SYS_DIR[include]}" \
+libnfnetlink_LIBS="-L${PKG}${SYS_DIR[lib]} -lnfnetlink" \
+LDFLAGS="-L${PKG}${SYS_DIR[lib]}" \
+configure \
+ --enable-devel \
+ --enable-libipq \
+ --with-xtlibdir=${SYS_DIR[lib]}/plugins/xtables
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+sed -i "s|@SYSTEMDSYSTEMSCRIPTDIR@|${SYS_DIR[systemdsystemscriptdir]}|g" ip{,6}tables.service
+install.dir ${PKG}${SYS_DIR[systemdsystemunitdir]}
+install.dat ip{,6}tables.service ${PKG}${SYS_DIR[systemdsystemunitdir]}
+install.dir ${PKG}${SYS_DIR[systemdsystemscriptdir]}
+install.bin iptables-flush ${PKG}${SYS_DIR[systemdsystemscriptdir]}
+install.dir ${PKG}${SYS_DIR[etc]}/iptables
+install.dat rules/{empty,simple_firewall}.rules ${PKG}${SYS_DIR[etc]}/iptables
+install.dir ${PKG}${SYS_DIR[var]}/lib/ip{,6}tables
+install.dat rules/empty-{filter,mangle,nat,raw,security}.rules ${PKG}${SYS_DIR[var]}/lib/iptables
+install.dat rules/empty-{filter,mangle,nat,raw,security}.rules ${PKG}${SYS_DIR[var]}/lib/ip6tables
+}
+
+SRCNAME[11]=ipset
+SRCVERS[11]=6.17
+SRCPACK[11]=http://ftp.netfilter.org/pub/${SRCNAME[11]}/${SRCNAME[11]}-${SRCVERS[11]}.tar.bz2
+SRCCOPY[11]="GPL2"
+
+build11()
+{
+libmnl_CFLAGS="-I${PKG}${SYS_DIR[include]}" \
+libmnl_LIBS="-L${PKG}${SYS_DIR[lib]} -lmnl" \
+LDFLAGS="-L${PKG}${SYS_DIR[lib]}" \
+configure \
+ --with-kmod=no
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+changelog ChangeLog
+sed -i "s|@SYSTEMDSYSTEMSCRIPTDIR@|${SYS_DIR[systemdsystemscriptdir]}|g" ipset.service
+install.dir ${PKG}${SYS_DIR[etc]}/iptables
+touch ${PKG}${SYS_DIR[etc]}/iptables/ipset.conf.new
+install.dir ${PKG}${SYS_DIR[share]}/pkgconfig
+install.dat lib/libipset.pc ${PKG}${SYS_DIR[share]}/pkgconfig
+install.dir ${PKG}${SYS_DIR[systemdsystemunitdir]}
+install.dat ipset.service ${PKG}${SYS_DIR[systemdsystemunitdir]}
+install.dir ${PKG}${SYS_DIR[systemdsystemscriptdir]}
+install.bin ipset-systemd ${PKG}${SYS_DIR[systemdsystemscriptdir]}/ipset
+install.dir ${PKG}${SYS_DIR[bashcompletiondir]}
+install.dat utils/ipset_bash_completion/ipset_bash_completion \
+ ${PKG}${SYS_DIR[bashcompletiondir]}/ipset
+}
+
+SRCNAME[12]=arptables
+SRCVERS[12]=v0.0.4
+SRCPACK[12]=${URL[sf]}/ebtables/arptables/${SRCNAME[12]}-${SRCVERS[12]}/${SRCNAME[12]}-${SRCVERS[12]}.tar.gz
+SRCCOPY[12]="GPL2"
+
+build12()
+{
+make ${JOBS}
+make install DESTDIR="${PKG}" \
+ PREFIX="${SYS_DIR[usr]}" MANDIR="${SYS_DIR[man]}"
+sed -i "s|@SYSTEMDSYSTEMSCRIPTDIR@|${SYS_DIR[systemdsystemscriptdir]}|g" arptables.service
+install.dir ${PKG}${SYS_DIR[etc]}/iptables
+touch ${PKG}${SYS_DIR[etc]}/iptables/arptables.conf.new
+install.dir ${PKG}${SYS_DIR[systemdsystemunitdir]}
+install.dat arptables.service ${PKG}${SYS_DIR[systemdsystemunitdir]}
+install.dir ${PKG}${SYS_DIR[systemdsystemscriptdir]}
+install.bin arptables.systemd ${PKG}${SYS_DIR[systemdsystemscriptdir]}/arptables
+rm -rf ${PKG}${SYS_DIR[etc]}/rc.d
+}
diff --git a/base/firewall/ipset-6.17-mnllinking.patch.xz b/base/firewall/ipset-6.17-mnllinking.patch.xz
new file mode 100644
index 0000000..a4cc24e
--- /dev/null
+++ b/base/firewall/ipset-6.17-mnllinking.patch.xz
diff --git a/base/firewall/ipset-6.17-systemd.patch.xz b/base/firewall/ipset-6.17-systemd.patch.xz
new file mode 100644
index 0000000..2ef4961
--- /dev/null
+++ b/base/firewall/ipset-6.17-systemd.patch.xz
diff --git a/base/firewall/iptables-1.4.18-extensioncppflags.patch.xz b/base/firewall/iptables-1.4.18-extensioncppflags.patch.xz
new file mode 100644
index 0000000..4750602
--- /dev/null
+++ b/base/firewall/iptables-1.4.18-extensioncppflags.patch.xz
diff --git a/base/firewall/iptables-1.4.18-rules.patch.xz b/base/firewall/iptables-1.4.18-rules.patch.xz
new file mode 100644
index 0000000..9b9b2c3
--- /dev/null
+++ b/base/firewall/iptables-1.4.18-rules.patch.xz
diff --git a/base/firewall/iptables-1.4.18-systemd.patch.xz b/base/firewall/iptables-1.4.18-systemd.patch.xz
new file mode 100644
index 0000000..dbb8084
--- /dev/null
+++ b/base/firewall/iptables-1.4.18-systemd.patch.xz
diff --git a/base/firewire/firewire.build b/base/firewire/firewire.build
new file mode 100755
index 0000000..3afddf8
--- /dev/null
+++ b/base/firewire/firewire.build
@@ -0,0 +1,108 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=firewire
+VERSION=$(date +%Y%m%d)
+BUILD=1
+OPTDEPENDS=('usb >= 1.0.15-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: firewire
+${NAME}:
+${NAME}: FireWire (IEEE 1394) support libraries and tools. FireWire is a
+${NAME}: serial bus interface for high-speed communications and isochronous
+${NAME}: real-time data tranfer which is used by many camcorders.
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+configure()
+{
+sed -i 's|@libdir@/pkgconfig|@datarootdir@/pkgconfig|g' Makefile.{in,am}
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.{in,am}
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ ${*}
+make ${JOBS}
+make install DESTDIR="${PKG}"
+}
+
+SRCNAME[0]=libraw1394
+SRCVERS[0]=2.1.0
+SRCPACK[0]=http://www.kernel.org/pub/linux/libs/ieee1394/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+SRCCOPY[0]="LGPL21"
+
+build0()
+{
+configure
+doc AUTHORS
+changelog NEWS
+}
+
+SRCNAME[1]=libiec61883
+SRCVERS[1]=1.2.0
+SRCPACK[1]=http://www.kernel.org/pub/linux/libs/ieee1394/${SRCNAME[1]}-${SRCVERS[1]}.tar.xz
+SRCCOPY[1]="LGPL21"
+
+build1()
+{
+LIBRAW1394_CFLAGS="-I${PKG}${SYS_DIR[include]}" \
+LIBRAW1394_LIBS="-L${PKG}${SYS_DIR[lib]} -lraw1394" \
+configure
+doc AUTHORS
+changelog NEWS
+}
+
+SRCNAME[2]=libdc1394
+SRCVERS[2]=2.2.1
+SRCPACK[2]=${URL[sf]}/libdc1394/libdc1394-2/${SRCVERS[2]}/${SRCNAME[2]}-${SRCVERS[2]}.tar.gz
+SRCCOPY[2]="LGPL21"
+
+build2()
+{
+configure
+doc AUTHORS
+changelog NEWS
+}
+
+SRCNAME[3]=libavc1394
+SRCVERS[3]=0.5.4
+SRCPACK[3]=${URL[sf]}//${SRCVERS[3]}/${SRCNAME[3]}-${SRCVERS[3]}.tar.gz
+SRCCOPY[3]="LGPL21"
+
+build3()
+{
+LIBRAW1394_CFLAGS="-I${PKG}${SYS_DIR[include]}" \
+LIBRAW1394_LIBS="-L${PKG}${SYS_DIR[lib]} -lraw1394" \
+configure
+doc AUTHORS
+changelog NEWS
+}
diff --git a/base/framebuffer/fbcat-0.3-man.patch.xz b/base/framebuffer/fbcat-0.3-man.patch.xz
new file mode 100644
index 0000000..bc544c9
--- /dev/null
+++ b/base/framebuffer/fbcat-0.3-man.patch.xz
diff --git a/base/framebuffer/fbida-2.09-cflags.patch.xz b/base/framebuffer/fbida-2.09-cflags.patch.xz
new file mode 100644
index 0000000..646d84c
--- /dev/null
+++ b/base/framebuffer/fbida-2.09-cflags.patch.xz
diff --git a/base/framebuffer/fbida-2.09-config.patch.xz b/base/framebuffer/fbida-2.09-config.patch.xz
new file mode 100644
index 0000000..cf5f17e
--- /dev/null
+++ b/base/framebuffer/fbida-2.09-config.patch.xz
diff --git a/base/framebuffer/fbida-2.09-extraldflags.patch.xz b/base/framebuffer/fbida-2.09-extraldflags.patch.xz
new file mode 100644
index 0000000..0e96eb1
--- /dev/null
+++ b/base/framebuffer/fbida-2.09-extraldflags.patch.xz
diff --git a/base/framebuffer/fbida-2.09-fontsutf8.patch.xz b/base/framebuffer/fbida-2.09-fontsutf8.patch.xz
new file mode 100644
index 0000000..877ee5e
--- /dev/null
+++ b/base/framebuffer/fbida-2.09-fontsutf8.patch.xz
diff --git a/base/framebuffer/fbida-2.09-nocurl.patch.xz b/base/framebuffer/fbida-2.09-nocurl.patch.xz
new file mode 100644
index 0000000..269b205
--- /dev/null
+++ b/base/framebuffer/fbida-2.09-nocurl.patch.xz
diff --git a/base/framebuffer/fbset-2.1-fbmodes.patch.xz b/base/framebuffer/fbset-2.1-fbmodes.patch.xz
new file mode 100644
index 0000000..d71cc3f
--- /dev/null
+++ b/base/framebuffer/fbset-2.1-fbmodes.patch.xz
diff --git a/base/framebuffer/fbset-2.1-kernelfbh.patch.xz b/base/framebuffer/fbset-2.1-kernelfbh.patch.xz
new file mode 100644
index 0000000..cc1c583
--- /dev/null
+++ b/base/framebuffer/fbset-2.1-kernelfbh.patch.xz
diff --git a/base/framebuffer/fbset-2.1-makefile.patch.xz b/base/framebuffer/fbset-2.1-makefile.patch.xz
new file mode 100644
index 0000000..ba346f8
--- /dev/null
+++ b/base/framebuffer/fbset-2.1-makefile.patch.xz
diff --git a/base/framebuffer/fbset-2.1-manpages.patch.xz b/base/framebuffer/fbset-2.1-manpages.patch.xz
new file mode 100644
index 0000000..469ffad
--- /dev/null
+++ b/base/framebuffer/fbset-2.1-manpages.patch.xz
diff --git a/base/framebuffer/fbset-2.1-newaccels.patch.xz b/base/framebuffer/fbset-2.1-newaccels.patch.xz
new file mode 100644
index 0000000..7813cea
--- /dev/null
+++ b/base/framebuffer/fbset-2.1-newaccels.patch.xz
diff --git a/base/framebuffer/fbset-2.1-rgbkeyword.patch.xz b/base/framebuffer/fbset-2.1-rgbkeyword.patch.xz
new file mode 100644
index 0000000..ed98f97
--- /dev/null
+++ b/base/framebuffer/fbset-2.1-rgbkeyword.patch.xz
diff --git a/base/framebuffer/fbset-2.1-usage.patch.xz b/base/framebuffer/fbset-2.1-usage.patch.xz
new file mode 100644
index 0000000..c11b17b
--- /dev/null
+++ b/base/framebuffer/fbset-2.1-usage.patch.xz
diff --git a/base/framebuffer/fbset-2.1-warnings.patch.xz b/base/framebuffer/fbset-2.1-warnings.patch.xz
new file mode 100644
index 0000000..97ec63a
--- /dev/null
+++ b/base/framebuffer/fbset-2.1-warnings.patch.xz
diff --git a/base/framebuffer/framebuffer.build b/base/framebuffer/framebuffer.build
new file mode 100755
index 0000000..c3c8ce6
--- /dev/null
+++ b/base/framebuffer/framebuffer.build
@@ -0,0 +1,98 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=framebuffer
+VERSION=$(date +%Y%m%d)
+BUILD=1
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: framebuffer
+${NAME}:
+${NAME}: The Linux framebuffer makes it possible to use the console in 
+${NAME}: graphics mode which allows among other things to have large
+${NAME}: consoles. This package includes the following framebuffer utilities:
+${NAME}:
+${NAME}:   * fbset (view and change framebuffer settings)
+${NAME}:   * fbi (display images)
+${NAME}:   * fbcat (dump the console screen to a file)
+${NAME}:
+${NAME}:
+EOF
+
+cat > ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/fb.modes.new
+EOF
+
+# Sources
+
+SRCNAME[0]=fbset
+SRCVERS[0]=2.1
+SRCPACK[0]=http://users.telenet.be/geertu/Linux/fbdev/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+make ${JOBS} CFLAGS="${FLAGS}"
+make install DESTDIR="${PKG}" PREFIX="${SYS_DIR[usr]}" MANDIR="${SYS_DIR[man]}"
+doc etc/fb.modes.{Falcon,NTSC,PAL,ATI}
+install.dir ${PKG}${SYS_DIR[etc]}
+install.cfg etc/fb.modes.ATI ${PKG}${SYS_DIR[etc]}/fb.modes.new
+}
+
+SRCNAME[1]=fbida
+SRCVERS[1]=2.09
+SRCPACK[1]=http://dl.bytesex.org/releases/fbida/${SRCNAME[1]}-${SRCVERS[1]}.tar.gz
+SRCCOPY[1]="GPL2"
+
+build1()
+{
+make ${JOBS} verbose=yes OPTS="${FLAGS}"
+make install DESTDIR="${PKG}" prefix="${SYS_DIR[usr]}"
+changelog Changes
+rm -f \
+ ${PKG}${SYS_DIR[bin]}/{fbgs,exiftran} \
+ ${PKG}${SYS_DIR[man]}/man1/{fbgs,exiftran}.1
+}
+
+SRCNAME[2]=fbcat
+SRCVERS[2]=0.3
+SRCPACK[2]=http://fbcat.googlecode.com/files/${SRCNAME[2]}-${SRCVERS[2]}.tar.gz
+SRCCOPY[2]="GPL2"
+
+build2()
+{
+make ${JOBS} CFLAGS="${FLAGS}"
+changelog doc/changelog
+install.dir ${PKG}${SYS_DIR[bin]}
+install.bin fb{cat,grab} ${PKG}${SYS_DIR[bin]}
+install.dir ${PKG}${SYS_DIR[man]}/man1
+install.man doc/fb{cat,grab}.1 ${PKG}${SYS_DIR[man]}/man1
+}
diff --git a/base/fs_btr/fs_btr.build b/base/fs_btr/fs_btr.build
new file mode 100755
index 0000000..6023d5d
--- /dev/null
+++ b/base/fs_btr/fs_btr.build
@@ -0,0 +1,51 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=fs_btr
+CHECKOUT=20130318
+VERSION=0.20.${CHECKOUT}
+BUILD=1
+OPTDEPENDS=('fs_ext >= 1.42.7-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: fs_btr (btrfs filesystem utilities)
+${NAME}:
+${NAME}: User space utilities for the 'btrfs' filesystem.
+${NAME}:
+${NAME}: Homepage: http://btrfs.wiki.kernel.org
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=btrfs-progs
+SRCVERS[0]=${CHECKOUT}
+SRCPACK[0]=${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+sed -i 's|$(prefix)/man|$(prefix)/share/man|g' man/Makefile
+make ${JOBS} CFLAGS="${FLAGS}" V=1
+make install DESTDIR="${PKG}" prefix="${SYS_DIR[usr]}" bindir="${SYS_DIR[sbin]}"
+gunzip ${PKG}${SYS_DIR[man]}/man?/*.?.gz
+chmod 0644 ${PKG}${SYS_DIR[lib]}/*.a
+}
diff --git a/base/fs_cifs/fs_cifs.build b/base/fs_cifs/fs_cifs.build
new file mode 100755
index 0000000..137cad4
--- /dev/null
+++ b/base/fs_cifs/fs_cifs.build
@@ -0,0 +1,59 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=fs_cifs
+VERSION=6.0
+BUILD=1
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: fs_cifs
+${NAME}:
+${NAME}: Support tools for CIFS (Common Internet File System) a file sharing
+${NAME}: protocol used to request file and print services over a network. It
+${NAME}: is based on the SMB (Server Message Block) protocol widely in use by
+${NAME}: personal computers and workstations running a wide variety of
+${NAME}: operating systems.
+${NAME}:
+${NAME}: Homepage: https://wiki.samba.org/index.php/LinuxCIFS_utils
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=cifs-utils
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=ftp://ftp.samba.org/pub/linux-cifs/cifs-utils/${SRCNAME[0]}-${SRCVERS[0]}.tar.bz2
+SRCCOPY[0]="GPL3"
+
+build0()
+{
+ROOTSBINDIR="${SYS_DIR[sbin]}" \
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-libcap-ng=yes
+#FIXME: systemd --enable-systemd
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS
+}
diff --git a/base/fs_exfat/exfat-utils-1.0.1-nodebug.patch.xz b/base/fs_exfat/exfat-utils-1.0.1-nodebug.patch.xz
new file mode 100644
index 0000000..a286ce7
--- /dev/null
+++ b/base/fs_exfat/exfat-utils-1.0.1-nodebug.patch.xz
diff --git a/base/fs_exfat/fs_exfat.build b/base/fs_exfat/fs_exfat.build
new file mode 100755
index 0000000..247a284
--- /dev/null
+++ b/base/fs_exfat/fs_exfat.build
@@ -0,0 +1,65 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=fs_exfat
+VERSION=1.0.1
+BUILD=1
+DEPENDS=('fuse >= 2.9.2-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: fs_exfat
+${NAME}:
+${NAME}: A free exFAT file system implementation which uses FUSE.
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=fuse-exfat
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://exfat.googlecode.com/files/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="GPL3"
+
+build0()
+{
+scons CFLAGS="${FLAGS}" ${JOBS} install DESTDIR="${PKG}${SYS_DIR[sbin]}"
+changelog ChangeLog
+install.dir ${PKG}${SYS_DIR[man]}/man8
+install.man fuse/mount.exfat-fuse.8 ${PKG}${SYS_DIR[man]}/man8
+echo ".so man8/mount.exfat-fuse.8" > ${PKG}${SYS_DIR[man]}/man8/mount.exfat.8
+}
+
+SRCNAME[1]=exfat-utils
+SRCVERS[1]=${VERSION}
+SRCPACK[1]=http://exfat.googlecode.com/files/${SRCNAME[1]}-${SRCVERS[1]}.tar.gz
+SRCCOPY[1]="GPL3"
+
+build1()
+{
+scons CFLAGS="${FLAGS}" ${JOBS} install DESTDIR="${PKG}${SYS_DIR[sbin]}"
+changelog ChangeLog
+install.dir ${PKG}${SYS_DIR[man]}/man8
+install.man */*.8 ${PKG}${SYS_DIR[man]}/man8
+echo ".so man8/exfatfsck.8" > ${PKG}${SYS_DIR[man]}/man8/fsck.exfat.8
+echo ".so man8/mkexfatfs.8" > ${PKG}${SYS_DIR[man]}/man8/mkfs.exfat.8
+}
diff --git a/base/fs_exfat/fuse-exfat-1.0.1-nodebug.patch.xz b/base/fs_exfat/fuse-exfat-1.0.1-nodebug.patch.xz
new file mode 100644
index 0000000..8abd16e
--- /dev/null
+++ b/base/fs_exfat/fuse-exfat-1.0.1-nodebug.patch.xz
diff --git a/base/fs_ext/fs_ext.build b/base/fs_ext/fs_ext.build
new file mode 100755
index 0000000..fc05ed8
--- /dev/null
+++ b/base/fs_ext/fs_ext.build
@@ -0,0 +1,124 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=fs_ext
+VERSION=1.42.7
+BUILD=1
+OPTIONS="noinfoz"
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: fs_ext (extended filesystems utilities)
+${NAME}:
+${NAME}: Utilities needed to create and maintain ext2, ext3 and ext4
+${NAME}: filesystems.
+${NAME}:
+${NAME}: These utilities were written by Remy Card (the developer and
+${NAME}: maintainer of the ext2 fs) and Theodore T'so.
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+install_info()
+{
+  for file in "\${*}"; do
+    if [ -x usr/bin/install-info ]; then
+      usr/bin/install-info --info-dir=usr/share/info usr/share/info/\${file}.info.xz 2> /dev/null
+    fi
+  done
+}
+
+config etc/mke2fs.conf.new
+
+# Install texinfo files
+
+install_info libext2fs
+EOF
+
+# Sources
+
+SRCNAME[0]=e2fsprogs
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://kernel.org/pub/linux/kernel/people/tytso/e2fsprogs/v${SRCVERS[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+SRCCOPY[0]="GPL2 LGPL2"
+
+build0()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datadir)/pkgconfig|g' */*/Makefile.in
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-rpath \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --infodir="${SYS_DIR[info]}" \
+ --docdir="${SYS_DIR[doc]}/${SRCNAME[0]}-${SRCVERS[0]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --enable-elf-shlibs \
+ --disable-libblkid \
+ --disable-libuuid \
+ --disable-uuidd
+make ${JOBS} V=1
+make install install-libs DESTDIR="${PKG}"
+changelog RELEASE-NOTES
+mv \
+ ${PKG}${SYS_DIR[etc]}/mke2fs.conf \
+ ${PKG}${SYS_DIR[etc]}/mke2fs.conf.new
+(
+  for fstype in ext2 ext3 ext4 ext4dev; do
+    cd ${PKG}${SYS_DIR[sbin]}
+    rm -f fsck.${fstype} mkfs.${fstype}
+    ln -sf mke2fs mkfs.${fstype}
+    ln -sf e2fsck fsck.${fstype}
+    cd ${PKG}${SYS_DIR[man]}/man8
+    rm -f fsck.${fstype} mkfs.${fstype}
+    echo ".so man8/mke2fs.8" > mkfs.${fstype}
+    echo ".so man8/e2fsck.8" > fsck.${fstype}
+  done
+)
+(
+  cd ${PKG}${SYS_DIR[sbin]}
+  rm -f e2label findfs
+  ln -sf tune2fs e2label
+  ln -sf mke2fs mke3fs
+  ln -sf mke2fs mke4fs
+  cd ${PKG}${SYS_DIR[man]}/man8
+  echo ".so man8/mke2fs.8" > mke3fs.8
+  echo ".so man8/mke2fs.8" > mke4fs.8
+)
+sed -i -e 's/^AWK=.*/AWK=awk/' "${PKG}/usr/bin/compile_et"
+sed -i -e 's#^SS_DIR=.*#SS_DIR="/usr/share/ss"#' "${PKG}/usr/bin/mk_cmds"
+sed -i -e 's#^ET_DIR=.*#ET_DIR="/usr/share/et"#' "${PKG}/usr/bin/compile_et"
+}
diff --git a/base/fs_fat/fatsort-1.1.331-man8.patch.xz b/base/fs_fat/fatsort-1.1.331-man8.patch.xz
new file mode 100644
index 0000000..24d05fd
--- /dev/null
+++ b/base/fs_fat/fatsort-1.1.331-man8.patch.xz
diff --git a/base/fs_fat/fs_fat.build b/base/fs_fat/fs_fat.build
new file mode 100755
index 0000000..5daad48
--- /dev/null
+++ b/base/fs_fat/fs_fat.build
@@ -0,0 +1,72 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=fs_fat
+VERSION=3.0.18
+BUILD=1
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: fs_fat (tools for working with FAT filesystems)
+${NAME}:
+${NAME}: Utilities for creating FAT filesystems (mkdosfs), and for checking
+${NAME}: and repairing them (dosfsck).
+${NAME}:
+${NAME}: Homepage: http://www.daniel-baumann.ch/software/dosfstools
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=dosfstools
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://daniel-baumann.ch/files/software/dosfstools/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+SRCCOPY[0]="GPL3"
+
+build0()
+{
+make ${JOBS} OPTFLAGS="${FLAGS}"
+make install DESTDIR="${PKG}" PREFIX="${SYS_DIR[usr]}" MANDIR="${SYS_DIR[man]}"
+changelog ChangeLog
+(
+  cd ${PKG}${SYS_DIR[man]}/man8
+  rm -f {mkfs,fsck}.{msdos,vfat}.8
+  rm -f {mkdosfs,dosfslabel,dosfsck}.8
+  echo ".so man8/mkfs.fat.8" > mkfs.msdos.8
+  echo ".so man8/mkfs.fat.8" > mkfs.vfat.8
+  echo ".so man8/mkfs.fat.8" > mkdosfs.8
+  echo ".so man8/fsck.fat.8" > fsck.msdos.8
+  echo ".so man8/fsck.fat.8" > fsck.vfat.8
+  echo ".so man8/fsck.fat.8" > dosfsck.8
+  echo ".so man8/fatlabel.8" > dosfslabel.8
+)
+rm -rf ${PKG}${SYS_DIR[doc]}/${SRCNAME[0]}
+}
+
+SRCNAME[1]=fatsort
+SRCVERS[1]=1.1.331
+SRCPACK[1]=${URL[sf]}/fatsort/${SRCNAME[1]}-${SRCVERS[1]}.tar.gz
+SRCCOPY[1]="GPL2"
+
+build1()
+{
+make ${JOBS} CFLAGS+="${FLAGS}"
+make install DESTDIR="${PKG}" MANDIR="${SYS_DIR[man]}/man8" SBINDIR="${SYS_DIR[sbin]}"
+changelog CHANGES
+}
diff --git a/base/fs_iso/fs_iso.build b/base/fs_iso/fs_iso.build
new file mode 100755
index 0000000..ae01df2
--- /dev/null
+++ b/base/fs_iso/fs_iso.build
@@ -0,0 +1,60 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=fs_iso
+VERSION=20080229
+BUILD=2
+DEPENDS=('fuse >= 2.9.2-1' 'glib >= 2.36.0-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: fs_iso
+${NAME}:
+${NAME}: FuseISO is a FUSE module to mount ISO filesystem images (.iso, .nrg,
+${NAME}: .bin, .mdf and .img files). It currently supports plain ISO9660
+${NAME}: level 1 and 2, Rock Ridge, Joliet and zisofs.
+${NAME}:
+${NAME}: Homepage: http://fuseiso.sf.net
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=fuseiso
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}"\
+ --localstatedir="${SYS_DIR[var]}"
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog ChangeLog
+}
diff --git a/base/fs_iso/fuseiso-20080229-largeiso.patch.xz b/base/fs_iso/fuseiso-20080229-largeiso.patch.xz
new file mode 100644
index 0000000..a8e941e
--- /dev/null
+++ b/base/fs_iso/fuseiso-20080229-largeiso.patch.xz
diff --git a/base/fs_ntfs/fs_ntfs.build b/base/fs_ntfs/fs_ntfs.build
new file mode 100755
index 0000000..6ca3666
--- /dev/null
+++ b/base/fs_ntfs/fs_ntfs.build
@@ -0,0 +1,88 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=fs_ntfs
+VERSION=2013.1.13
+BUILD=2
+DEPENDS=('fuse >= 2.9.2-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: fs_ntfs (NTFS file system)
+${NAME}:
+${NAME}: This package provides support for the NTFS file system. It allows
+${NAME}: accessing Windows NT, 2000, XP, 2003 and Vista partitions.
+${NAME}:
+${NAME}: Homepage: http://www.ntfs-3g.org
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=ntfs-3g_ntfsprogs
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://tuxera.com/opensource/${SRCNAME[0]}-${SRCVERS[0]}.tgz
+SRCCOPY[0]="GPL2 LGPL2"
+
+build0()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datadir)/pkgconfig|g' configure
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --exec-prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-fuse=external \
+ --enable-extras \
+ --enable-crypto \
+ --disable-ldconfig
+make ${JOBS}
+make install DESTDIR="${PKG}" LIBTOOL="${SYS_DIR[bin]}/libtool"
+doc AUTHORS CREDITS
+mv \
+ ${PKG}/sbin/* \
+ ${PKG}${SYS_DIR[sbin]}
+(
+  cd ${PKG}${SYS_DIR[bin]}
+  ln -s ntfs-3g ntfsmount
+  cd ${PKG}${SYS_DIR[sbin]}
+  ln -s ${SYS_DIR[bin]}/ntfs-3g mount.ntfs-fuse
+  ln -s ${SYS_DIR[bin]}/ntfs-3g mount.ntfs
+)
+(
+  cd ${PKG}${SYS_DIR[man]}/man8
+  rm -f \
+   mkfs.ntfs.8 \
+   mount.ntfs-3g.8 \
+   mount.lowntfs-3g.8
+  echo ".so man8/mkntfs.8" > mkfs.ntfs.8
+  echo ".so man8/ntfs-3g.8" > mount.ntfs-3g.8
+  echo ".so man8/ntfs-3g.8" > mount.lowntfs-3g.8
+)
+rm -rf \
+ ${PKG}/sbin \
+ ${PKG}${SYS_DIR[doc]}/ntfs-3g
+}
diff --git a/base/fs_ntfs/ntfs-3g_ntfsprogs-2013.1.13-autoreconf.patch.xz b/base/fs_ntfs/ntfs-3g_ntfsprogs-2013.1.13-autoreconf.patch.xz
new file mode 100644
index 0000000..fe81279
--- /dev/null
+++ b/base/fs_ntfs/ntfs-3g_ntfsprogs-2013.1.13-autoreconf.patch.xz
diff --git a/base/fs_reiser3/reiser3.SlackBuild b/base/fs_reiser3/reiser3.SlackBuild
new file mode 100755
index 0000000..40207e3
--- /dev/null
+++ b/base/fs_reiser3/reiser3.SlackBuild
@@ -0,0 +1,99 @@
+#!/bin/sh
+
+CWD=`pwd`
+NAME=reiser3
+VERSION=3.6.21
+ARCH=i586
+BUILD=1
+PKGNAME=reiserfsprogs
+PKGVER=${VERSION}
+BASEDIR=${PKGNAME}-${PKGVER}
+ARCHIVE=${BASEDIR}.tar.bz2
+REPOSITORY=http://www.kernel.org/pub/linux/utils/fs/reiserfs
+FLAGS="-O2 -march=pentium -mtune=pentium -fno-strength-reduce \
+ -fomit-frame-pointer -ffast-math"
+PKG=/tmp/package-$NAME
+
+rm -rf $PKG
+mkdir -p $PKG
+
+# Obtain sources
+if [ ! -e $ARCHIVE ]; then
+  if `wget "$REPOSITORY/$ARCHIVE"`; then
+    true
+  else
+    exit 1
+  fi
+fi
+
+# Compile
+cd /tmp
+tar jxvf $CWD/$ARCHIVE
+cd $BASEDIR
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" ./configure \
+ --prefix=/usr \
+ --sbindir=/sbin \
+ --mandir=/usr/man \
+ --build=${ARCH}-slackware-linux
+make
+
+# Install
+make install DESTDIR=$PKG
+mkdir -p $PKG/install $PKG/usr/doc/$NAME-$VERSION
+cat > $PKG/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+       |-----handy-ruler------------------------------------------------------|
+reiser3: reiser3 (ReiserFS 3 file system utilities)
+reiser3:
+reiser3: Utilities for ReiserFS 3, a file system based on balanced tree
+reiser3: algorithms.
+reiser3:
+reiser3: Homepage: http://www.namesys.com
+reiser3:
+reiser3:
+reiser3:
+reiser3:
+reiser3:
+EOF
+
+install -m644 -g0 -o0 CREDITS ChangeLog README \
+ $PKG/usr/doc/${NAME}-${VERSION}
+
+gzip -9nf \
+ $PKG/usr/doc/${NAME}-${VERSION}/ChangeLog
+
+chmod 444 ${PKG}/usr/man/man?/*.?
+gzip -9nf ${PKG}/usr/man/man?/*.?
+
+#(
+#  # It should be .reiser3 and not .reiserfs
+#  FSNAME=reiserfs
+#  cd ${PKG}/sbin
+#  mv mkreiserfs mkfs.${FSNAME}
+#  mv reiserfsck fsck.${FSNAME}
+#  mv reiserfstune tunefs.${FSNAME}
+#  mv debugreiserfs debugfs.${FSNAME}
+#  mv resize_reiserfs resizefs.${FSNAME}
+#  cd ${PKG}/usr/man/man8
+#  mv mkreiserfs.8 mkfs.${FSNAME}.8
+#  mv reiserfsck.8 fsck.${FSNAME}.8
+#  mv reiserfstune.8 tunefs.${FSNAME}.8
+#  mv debugfsreiserfs.8 debugfs.${FSNAME}.8
+#  mv resize_reiserfs.8 resizefs.${FSNAME}.8
+#)
+
+strip \
+ ${PKG}/sbin/* || :
+
+chown -R root.root ${PKG}
+
+# Make package
+cd $PKG
+cat install/slack-desc | grep "$NAME:" > /tmp/$NAME-$VERSION-$ARCH-$BUILD.txt
+makepkg -l y -c n /tmp/$NAME-$VERSION-$ARCH-$BUILD.tgz
diff --git a/base/fs_ssh/sshfs.build b/base/fs_ssh/sshfs.build
new file mode 100755
index 0000000..c82a11e
--- /dev/null
+++ b/base/fs_ssh/sshfs.build
@@ -0,0 +1,58 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=fs_ssh
+VERSION=2.4
+BUILD=1
+DEPENDS=('fuse >= 2.9.2-1' 'glib >= 2.34.3-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: sshfs (network filesystem)
+${NAME}:
+${NAME}: A filesystem client based on the SSH File Transfer Protocol. Since
+${NAME}: most SSH servers already support this protocol it is very easy to
+${NAME}: set up: i.e. on the server side there's nothing to do. On the client
+${NAME}: side mounting the filesystem is as easy as logging into the server
+${NAME}: with ssh.
+${NAME}:
+${NAME}: Homepage: http://fuse.sourceforge.net/sshfs.html
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=sshfs-fuse
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://dl.sf.net/${SRCNAME[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}"
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS FAQ.txt
+changelog ChangeLog
+}
diff --git a/base/fs_union/fs_union.build b/base/fs_union/fs_union.build
new file mode 100755
index 0000000..d348902
--- /dev/null
+++ b/base/fs_union/fs_union.build
@@ -0,0 +1,64 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=fs_union
+VERSION=0.26
+BUILD=1
+DEPENDS=('fuse >= 2.9.2-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: fs_union (FUSE-based union filesystem)
+${NAME}:
+${NAME}: A unionfs implementation which is more flexible than the current
+${NAME}: in-kernel unionfs solution.
+${NAME}:
+${NAME}: Homepage: http://podgorny.cz/moin/UnionFsFuse
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=unionfs-fuse
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://podgorny.cz/unionfs-fuse/releases/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+SRCCOPY[0]="BSD3"
+
+build0()
+{
+cmake \
+ -DCMAKE_VERBOSE_MAKEFILE:BOOL="on" \
+ -DCMAKE_INSTALL_PREFIX:STRING="${SYS_DIR[usr]}" \
+ -DCMAKE_C_FLAGS_RELEASE:STRING="${FLAGS}" \
+ -DCMAKE_C_FLAGS_DEBUG:STRING="" \
+ -DWITH_XATTR:BOOL="on" \
+ -DMAN_INSTALL_DIR:STRING="${SYS_DIR[man]}" \
+.
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc CREDITS
+changelog NEWS
+(
+  cd ${PKG}${SYS_DIR[man]}/man8
+  echo ".so man8/unionfs-fuse.8" > unionfs.8
+  echo ".so man8/unionfs-fuse.8" > mount.unionfs.8
+)
+install.dir ${PKG}${SYS_DIR[sbin]}
+install.bin mount.unionfs ${PKG}${SYS_DIR[sbin]}
+}
diff --git a/base/fuse/fuse.build b/base/fuse/fuse.build
new file mode 100755
index 0000000..70ffa0a
--- /dev/null
+++ b/base/fuse/fuse.build
@@ -0,0 +1,98 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=fuse
+VERSION=2.9.2
+BUILD=2
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: FUSE (Filesystem in Userspace)
+${NAME}:
+${NAME}: FUSE is a simple interface for userspace programs to export a virtual
+${NAME}: filesystem to the Linux kernel. FUSE also aims to provide a secure
+${NAME}: method for non privileged users to create and mount their own
+${NAME}: filesystem implementations.
+${NAME}:
+${NAME}: Homepage: http://fuse.sourceforge.net
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+# Keep same perms on rc.fuse.new:
+if [ -e etc/rc.d/rc.fuse ]; then
+  cp -a etc/rc.d/rc.fuse etc/rc.d/rc.fuse.new.incoming
+  cat etc/rc.d/rc.fuse.new > etc/rc.d/rc.fuse.new.incoming
+  mv etc/rc.d/rc.fuse.new.incoming etc/rc.d/rc.fuse.new
+fi
+
+config etc/rc.d/rc.fuse.new
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=${url[sf]}/${SRCNAME[0]}/files/fuse-2.X/${SRCVERS[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="GPL2 LGPL2"
+
+build0()
+{
+MOUNT_FUSE_PATH="${SYS_DIR[sbin]}" \
+UDEV_RULES_PATH="${SYS_DIR[udevrules]}" \
+INIT_D_PATH="${SYS_DIR[etc]}/rc.d" \
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-rpath \
+ --disable-static \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-pkgconfigdir="${SYS_DIR[share]}/pkgconfig" \
+ --docdir="${SYS_DIR[doc]}/${SRCNAME[0]}-${SRCVERS[0]}" \
+ --enable-lib \
+ --enable-util
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS FAQ
+changelog ChangeLog
+# Move the start|stop script of fuse to the right place.
+mv \
+ ${PKG}${SYS_DIR[etc]}/rc.d/fuse \
+ ${PKG}${SYS_DIR[etc]}/rc.d/rc.fuse.new
+# udev handles device node creation
+rm -rf ${PKG}/dev
+}
diff --git a/base/gamin/gamin-0.1.10-conf.patch.xz b/base/gamin/gamin-0.1.10-conf.patch.xz
new file mode 100644
index 0000000..c27e0b1
--- /dev/null
+++ b/base/gamin/gamin-0.1.10-conf.patch.xz
diff --git a/base/gamin/gamin-0.1.10-fixconst.patch.xz b/base/gamin/gamin-0.1.10-fixconst.patch.xz
new file mode 100644
index 0000000..2fd5325
--- /dev/null
+++ b/base/gamin/gamin-0.1.10-fixconst.patch.xz
diff --git a/base/gamin/gamin-0.1.10-fixinotifyhelperdoublelock.patch.xz b/base/gamin/gamin-0.1.10-fixinotifyhelperdoublelock.patch.xz
new file mode 100644
index 0000000..254f52b
--- /dev/null
+++ b/base/gamin/gamin-0.1.10-fixinotifyhelperdoublelock.patch.xz
diff --git a/base/gamin/gamin.build b/base/gamin/gamin.build
new file mode 100755
index 0000000..424de20
--- /dev/null
+++ b/base/gamin/gamin.build
@@ -0,0 +1,87 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=gamin
+VERSION=0.1.10
+BUILD=3
+DEPENDS=('glib >= 2.34.3-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: gamin (A minimalist FAM replacement)
+${NAME}:
+${NAME}: Gamin is a file and directory monitoring system defined to be a
+${NAME}: subset of the FAM (File Alteration Monitor) system.
+${NAME}:
+${NAME}: Homepage: http://www.gnome.org/~veillard/gamin
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/gamin/gaminrc.new
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=${URL[gnome]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.bz2
+SRCCOPY[0]="LGPL2"
+
+build0()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.in
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --libexecdir="${SYS_DIR[lib]}/exec" \
+ --with-python=/go/to/hell \
+ --disable-dnotify \
+ --enable-inotifyq
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog NEWS
+install.dir ${PKG}${SYS_DIR[etc]}/gamin
+install.cfg gaminrc ${PKG}${SYS_DIR[etc]}/gamin/gaminrc.new
+rm -rf ${PKG}${SYS_DIR[lib]}64
+}
diff --git a/base/gawk/gawk-4.1.0-notermcap.patch.xz b/base/gawk/gawk-4.1.0-notermcap.patch.xz
new file mode 100644
index 0000000..6c8cf98
--- /dev/null
+++ b/base/gawk/gawk-4.1.0-notermcap.patch.xz
diff --git a/base/gawk/gawk.build b/base/gawk/gawk.build
new file mode 100755
index 0000000..a07b3d7
--- /dev/null
+++ b/base/gawk/gawk.build
@@ -0,0 +1,89 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=gawk
+VERSION=4.1.0
+BUILD=1
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: gawk (pattern scanning and processing language)
+${NAME}:
+${NAME}: Gawk is the GNU Project's implementation of the AWK programming
+${NAME}: language. It conforms to the definition of the language in the POSIX
+${NAME}: 1003.2 Command Language And Utilities Standard. This version in turn
+${NAME}: is based on the description in The AWK Programming Language, by Aho,
+${NAME}: Kernighan, and Weinberger, with the additional features found in the
+${NAME}: System V Release 4 version of UNIX awk. Gawk also provides more
+${NAME}: recent Bell Labs awk extensions, and some GNU-specific extensions.
+${NAME}:
+${NAME}: Homepage: http://www.gnu.org/software/gawk
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+install_info()
+{
+  for file in "\${*}"; do
+    if [ -x usr/bin/install-info ]; then
+      usr/bin/install-info --info-dir=usr/share/info usr/share/info/\${file}.info.xz 2> /dev/null
+    fi
+  done
+}
+
+# Install texinfo files
+
+install_info gawk gawkinet
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://ftp.gnu.org/gnu/${SRCNAME[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+SRCCOPY[0]="GPL3"
+
+build0()
+{
+sed -i 's|$(libdir)/@PACKAGE@|$(libdir)/plugins/@PACKAGE@|g' Makefile.in
+sed -i 's|${libdir}/gawk|${libdir}/plugins/gawk|g' extension/configure
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --disable-rpath \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --infodir="${SYS_DIR[info]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --libexecdir="${SYS_DIR[lib]}/exec"
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog NEWS
+(
+  cd ${PKG}${SYS_DIR[bin]}
+  ln -sf gawk-${SRCVERS[0]} awk
+  ln -sf gawk-${SRCVERS[0]} gawk
+)
+(
+  cd ${PKG}${SYS_DIR[man]}/man1
+  echo ".so man1/gawk.1" > awk.1
+)
+}
diff --git a/base/glib/glib-2.38.2-archdependentheader.patch.xz b/base/glib/glib-2.38.2-archdependentheader.patch.xz
new file mode 100644
index 0000000..89bbfd8
--- /dev/null
+++ b/base/glib/glib-2.38.2-archdependentheader.patch.xz
diff --git a/base/glib/glib-2.38.2-systembussocket.patch.xz b/base/glib/glib-2.38.2-systembussocket.patch.xz
new file mode 100644
index 0000000..89c087c
--- /dev/null
+++ b/base/glib/glib-2.38.2-systembussocket.patch.xz
diff --git a/base/glib/glib.build b/base/glib/glib.build
new file mode 100755
index 0000000..2944b8d
--- /dev/null
+++ b/base/glib/glib.build
@@ -0,0 +1,137 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=glib
+MAJOR=2.38
+VERSION=${MAJOR}.2
+BUILD=1
+DEPENDS=('libraries >= 20130211-1')
+OPTIONS="symprepend"
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: glib (library of C routines)
+${NAME}:
+${NAME}: GLib is a library which includes support routines for C such as
+${NAME}: lists, trees, hashes, memory allocation, and many other things.
+${NAME}:
+${NAME}: Homepage: http://www.gtk.org
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+export GIO_MODULE_DIR="${SYS_DIR[lib]}/plugins/gio-2.0"
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+# Add the gio modules to the cache
+
+if [ -x ${SYS_DIR[bin]}/gio-querymodules ]; then
+  ${SYS_DIR[bin]}/gio-querymodules ${GIO_MODULE_DIR}
+fi
+EOF
+
+configure()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.in
+sed -i 's|${libdir}/glib-2.0/include|${includedir}/glib-2.0/include|g' glib-2.0.pc.in
+sed -i "s|/glib-2.0/include|/$(uname -m)-linux/glib-2.0|g" glib-2.0.pc.in
+export PKG_CONFIG_PATH="${PKG}${SYS_DIR[share]}/pkgconfig"
+export LD_LIBRARY_PATH="${PKG}${SYS_DIR[lib]}"
+export LDFLAGS="-L${PKG}${SYS_DIR[lib]}"
+export CPPFLAGS="-I${SYS_DIR[include]}/libelf -I${PKG}${SYS_DIR[include]}/gio-unix-2.0 -I${PKG}${SYS_DIR[include]}/glib-2.0 -I${PKG}${SYS_DIR[include]}/$(uname -m)-linux/glib-2.0"
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --enable-shared=yes \
+ --enable-static=no \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --libexecdir="${SYS_DIR[lib]}/exec" \
+ --with-html-dir="${SYS_DIR[html]}" \
+ ${*}
+}
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://download.gnome.org/sources/${SRCNAME[0]}/${MAJOR}/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+SRCCOPY[0]="LGPL2"
+
+build0()
+{
+sed -i "s|@ARCHITECTURE@|$(uname -m)|g" glib/Makefile.{am,in} glib-2.0.pc.in
+sed -i 's|codegendir = $(libdir)/gdbus-2.0/codegen|codegendir = $(libdir)/exec/gdbus-2.0/codegen|g' gio/gdbus-2.0/codegen/Makefile.in
+sed -i 's|@libdir@|@libdir@/exec|g' gio/gdbus-2.0/codegen/gdbus-codegen.in
+configure \
+ --with-gio-module-dir="${GIO_MODULE_DIR}"
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog NEWS
+touch ${PKG}${GIO_MODULE_DIR}/giomodule.cache
+rm -rf \
+ ${PKG}${SYS_DIR[html]} \
+ ${PKG}${SYS_DIR[share]}/{gdb,glib-2.0/gdb} \
+ ${PKG}${SYS_DIR[bin]}/gtester-report \
+ ${PKG}${SYS_DIR[man]}/man1/gtester-report.1 \
+ ${PKG}${SYS_DIR[lib]}/*.la
+}
+
+SRCNAME[1]=${NAME}-networking
+SRCVERS[1]=${VERSION}
+SRCPACK[1]=${URL[gnome]}/${SRCNAME[1]}/${MAJOR}/${SRCNAME[1]}-${SRCVERS[1]}.tar.xz
+SRCCOPY[1]="LGPL2"
+
+build1()
+{
+MODULE_DIR="${GIO_MODULE_DIR}" \
+LIBS="-lgmodule-2.0" \
+configure
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+changelog NEWS
+}
+
+#INTROM=1.34
+#SRCNAME[3]=gobject-introspection
+#SRCVERS[3]=${INTROM}.2
+#SRCPACK[3]=${URL[gnome]}/${SRCNAME[3]}/${INTROM}/${SRCNAME[3]}-${SRCVERS[3]}.tar.xz
+#SRCCOPY[3]="LGPL2 GPL2"
+#
+#build3()
+#{
+#sed -i "s|\$(shell pkg-config --variable=|${PKG}/\$(shell pkg-config --variable=|g" Makefile.in
+#sed -i 's|$(GLIB_LIBDIR)/glib-2.0/include/glibconfig.h|$(GLIB_INCLUDEDIR)/glibconfig.h|g' Makefile.in
+#sed -i 's|pkglibdir = $(libdir)/@PACKAGE@|pkglibdir = $(libdir)/exec/@PACKAGE@|g' Makefile.in
+#sed -i 's|@libdir@|@libdir@/exec|g' tools/g-ir-scanner.in
+#configure \
+# --with-glib-src="${BUILD[dir]}/${NAME}-${VERSION}"
+#make ${JOBS} V=1
+#make install DESTDIR="${PKG}"
+#doc AUTHORS CONTRIBUTORS
+#changelog NEWS
+#rm -rf \
+# ${PKG}${SYS_DIR[html]} \
+# ${PKG}${SYS_DIR[lib]}/*.la
+#}
diff --git a/base/gnutls/gnutls.build b/base/gnutls/gnutls.build
new file mode 100755
index 0000000..c572132
--- /dev/null
+++ b/base/gnutls/gnutls.build
@@ -0,0 +1,70 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=gnutls
+MAJOR=3.2
+VERSION=${MAJOR}.12
+BUILD=1
+DEPENDS=('libraries >= 20131221-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: GnuTLS
+${NAME}:
+${NAME}: GnuTLS is a project that aims to develop a library which provides a
+${NAME}: secure layer, over a reliable transport layer. Currently the GnuTLS
+${NAME}: library implements the proposed standards by the IETF's TLS working
+${NAME}: group. The TLS protocol provides communications privacy over the
+${NAME}: Internet. The protocol allows client/server applications to
+${NAME}: communicate in a way that is designed to prevent eavesdropping,
+${NAME}: tampering, or message forgery.
+${NAME}:
+${NAME}: Homepage: http://www.gnu.org/software/gnutls
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}.1
+SRCPACK[0]=ftp://ftp.gnutls.org/gcrypt/gnutls/v${MAJOR}/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+SRCROOT[0]="${SRCNAME[0]}-${VERSION}"
+SRCCOPY[0]="GPL3"
+
+build0()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' lib/Makefile.in libdane/Makefile.in
+INCLUDE="-I${SYS_DIR[include]}/tasn1 -I${SYS_DIR[include]}/idn"
+CFLAGS="${FLAGS} ${INCLUDE}" CXXFLAGS="${FLAGS} ${INCLUDE}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --infodir="${SYS_DIR[info]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-html-dir="${SYS_DIR[html]}"
+# --with-default-trust-store-pkcs11 ?
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+doc AUTHORS THANKS
+changelog NEWS
+# No development docs
+rm -rf ${PKG}${SYS_DIR[info]}
+}
diff --git a/base/gpm/gpm-1.20.7-autostuff.patch.xz b/base/gpm/gpm-1.20.7-autostuff.patch.xz
new file mode 100644
index 0000000..9b75590
--- /dev/null
+++ b/base/gpm/gpm-1.20.7-autostuff.patch.xz
diff --git a/base/gpm/gpm-1.20.7-inputattach.patch.xz b/base/gpm/gpm-1.20.7-inputattach.patch.xz
new file mode 100644
index 0000000..596a718
--- /dev/null
+++ b/base/gpm/gpm-1.20.7-inputattach.patch.xz
diff --git a/base/gpm/gpm-1.20.7-libsilent.patch.xz b/base/gpm/gpm-1.20.7-libsilent.patch.xz
new file mode 100644
index 0000000..0bcf039
--- /dev/null
+++ b/base/gpm/gpm-1.20.7-libsilent.patch.xz
diff --git a/base/gpm/gpm-1.20.7-quiet.patch.xz b/base/gpm/gpm-1.20.7-quiet.patch.xz
new file mode 100644
index 0000000..c9465e2
--- /dev/null
+++ b/base/gpm/gpm-1.20.7-quiet.patch.xz
diff --git a/base/gpm/gpm-1.20.7-rundir.patch.xz b/base/gpm/gpm-1.20.7-rundir.patch.xz
new file mode 100644
index 0000000..a2bfb09
--- /dev/null
+++ b/base/gpm/gpm-1.20.7-rundir.patch.xz
diff --git a/base/gpm/gpm-1.20.7-service.patch.xz b/base/gpm/gpm-1.20.7-service.patch.xz
new file mode 100644
index 0000000..666aa8f
--- /dev/null
+++ b/base/gpm/gpm-1.20.7-service.patch.xz
diff --git a/base/gpm/gpm-1.20.7-slackware.patch.xz b/base/gpm/gpm-1.20.7-slackware.patch.xz
new file mode 100644
index 0000000..3a02510
--- /dev/null
+++ b/base/gpm/gpm-1.20.7-slackware.patch.xz
diff --git a/base/gpm/gpm-1.20.7-weakwgetch.patch.xz b/base/gpm/gpm-1.20.7-weakwgetch.patch.xz
new file mode 100644
index 0000000..47dbb03
--- /dev/null
+++ b/base/gpm/gpm-1.20.7-weakwgetch.patch.xz
diff --git a/base/gpm/gpm.build b/base/gpm/gpm.build
new file mode 100755
index 0000000..ab39ae5
--- /dev/null
+++ b/base/gpm/gpm.build
@@ -0,0 +1,95 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=gpm
+VERSION=1.20.7
+BUILD=5
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: gpm (general purpose mouse server)
+${NAME}:
+${NAME}: The general purpose mouse server, or gpm, allows you to use the mouse
+${NAME}: to cut and paste text from the screen. It also acts as a mouse server
+${NAME}: for applications running on the Linux console, such as the Midnight
+${NAME}: Commander file manager.
+${NAME}:
+${NAME}: NOTE: This program may cause problems when you start X on systems
+${NAME}: that do not use a serial mouse. If you get an 'unable to open mouse
+${NAME}: device' error from X, disable /etc/rc.d/rc.gpm.
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+install_info()
+{
+  for file in "\${*}"; do
+    if [ -x usr/bin/install-info ]; then
+      usr/bin/install-info --info-dir=usr/share/info usr/share/info/\${file}.info.xz 2> /dev/null
+    fi
+  done
+}
+
+# Install texinfo files
+
+install_info gpm
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://www.nico.schottelius.org/software/gpm/archives/${SRCNAME[0]}-${SRCVERS[0]}.tar.lzma
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+chmod +x configure
+CPPFLAGS="-DRUN_QUIET" \
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --infodir="${SYS_DIR[info]}" \
+ --sysconfdir="${SYS_DIR[etc]}/gpm" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}"
+make ${JOBS}
+make install DESTDIR="${PKG}"
+( cd inputattach ; make CFLAGS="${CFLAGS}" DESTDIR="${PKG}" install )
+doc README doc/FAQ doc/README.{etouch,gunze,microtouch,synaptics,twiddler}
+changelog doc/changelog
+install.bin mouseconfig ${PKG}${SYS_DIR[sbin]}
+install.dir ${PKG}${SYS_DIR[etc]}/{gpm,rc.d}
+install.cfg conf/*.conf ${PKG}${SYS_DIR[etc]}/gpm
+install.dir ${PKG}${SYS_DIR[var]}/log/setup
+install.bin setup.mouse ${PKG}${SYS_DIR[var]}/log/setup
+install.dir ${PKG}${SYS_DIR[share]}/emacs/site-lisp
+install.dat contrib/emacs/t-mouse.el ${PKG}${SYS_DIR[share]}/emacs/site-lisp
+install.dir ${PKG}${SYS_DIR[systemdsystemunitdir]}
+install.dat gpm.service ${PKG}${SYS_DIR[systemdsystemunitdir]}
+(
+  cd ${PKG}${SYS_DIR[lib]}
+  chmod 0755 libgpm.so.?.?.?
+  ln -sf libgpm.so.?.?.? libgpm.so
+)
+# Unneeded debugging/test cli apps
+rm -f ${PKG}${SYS_DIR[bin]}/{hltest,get-versions,display-{coords,buttons}}
+}
diff --git a/base/groff/groff-1.22.2-sitetmac.patch.xz b/base/groff/groff-1.22.2-sitetmac.patch.xz
new file mode 100644
index 0000000..6db77e3
--- /dev/null
+++ b/base/groff/groff-1.22.2-sitetmac.patch.xz
diff --git a/base/groff/groff.build b/base/groff/groff.build
new file mode 100755
index 0000000..07079bf
--- /dev/null
+++ b/base/groff/groff.build
@@ -0,0 +1,92 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=groff
+VERSION=1.22.2
+BUILD=1
+DEPENDS=('perl >= 5.12.3-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: GNU groff (document formatting system)
+${NAME}:
+${NAME}: The groff package provides versions of troff, nroff, eqn, tbl and
+${NAME}: other Unix text-formatting utilities. Groff is used to 'compile' man
+${NAME}: pages stored in groff/nroff format into a form which can be printed
+${NAME}: or displayed on the screen. These man pages are stored in compressed
+${NAME}: form in the /usr/share/man/man? directories.
+${NAME}:
+${NAME}: Homepage: http://www.gnu.org/software/groff
+${NAME}:
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+install_info()
+{
+  for file in "\${*}"; do
+    if [ -x usr/bin/install-info ]; then
+      usr/bin/install-info --info-dir=usr/share/info usr/share/info/\${file}.info.xz 2> /dev/null
+    fi
+  done
+}
+
+# Install texinfo files
+
+install_info groff
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=${URL[gnu]}/${SRCNAME[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="GPL3 FDL13"
+
+build0()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-rpath \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --docdir="${SYS_DIR[doc]}/groff" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-appresdir="${SYS_DIR[share]}/X11/app-defaults" \
+ --with-grofferdir="${SYS_DIR[lib]}/exec/groff" \
+ --with-x
+#FIXME: A subpackage for gxditview is needed
+make ${JOBS}
+make install DESTDIR="${PKG}"
+changelog NEWS
+license LICENSES
+install.dat site.tmac ${PKG}${SYS_DIR[share]}/groff/site-tmac/man.local
+install.dat site.tmac ${PKG}${SYS_DIR[share]}/groff/site-tmac/mdoc.local
+# Compatibility symlinks
+(
+  cd ${PKG}${SYS_DIR[bin]}
+  ln -sf eqn geqn
+  ln -sf tbl gtbl
+  ln -sf soelim zsoelim
+)
+rm -rf \
+ ${PKG}${SYS_DIR[lib]}/groff \
+ ${PKG}${SYS_DIR[doc]}/groff
+}
diff --git a/base/gzip/gzip.build b/base/gzip/gzip.build
new file mode 100755
index 0000000..d49c213
--- /dev/null
+++ b/base/gzip/gzip.build
@@ -0,0 +1,89 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=gzip
+VERSION=1.5
+BUILD=2
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: gzip (file compression utility)
+${NAME}:
+${NAME}: Gzip reduces the size of the named files using Lempel-Ziv coding
+${NAME}: (LZ77).  Whenever possible, each file is replaced by one with the
+${NAME}: extension .gz, while keeping the same ownership modes, access and
+${NAME}: modification times.
+${NAME}:
+${NAME}: Homepage: http://www.gnu.org/software/gzip
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+install_info()
+{
+  for file in "\${*}"; do
+    if [ -x usr/bin/install-info ]; then
+      usr/bin/install-info --info-dir=usr/share/info usr/share/info/\${file}.info.xz 2> /dev/null
+    fi
+  done
+}
+
+# Install texinfo files
+
+install_info gzip
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=${URL[gnu]}/${SRCNAME[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+SRCCOPY[0]="GPL3"
+
+build0()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --infodir="${SYS_DIR[info]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}"
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+doc AUTHORS THANKS
+changelog NEWS
+# Already included in the ncompress package
+rm -f ${PKG}${SYS_DIR[bin]}/uncompress
+}
+
+SRCNAME[1]=pigz
+SRCVERS[1]=2.3
+SRCPACK[1]=http://zlib.net/pigz/${SRCNAME[1]}-${SRCVERS[1]}.tar.gz
+
+build1()
+{
+make CFLAGS="${FLAGS}"
+make install install-compat DESTDIR="${PKG}" PREFIX="${SYS_DIR[usr]}"
+doc README
+}
diff --git a/base/gzip/pigz-2.3-makefile.patch.xz b/base/gzip/pigz-2.3-makefile.patch.xz
new file mode 100644
index 0000000..050f2dd
--- /dev/null
+++ b/base/gzip/pigz-2.3-makefile.patch.xz
diff --git a/base/js/js.build b/base/js/js.build
new file mode 100755
index 0000000..acd4c4a
--- /dev/null
+++ b/base/js/js.build
@@ -0,0 +1,74 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=js
+MAJOR=17.0
+VERSION=${MAJOR}.0
+BUILD=1
+DEPENDS=('libnspr >= 4.9.6-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: libjs
+${NAME}:
+${NAME}: The SpiderMonkey JavaScript (ECMAScript 5) interpreter and libraries.
+${NAME}: It includes a just-in-time (JIT) compiler for a significant speed
+${NAME}: increase.
+${NAME}: 
+${NAME}: Homepage: https://developer.mozilla.org/En/SpiderMonkey/17
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=mozjs
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://ftp.mozilla.org/pub/mozilla.org/js/${SRCNAME[0]}${SRCVERS[0]}.tar.gz
+SRCROOT[0]=${SRCNAME[0]}${SRCVERS[0]}
+SRCCOPY[0]="MPL"
+
+#NOTE: glibc (libpthread) needs to be installed in /usr/lib
+#      https://bugzilla.mozilla.org/show_bug.cgi?id=514393
+
+build0()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datadir)/pkgconfig|g' js/src/Makefile.in
+cd js/src
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-system-nspr \
+ --enable-threadsafe \
+ --enable-readline
+make ${JOBS}
+make install DESTDIR="${PKG}"
+find ${PKG}${SYS_DIR[include]} -type f -exec chmod 0644 {} +
+chmod 0644 ${PKG}${SYS_DIR[share]}/pkgconfig/*.pc
+(
+  cd ${PKG}${SYS_DIR[bin]}
+  ln -sf js17 js
+  cd ${PKG}${SYS_DIR[lib]}
+  ln -sf libmozjs-${MAJOR}.so libmozjs.so
+)
+rm -f ${PKG}${SYS_DIR[lib]}/*.a
+}
diff --git a/base/keyboard/kbd-1.15.3-fixestranslation.patch.xz b/base/keyboard/kbd-1.15.3-fixestranslation.patch.xz
new file mode 100644
index 0000000..731028a
--- /dev/null
+++ b/base/keyboard/kbd-1.15.3-fixestranslation.patch.xz
diff --git a/base/keyboard/kbd-1.15.3-keycodesman.patch.xz b/base/keyboard/kbd-1.15.3-keycodesman.patch.xz
new file mode 100644
index 0000000..8a34668
--- /dev/null
+++ b/base/keyboard/kbd-1.15.3-keycodesman.patch.xz
diff --git a/base/keyboard/kbd-1.15.3-maps.patch.xz b/base/keyboard/kbd-1.15.3-maps.patch.xz
new file mode 100644
index 0000000..8a7b7c9
--- /dev/null
+++ b/base/keyboard/kbd-1.15.3-maps.patch.xz
diff --git a/base/keyboard/kbd-1.15.3-nleuro.patch.xz b/base/keyboard/kbd-1.15.3-nleuro.patch.xz
new file mode 100644
index 0000000..a0c0cda
--- /dev/null
+++ b/base/keyboard/kbd-1.15.3-nleuro.patch.xz
diff --git a/base/keyboard/kbd-1.15.3-po.patch.xz b/base/keyboard/kbd-1.15.3-po.patch.xz
new file mode 100644
index 0000000..a21466a
--- /dev/null
+++ b/base/keyboard/kbd-1.15.3-po.patch.xz
diff --git a/base/keyboard/kbd-1.15.3-resizeconx86_64.patch.xz b/base/keyboard/kbd-1.15.3-resizeconx86_64.patch.xz
new file mode 100644
index 0000000..c83042a
--- /dev/null
+++ b/base/keyboard/kbd-1.15.3-resizeconx86_64.patch.xz
diff --git a/base/keyboard/kbd-1.15.3-slackware.patch.xz b/base/keyboard/kbd-1.15.3-slackware.patch.xz
new file mode 100644
index 0000000..26a0d19
--- /dev/null
+++ b/base/keyboard/kbd-1.15.3-slackware.patch.xz
diff --git a/base/keyboard/kbd-1.15.3-unicodestart.patch.xz b/base/keyboard/kbd-1.15.3-unicodestart.patch.xz
new file mode 100644
index 0000000..7c3cd22
--- /dev/null
+++ b/base/keyboard/kbd-1.15.3-unicodestart.patch.xz
diff --git a/base/keyboard/keyboard.build b/base/keyboard/keyboard.build
new file mode 100755
index 0000000..9642dbb
--- /dev/null
+++ b/base/keyboard/keyboard.build
@@ -0,0 +1,85 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=keyboard
+VERSION=1.15.3
+BUILD=1
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: keyboard (keyboard maps and console fonts)
+${NAME}:
+${NAME}: Load and save keyboard mappings. Needed if you are not using the US
+${NAME}: keyboard map. This package also contains utilities to change your
+${NAME}: console fonts - if you install it you'll get a menu later on that
+${NAME}: lets you select from many different fonts. If you like one, you can
+${NAME}: make it your default font. A new default font can be chosen at any
+${NAME}: time by typing 'setconsolefont'.
+${NAME}:
+${NAME}: Homepage: http://www.kbd-project.org
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=kbd
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://ftp.osuosl.org/pub/linux/utils/kbd/${SRCNAME[0]}-${SRCVERS[0]}.tar.bz2
+
+build0()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-rpath \
+ --prefix=/usr \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir=/etc \
+ --libdir=/usr/lib$(libdirsuffix) \
+ --localstatedir=/var \
+ --datadir=/usr/share/kbd
+make ${JOBS} KEYCODES_PROGS=yes RESIZECONS_PROGS=yes
+make install KEYCODES_PROGS=yes RESIZECONS_PROGS=yes DESTDIR="${PKG}"
+( cd src ; make resizecons ; install.bin resizecons ${PKG}/usr/bin )
+doc AUTHORS CREDITS
+changelog ChangeLog
+license COPYING
+install.dir ${PKG}/usr/share/html/kbd
+install.dat doc/*.html ${PKG}/usr/share/html/kbd
+install.dir ${PKG}/install
+install.dat doinst.sh ${PKG}/install
+install.dir ${PKG}/etc/rc.d
+install.dat rc.font.new ${PKG}/etc/rc.d
+install.dir ${PKG}/var/log/setup
+install.bin setup.setconsolefont ${PKG}/var/log/setup
+install.dir ${PKG}/usr/bin
+install.bin setconsolefont ${PKG}/usr/bin
+#FIXME: compat
+(
+  install.dir ${PKG}/bin
+  cd ${PKG}/bin ; ln -sf /usr/bin/loadkeys
+)
+}
+
+SRCNAME[1]=kbd
+SRCVERS[1]=extra-fonts
+SRCPACK[1]=${SRCNAME[1]}-${SRCVERS[1]}.tar.xz
+SRCOPTS[1]="pkgunpack"
+
+build1()
+{
+echo "Nothing to do here!"
+}
diff --git a/base/keyutils/keyutils-1.5.5-makefile.patch.xz b/base/keyutils/keyutils-1.5.5-makefile.patch.xz
new file mode 100644
index 0000000..9fb5e69
--- /dev/null
+++ b/base/keyutils/keyutils-1.5.5-makefile.patch.xz
diff --git a/base/keyutils/keyutils.build b/base/keyutils/keyutils.build
new file mode 100755
index 0000000..2dbb32f
--- /dev/null
+++ b/base/keyutils/keyutils.build
@@ -0,0 +1,55 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=keyutils
+VERSION=1.5.5
+BUILD=2
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: keyutils (Kernel key management utilities)
+${NAME}:
+${NAME}: This package contains tools and a wrapper library to control the
+${NAME}: Linux kernel key management facility and to provide a mechanism by
+${NAME}: which the kernel can call back to user space to get a key
+${NAME}: instantiated.
+${NAME}:
+${NAME}: Homepage: http://people.redhat.com/dhowells/keyutils
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://people.redhat.com/dhowells/keyutils/${SRCNAME[0]}-${SRCVERS[0]}.tar.bz2
+SRCCOPY[0]="GPL2 LGPL21"
+
+build0()
+{
+make ${JOBS} OPTS="${CFLAGS}"
+make install DESTDIR="${PKG}" \
+ BINDIR="${SYS_DIR[bin]}" \
+ SBINDIR="${SYS_DIR[sbin]}" \
+ LIBDIR="${SYS_DIR[lib]}" \
+ USRLIBDIR="${SYS_DIR[lib]}" \
+ MAN1="${SYS_DIR[man]}/man1" \
+ MAN3="${SYS_DIR[man]}/man3" \
+ MAN5="${SYS_DIR[man]}/man5" \
+ MAN8="${SYS_DIR[man]}/man8"
+rm -f ${PKG}${SYS_DIR[lib]}/*.a
+}
diff --git a/base/kmod/kmod-17-searchconf.patch.xz b/base/kmod/kmod-17-searchconf.patch.xz
new file mode 100644
index 0000000..465ffe9
--- /dev/null
+++ b/base/kmod/kmod-17-searchconf.patch.xz
diff --git a/base/kmod/kmod.build b/base/kmod/kmod.build
new file mode 100755
index 0000000..1cbe1b6
--- /dev/null
+++ b/base/kmod/kmod.build
@@ -0,0 +1,102 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=kmod
+VERSION=17
+BUILD=1
+DEPENDS=('xz >= 5.0.4-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: kmod (kernel module utilities)
+${NAME}:
+${NAME}: A set of tools to handle common tasks with Linux kernel modules like
+${NAME}: insert, remove, list, check properties, resolve dependencies and
+${NAME}: aliases.
+${NAME}:
+${NAME}: These tools are desgined on top of libkmod, a library that is shipped
+${NAME}: with kmod.
+${NAME}:
+${NAME}: Homepage: http://git.profusion.mobi/cgit.cgi/kmod.git
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/depmod.d/search.conf.new
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://ftp.kernel.org/pub/linux/utils/kernel/${SRCNAME[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.in
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --includedir="${SYS_DIR[include]}/kmod" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-bashcompletiondir="${SYS_DIR[bashcompletiondir]}" \
+ --with-html-dir="${SYS_DIR[html]}" \
+ --with-rootprefix="" \
+ --with-zlib \
+ --with-xz
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+changelog NEWS
+install.dir ${PKG}${SYS_DIR[etc]}/{depmod,modprobe}.d
+install.dat search.conf.new ${PKG}${SYS_DIR[etc]}/depmod.d
+#FIXME: compatibility symlinks
+(
+  install.dir ${PKG}/{sbin,${SYS_DIR[bin]},${SYS_DIR[sbin]}}
+  cd ${PKG}/sbin
+  ln -sf ${SYS_DIR[bin]}/kmod lsmod
+  cd ${PKG}${SYS_DIR[bin]}
+  ln -sf kmod lsmod
+  for dir in "/sbin" "${SYS_DIR[sbin]}"; do
+  cd ${PKG}${dir}
+    for tool in mod{probe,info} {ins,rm,dep}mod; do
+      ln -sf ${SYS_DIR[bin]}/kmod ${tool}
+    done
+  done
+)
+}
diff --git a/base/libdrm/libdrm.build b/base/libdrm/libdrm.build
new file mode 100755
index 0000000..1c1679d
--- /dev/null
+++ b/base/libdrm/libdrm.build
@@ -0,0 +1,64 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=libdrm
+VERSION=2.4.44
+BUILD=1
+DEPENDS=('udev >= 173-1' 'pci >= 20130507-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: libdrm (A library to support Direct Rendering)
+${NAME}:
+${NAME}: This library implements an interface to the kernel's DRM services. It
+${NAME}: is used to support hardware accelerated 3D rendering.
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://dri.freedesktop.org/${SRCNAME[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.bz2
+
+#NOTE: cairo is just used for tests, it can therefore be safely ignored
+
+build0()
+{
+sed -i 's|${libdir}/pkgconfig|${datarootdir}/pkgconfig|g' configure
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --enable-shared=yes \
+ --enable-static=no \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-kernel-source=/usr/src/linux \
+ --enable-cairo-tests=no \
+ --enable-udev
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+}
diff --git a/base/libnspr/libnspr.build b/base/libnspr/libnspr.build
new file mode 100755
index 0000000..63d7050
--- /dev/null
+++ b/base/libnspr/libnspr.build
@@ -0,0 +1,77 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=libnspr
+VERSION=4.9.6
+BUILD=1
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: libnspr (Netscape portable runtime)
+${NAME}:
+${NAME}: A library that provides platform independence for non-GUI operating
+${NAME}: system facilities. These facilities include threads, thread
+${NAME}: synchronization, normal file and network I/O, interval timing and
+${NAME}: calendar time, basic memory management (malloc and free) and shared
+${NAME}: library linking.
+${NAME}:
+${NAME}: Homepage: http://www.mozilla.org/projects/nspr
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=nspr
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=ftp://ftp.mozilla.org/pub/mozilla.org/nspr/releases/v${SRCVERS[0]}/src/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="MPL2"
+
+build0()
+{
+case "$(uname -m)" in
+  x86_64)
+    ARCH_FLAGS="--enable-64bit"
+  ;;
+esac
+cd mozilla/nsprpub
+sed -i 's|$(libdir)/pkgconfig|$(datadir)/pkgconfig|g' config/Makefile.in
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-debug \
+ --enable-static=no \
+ --enable-shared=yes \
+ --enable-optimize \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --includedir="${SYS_DIR[include]}/nspr" \
+ --localstatedir="${SYS_DIR[var]}" \
+ ${ARCH_FLAGS}
+make ${JOBS}
+make install DESTDIR="${PKG}"
+(
+  cd ${PKG}${SYS_DIR[share]}/pkgconfig
+  ln -sf nspr.pc mozilla-nspr.pc
+)
+chmod 0644 ${PKG}${SYS_DIR[lib]}/*.a
+rm -rf \
+ ${PKG}${SYS_DIR[bin]}/{compile-et.pl,prerr.properties} \
+ ${PKG}${SYS_DIR[share]}/aclocal \
+ ${PKG}${SYS_DIR[include]}/nspr/md
+}
diff --git a/base/libnspr/nspr-4.9.6-pkgconfig.patch.xz b/base/libnspr/nspr-4.9.6-pkgconfig.patch.xz
new file mode 100644
index 0000000..5830ca4
--- /dev/null
+++ b/base/libnspr/nspr-4.9.6-pkgconfig.patch.xz
diff --git a/base/libraries/libaio-0.3.109-optflags.patch.xz b/base/libraries/libaio-0.3.109-optflags.patch.xz
new file mode 100644
index 0000000..75bd731
--- /dev/null
+++ b/base/libraries/libaio-0.3.109-optflags.patch.xz
diff --git a/base/libraries/libffi-3.0.13-includedir.patch.xz b/base/libraries/libffi-3.0.13-includedir.patch.xz
new file mode 100644
index 0000000..04b9cb2
--- /dev/null
+++ b/base/libraries/libffi-3.0.13-includedir.patch.xz
diff --git a/base/libraries/libraries.build b/base/libraries/libraries.build
new file mode 100755
index 0000000..bb0f0f1
--- /dev/null
+++ b/base/libraries/libraries.build
@@ -0,0 +1,394 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=libraries
+VERSION=$(date +%Y%m%d)
+BUILD=1
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: libraries (shared libraries needed by many programs)
+${NAME}:
+${NAME}: This is a collection of shared libraries needed to run most programs.
+${NAME}:
+${NAME}: It includes: zlib, gmp, libidn, libtasn1, libaio, libffi and nettle. 
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+install_info()
+{
+  for file in "\${*}"; do
+    if [ -x usr/bin/install-info ]; then
+      usr/bin/install-info --info-dir=usr/share/info usr/share/info/\${file}.info.xz 2> /dev/null
+    fi
+  done
+}
+
+# Install texinfo files
+
+install_info rluserman
+
+config etc/pkcs11/pkcs11.conf.new
+EOF
+
+# Sources
+
+SRCNAME[0]=zlib
+SRCVERS[0]=1.2.8
+SRCPACK[0]=http://zlib.net/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="GPL3 LGPL3"
+
+build0()
+{
+cmake \
+ -DCMAKE_C_FLAGS:STRING="${FLAGS}" \
+ -DCMAKE_CXX_FLAGS:STRING="${FLAGS}" \
+ -DCMAKE_VERBOSE_MAKEFILE:BOOL="on" \
+ -DCMAKE_INSTALL_PREFIX:PATH="${SYS_DIR[usr]}" \
+ -DINSTALL_LIB_DIR:STRING="${SYS_DIR[lib]}" \
+ -DINSTALL_MAN_DIR:STRING="${SYS_DIR[man]}" \
+ -DINSTALL_PKGCONFIG_DIR:STRING="${SYS_DIR[share]}/pkgconfig" \
+.
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc FAQ
+changelog ChangeLog
+}
+
+SRCNAME[1]=gmp
+SRCVERS[1]=5.1.3
+SRCPACK[1]=ftp://ftp.gmplib.org/pub/gmp-${SRCVERS[1]}/${SRCNAME[1]}-${SRCVERS[1]}.tar.xz
+SRCCOPY[1]="GPL3 LGPL3"
+
+build1()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --infodir="${SYS_DIR[info]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --enable-assembly \
+ --enable-cxx
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog NEWS
+# No development docs
+rm -rf ${PKG}${SYS_DIR[info]}
+}
+
+SRCNAME[2]=mpfr
+SRCVERS[2]=3.1.2
+SRCPACK[2]=http://www.mpfr.org/mpfr-current/${SRCNAME[2]}-${SRCVERS[2]}.tar.xz
+SRCCOPY[2]="GPL3 LGPL3"
+
+build2()
+{
+# Can't use -ffast-math with this library
+CFLAGS="${FLAGS%-ffast-math}" CXXFLAGS="${FLAGS%-ffast-math}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --enable-shared=yes \
+ --enable-static=no \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --infodir="${SYS_DIR[info]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-gmp-include="${PKG}${SYS_DIR[include]}" \
+ --with-gmp-lib="${PKG}${SYS_DIR[lib]}"
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog NEWS
+# No development docs
+rm -rf \
+ ${PKG}${SYS_DIR[doc]}/mpfr \
+ ${PKG}${SYS_DIR[info]}
+}
+
+SRCNAME[3]=libidn
+SRCVERS[3]=1.28
+SRCPACK[3]=http://ftp.gnu.org/gnu/libidn/${SRCNAME[3]}-${SRCVERS[3]}.tar.gz
+SRCCOPY[3]="GPL2 LGPL3"
+
+build3()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.in
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --disable-rpath \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --infodir="${SYS_DIR[info]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --includedir="${SYS_DIR[include]}/idn" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-html-dir="${SYS_DIR[html]}" \
+ --enable-threads=posix
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+doc AUTHORS THANKS
+changelog NEWS
+# No development docs
+rm -rf ${PKG}${SYS_DIR[info]}
+}
+
+SRCNAME[4]=libtasn1
+SRCVERS[4]=3.4
+SRCPACK[4]=http://ftp.gnupg.org/pub/gnutls/${SRCNAME[4]}/${SRCNAME[4]}-${SRCVERS[4]}.tar.gz
+SRCCOPY[4]="LGPL21 GPL3"
+
+build4()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' lib/Makefile.in
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --infodir="${SYS_DIR[info]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --includedir="${SYS_DIR[include]}/tasn1" \
+ --with-html-dir="${SYS_DIR[html]}"
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+doc AUTHORS THANKS
+changelog NEWS
+# No development docs
+rm -rf ${PKG}${SYS_DIR[info]}
+}
+
+SRCNAME[5]=libaio
+SRCVERS[5]=0.3.109
+SRCPACK[5]=http://www.kernel.org/pub/linux/kernel/people/bcrl/aio/${SRCNAME[5]}-${SRCVERS[5]}.tar.bz2
+SRCCOPY[5]="LGPL21"
+
+build5()
+{
+make ${JOBS} OPTFLAGS="${FLAGS}"
+make install prefix="${PKG}${SYS_DIR[usr]}" libdir="${PKG}${SYS_DIR[lib]}"
+changelog ChangeLog
+rm -f ${PKG}${SYS_DIR[lib]}/libaio.a
+}
+
+SRCNAME[6]=nettle
+SRCVERS[6]=2.7.1
+SRCPACK[6]=http://www.lysator.liu.se/~nisse/archive/${SRCNAME[6]}-${SRCVERS[6]}.tar.gz
+SRCCOPY[6]="LGPL21"
+
+build6()
+{
+#NOTE: cannot use --disable-static as it breaks the build
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.in
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --enable-shared \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --infodir="${SYS_DIR[info]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}"
+make ${JOBS}
+make install DESTDIR="${PKG}"
+changelog NEWS
+chmod 0755 ${PKG}${SYS_DIR[lib]}/*.so*
+# No development docs
+rm -rf \
+ ${PKG}${SYS_DIR[info]} \
+ ${PKG}${SYS_DIR[lib]}/lib{nettle,hogweed}.a
+}
+
+SRCNAME[7]=libffi
+SRCVERS[7]=3.0.13
+SRCPACK[7]=ftp://sourceware.org/pub/${SRCNAME[7]}/${SRCNAME[7]}-${SRCVERS[7]}.tar.gz
+SRCCOPY[7]="MIT"
+
+build7()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.in
+sed -i "s|@ARCHITECTURE@|$(uname -m)|g" include/Makefile.{am,in} libffi.pc.in
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --infodir="${SYS_DIR[info]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}"
+make ${JOBS}
+make install DESTDIR="${PKG}"
+changelog ChangeLog
+#FIXME: kludge
+mv \
+ ${PKG}${SYS_DIR[lib]}64/* \
+ ${PKG}${SYS_DIR[lib]}
+rmdir ${PKG}${SYS_DIR[lib]}64
+# No development docs
+rm -rf ${PKG}${SYS_DIR[info]}
+}
+
+SRCNAME[8]=popt
+SRCVERS[8]=1.16
+SRCPACK[8]=http://rpm5.org/files/popt/${SRCNAME[8]}-${SRCVERS[8]}.tar.gz
+SRCCOPY[8]="MIT"
+
+build8()
+{
+sed -i 's|$(prefix)/lib/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.in
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-rpath \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}"
+make ${JOBS}
+make install DESTDIR="${PKG}"
+changelog CHANGES
+}
+
+SRCNAME[9]=p11-kit
+SRCVERS[9]=0.20.1
+SRCPACK[9]=http://p11-glue.freedesktop.org/releases/${SRCNAME[9]}-${SRCVERS[9]}.tar.gz
+SRCCOPY[9]="BSD3"
+
+build9()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' p11-kit/Makefile.in
+sed -i 's|${libdir}/p11-kit|${libdir}/exec/p11-kit|g' configure
+LIBTASN1_CFLAGS="-I${PKG}${SYS_DIR[include]}/tasn1" \
+LIBTASN1_LIBS="-L${PKG}${SYS_DIR[lib]} -ltasn1" \
+LIBFFI_CFLAGS="-I${PKG}${SYS_DIR[include]}/$(uname -m)-linux/libffi-${SRCVERS[7]}" \
+LIBFFI_LIBS="-L${PKG}${SYS_DIR[lib]} -lffi" \
+CPPFLAGS="-I${PKG}${SYS_DIR[include]}/tasn1" \
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --disable-rpath \
+ --enable-static=no \
+ --enable-shared=yes \
+ --enable-debug=no \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-html-dir="${SYS_DIR[html]}" \
+ --with-module-path="${SYS_DIR[lib]}/plugins/pkcs11"
+#--with-trust-paths="${SYS_DIR[share]}/ca-certificates"
+#--with-system-config=
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog NEWS
+mv \
+ ${PKG}${SYS_DIR[etc]}/pkcs11/pkcs11.conf.example \
+ ${PKG}${SYS_DIR[etc]}/pkcs11/pkcs11.conf.new
+rm -rf ${PKG}${SYS_DIR[html]}
+}
+
+#NOTE: ncurses is a dependency of readline
+
+SRCNAME[10]=readline
+SRCVERS[10]=6.2
+SRCPACK[10]=${URL[gnu]}/readline/${SRCNAME[10]}-${SRCVERS[10]}.tar.gz
+SRCCOPY[10]="GPL2"
+
+build10()
+{
+case "$(uname -m)" in
+  x86_64)
+    PIC="-fPIC"
+  ;;
+esac
+sed -i 's|$(prefix)/lib/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.in
+sed -i 's|-Wl,-rpath,$(libdir) ||g' support/shobj-conf
+CFLAGS="${FLAGS} ${PIC}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --enable-static=yes \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --infodir="${SYS_DIR[info]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --enable-multibyte \
+ --with-curses
+make ${JOBS} SHLIB_LIBS="-lncurses"
+make install DESTDIR="${PKG}"
+changelog CHANGES
+rm -rf \
+ ${PKG}${SYS_DIR[share]}/readline \
+ ${PKG}${SYS_DIR[info]}/{history,readline}*
+#chmod 0755 ${PKG}${SYS_DIR[lib]}/libreadline*.so.*
+}
diff --git a/base/libraries/nettle-2.7.1-nodebugffs.patch.xz b/base/libraries/nettle-2.7.1-nodebugffs.patch.xz
new file mode 100644
index 0000000..239d5fe
--- /dev/null
+++ b/base/libraries/nettle-2.7.1-nodebugffs.patch.xz
diff --git a/base/libraries/readline-6.2-update004.patch.xz b/base/libraries/readline-6.2-update004.patch.xz
new file mode 100644
index 0000000..4096354
--- /dev/null
+++ b/base/libraries/readline-6.2-update004.patch.xz
diff --git a/base/lilo/lilo-23.2-bootsplash.patch.xz b/base/lilo/lilo-23.2-bootsplash.patch.xz
new file mode 100644
index 0000000..ea036b3
--- /dev/null
+++ b/base/lilo/lilo-23.2-bootsplash.patch.xz
diff --git a/base/lilo/lilo-23.2-slackware.patch.xz b/base/lilo/lilo-23.2-slackware.patch.xz
new file mode 100644
index 0000000..c51f043
--- /dev/null
+++ b/base/lilo/lilo-23.2-slackware.patch.xz
diff --git a/base/lilo/lilo.build b/base/lilo/lilo.build
new file mode 100755
index 0000000..9c3cfc8
--- /dev/null
+++ b/base/lilo/lilo.build
@@ -0,0 +1,74 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=lilo
+VERSION=23.2
+BUILD=1
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: lilo (Linux Loader)
+${NAME}:
+${NAME}: Generic Boot Loader for Linux ('LInux LOader') by Werner Almesberger.
+${NAME}: LILO boots Linux from your hard drive. It can also boot other
+${NAME}: operating systems such as MS-DOS and OS/2, and can even boot DOS from
+${NAME}: the second hard drive. LILO comes with utilities and documentation
+${NAME}: that make it easier to install, such as 'liloconfig' and
+${NAME}: 'QuickStart'. NOTE: Installing boot loaders is inherently dangerous
+${NAME}: Be sure to have some means to boot your system from a different media
+${NAME}: if you install LILO on your hard disk.
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=https://alioth.debian.org/frs/download.php/3539/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="BSD3"
+
+build0()
+{
+make ${JOBS}
+make -i install DESTDIR="${PKG}" MAN_DIR="/usr/man" SBIN_DIR="/usr/sbin"
+doc README sample/*.conf readme/*
+changelog NEWS
+rm -rf \
+ ${PKG}/boot/{coffee.bmp,*debian*} \
+ ${PKG}/usr/bin/liloconfig \
+ ${PKG}/etc/{initramfs,kernel}
+mv \
+ ${PKG}/etc/lilo.conf_example \
+ ${PKG}/etc/lilo.conf.example
+install.bin liloconfig ${PKG}/usr/sbin
+install.dir ${PKG}/var/log/setup
+install.bin setup.liloconfig ${PKG}/var/log/setup
+install.dat text.lilohelp ${PKG}/var/log/setup
+case "$(uname -m)" in
+  x86_64)
+    install.dat slack64.bmp ${PKG}/boot/slack.bmp
+  ;;
+  *)
+    install.dat slack.bmp ${PKG}/boot
+  ;;
+esac
+#FIXME: compat
+install.dir ${PKG}/sbin
+(
+  cd ${PKG}/sbin
+  ln -sf /usr/sbin/lilo
+  ln -sf /usr/sbin/liloconfig
+)
+}
diff --git a/base/logrotate/logrotate-3.8.3-config.patch.xz b/base/logrotate/logrotate-3.8.3-config.patch.xz
new file mode 100644
index 0000000..f28bc6b
--- /dev/null
+++ b/base/logrotate/logrotate-3.8.3-config.patch.xz
diff --git a/base/logrotate/logrotate-3.8.3-paths.patch.xz b/base/logrotate/logrotate-3.8.3-paths.patch.xz
new file mode 100644
index 0000000..3c48916
--- /dev/null
+++ b/base/logrotate/logrotate-3.8.3-paths.patch.xz
diff --git a/base/logrotate/logrotate-3.8.3-tabooexts.patch.xz b/base/logrotate/logrotate-3.8.3-tabooexts.patch.xz
new file mode 100644
index 0000000..6b05cfe
--- /dev/null
+++ b/base/logrotate/logrotate-3.8.3-tabooexts.patch.xz
diff --git a/base/logrotate/logrotate.build b/base/logrotate/logrotate.build
new file mode 100755
index 0000000..b2c9440
--- /dev/null
+++ b/base/logrotate/logrotate.build
@@ -0,0 +1,70 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=logrotate
+VERSION=3.8.3
+BUILD=3
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: logrotate (system log rotation tool)
+${NAME}:
+${NAME}: The logrotate utility is designed to simplify the administration
+${NAME}: of log files on a system which generates a lot of log files.
+${NAME}: Logrotate allows for the automatic rotation compression, removal
+${NAME}: and mailing of log files. Logrotate can be set to handle a log
+${NAME}: file daily, weekly, monthly or when the log file gets to a certain
+${NAME}: size. Normally, logrotate runs as a daily cron job.
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/logrotate.conf.new
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://fedorahosted.org/releases/l/o/logrotate/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+make ${JOBS} RPM_OPT_FLAGS="${FLAGS}"
+make install PREFIX="${PKG}" MANDIR="${SYS_DIR[man]}"
+changelog CHANGES
+install.dir ${PKG}${SYS_DIR[etc]}/{logrotate.d,cron.daily}
+install.dir ${PKG}${SYS_DIR[var]}/lib/logrotate
+install.cfg logrotate.conf ${PKG}${SYS_DIR[etc]}/logrotate.conf.new
+install.bin logrotate.cron ${PKG}${SYS_DIR[etc]}/cron.daily/logrotate
+}
diff --git a/base/lvm/LVM2-2.02.98-slackware.patch.xz b/base/lvm/LVM2-2.02.98-slackware.patch.xz
new file mode 100644
index 0000000..1cee556
--- /dev/null
+++ b/base/lvm/LVM2-2.02.98-slackware.patch.xz
diff --git a/base/lvm/lvm.build b/base/lvm/lvm.build
new file mode 100755
index 0000000..ddd821a
--- /dev/null
+++ b/base/lvm/lvm.build
@@ -0,0 +1,146 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=lvm
+VERSION=2.02.98
+BUILD=1
+DEPENDS=('udev >= 173-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: lvm (Logical Volume Manager version 2)
+${NAME}:
+${NAME}: Heinz Mauelshagen's LVM (Logical Volume Manager) for Linux. LVM adds
+${NAME}: an additional layer between the physical peripherals and the
+${NAME}: low-level I/O interface to get a logical view of disks. This allows
+${NAME}: the concatenation of several disks (so-called physical volumes or PVs)
+${NAME}: to form a storage pool (so-called Volume Group or VG) with allocation
+${NAME}: units called physical extents (called PE). With LVM, you can extend,
+${NAME}: resize, or relocate storage dynamically.
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=LVM2
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=ftp://sources.redhat.com/pub/lvm2/${SRCNAME[0]}.${SRCVERS[0]}.tgz
+SRCROOT[0]=${SRCNAME[0]}.${SRCVERS[0]}
+SRCCOPY[0]="GPL2 LGPL21"
+
+build0()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --prefix=/usr \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir=/etc \
+ --libdir=/usr/lib$(libdirsuffix) \
+ --localstatedir=/var \
+ --sbindir=/usr/sbin \
+ --disable-readline \
+ --disable-selinux \
+ --enable-cmdlib \
+ --enable-applib \
+ --enable-dmeventd \
+ --enable-static_link \
+ --enable-pkgconfig \
+ --enable-udev_sync \
+ --enable-udev_rules \
+ --with-udev-prefix="/usr" \
+ --with-udevdir="$(pkg-config udev --variable=udevdir)/rules.d" \
+ --with-systemdsystemunitdir="${SYS_DIR[systemdsystemunitdir]}" \
+ --with-tmpfilesdir="/etc/tmpfiles.d" \
+ --with-default-run-dir=/run \
+ --with-default-locking-dir=/run/lock \
+ --with-dmeventd-pidfile=/run/dmeventd.pid \
+ --with-device-uid=0 \
+ --with-device-gid=6 \
+ --with-device-mode=0644 \
+ --with-staticdir=/usr/sbin \
+ --with-usrsbindir=/usr/sbin \
+ --with-usrlibdir=/usr/lib$(libdirsuffix)
+make ${JOBS}
+make install install_systemd_units DESTDIR="${PKG}"
+doc WHATS_NEW_DM
+changelog WHATS_NEW
+install.dat doinst.sh ${PKG}/install
+#FIXME: systemd (make install_systemd_generators)
+#install.dir ${PKG}${SYS_DIR[run]}/lvm
+mv \
+ ${PKG}/etc/lvm/lvm.conf \
+ ${PKG}/etc/lvm/lvm.conf.new
+rm -rf \
+ ${PKG}/usr/lib$(libdirsuffix)/*.a
+#FIXME: compatibility symlinks
+install.dir ${PKG}/sbin
+(
+  cd ${PKG}/sbin
+  ln -sf /usr/sbin/dmeventd
+  ln -sf /usr/sbin/dmeventd.static
+  ln -sf /usr/sbin/lvmdump
+  ln -sf /usr/sbin/lvm
+  ln -sf /usr/sbin/lvm.static
+  ln -sf /usr/sbin/lvmconf
+  ln -sf /usr/sbin/dmsetup
+  ln -sf /usr/sbin/dmsetup.static
+  ln -sf /usr/sbin/vgimportclone
+  ln -sf /usr/sbin/fsadm
+  ln -sf /usr/sbin/lvm lvchange
+  ln -sf /usr/sbin/lvm lvconvert
+  ln -sf /usr/sbin/lvm lvcreate
+  ln -sf /usr/sbin/lvm lvdisplay
+  ln -sf /usr/sbin/lvm lvextend
+  ln -sf /usr/sbin/lvm lvmchange
+  ln -sf /usr/sbin/lvm lvmdiskscan
+  ln -sf /usr/sbin/lvm lvmsadc
+  ln -sf /usr/sbin/lvm lvmsar
+  ln -sf /usr/sbin/lvm lvreduce
+  ln -sf /usr/sbin/lvm lvremove
+  ln -sf /usr/sbin/lvm lvrename
+  ln -sf /usr/sbin/lvm lvresize
+  ln -sf /usr/sbin/lvm lvs
+  ln -sf /usr/sbin/lvm lvscan
+  ln -sf /usr/sbin/lvm pvchange
+  ln -sf /usr/sbin/lvm pvck
+  ln -sf /usr/sbin/lvm pvcreate
+  ln -sf /usr/sbin/lvm pvdisplay
+  ln -sf /usr/sbin/lvm pvmove
+  ln -sf /usr/sbin/lvm pvremove
+  ln -sf /usr/sbin/lvm pvresize
+  ln -sf /usr/sbin/lvm pvs
+  ln -sf /usr/sbin/lvm pvscan
+  ln -sf /usr/sbin/lvm vgcfgbackup
+  ln -sf /usr/sbin/lvm vgcfgrestore
+  ln -sf /usr/sbin/lvm vgchange
+  ln -sf /usr/sbin/lvm vgck
+  ln -sf /usr/sbin/lvm vgconvert
+  ln -sf /usr/sbin/lvm vgcreate
+  ln -sf /usr/sbin/lvm vgdisplay
+  ln -sf /usr/sbin/lvm vgexport
+  ln -sf /usr/sbin/lvm vgextend
+  ln -sf /usr/sbin/lvm vgimport
+  ln -sf /usr/sbin/lvm vgmerge
+  ln -sf /usr/sbin/lvm vgmknodes
+  ln -sf /usr/sbin/lvm vgreduce
+  ln -sf /usr/sbin/lvm vgremove
+  ln -sf /usr/sbin/lvm vgrename
+  ln -sf /usr/sbin/lvm vgs
+  ln -sf /usr/sbin/lvm vgscan
+  ln -sf /usr/sbin/lvm vgsplit
+)
+}
diff --git a/base/man/man-1.6g-makewhatisxz.patch.xz b/base/man/man-1.6g-makewhatisxz.patch.xz
new file mode 100644
index 0000000..a1108a5
--- /dev/null
+++ b/base/man/man-1.6g-makewhatisxz.patch.xz
diff --git a/base/man/man-1.6g-mandoc.patch.xz b/base/man/man-1.6g-mandoc.patch.xz
new file mode 100644
index 0000000..d0b3ea7
--- /dev/null
+++ b/base/man/man-1.6g-mandoc.patch.xz
diff --git a/base/man/man-1.6g-nousrsplit.patch.xz b/base/man/man-1.6g-nousrsplit.patch.xz
new file mode 100644
index 0000000..a81cdf9
--- /dev/null
+++ b/base/man/man-1.6g-nousrsplit.patch.xz
diff --git a/base/man/man-1.6g-paths.patch.xz b/base/man/man-1.6g-paths.patch.xz
new file mode 100644
index 0000000..169f567
--- /dev/null
+++ b/base/man/man-1.6g-paths.patch.xz
diff --git a/base/man/man-1.6g-slackware.patch.xz b/base/man/man-1.6g-slackware.patch.xz
new file mode 100644
index 0000000..1b3d9e9
--- /dev/null
+++ b/base/man/man-1.6g-slackware.patch.xz
diff --git a/base/man/man.build b/base/man/man.build
new file mode 100755
index 0000000..2bcb044
--- /dev/null
+++ b/base/man/man.build
@@ -0,0 +1,56 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=man
+VERSION=1.6g
+BUILD=3
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: man (format and display the on-line manual pages)
+${NAME}:
+${NAME}: The man package is a collection of tools used for searching and
+${NAME}: reading the online system documentation. In fact, on most UNIX-like
+${NAME}: operating systems it is the primary means of finding out how
+${NAME}: programs on the system work. For example, 'man man' will display the
+${NAME}: documentation for man itself.
+${NAME}:
+${NAME}: Man requires the groff text processing package.
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://primates.ximian.com/~flucifredi/${NAME}/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+./configure \
+ +lang all \
+ +fhs \
+ -confdir /etc/conf.d
+make ${JOBS} CFLAGS="${FLAGS}"
+make install DESTDIR="${PKG}"
+changelog HISTORY
+install.dat doinst.sh ${PKG}/install
+install -d -m 0700 ${PKG}/var/cache/man/cat{1,2,3,4,5,6,7,8,9,n}
+mv \
+ ${PKG}/etc/conf.d/man.conf \
+ ${PKG}/etc/conf.d/man.conf.new
+}
diff --git a/base/man_pages/man-pages-3.46-whatis.patch.xz b/base/man_pages/man-pages-3.46-whatis.patch.xz
new file mode 100644
index 0000000..4942393
--- /dev/null
+++ b/base/man_pages/man-pages-3.46-whatis.patch.xz
diff --git a/base/man_pages/man-pages-3.46-xz.patch.xz b/base/man_pages/man-pages-3.46-xz.patch.xz
new file mode 100644
index 0000000..72faa41
--- /dev/null
+++ b/base/man_pages/man-pages-3.46-xz.patch.xz
diff --git a/base/man_pages/man_pages.build b/base/man_pages/man_pages.build
new file mode 100755
index 0000000..c5fa7e8
--- /dev/null
+++ b/base/man_pages/man_pages.build
@@ -0,0 +1,51 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=man_pages
+VERSION=3.46
+BUILD=1
+ARCH=noarch
+OPTIONS="nomanz normla nostrip"
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: man_pages (system documentation)
+${NAME}:
+${NAME}: Man pages are online documentation for Linux. This package includes
+${NAME}: many section 1, 2, 3, 4, 5, 7, and 8 man pages for Linux.
+${NAME}:
+${NAME}: The man-pages distribution is maintained by Michael Kerrisk with
+${NAME}: the help of more writers, editors, and other contributors than we
+${NAME}: can name here.
+${NAME}:
+${NAME}: For more information, see http://www.kernel.org/doc/man-pages
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=man-pages
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://www.kernel.org/pub/linux/docs/${SRCNAME[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+
+build0()
+{
+make screen xz MANDIR="${SYS_DIR[man]}"
+make install MANDIR="${SYS_DIR[man]}" DESTDIR="${PKG}"
+doc Changes.old
+changelog Changes
+install.dat doinst.sh ${PKG}/install
+install.doc whatis.sample ${PKG}${SYS_DIR[man]}
+}
diff --git a/base/memstat/memstat-0.5-config.patch.bz2 b/base/memstat/memstat-0.5-config.patch.bz2
new file mode 100644
index 0000000..9a8dcad
--- /dev/null
+++ b/base/memstat/memstat-0.5-config.patch.bz2
diff --git a/base/memstat/memstat-0.5-makefile.patch.bz2 b/base/memstat/memstat-0.5-makefile.patch.bz2
new file mode 100644
index 0000000..04b1f17
--- /dev/null
+++ b/base/memstat/memstat-0.5-makefile.patch.bz2
diff --git a/base/memstat/memstat-0.5-slackware.patch.bz2 b/base/memstat/memstat-0.5-slackware.patch.bz2
new file mode 100644
index 0000000..4c9e8da
--- /dev/null
+++ b/base/memstat/memstat-0.5-slackware.patch.bz2
diff --git a/base/memstat/memstat.SlackBuild b/base/memstat/memstat.SlackBuild
new file mode 100755
index 0000000..a195445
--- /dev/null
+++ b/base/memstat/memstat.SlackBuild
@@ -0,0 +1,81 @@
+#!/bin/sh
+
+CWD=`pwd`
+NAME=memstat
+VERSION=0.5
+ARCH=i586
+BUILD=1
+PKGNAME=$NAME
+PKGVER=$VERSION
+BASEDIR=${PKGNAME}-${PKGVER}
+ARCHIVE=${PKGNAME}_${PKGVER}.tar.gz
+REPOSITORY=http://ftp.de.debian.org/debian/pool/main/m/memstat
+FLAGS="-O2 -march=pentium -mtune=pentium -fno-strength-reduce \
+ -fomit-frame-pointer -ffast-math"
+PKG=/tmp/package-$NAME
+
+rm -rf $PKG
+mkdir -p $PKG
+
+# Obtain sources
+if [ ! -e $ARCHIVE ]; then
+  if `wget "$REPOSITORY/$ARCHIVE"`; then
+    true
+  else
+    exit 1
+  fi
+fi
+
+# Compile
+cd /tmp
+tar zxvf $CWD/$ARCHIVE
+cd $BASEDIR
+bzcat $CWD/$NAME-$VERSION-makefile.patch.bz2 | patch -p1 -s
+bzcat $CWD/$NAME-$VERSION-config.patch.bz2 | patch -p1 -s
+bzcat $CWD/$NAME-$VERSION-slackware.patch.bz2 | patch -p1 -s
+make OPTS="${FLAGS}" sysconfdir="/etc/conf.d"
+
+# Install
+make install DESTDIR=$PKG sysconfdir="/etc/conf.d" mandir="/usr/man"
+mkdir -p $PKG/install $PKG/usr/doc/$NAME-$VERSION
+cat > $PKG/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+       |-----handy-ruler------------------------------------------------------|
+memstat: memstat (Identify what's using up virtual memory)
+memstat:
+memstat: Lists all the processes, executables, and shared libraries that are
+memstat: using up virtual memory. It's helpful to see how the shared memory
+memstat: is used and which 'old' libs are loaded.
+memstat:
+memstat:
+memstat:
+memstat:
+memstat:
+memstat:
+EOF
+
+install -m644 -g0 -o0 memstat-tutorial.txt \
+ $PKG/usr/doc/$NAME-$VERSION
+
+mv $PKG/etc/conf.d/memstat.conf \
+ $PKG/etc/conf.d/memstat.conf.new
+
+install -m 0755 -g 0 -o 0 doinst.sh $PKG/install
+
+chmod 444 $PKG/usr/man/man?/*.?
+gzip -9nf $PKG/usr/man/man?/*.?
+
+strip $PKG/usr/bin/* || :
+
+chown -R root.root $PKG
+
+# Make package
+cd $PKG
+cat install/slack-desc | grep "$NAME:" > /tmp/$NAME-$VERSION-$ARCH-$BUILD.txt
+makepkg -l y -c n /tmp/$NAME-$VERSION-$ARCH-$BUILD.tgz
diff --git a/base/moreutils/moreutils.SlackBuild b/base/moreutils/moreutils.SlackBuild
new file mode 100755
index 0000000..2fb5144
--- /dev/null
+++ b/base/moreutils/moreutils.SlackBuild
@@ -0,0 +1,79 @@
+#!/bin/sh
+
+CWD=`pwd`
+NAME=moreutils
+VERSION=0.40
+ARCH=i586
+BUILD=1
+PKGNAME=$NAME
+PKGVER=$VERSION
+BASEDIR=$PKGNAME
+ARCHIVE=$PKGNAME_$PKGVER.tar.gz
+REPOSITORY=http://ftp.de.debian.org/debian/pool/main/m/moreutils
+FLAGS="-O2 -march=pentium -mtune=pentium -fno-strength-reduce \
+ -fomit-frame-pointer -ffast-math"
+PKG=/tmp/package-$NAME
+
+rm -rf $PKG
+mkdir -p $PKG
+
+# Obtain sources
+if [ ! -e $ARCHIVE ]; then
+  if `wget "$REPOSITORY/$ARCHIVE"`; then
+    true
+  else
+    exit 1
+  fi
+fi
+
+# Compile
+cd /tmp
+tar zxvf $CWD/$ARCHIVE
+cd $BASEDIR
+make CFLAGS=${FLAGS}
+
+# Install
+make install DESTDIR=$PKG
+mkdir -p $PKG/install
+cat > $PKG/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+         |-----handy-ruler------------------------------------------------------|
+moreutils: moreutils (additional shell utilities)
+moreutils:
+moreutils: A growing collection of shell tools including:
+moreutils:
+moreutils:   ifdata, ifne, isutf8, lckdo, mispipe, parallel, pee and sponge.
+moreutils:
+moreutils:
+moreutils: Homepage: http://joey.kitenet.net/code/moreutils
+moreutils:
+moreutils:
+moreutils:
+EOF
+
+# Get rid of all perl shit
+(
+  cd $PKG/usr/bin
+  rm -f combine ts vidir vipe zrun
+  cd $PKG/usr/man/man1
+  rm -f combine.1 ts.1 vidir.1 vipe.1 zrun.1
+)
+
+chmod 0444 $PKG/usr/man/man?/*.?
+xz -9f $PKG/usr/man/man?/*.?
+
+strip \
+ $PKG/usr/bin/* || :
+
+chown -R root.root $PKG
+
+# Make package
+cd $PKG
+cat install/slack-desc | grep "$NAME:" > /tmp/$NAME-$VERSION-$ARCH-$BUILD.txt
+makepkg -l y -c n /tmp/$NAME-$VERSION-$ARCH-$BUILD.txz
diff --git a/base/nano/nano-2.2.6-localedir.patch.xz b/base/nano/nano-2.2.6-localedir.patch.xz
new file mode 100644
index 0000000..fe1cf55
--- /dev/null
+++ b/base/nano/nano-2.2.6-localedir.patch.xz
diff --git a/base/nano/nano.build b/base/nano/nano.build
new file mode 100755
index 0000000..0f17409
--- /dev/null
+++ b/base/nano/nano.build
@@ -0,0 +1,99 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=nano
+MAJOR=2.2
+VERSION=${MAJOR}.6
+BUILD=2
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: GNU nano (text editor)
+${NAME}:
+${NAME}: GNU nano is a drop-in replacement for pico (the Pine MUA's editor).
+${NAME}: The difference is that nano has more features such as syntax
+${NAME}: highlighting and it is distributed under the terms of the GNU General
+${NAME}: Public License.
+${NAME}:
+${NAME}: Homepage: http://www.nano-editor.org
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+install_info()
+{
+  for file in "\${*}"; do
+    if [ -x usr/bin/install-info ]; then
+      usr/bin/install-info --info-dir=usr/share/info usr/share/info/\${file}.info.xz 2> /dev/null
+    fi
+  done
+}
+
+install_info nano
+
+config etc/nanorc.new
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://www.nano-editor.org/dist/v${MAJOR}/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="GPL3 FDL12"
+
+build0()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-rpath \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --infodir="${SYS_DIR[info]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --datadir="${SYS_DIR[share]}/application-data" \
+ --localedir="${SYS_DIR[share]}/locale" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --disable-wrapping-as-root \
+ --enable-utf8
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS THANKS UPGRADE
+changelog NEWS
+install.dir ${PKG}${SYS_DIR[etc]}
+install.doc doc/nanorc.sample ${PKG}${SYS_DIR[etc]}/nanorc.new
+install.dir ${PKG}${SYS_DIR[html]}/${NAME}
+install.doc doc/faq.html ${PKG}${SYS_DIR[html]}/${NAME}
+rm -rf ${PKG}${SYS_DIR[share]}/application-data/nano/man-html
+}
diff --git a/base/networkmanager/NetworkManager-0.9.8.2-config.patch.xz b/base/networkmanager/NetworkManager-0.9.8.2-config.patch.xz
new file mode 100644
index 0000000..c254d61
--- /dev/null
+++ b/base/networkmanager/NetworkManager-0.9.8.2-config.patch.xz
diff --git a/base/networkmanager/NetworkManager-0.9.8.2-netdevgrp.patch.xz b/base/networkmanager/NetworkManager-0.9.8.2-netdevgrp.patch.xz
new file mode 100644
index 0000000..9ef0b7a
--- /dev/null
+++ b/base/networkmanager/NetworkManager-0.9.8.2-netdevgrp.patch.xz
diff --git a/base/networkmanager/NetworkManager-0.9.8.2-rundir.patch.xz b/base/networkmanager/NetworkManager-0.9.8.2-rundir.patch.xz
new file mode 100644
index 0000000..14a4686
--- /dev/null
+++ b/base/networkmanager/NetworkManager-0.9.8.2-rundir.patch.xz
diff --git a/base/networkmanager/NetworkManager-0.9.8.2-sysvinit.patch.xz b/base/networkmanager/NetworkManager-0.9.8.2-sysvinit.patch.xz
new file mode 100644
index 0000000..6254c2d
--- /dev/null
+++ b/base/networkmanager/NetworkManager-0.9.8.2-sysvinit.patch.xz
diff --git a/base/networkmanager/NetworkManager-0.9.8.2-warnflags.patch.xz b/base/networkmanager/NetworkManager-0.9.8.2-warnflags.patch.xz
new file mode 100644
index 0000000..dfa0fc6
--- /dev/null
+++ b/base/networkmanager/NetworkManager-0.9.8.2-warnflags.patch.xz
diff --git a/base/networkmanager/networkmanager.build b/base/networkmanager/networkmanager.build
new file mode 100755
index 0000000..b60847f
--- /dev/null
+++ b/base/networkmanager/networkmanager.build
@@ -0,0 +1,133 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=networkmanager
+MAJOR=0.9
+VERSION=${MAJOR}.8.2
+BUILD=1
+DEPENDS=('glib >= 2.36.0-1' 'dbus >= 1.6.8-1' 'udev >= 173-1' 'gnutls >= 3.2.1-1' 'tcpip >= 20130209-1' 'libsoup >= 2.42.0-1')
+OPTDEPENDS=('ppp >= 2.4.5-1' 'wireless >= 20130324-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: networkmanager
+${NAME}:
+${NAME}: NetworkManager attempts to keep an active network connection 
+${NAME}: available at all times. The point of NetworkManager is to make
+${NAME}: networking configuration and setup as painless and automatic as
+${NAME}: possible.
+${NAME}:
+${NAME}: Homepage: http://projects.gnome.org/NetworkManager
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+cat > ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+preserve_perms() {
+  NEW="\$1"
+  OLD="\$(dirname \${NEW})/\$(basename \${NEW} .new)"
+  if [ -e \${OLD} ]; then
+    cp -a \${OLD} \${NEW}.incoming
+    cat \${NEW} > \${NEW}.incoming
+    mv \${NEW}.incoming \${NEW}
+  fi
+  config \${NEW}
+}
+
+if [ ! -d run/networkmanager ]; then
+  install -d -m 0755 run/networkmanager
+fi
+
+if [ -e etc/HOSTNAME ]; then
+  sed -i "s|@myhostname@|\$(cat etc/HOSTNAME | cut -f1 -d .)|g" \
+    etc/NetworkManager/NetworkManager.conf.new
+fi
+
+preserve_perms etc/rc.d/rc.networkmanager.new
+config etc/NetworkManager/NetworkManager.conf.new
+EOF
+
+# Sources
+
+SRCNAME[0]=NetworkManager
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=${URL[gnome]}/${SRCNAME[0]}/${MAJOR}/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' $(find . -name "Makefile.in")
+sed -i 's|pkglibdir = $(libdir)/@PACKAGE@|pkglibdir = $(libdir)/plugins/@PACKAGE@|g' $(find . -name "Makefile.in")
+sed -i 's|$(UDEV_BASE_DIR)/rules.d|$(UDEV_BASE_DIR)|g' callouts/Makefile.in
+sed -i 's|CKDB_PATH=/var/run/ConsoleKit/database|CKDB_PATH=/run/consolekit/database|g' configure
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --disable-rpath \
+ --enable-static=no \
+ --enable-shared=yes \
+ --enable-introspection=no \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --libexecdir="${SYS_DIR[lib]}/exec" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-html-dir="${SYS_DIR[html]}" \
+ --with-system-ca-path="${SYS_DIR[share]}/ca-certificates" \
+ --with-systemdsystemunitdir="${SYS_DIR[systemdsystemunitdir]}" \
+ --with-udev-dir="${SYS_DIR[udevrules]}" \
+ --with-pppd-plugin-dir="${SYS_DIR[lib]}/plugins/pppd/2.4.5" \
+ --with-session-tracking=consolekit \
+ --with-suspend-resume=upower \
+ --with-crypto=gnutls \
+ --with-dhcpcd="${SYS_DIR[sbin]}/dhcpcd" \
+ --with-dhclient=yes \
+ --disable-qt \
+ --enable-modify-system \
+ --enable-polkit \
+ --enable-ppp \
+ --enable-concheck
+#FIXME: systemd
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog NEWS
+install.dir ${PKG}${SYS_DIR[etc]}/rc.d
+install.dat rc.networkmanager.new ${PKG}${SYS_DIR[etc]}/rc.d
+install.cfg NetworkManager.conf.new ${PKG}${SYS_DIR[etc]}/NetworkManager
+rmdir ${PKG}${SYS_DIR[lib]}/plugins/NetworkManager
+rm -rf \
+ ${PKG}${SYS_DIR[var]}/run \
+ ${PKG}${SYS_DIR[html]}/libnm-*
+}
diff --git a/base/pam/Linux-PAM-1.1.6-audiolimits.patch.xz b/base/pam/Linux-PAM-1.1.6-audiolimits.patch.xz
new file mode 100644
index 0000000..ba1ff44
--- /dev/null
+++ b/base/pam/Linux-PAM-1.1.6-audiolimits.patch.xz
diff --git a/base/pam/Linux-PAM-1.1.6-cryptnullcheck.patch.xz b/base/pam/Linux-PAM-1.1.6-cryptnullcheck.patch.xz
new file mode 100644
index 0000000..b507eb9
--- /dev/null
+++ b/base/pam/Linux-PAM-1.1.6-cryptnullcheck.patch.xz
diff --git a/base/pam/Linux-PAM-1.1.6-faillock.patch.xz b/base/pam/Linux-PAM-1.1.6-faillock.patch.xz
new file mode 100644
index 0000000..9603580
--- /dev/null
+++ b/base/pam/Linux-PAM-1.1.6-faillock.patch.xz
diff --git a/base/pam/Linux-PAM-1.1.6-lastlogretval.patch.xz b/base/pam/Linux-PAM-1.1.6-lastlogretval.patch.xz
new file mode 100644
index 0000000..3967b4e
--- /dev/null
+++ b/base/pam/Linux-PAM-1.1.6-lastlogretval.patch.xz
diff --git a/base/pam/Linux-PAM-1.1.6-limitsuser.patch.xz b/base/pam/Linux-PAM-1.1.6-limitsuser.patch.xz
new file mode 100644
index 0000000..68e3bba
--- /dev/null
+++ b/base/pam/Linux-PAM-1.1.6-limitsuser.patch.xz
diff --git a/base/pam/Linux-PAM-1.1.6-namespacedestdir.patch.xz b/base/pam/Linux-PAM-1.1.6-namespacedestdir.patch.xz
new file mode 100644
index 0000000..acfd571
--- /dev/null
+++ b/base/pam/Linux-PAM-1.1.6-namespacedestdir.patch.xz
diff --git a/base/pam/Linux-PAM-1.1.6-namespacemntopts.patch.xz b/base/pam/Linux-PAM-1.1.6-namespacemntopts.patch.xz
new file mode 100644
index 0000000..7660ee8
--- /dev/null
+++ b/base/pam/Linux-PAM-1.1.6-namespacemntopts.patch.xz
diff --git a/base/pam/Linux-PAM-1.1.6-notally.patch.xz b/base/pam/Linux-PAM-1.1.6-notally.patch.xz
new file mode 100644
index 0000000..231fd8d
--- /dev/null
+++ b/base/pam/Linux-PAM-1.1.6-notally.patch.xz
diff --git a/base/pam/Linux-PAM-1.1.6-nouserenv.patch.xz b/base/pam/Linux-PAM-1.1.6-nouserenv.patch.xz
new file mode 100644
index 0000000..71ba366
--- /dev/null
+++ b/base/pam/Linux-PAM-1.1.6-nouserenv.patch.xz
diff --git a/base/pam/Linux-PAM-1.1.6-rundir.patch.xz b/base/pam/Linux-PAM-1.1.6-rundir.patch.xz
new file mode 100644
index 0000000..f00297c
--- /dev/null
+++ b/base/pam/Linux-PAM-1.1.6-rundir.patch.xz
diff --git a/base/pam/Linux-PAM-1.1.6-stdnoclose.patch.xz b/base/pam/Linux-PAM-1.1.6-stdnoclose.patch.xz
new file mode 100644
index 0000000..2af77a5
--- /dev/null
+++ b/base/pam/Linux-PAM-1.1.6-stdnoclose.patch.xz
diff --git a/base/pam/Linux-PAM-1.1.6-strictaliasing.patch.xz b/base/pam/Linux-PAM-1.1.6-strictaliasing.patch.xz
new file mode 100644
index 0000000..cbd9959
--- /dev/null
+++ b/base/pam/Linux-PAM-1.1.6-strictaliasing.patch.xz
diff --git a/base/pam/Linux-PAM-1.1.6-tmpfilesd.patch.xz b/base/pam/Linux-PAM-1.1.6-tmpfilesd.patch.xz
new file mode 100644
index 0000000..e6b59a8
--- /dev/null
+++ b/base/pam/Linux-PAM-1.1.6-tmpfilesd.patch.xz
diff --git a/base/pam/pam.build b/base/pam/pam.build
new file mode 100755
index 0000000..5124f8d
--- /dev/null
+++ b/base/pam/pam.build
@@ -0,0 +1,166 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=pam
+VERSION=1.1.6
+BUILD=3
+DEPENDS=('cracklib >= 2.8.22-1' 'libdb >= 5.3.21-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: pam (pluggable authentication modules)
+${NAME}:
+${NAME}: PAM is a system security tool that allows system administrators to
+${NAME}: set authentication policy without having to recompile programs that
+${NAME}: handle authentication.
+${NAME}:
+${NAME}: Homepage: http://www.us.kernel.org/pub/linux/libs/pam/index.html
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+if [ ! -d run/faillock ]; then
+  install -m 0755 -d run/faillock
+fi
+
+config etc/security/access.conf.new
+config etc/security/group.conf.new
+config etc/security/limits.conf.new
+config etc/security/namespace.conf.new
+config etc/security/namespace.init.new
+config etc/security/pam_env.conf.new
+config etc/security/time.conf.new
+config etc/default/passwd.new
+config etc/environment.new
+config etc/pam.d/other.new
+config etc/pam.d/system-auth.new
+config etc/pam.d/system-local-login.new
+config etc/pam.d/system-login.new
+config etc/pam.d/system-remote-login.new
+config etc/pam.d/system-services.new
+config var/log/tallylog.new
+rm -f var/log/tallylog.new
+EOF
+
+#TODO: when switching to PAM remember to enable /usr/bin/login in 'util-linux'
+#      and disable /usr/bin/login in 'shadow'.
+
+#NOTE: Maybe /etc/environment should be in another package
+
+# Sources
+
+SRCNAME[0]=Linux-PAM
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=https://fedorahosted.org/releases/l/i/linux-pam/${SRCNAME[0]}-${SRCVERS[0]}.tar.bz2
+SRCCOPY[0]="BSD3 GPL2"
+
+build0()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-rpath \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --sbindir="${SYS_DIR[sbin]}" \
+ --disable-audit \
+ --disable-selinux \
+ --disable-prelude \
+ --enable-securedir="${SYS_DIR[lib]}/plugins/security" \
+ --enable-isadir="../../${SYS_DIR[lib]}/plugins/security" 
+make ${JOBS}
+make install DESTDIR="${PKG}" SCONFIGDIR="${SYS_DIR[etc]}/security"
+doc AUTHORS
+changelog NEWS
+config ${PKG}${SYS_DIR[etc]}/security/{access,group,limits,namespace,pam_env,time}.conf
+config ${PKG}${SYS_DIR[etc]}/security/namespace.init
+config ${PKG}${SYS_DIR[etc]}/environment
+install.dir ${PKG}${SYS_DIR[etc]}/tmpfiles.d
+install.cfg pam.conf.tmpfiles ${PKG}${SYS_DIR[etc]}/tmpfiles.d/pam.conf
+install.dir ${PKG}${SYS_DIR[var]}/log
+install -m 0600 /dev/null ${PKG}${SYS_DIR[var]}/log/tallylog.new
+chmod 4755 ${PKG}${SYS_DIR[sbin]}/unix_chkpwd
+chmod 0700 ${PKG}${SYS_DIR[sbin]}/unix_update
+rm -rf \
+ ${PKG}${SYS_DIR[doc]}/Linux-PAM
+# Compatibility stuff
+(
+  cd ${PKG}${SYS_DIR[lib]}/plugins/security
+  ln -s pam_unix.so pam_unix_acct.so
+  ln -s pam_unix.so pam_unix_auth.so
+  ln -s pam_unix.so pam_unix_passwd.so
+  ln -s pam_unix.so pam_unix_session.so
+)
+}
+
+SRCNAME[1]=pam_unix2
+SRCVERS[1]=2.9.1
+SRCPACK[1]=http://archlinux.c3sl.ufpr.br/other/pam_unix2/${SRCNAME[1]}-${SRCVERS[1]}.tar.bz2
+SRCCOPY[1]="GPL2"
+
+build1()
+{
+sed -i 's|$(libdir)/security|$(libdir)/plugins/security|g' src/Makefile.{in,am}
+LDFLAGS="-L${PKG}${SYS_DIR[lib]}" \
+CPPFLAGS="-I${PKG}${SYS_DIR[include]}" \
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-rpath \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}"
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS THANKS
+changelog NEWS
+config ${PKG}${SYS_DIR[etc]}/default/passwd
+}
+
+SRCNAME[2]=pam-policy
+SRCVERS[2]=$(date +%Y%m%d)
+# TODO: broken. Files are included in this repo.
+
+build2()
+{
+make install-pam-package DESTDIR="${PKG}" EXT=".new"
+}
diff --git a/base/pam/pam_unix2-2.9.1-glibc216.patch.xz b/base/pam/pam_unix2-2.9.1-glibc216.patch.xz
new file mode 100644
index 0000000..ddc7fc3
--- /dev/null
+++ b/base/pam/pam_unix2-2.9.1-glibc216.patch.xz
diff --git a/base/parted/parted.build b/base/parted/parted.build
new file mode 100755
index 0000000..bc2fc31
--- /dev/null
+++ b/base/parted/parted.build
@@ -0,0 +1,84 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=parted
+VERSION=3.1
+BUILD=2
+DEPENDS=('udev >= 173-1' 'lvm >= 2.02.98-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: parted (partition editor)
+${NAME}:
+${NAME}: A program that manipulates partition tables. This is useful for
+${NAME}: creating space for new operating systems, reorganizing disk usage,
+${NAME}: copying data on hard disks and disk imaging. The package contains a
+${NAME}: library, libparted, as well as a command-line frontend, parted, which
+${NAME}: can also be used in scripts.
+${NAME}:
+${NAME}: Homepage: http://www.gnu.org/software/parted
+${NAME}:
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+install_info()
+{
+  for file in "\${*}"; do
+    if [ -x usr/bin/install-info ]; then
+      usr/bin/install-info --info-dir=usr/share/info usr/share/info/\${file}.info.xz 2> /dev/null
+    fi
+  done
+}
+
+# Install texinfo files
+
+install_info parted
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=${URL[gnu]}/${SRCNAME[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+SRCCOPY[0]="GPL3"
+
+build0()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.in
+#FIXME: workaround for failing test for ext2_fs.h
+ac_cv_header_linux_ext2_fs_h="yes" \
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --disable-rpath \
+ --enable-static=no \
+ --enable-shared=yes \
+ --enable-debug=no \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --infodir="${SYS_DIR[info]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}"
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+doc AUTHORS THANKS
+changelog NEWS
+}
diff --git a/base/pci/pci.build b/base/pci/pci.build
new file mode 100755
index 0000000..da01109
--- /dev/null
+++ b/base/pci/pci.build
@@ -0,0 +1,104 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=pci
+VERSION=$(date '+%Y%m%d')
+BUILD=1
+DEPENDS=('kmod >= 12-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: pci (PCI bus support)
+${NAME}:
+${NAME}: The Peripheral Component Interconnect (PCI) is a bus for attaching
+${NAME}: hardware devices in a computer. The vast majority of today's personal
+${NAME}: computers have this.
+${NAME}:
+${NAME}: This package is a collection of programs and libraries for accessing,  
+${NAME}: inspecting and manipulating configuration of PCI devices.
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=pciutils
+SRCVERS[0]=3.2.0
+SRCPACK[0]=ftp://ftp.kernel.org/pub/software/utils/${SRCNAME[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+make ${JOBS} \
+ OPT="${FLAGS}" \
+ PREFIX="${SYS_DIR[usr]}" \
+ SBINDIR="${SYS_DIR[sbin]}" \
+ LIBDIR="${SYS_DIR[lib]}" \
+ SHAREDIR="${SYS_DIR[share]}/hwdata" \
+ MANDIR="${SYS_DIR[man]}"
+make install install-lib \
+ DESTDIR="${PKG}" \
+ PREFIX="${SYS_DIR[usr]}" \
+ SBINDIR="${SYS_DIR[sbin]}" \
+ LIBDIR="${SYS_DIR[lib]}" \
+ SHAREDIR="${SYS_DIR[share]}/hwdata" \
+ MANDIR="${SYS_DIR[man]}" \
+ PKGCFDIR="${SYS_DIR[share]}/pkgconfig"
+changelog ChangeLog
+install.dir ${PKG}${SYS_DIR[bin]}
+rm -f \
+ ${PKG}${SYS_DIR[share]}/hwdata/pci.ids.gz
+}
+
+SRCNAME[1]=pciids
+SRCVERS[1]=$(date "+%Y%m%d")
+SRCPACK[1]=http://pciids.sourceforge.net/pci.ids
+SRCOPTS[1]="nosrcroot nounpack"
+
+build1()
+{
+install.dir ${PKG}${SYS_DIR[share]}/hwdata
+rm -f ${PKG}${SYS_DIR[share]}/hwdata/pci.ids
+cat ${CWD}/pci.ids | gzip -9nf > ${PKG}${SYS_DIR[share]}/hwdata/pci.ids.gz
+}
+
+SRCNAME[2]=libpciaccess
+SRCVERS[2]=0.13.1
+SRCPACK[2]=http://xorg.freedesktop.org/archive/individual/lib/${SRCNAME[2]}-${SRCVERS[2]}.tar.bz2
+
+build2()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.in
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-pciids-path="${SYS_DIR[share]}/hwdata" \
+ --with-zlib
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog ChangeLog
+license COPYING
+}
diff --git a/base/pci/pciutils-3.2.0-makefile.patch.xz b/base/pci/pciutils-3.2.0-makefile.patch.xz
new file mode 100644
index 0000000..5d61665
--- /dev/null
+++ b/base/pci/pciutils-3.2.0-makefile.patch.xz
diff --git a/base/policykit/polkit-0.105-ckdatabase.patch.xz b/base/policykit/polkit-0.105-ckdatabase.patch.xz
new file mode 100644
index 0000000..c197d39
--- /dev/null
+++ b/base/policykit/polkit-0.105-ckdatabase.patch.xz
diff --git a/base/policykit/polkit-0.105-config.patch.xz b/base/policykit/polkit-0.105-config.patch.xz
new file mode 100644
index 0000000..a6fd57e
--- /dev/null
+++ b/base/policykit/polkit-0.105-config.patch.xz
diff --git a/base/policykit/polkit-0.105-extensiondir.patch.xz b/base/policykit/polkit-0.105-extensiondir.patch.xz
new file mode 100644
index 0000000..f052a12
--- /dev/null
+++ b/base/policykit/polkit-0.105-extensiondir.patch.xz
diff --git a/base/policykit/polkit-0.105-fixxauthority.patch.xz b/base/policykit/polkit-0.105-fixxauthority.patch.xz
new file mode 100644
index 0000000..b8bc044
--- /dev/null
+++ b/base/policykit/polkit-0.105-fixxauthority.patch.xz
diff --git a/base/policykit/polkit.build b/base/policykit/polkit.build
new file mode 100755
index 0000000..0923beb
--- /dev/null
+++ b/base/policykit/polkit.build
@@ -0,0 +1,95 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=policykit
+VERSION=0.105
+BUILD=3
+DEPENDS=('glib >= 2.36.0-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: policykit (authentication framework)
+${NAME}:
+${NAME}: PolicyKit is an application-level toolkit for defining and handling
+${NAME}: the policy that allows unprivileged processes to speak to privileged
+${NAME}: processes. PolicyKit is specifically targeting applications in rich
+${NAME}: desktop environments on multi-user UNIX-like operating systems.
+${NAME}:
+${NAME}: Homepage: http://www.freedesktop.org/wiki/Software/PolicyKit
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/polkit-1/localauthority/50-local.d/20-plugdev-group-mount-override.pkla.new
+config etc/polkit-1/localauthority/50-local.d/10-org.freedesktop.NetworkManager.pkla.new
+EOF
+
+# Sources
+
+SRCNAME[0]=polkit
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://hal.freedesktop.org/releases/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="LGPL2"
+
+build0()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' $(find . -name "Makefile.in")
+sed -i 's|$(libdir)/polkit-1/extensions|$(libdir)/plugins/polkit-1|g' $(find . -name "Makefile.in")
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --disable-introspection \
+ --disable-examples \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --libexecdir="${SYS_DIR[lib]}/exec" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-html-dir="${SYS_DIR[html]}" \
+ --with-authfw=shadow \
+ --with-os-type=Slackware \
+ --enable-verbose-mode
+#FIXME: pam support
+#FIXME: systemd support
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+changelog NEWS
+install.dat *.pkla.new ${PKG}${SYS_DIR[etc]}/polkit-1/localauthority/50-local.d
+# Fix your scripty shit polkit people
+#  --enable-man-pages=no \
+# rm -rf ${PKG}${SYS_DIR[man]}
+}
diff --git a/base/power/pm-utils-1.4.1-bluetooth.patch.xz b/base/power/pm-utils-1.4.1-bluetooth.patch.xz
new file mode 100644
index 0000000..67b52c6
--- /dev/null
+++ b/base/power/pm-utils-1.4.1-bluetooth.patch.xz
diff --git a/base/power/pm-utils-1.4.1-disablesataalpm.patch.xz b/base/power/pm-utils-1.4.1-disablesataalpm.patch.xz
new file mode 100644
index 0000000..6650487
--- /dev/null
+++ b/base/power/pm-utils-1.4.1-disablesataalpm.patch.xz
diff --git a/base/power/pm-utils-1.4.1-loggingappend.patch.xz b/base/power/pm-utils-1.4.1-loggingappend.patch.xz
new file mode 100644
index 0000000..e1ab840
--- /dev/null
+++ b/base/power/pm-utils-1.4.1-loggingappend.patch.xz
diff --git a/base/power/pm-utils-1.4.1-rundir.patch.xz b/base/power/pm-utils-1.4.1-rundir.patch.xz
new file mode 100644
index 0000000..e858a68
--- /dev/null
+++ b/base/power/pm-utils-1.4.1-rundir.patch.xz
diff --git a/base/power/pm-utils-1.4.1-saneharddrivedefaults.patch.xz b/base/power/pm-utils-1.4.1-saneharddrivedefaults.patch.xz
new file mode 100644
index 0000000..8eb4045
--- /dev/null
+++ b/base/power/pm-utils-1.4.1-saneharddrivedefaults.patch.xz
diff --git a/base/power/pm-utils-1.4.1-slackware.patch.xz b/base/power/pm-utils-1.4.1-slackware.patch.xz
new file mode 100644
index 0000000..ece83db
--- /dev/null
+++ b/base/power/pm-utils-1.4.1-slackware.patch.xz
diff --git a/base/power/pm-utils-1.4.1-wrongpathintelaudio.patch.xz b/base/power/pm-utils-1.4.1-wrongpathintelaudio.patch.xz
new file mode 100644
index 0000000..1efa094
--- /dev/null
+++ b/base/power/pm-utils-1.4.1-wrongpathintelaudio.patch.xz
diff --git a/base/power/power.build b/base/power/power.build
new file mode 100755
index 0000000..f8a8215
--- /dev/null
+++ b/base/power/power.build
@@ -0,0 +1,145 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=power
+VERSION=0.9.19
+BUILD=2
+DEPENDS=('glib >= 2.34.3-1' 'dbus_glib >= 0.100.2-1' 'udev >= 173-1' 'polkit >= 0.105-1' 'usb >= 1.0.14-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: upower
+${NAME}:
+${NAME}: An abstraction for enumerating power devices, listening to device
+${NAME}: events and querying history and statistics. Any application or
+${NAME}: service on the system can access the org.freedesktop.UPower service
+${NAME}: via the system message bus. Some operations (such as suspending the
+${NAME}: system) are restricted using polkit. UPower is also useful to control
+${NAME}: the latency of different operations on your computer, which enables
+${NAME}: you to save significant amounts of power.
+${NAME}:
+${NAME}: Homepage: http://upower.freedesktop.org
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/UPower/UPower.conf.new
+EOF
+
+# Sources
+
+SRCNAME[0]=upower
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://upower.freedesktop.org/releases/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.in
+sed -i 's|$(slashlibdir)/udev/rules.d|$(datarootdir)/udev/rules|g' rules/Makefile.in
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --disable-rpath \
+ --enable-static=no \
+ --enable-shared=yes \
+ --enable-introspection=no \
+ --enable-man-pages=no \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --libexecdir="${SYS_DIR[lib]}/exec" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-html-dir="${SYS_DIR[html]}" \
+ --with-systemdsystemunitdir="${SYS_DIR[systemdsystemunitdir]}" \
+ --with-backend=linux
+#FIXME: systemd
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog NEWS
+config ${PKG}${SYS_DIR[etc]}/UPower/UPower.conf
+}
+
+SRCNAME[1]=cpufrequtils
+SRCVERS[1]=008
+SRCPACK[1]=http://www.kernel.org/pub/linux/utils/kernel/cpufreq/${SRCNAME[1]}-${SRCVERS[1]}.tar.bz2
+SRCCOPY[1]="GPL2"
+
+build1()
+{
+make ${JOBS} \
+ V="true" \
+ PROC="false" \
+ OPTIMIZATION="${FLAGS}"
+make install DESTDIR="${PKG}" libdir="${SYS_DIR[lib]}"
+doc AUTHORS
+rm -f ${PKG}${SYS_DIR[lib]}/*.a
+}
+
+SRCNAME[2]=pm-utils
+SRCVERS[2]=1.4.1
+SRCPACK[2]=http://pm-utils.freedesktop.org/releases/${SRCNAME[2]}-${SRCVERS[2]}.tar.gz
+SRCCOPY[2]="GPL2"
+
+PMUTILSLIBDIR=${SYS_DIR[share]}/pm-utils
+
+build2()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.in
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[share]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --docdir="${SYS_DIR[doc]}/${SRCNAME[2]}-${SRCVERS[2]}"
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS README.SLACKWARE
+changelog ChangeLog
+rm -f ${PKG}${PMUTILSLIBDIR}/{sleep.d/55NetworkManager,power.d/{harddrive,disable_wol,hal-cd-polling}}
+}
+
+SRCNAME[3]=pm-quirks
+SRCVERS[3]=20100619
+SRCPACK[3]=http://pm-utils.freedesktop.org/releases/${SRCNAME[3]}-${SRCVERS[3]}.tar.gz
+SRCROOT[3]=video-quirks
+
+build3()
+{
+install.dir ${PKG}${PMUTILSLIBDIR}/video-quirks
+install.dat *.quirkdb ${PKG}${PMUTILSLIBDIR}/video-quirks
+}
diff --git a/base/ppp/ppp-2.4.5-optflags.patch.xz b/base/ppp/ppp-2.4.5-optflags.patch.xz
new file mode 100644
index 0000000..cf689c7
--- /dev/null
+++ b/base/ppp/ppp-2.4.5-optflags.patch.xz
diff --git a/base/ppp/ppp-2.4.5-options.patch.xz b/base/ppp/ppp-2.4.5-options.patch.xz
new file mode 100644
index 0000000..01d7346
--- /dev/null
+++ b/base/ppp/ppp-2.4.5-options.patch.xz
diff --git a/base/ppp/ppp-2.4.5-pcaplink.patch.xz b/base/ppp/ppp-2.4.5-pcaplink.patch.xz
new file mode 100644
index 0000000..7f091a6
--- /dev/null
+++ b/base/ppp/ppp-2.4.5-pcaplink.patch.xz
diff --git a/base/ppp/ppp.build b/base/ppp/ppp.build
new file mode 100755
index 0000000..74e87a6
--- /dev/null
+++ b/base/ppp/ppp.build
@@ -0,0 +1,121 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=ppp
+VERSION=2.4.5
+BUILD=1
+DEPENDS=('tcpip >= 20130209-1')
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: ppp (Point-to-Point Protocol)
+${NAME}:
+${NAME}: The Point-to-Point Protocol (PPP) provides a method for transmitting
+${NAME}: data over serial links. It's commonly used for connecting to the
+${NAME}: Internet using a modem.
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/ppp/chap-secrets.new
+config etc/ppp/options.new
+config etc/ppp/pap-secrets.new
+
+config etc/radiusclient-ng/issue.new
+config etc/radiusclient-ng/radiusclient.conf.new
+config etc/radiusclient-ng/realms.new
+config etc/radiusclient-ng/servers.new
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=ftp://ftp.samba.org/pub/ppp/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+# Fix build error with recent kernels
+rm include/linux/if_pppol2tp.h
+# enable active filter
+sed -i "s:^#FILTER=y:FILTER=y:" pppd/Makefile.linux
+# enable ipv6 support
+sed -i "s:^#HAVE_INET6=y:HAVE_INET6=y:" pppd/Makefile.linux
+# Enable Microsoft proprietary Callback Control Protocol
+sed -i "s:^#CBCP=y:CBCP=y:" pppd/Makefile.linux 
+# Install the plugins at the right spot
+sed -i "s|lib/pppd|lib/plugins/pppd|g" $(grep -lr 'lib/pppd' *)
+./configure \
+ --prefix="${SYS_DIR[usr]}"
+make ${JOBS} OPT="${FLAGS} -D_GNU_SOURCE"
+make install DESTDIR="${PKG}/usr"
+doc README
+chmod 0755 ${PKG}${SYS_DIR[lib]}/plugins/pppd/*/*.so
+(
+  install.dir ${PKG}${SYS_DIR[etc]}/ppp
+  install.cfg etc.ppp/options ${PKG}${SYS_DIR[etc]}/ppp/options.new
+  install -m 0600 etc.ppp/chap-secrets ${PKG}${SYS_DIR[etc]}/ppp/chap-secrets.new
+  install -m 0600 etc.ppp/pap-secrets ${PKG}${SYS_DIR[etc]}/ppp/pap-secrets.new
+)
+}
+
+SRCNAME[1]=radiusclient-ng
+SRCVERS[1]=0.5.6
+SRCPACK[1]=${URL[sf]}/${SRCNAME[1]}.berlios/${SRCNAME[1]}-${SRCVERS[1]}.tar.gz
+
+build1()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}"
+make ${JOBS}
+make install DESTDIR="${PKG}"
+license COPYRIGHT
+changelog CHANGES
+config ${PKG}${SYS_DIR[etc]}/radiusclient-ng/radiusclient.conf
+config ${PKG}${SYS_DIR[etc]}/radiusclient-ng/issue
+config ${PKG}${SYS_DIR[etc]}/radiusclient-ng/servers
+config ${PKG}${SYS_DIR[etc]}/radiusclient-ng/realms
+chmod 0600 ${PKG}${SYS_DIR[etc]}/radiusclient-ng/{realms,servers}.new
+}
diff --git a/base/ppp/radiusclient-ng-0.5.6-extraconfig.patch.xz b/base/ppp/radiusclient-ng-0.5.6-extraconfig.patch.xz
new file mode 100644
index 0000000..cf79aa6
--- /dev/null
+++ b/base/ppp/radiusclient-ng-0.5.6-extraconfig.patch.xz
diff --git a/base/rfkill/rfkill-0.5-opts.patch.xz b/base/rfkill/rfkill-0.5-opts.patch.xz
new file mode 100644
index 0000000..089081b
--- /dev/null
+++ b/base/rfkill/rfkill-0.5-opts.patch.xz
diff --git a/base/rfkill/rfkill-0.5-udevrule.patch.xz b/base/rfkill/rfkill-0.5-udevrule.patch.xz
new file mode 100644
index 0000000..f51ddd5
--- /dev/null
+++ b/base/rfkill/rfkill-0.5-udevrule.patch.xz
diff --git a/base/rfkill/rfkill.build b/base/rfkill/rfkill.build
new file mode 100755
index 0000000..abb30ce
--- /dev/null
+++ b/base/rfkill/rfkill.build
@@ -0,0 +1,48 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=rfkill
+VERSION=0.5
+BUILD=1
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: rfkill (tool to query subsystem interfaces)
+${NAME}:
+${NAME}: rfkill is a small tool to query the state of the rfkill switches,
+${NAME}: buttons and subsystem interfaces.
+${NAME}:
+${NAME}: Homepage: http://linuxwireless.org/en/users/Documentation/rfkill
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=https://www.kernel.org/pub/software/network/rfkill/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+
+build0()
+{
+make ${JOBS} V=1 OPTS="${FLAGS}"
+make install DESTDIR="${PKG}"
+license COPYING
+install.dir ${PKG}${SYS_DIR[udevrules]}
+install.dat 60-rfkill.rules ${PKG}${SYS_DIR[udevrules]}
+}
diff --git a/base/scsi/lsscsi-0.27-manfix.patch.xz b/base/scsi/lsscsi-0.27-manfix.patch.xz
new file mode 100644
index 0000000..2e8f7ea
--- /dev/null
+++ b/base/scsi/lsscsi-0.27-manfix.patch.xz
diff --git a/base/scsi/scsi.build b/base/scsi/scsi.build
new file mode 100755
index 0000000..5c6e99d
--- /dev/null
+++ b/base/scsi/scsi.build
@@ -0,0 +1,112 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=scsi
+VERSION=1.36
+BUILD=1
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: scsi
+${NAME}:
+${NAME}: Library and utilities for SCSI devices. This includes devices on
+${NAME}: transports traditionally associated with SCSI such as Fibre Channel
+${NAME}: (FCP), Serial Attached SCSI (SAS) and the SCSI Parallel Interface
+${NAME}: (SPI). Many other devices use SCSI command sets. ATAPI CD/DVD
+${NAME}: drivers and SATA disks connect via a translation layer or a bridge
+${NAME}: device are examples of devices that use the SCSI command sets. This
+${NAME}: package includes the 'sdparm' and 'lsscsi' utilities.
+${NAME}:
+${NAME}: Homepage: http://sg.danny.cz
+EOF
+
+# Sources
+
+SRCNAME[0]=sg3_utils
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://sg.danny.cz/sg/p/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+SRCCOPY[0]="GPL2 BSD3"
+
+# lftpget http://www.garloff.de/kurt/linux/rescan-scsi-bus.sh
+
+build0()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --bindir="${SYS_DIR[sbin]}"
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS CREDITS
+changelog ChangeLog
+install.bin rescan-scsi-bus.sh \
+ ${PKG}${SYS_DIR[sbin]}/rescan-scsi-bus
+}
+
+SRCNAME[1]=lsscsi
+SRCVERS[1]=0.27
+SRCPACK[1]=http://sg.danny.cz/scsi/${SRCNAME[1]}-${SRCVERS[1]}.tgz
+SRCCOPY[1]="GPL2"
+
+build1()
+{
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}"
+make ${JOBS} CFLAGS+="${FLAGS}"
+make install DESTDIR="${PKG}"
+doc AUTHORS CREDITS
+changelog ChangeLog
+install.dir ${PKG}${SYS_DIR[man]}/man1
+mv \
+ ${PKG}${SYS_DIR[man]}/man8/lsscsi.8 \
+ ${PKG}${SYS_DIR[man]}/man1/lsscsi.1
+}
+
+SRCNAME[2]=sdparm
+SRCVERS[2]=1.07
+SRCPACK[2]=http://sg.danny.cz/sg/p/${SRCNAME[2]}-${SRCVERS[2]}.tgz
+SRCCOPY[2]="BSD3"
+
+build2()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --bindir="${SYS_DIR[sbin]}"
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS CREDITS
+changelog NEWS
+}
diff --git a/base/scsi/sg3_utils-1.36-rescanscsibus.patch.xz b/base/scsi/sg3_utils-1.36-rescanscsibus.patch.xz
new file mode 100644
index 0000000..db4f13d
--- /dev/null
+++ b/base/scsi/sg3_utils-1.36-rescanscsibus.patch.xz
diff --git a/base/sensors/lm_sensors-3.3.4-config.patch.xz b/base/sensors/lm_sensors-3.3.4-config.patch.xz
new file mode 100644
index 0000000..aed3011
--- /dev/null
+++ b/base/sensors/lm_sensors-3.3.4-config.patch.xz
diff --git a/base/sensors/sensors.build b/base/sensors/sensors.build
new file mode 100755
index 0000000..87ad7a4
--- /dev/null
+++ b/base/sensors/sensors.build
@@ -0,0 +1,73 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=sensors
+VERSION=3.3.4
+BUILD=1
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: sensors (hardware monitoring utilities)
+${NAME}:
+${NAME}: Utilities to monitor temperatures, voltages and fans.
+${NAME}:
+${NAME}: Homepage: http://www.lm-sensors.org
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/conf.d/sensors.conf.new
+EOF
+
+# Sources
+
+SRCNAME[0]=lm_sensors
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://dl.lm-sensors.org/lm-sensors/releases/${SRCNAME[0]}-${SRCVERS[0]}.tar.bz2
+SRCCOPY[0]="GPL LGPL21"
+
+build0()
+{
+make ${JOBS} CFLAGS="${FLAGS}" PREFIX="${SYS_DIR[usr]}" LIBDIR="${SYS_DIR[lib]}"
+make install DESTDIR="${PKG}" PREFIX="${SYS_DIR[usr]}" LIBDIR="${SYS_DIR[lib]}"
+doc CONTRIBUTORS
+changelog CHANGES
+mv \
+ ${PKG}${SYS_DIR[conf]}/sensors.conf \
+ ${PKG}${SYS_DIR[conf]}/sensors.conf.new
+rm -f \
+ ${PKG}${SYS_DIR[bin]}/sensors-conf-convert \
+ ${PKG}${SYS_DIR[lib]}/*.a
+}
diff --git a/base/softraid/mdadm-3.2.6-disablewerror.patch.xz b/base/softraid/mdadm-3.2.6-disablewerror.patch.xz
new file mode 100644
index 0000000..293e0de
--- /dev/null
+++ b/base/softraid/mdadm-3.2.6-disablewerror.patch.xz
diff --git a/base/softraid/mdadm-3.2.6-udevdir.patch.xz b/base/softraid/mdadm-3.2.6-udevdir.patch.xz
new file mode 100644
index 0000000..5e97671
--- /dev/null
+++ b/base/softraid/mdadm-3.2.6-udevdir.patch.xz
diff --git a/base/softraid/softraid.build b/base/softraid/softraid.build
new file mode 100755
index 0000000..8d7418e
--- /dev/null
+++ b/base/softraid/softraid.build
@@ -0,0 +1,80 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=softraid
+VERSION=3.2.6
+BUILD=2
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: softraid (manage software RAID arrays)
+${NAME}:
+${NAME}: Create, manage and monitor Linux MD (software RAID) devices.
+${NAME}:
+${NAME}: Homepage: http://neil.brown.name/blog/mdadm
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/mdadm.conf.new
+EOF
+
+# Sources
+
+SRCNAME[0]=mdadm
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://www.kernel.org/pub/linux/utils/raid/mdadm/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+make ${JOBS} CXFLAGS="${FLAGS}" CONFFILE2="${SYS_DIR[etc]}/mdadm.conf"
+make install \
+ MANDIR="${SYS_DIR[man]}" \
+ BINDIR="${SYS_DIR[sbin]}" \
+ UDEVDIR="${SYS_DIR[udevrules]}" \
+ DESTDIR="${PKG}"
+doc AUTHORS
+changelog ANNOUNCE-${SRCVERS[0]}
+install.dir ${PKG}${SYS_DIR[etc]}
+install.dat mdadm.conf-example ${PKG}${SYS_DIR[etc]}/mdadm.conf.new
+#FIXME: compat symlinks
+install.dir ${PKG}/sbin
+(
+  cd ${PKG}/sbin
+  ln -sf /usr/sbin/mdadm
+  ln -sf /usr/sbin/mdmon
+)
+}
diff --git a/base/sound/alsa-utils-1.0.27-alsactlbufferoverflow.patch.xz b/base/sound/alsa-utils-1.0.27-alsactlbufferoverflow.patch.xz
new file mode 100644
index 0000000..e9c2ed9
--- /dev/null
+++ b/base/sound/alsa-utils-1.0.27-alsactlbufferoverflow.patch.xz
diff --git a/base/sound/alsa-utils-1.0.27-arecord.patch.xz b/base/sound/alsa-utils-1.0.27-arecord.patch.xz
new file mode 100644
index 0000000..64915ae
--- /dev/null
+++ b/base/sound/alsa-utils-1.0.27-arecord.patch.xz
diff --git a/base/sound/alsa-utils-1.0.27-desktopfile.patch.xz b/base/sound/alsa-utils-1.0.27-desktopfile.patch.xz
new file mode 100644
index 0000000..7b2dc7e
--- /dev/null
+++ b/base/sound/alsa-utils-1.0.27-desktopfile.patch.xz
diff --git a/base/sound/alsa-utils-1.0.27-manfix.patch.xz b/base/sound/alsa-utils-1.0.27-manfix.patch.xz
new file mode 100644
index 0000000..46cb33a
--- /dev/null
+++ b/base/sound/alsa-utils-1.0.27-manfix.patch.xz
diff --git a/base/sound/alsa-utils-1.0.27-pcsp.patch.xz b/base/sound/alsa-utils-1.0.27-pcsp.patch.xz
new file mode 100644
index 0000000..7d5a129
--- /dev/null
+++ b/base/sound/alsa-utils-1.0.27-pcsp.patch.xz
diff --git a/base/sound/alsa-utils-1.0.27-servicetypo.patch.xz b/base/sound/alsa-utils-1.0.27-servicetypo.patch.xz
new file mode 100644
index 0000000..5e689ff
--- /dev/null
+++ b/base/sound/alsa-utils-1.0.27-servicetypo.patch.xz
diff --git a/base/sound/alsa-utils-1.0.27-sysvinit.patch.xz b/base/sound/alsa-utils-1.0.27-sysvinit.patch.xz
new file mode 100644
index 0000000..c602034
--- /dev/null
+++ b/base/sound/alsa-utils-1.0.27-sysvinit.patch.xz
diff --git a/base/sound/alsa-utils-1.0.27-tmpfilesd.patch.xz b/base/sound/alsa-utils-1.0.27-tmpfilesd.patch.xz
new file mode 100644
index 0000000..b2d7785
--- /dev/null
+++ b/base/sound/alsa-utils-1.0.27-tmpfilesd.patch.xz
diff --git a/base/sound/sound.build b/base/sound/sound.build
new file mode 100755
index 0000000..7125abc
--- /dev/null
+++ b/base/sound/sound.build
@@ -0,0 +1,132 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=sound
+VERSION=1.0.27
+BUILD=1
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: sound (Advanced Linux Sound Architecture)
+${NAME}:
+${NAME}: The Advanced Linux Sound Architecture (ALSA) provides audio and MIDI
+${NAME}: functionality to the Linux operating system.
+${NAME}:
+${NAME}: This package provides the ALSA libraries and utilities.
+${NAME}:
+${NAME}: Homepage: http://alsa-project.org
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/modprobe.d/snd-pcsp.conf.new
+config etc/rc.d/rc.alsa.new
+
+if [ ! -d run/alsactl ]; then
+  install -d -m 0755 run/alsactl
+fi
+EOF
+
+# Sources
+
+ALSAREPO="ftp://ftp.alsa-project.org/pub/lib"
+
+SRCNAME[0]=alsa-lib
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=${ALSAREPO}/${SRCNAME[0]}-${SRCVERS[0]}.tar.bz2
+SRCCOPY[0]="LGPL21"
+
+build0()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}/alsa" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --disable-python \
+ --with-configdir="${SYS_DIR[share]}/alsa" \
+ --with-plugindir="${SYS_DIR[lib]}/plugins/alsa-1" \
+ --with-pkgconfdir="${SYS_DIR[share]}/pkgconfig"
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+install.dir ${PKG}${SYS_DIR[etc]}/alsa
+install.dat doc/asoundrc.txt ${PKG}${SYS_DIR[etc]}/alsa/asoundrc.sample
+}
+
+SRCNAME[1]=alsa-utils
+SRCVERS[1]=${VERSION}
+SRCPACK[1]=${ALSAREPO}/${SRCNAME[1]}-${SRCVERS[1]}.tar.bz2
+SRCCOPY[1]="GPL2"
+
+build1()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --disable-rpath \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}/alsa" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --disable-xmlto \
+ --disable-alsaconf \
+ --with-alsa-prefix="${PKG}${SYS_DIR[lib]}" \
+ --with-alsa-inc-prefix="${PKG}${SYS_DIR[include]}" \
+ --with-udev-rules-dir="${SYS_DIR[udevrules]}" \
+ --with-systemdsystemunitdir="${SYS_DIR[systemdsystemunitdir]}" \
+ --with-asound-state-dir="${SYS_DIR[var]}/lib/alsa" \
+ --with-alsactl-pidfile-dir="${SYS_DIR[run]}/alsactl"
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+install.dir ${PKG}${SYS_DIR[etc]}/{rc,modprobe,tmpfiles}.d
+install.cfg alsactl.conf.tmpfiles ${PKG}${SYS_DIR[etc]}/tmpfiles.d/alsactl.conf
+install.bin rc.alsa ${PKG}${SYS_DIR[etc]}/rc.d/rc.alsa.new
+install.cfg snd-pcsp.conf.modprobe ${PKG}${SYS_DIR[etc]}/modprobe.d/snd-pcsp.conf.new
+install.dir ${PKG}${SYS_DIR[share]}/applications
+install.dat alsamixer.desktop ${PKG}${SYS_DIR[share]}/applications
+mv \
+ ${PKG}${SYS_DIR[man]}/man7 \
+ ${PKG}${SYS_DIR[man]}/man8
+mv \
+ ${PKG}${SYS_DIR[man]}/man1/alsactl.1 \
+ ${PKG}${SYS_DIR[man]}/man8/alsactl.8
+}
diff --git a/base/spkg/spkg.build b/base/spkg/spkg.build
new file mode 100755
index 0000000..19a8764
--- /dev/null
+++ b/base/spkg/spkg.build
@@ -0,0 +1,62 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=spkg
+VERSION=1.0.1
+BUILD=1
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: spkg
+${NAME}:
+${NAME}: An unofficial Slackware Linux package manager written in C which can
+${NAME}: be used side by side with the traditional pkgtools. Besides from
+${NAME}: being much faster than pkgtools, it has also additional features
+${NAME}: such as safe mode, safe cancel, rollback and verbose mode amonst
+${NAME}: other things while still having a simple user interface.
+${NAME}:
+${NAME}: Homepage: http://spkg.megous.com
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+
+build0()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.{am,in}
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --enable-static=yes \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}"
+# --enable-static-spkg=only
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog NEWS
+rm -rf ${PKG}${SYS_DIR[usr]}/doc
+}
diff --git a/base/sudo/sudo-1.8.6p8-pamd.patch.xz b/base/sudo/sudo-1.8.6p8-pamd.patch.xz
new file mode 100644
index 0000000..abacdac
--- /dev/null
+++ b/base/sudo/sudo-1.8.6p8-pamd.patch.xz
diff --git a/base/sudo/sudo-1.8.6p8-tmpfiles.patch.xz b/base/sudo/sudo-1.8.6p8-tmpfiles.patch.xz
new file mode 100644
index 0000000..3854c14
--- /dev/null
+++ b/base/sudo/sudo-1.8.6p8-tmpfiles.patch.xz
diff --git a/base/sudo/sudo.build b/base/sudo/sudo.build
new file mode 100755
index 0000000..d567aff
--- /dev/null
+++ b/base/sudo/sudo.build
@@ -0,0 +1,109 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=sudo
+VERSION=1.8.6p8
+BUILD=1
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: sudo (give limited root privileges to certain users)
+${NAME}:
+${NAME}: 'sudo' is a command that allows users to execute some commands as
+${NAME}: root. The /etc/sudoers file (edited with 'visudo') specifies which
+${NAME}: users have access to sudo and which commands they can run. 'sudo'
+${NAME}: logs all its activities to /var/log/ so the system administrator
+${NAME}: can keep an eye on things.
+${NAME}:
+${NAME}: Homepage: http://www.sudo.ws
+${NAME}:
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/pam.d/sudo.new
+config etc/pam.d/sudo-i.new
+config etc/sudoers.new
+rm -f etc/sudoers.new
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://www.sudo.ws/sudo/dist/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="ISC"
+
+build0()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --libexecdir="${SYS_DIR[lib]}/plugins/sudo" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --sbindir="${SYS_DIR[sbin]}" \
+ --with-timedir="${SYS_DIR[run]}/sudo" \
+ --with-passprompt="[sudo] password for %p: " \
+ --with-logging="syslog" \
+ --with-logfac="authpriv" \
+ --with-editor="${SYS_DIR[bin]}/vi" \
+ --with-ignore-dot \
+ --with-tty-tickets \
+ --with-env-editor \
+ --with-pam \
+ --with-pam-login
+#NOTE: --with-linux-audit ?
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc doc/CONTRIBUTORS doc/UPGRADE doc/sample.{sudo.conf,sudoers}
+changelog NEWS
+install.dir ${PKG}${SYS_DIR[etc]}/{tmpfiles,pam}.d
+install.dat sudo.pam ${PKG}${SYS_DIR[etc]}/pam.d/sudo.new
+install.dat sudo.pam ${PKG}${SYS_DIR[etc]}/pam.d/sudo-i.new
+install.dat sudo.conf.tmpfiles ${PKG}${SYS_DIR[etc]}/tmpfiles.d/sudo.conf
+(
+  cd ${PKG}${SYS_DIR[bin]}
+  chmod 4711 sudo
+  ln -sf sudo sudoedit
+)
+rm -f ${PKG}${SYS_DIR[man]}/man8/sudoedit.8
+echo ".so man8/sudo.8" > ${PKG}${SYS_DIR[man]}/man8/sudoedit.8
+chmod 0755 ${PKG}${SYS_DIR[lib]}/plugins/sudo/*.so
+config ${PKG}${SYS_DIR[etc]}/sudoers
+rm -rf \
+ ${PKG}${SYS_DIR[run]} \
+ ${PKG}${SYS_DIR[doc]}/sudo
+}
diff --git a/base/tcpip/host-20070128-compile.patch.xz b/base/tcpip/host-20070128-compile.patch.xz
new file mode 100644
index 0000000..67d83ad
--- /dev/null
+++ b/base/tcpip/host-20070128-compile.patch.xz
diff --git a/base/tcpip/iproute2-3.7.0-datadir.patch.xz b/base/tcpip/iproute2-3.7.0-datadir.patch.xz
new file mode 100644
index 0000000..826ac43
--- /dev/null
+++ b/base/tcpip/iproute2-3.7.0-datadir.patch.xz
diff --git a/base/tcpip/iproute2-3.7.0-installman7.patch.xz b/base/tcpip/iproute2-3.7.0-installman7.patch.xz
new file mode 100644
index 0000000..c27d0c6
--- /dev/null
+++ b/base/tcpip/iproute2-3.7.0-installman7.patch.xz
diff --git a/base/tcpip/iputils-s20121221-install.patch.xz b/base/tcpip/iputils-s20121221-install.patch.xz
new file mode 100644
index 0000000..b785183
--- /dev/null
+++ b/base/tcpip/iputils-s20121221-install.patch.xz
diff --git a/base/tcpip/iputils-s20121221-ipmask.patch.xz b/base/tcpip/iputils-s20121221-ipmask.patch.xz
new file mode 100644
index 0000000..1b51bb3
--- /dev/null
+++ b/base/tcpip/iputils-s20121221-ipmask.patch.xz
diff --git a/base/tcpip/iputils-s20121221-manpages.patch.xz b/base/tcpip/iputils-s20121221-manpages.patch.xz
new file mode 100644
index 0000000..013fe28
--- /dev/null
+++ b/base/tcpip/iputils-s20121221-manpages.patch.xz
diff --git a/base/tcpip/iputils-s20121221-noinstall.patch.xz b/base/tcpip/iputils-s20121221-noinstall.patch.xz
new file mode 100644
index 0000000..9dd8ea4
--- /dev/null
+++ b/base/tcpip/iputils-s20121221-noinstall.patch.xz
diff --git a/base/tcpip/libpcap-1.3.0-autoconf.patch.xz b/base/tcpip/libpcap-1.3.0-autoconf.patch.xz
new file mode 100644
index 0000000..7e78543
--- /dev/null
+++ b/base/tcpip/libpcap-1.3.0-autoconf.patch.xz
diff --git a/base/tcpip/libpcap-1.3.0-libnl32.patch.xz b/base/tcpip/libpcap-1.3.0-libnl32.patch.xz
new file mode 100644
index 0000000..edc8edd
--- /dev/null
+++ b/base/tcpip/libpcap-1.3.0-libnl32.patch.xz
diff --git a/base/tcpip/net-tools-20130121-config.patch.xz b/base/tcpip/net-tools-20130121-config.patch.xz
new file mode 100644
index 0000000..9683ffa
--- /dev/null
+++ b/base/tcpip/net-tools-20130121-config.patch.xz
diff --git a/base/tcpip/net-tools-20130121-debian242.patch.xz b/base/tcpip/net-tools-20130121-debian242.patch.xz
new file mode 100644
index 0000000..a544220
--- /dev/null
+++ b/base/tcpip/net-tools-20130121-debian242.patch.xz
diff --git a/base/tcpip/net-tools-20130121-install.patch.xz b/base/tcpip/net-tools-20130121-install.patch.xz
new file mode 100644
index 0000000..0fd2fd2
--- /dev/null
+++ b/base/tcpip/net-tools-20130121-install.patch.xz
diff --git a/base/tcpip/net-tools-20130121-missingheaders.patch.xz b/base/tcpip/net-tools-20130121-missingheaders.patch.xz
new file mode 100644
index 0000000..ee76a47
--- /dev/null
+++ b/base/tcpip/net-tools-20130121-missingheaders.patch.xz
diff --git a/base/tcpip/tcp_wrappers-7.6-updates.patch.xz b/base/tcpip/tcp_wrappers-7.6-updates.patch.xz
new file mode 100644
index 0000000..d308009
--- /dev/null
+++ b/base/tcpip/tcp_wrappers-7.6-updates.patch.xz
diff --git a/base/tcpip/tcpip.build b/base/tcpip/tcpip.build
new file mode 100755
index 0000000..e6d5678
--- /dev/null
+++ b/base/tcpip/tcpip.build
@@ -0,0 +1,273 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=tcpip
+VERSION=$(date '+%Y%m%d')
+BUILD=1
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: tcpip
+${NAME}:
+${NAME}: Basic TCP/IP networking utilities and libraries.
+${NAME}:
+${NAME}: This package must be installed if you want network or Internet
+${NAME}: access.
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+install_info()
+{
+  for file in "\${*}"; do
+    if [ -x usr/bin/install-info ]; then
+      usr/bin/install-info --info-dir=usr/share/info usr/share/info/\${file}.info.xz 2> /dev/null
+    fi
+  done
+}
+
+# Install texinfo files
+
+install_info inetutils
+EOF
+
+# Sources
+
+SRCNAME[0]=libnl
+SRCVERS[0]=3.2.19
+SRCPACK[0]=http://www.infradead.org/~tgr/libnl/files/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz
+SRCCOPY[0]="LGPL21"
+
+build0()
+{
+sed -i 's|pkglibdir = $(libdir)/@PACKAGE@|pkglibdir = $(libdir)/plugins/@PACKAGE@|g' \
+ Makefile.in */Makefile.in */*/Makefile.in */*/*/Makefile.in
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[share]}/net" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --with-pkgconfigdir="${SYS_DIR[share]}/pkgconfig"
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+changelog ChangeLog
+}
+
+SRCNAME[1]=libpcap
+SRCVERS[1]=1.3.0
+SRCPACK[1]=http://www.tcpdump.org/release/${SRCNAME[1]}-${SRCVERS[1]}.tar.gz
+SRCCOPY[1]="BSD3"
+
+build1()
+{
+CPPFLAGS="-I${PKG}${SYS_DIR[include]}/libnl3" \
+LDFLAGS="-L${PKG}${SYS_DIR[lib]}" \
+CFLAGS="${FLAGS} ${CPPFLAGS}" CXXFLAGS="${FLAGS} ${CPPFLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --enable-ipv6 \
+ --enable-bluetooth
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc CREDITS
+changelog CHANGES
+(
+  cd ${PKG}${SYS_DIR[man]}/man3
+  for manpage in *.3pcap; do
+    mv ${manpage} $(basename ${manpage} .3pcap).3
+  done
+)
+rm -f ${PKG}${SYS_DIR[lib]}/*.a
+}
+
+SRCNAME[2]=tcp_wrappers
+SRCVERS[2]=7.6
+SRCPACK[2]=http://ftp.nluug.nl/security/tcpwrappers/${SRCNAME[2]}_${SRCVERS[2]}.tar.gz
+SRCROOT[2]=${SRCNAME[2]}_${SRCVERS[2]}
+
+build2()
+{
+make OPTS="${FLAGS}" REAL_DAEMON_DIR="${SYS_DIR[sbin]}" linux
+make install DESTDIR="${PKG}" MANDIR="${SYS_DIR[man]}" LIBDIR="${SYS_DIR[lib]}"
+doc README
+changelog CHANGES
+rm -f ${PKG}${SYS_DIR[lib]}/libwrap.a
+}
+
+SRCNAME[3]=host
+SRCVERS[3]=20070128
+SRCPACK[3]=ftp://ftp.weird.com/pub/local/${SRCNAME[3]}-${SRCVERS[3]}.tar.gz
+
+build3()
+{
+make ${JOBS} COPTIM="${FLAGS}" CONFDIR="${SYS_DIR[etc]}" \
+ PREFIX="${SYS_DIR[usr]}" MANDIR="${SYS_DIR[man]}/man1"
+make install DESTDIR="${PKG}" CONFDIR="${SYS_DIR[etc]}" \
+ PREFIX="${SYS_DIR[usr]}" MANDIR="${SYS_DIR[man]}/man1"
+for file in mxlookup nscheck nslookup rblookup; do
+  echo ".so man1/host.1" > ${PKG}${SYS_DIR[man]}/man1/${file}.1
+done
+}
+
+SRCNAME[4]=traceroute
+SRCVERS[4]=2.0.19
+SRCPACK[4]=${URL[sf]}/${SRCNAME[4]}/${SRCNAME[4]}/${SRCNAME[4]}-${SRCVERS[4]}/${SRCNAME[4]}-${SRCVERS[4]}.tar.gz
+SRCCOPY[4]="LGPL21 GPL2"
+
+build4()
+{
+make ${JOBS} CFLAGS+="${FLAGS}"
+make install DESTDIR="${PKG}" \
+ prefix="${SYS_DIR[usr]}" \
+ mandir="${SYS_DIR[man]}"
+doc CREDITS
+changelog ChangeLog
+(
+  cd ${PKG}${SYS_DIR[bin]}
+  ln -sf traceroute traceroute6
+  cd ${PKG}${SYS_DIR[man]}/man1
+  echo ".so man1/traceroute.1" > traceroute6.1
+)
+}
+
+SRCNAME[5]=whois
+SRCVERS[5]=5.0.20
+SRCPACK[5]=http://ftp.debian.org/debian/pool/main/w/${SRCNAME[5]}/${SRCNAME[5]}_${SRCVERS[5]}.tar.xz
+SRCCOPY[5]="GPL2"
+
+build5()
+{
+make ${JOBS} CFLAGS="${FLAGS} -I${SYS_DIR[include]}/idn" HAVE_LIBIDN=y
+make install mandir="${SYS_DIR[man]}" BASEDIR="${PKG}"
+}
+
+SRCNAME[6]=inetutils
+SRCVERS[6]=1.9.1
+SRCPACK[6]=${URL[gnu]}/${SRCNAME[6]}/${SRCNAME[6]}-${SRCVERS[6]}.tar.gz
+SRCCOPY[6]="GPL3"
+
+build6()
+{
+#FIXME: PAM: might need to be enabled
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --disable-rpath \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --infodir="${SYS_DIR[info]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --disable-servers \
+ --disable-hostname \
+ --disable-logger \
+ --disable-ifconfig \
+ --disable-talk \
+ --disable-traceroute \
+ --disable-whois
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+doc AUTHORS THANKS
+changelog NEWS
+chmod 0755 ${PKG}${SYS_DIR[bin]}/{ping,ping6,rcp,rsh,rlogin}
+rmdir ${PKG}/usr/libexec
+}
+
+SRCNAME[7]=iputils
+SRCVERS[7]=s20121221
+SRCPACK[7]=http://www.skbuff.net/${SRCNAME[7]}/${SRCNAME[7]}-${SRCVERS[7]}.tar.bz2
+SRCCOPY[7]="BSD4"
+
+build7()
+{
+make ${JOBS} \
+ CCOPTOPT="${FLAGS}" \
+ VPATH="${SYS_DIR[lib]}"
+make install \
+ SBINDIR="${SYS_DIR[sbin]}" \
+ DESTDIR="${PKG}"
+changelog RELNOTES
+# These utilities are provided by other packages but leave this just in case
+#chmod 4711 \
+# ${PKG}/bin/ping \
+# ${PKG}/bin/ping6 \
+# ${PKG}/usr/bin/traceroute6
+}
+
+SRCNAME[8]=net-tools
+SRCVERS[8]=20130121
+SRCPACK[8]=http://www.tazenda.demon.co.uk/phil/${SRCNAME[8]}/${SRCNAME[8]}-${SRCVERS[8]}.tar.xz
+SRCCOPY[8]="GPL2"
+
+build8()
+{
+make version.h
+make ${JOBS} CFLAGS="${FLAGS}"
+make install-slattach install-plipconfig installdata \
+ DESTDIR="${PKG}" \
+ MANDIR="${SYS_DIR[man]}" \
+ BINDIR="${SYS_DIR[bin]}" \
+ SBINDIR="${SYS_DIR[sbin]}"
+rm -rf ${PKG}${SYS_DIR[man]}/pt_BR
+}
+
+SRCNAME[9]=iproute2
+SRCVERS[9]=3.7.0
+SRCPACK[9]=http://devresources.linuxfoundation.org/dev/${SRCNAME[9]}/download/${SRCNAME[9]}-${SRCVERS[9]}.tar.xz
+SRCCOPY[9]="GPL2"
+
+build9()
+{
+./configure
+make ${JOBS} \
+ CCOPTS="${FLAGS}" \
+ CONFDIR="${SYS_DIR[share]}/net" \
+ DATADIR="${SYS_DIR[share]}/net" \
+ LIBDIR="${SYS_DIR[lib]}/plugins"
+make install \
+ DESTDIR="${PKG}" \
+ CONFDIR="${SYS_DIR[share]}/net" \
+ DATADIR="${SYS_DIR[share]}/net" \
+ SBINDIR="${SYS_DIR[sbin]}" \
+ LIBDIR="${SYS_DIR[lib]}/plugins" \
+ MANDIR="${SYS_DIR[man]}" \
+ DOCDIR="${SYS_DIR[doc]}/${SRCNAME[9]}-${SRCVERS[9]}/extra"
+rm -rf \
+ ${PKG}${SYS_DIR[doc]}/${SRCNAME[9]}-${SRCVERS[9]}/extra
+}
diff --git a/base/tcpip/whois-5.0.20-mandir.patch.xz b/base/tcpip/whois-5.0.20-mandir.patch.xz
new file mode 100644
index 0000000..c4b064e
--- /dev/null
+++ b/base/tcpip/whois-5.0.20-mandir.patch.xz
diff --git a/base/tcpip/whois-5.0.20-nomkpasswd.patch.xz b/base/tcpip/whois-5.0.20-nomkpasswd.patch.xz
new file mode 100644
index 0000000..2dd3888
--- /dev/null
+++ b/base/tcpip/whois-5.0.20-nomkpasswd.patch.xz
diff --git a/base/udev/udev-173-deadlockedworker.patch.xz b/base/udev/udev-173-deadlockedworker.patch.xz
new file mode 100644
index 0000000..7bcb492
--- /dev/null
+++ b/base/udev/udev-173-deadlockedworker.patch.xz
diff --git a/base/udev/udev-173-input_id.patch.xz b/base/udev/udev-173-input_id.patch.xz
new file mode 100644
index 0000000..20c45ab
--- /dev/null
+++ b/base/udev/udev-173-input_id.patch.xz
diff --git a/base/udev/udev-173-libdirhack.patch.xz b/base/udev/udev-173-libdirhack.patch.xz
new file mode 100644
index 0000000..8a261b6
--- /dev/null
+++ b/base/udev/udev-173-libdirhack.patch.xz
diff --git a/base/udev/udev-173-rulegenerator.patch.xz b/base/udev/udev-173-rulegenerator.patch.xz
new file mode 100644
index 0000000..1adc455
--- /dev/null
+++ b/base/udev/udev-173-rulegenerator.patch.xz
diff --git a/base/udev/udev-173-slackware.patch.xz b/base/udev/udev-173-slackware.patch.xz
new file mode 100644
index 0000000..19aa89e
--- /dev/null
+++ b/base/udev/udev-173-slackware.patch.xz
diff --git a/base/udev/udev.build b/base/udev/udev.build
new file mode 100755
index 0000000..35d669b
--- /dev/null
+++ b/base/udev/udev.build
@@ -0,0 +1,103 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=udev
+VERSION=173
+BUILD=2
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: udev (dynamic device directory system)
+${NAME}:
+${NAME}: udev provides a dynamic device directory containing only the files
+${NAME}: for the devices which are actually present. It creates or removes
+${NAME}: device node files usually located in the /dev directory.
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://www.kernel.org/pub/linux/utils/kernel/hotplug/${SRCNAME[0]}-${SRCVERS[0]}.tar.bz2
+SRCCOPY[0]="GPL2"
+
+build0()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --enable-shared=yes \
+ --enable-static=yes \
+ --disable-introspection \
+ --prefix=/usr \
+ --mandir="${SYS_DIR[man]}" \
+ --docdir="${SYS_DIR[doc]}/${SRCNAME[0],,}-${SRCVERS[0]}" \
+ --sysconfdir=/etc \
+ --libdir=/usr/lib$(libdirsuffix) \
+ --libexecdir=/usr/lib$(libdirsuffix)/udev \
+ --localstatedir=/var \
+ --sbindir=/usr/sbin \
+ --with-html-dir="${SYS_DIR[html]}" \
+ --with-rootlibdir=/usr/lib$(libdirsuffix) \
+ --with-firmware-path="/usr/lib/firmware:/usr/local/lib/firmware:/lib/firmware" \
+ --with-systemdsystemunitdir="${SYS_DIR[systemdsystemunitdir]}" \
+ --with-pci-ids-path=/usr/share/hwdata \
+ --with-usb-ids-path=/usr/share/hwdata \
+ --enable-udev_acl
+#FIXME: floppy stuff goes in separate a floppy package and also old HD stuff
+#FIXME: remove udev_acl when switching to systemd
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+changelog ChangeLog
+install.dir ${PKG}/etc/{rc.d,modprobe.d,udev/rules.d}
+install.dat doinst.sh ${PKG}/install
+install.dat config/udev.conf ${PKG}/etc/udev
+install.dat config/rules.d/* ${PKG}/usr/lib$(libdirsuffix)/udev/rules.d
+install.dat config/modprobe.d/* ${PKG}/etc/modprobe.d
+install.bin config/rc.d/rc.udev.new ${PKG}/etc/rc.d
+mv \
+ ${PKG}/usr/share/pkgconfig/* \
+ ${PKG}/usr/lib$(libdirsuffix)/pkgconfig
+mv \
+ ${PKG}/usr/lib/ConsoleKit \
+ ${PKG}/usr/lib$(libdirsuffix)
+rm -rf \
+ ${PKG}/usr/lib \
+ ${PKG}/usr/share/pkgconfig
+#FIXME: compatibility symlinks
+install.dir ${PKG}/sbin
+(
+  cd ${PKG}/sbin
+  ln -sf /usr/sbin/udevd
+  ln -sf /usr/sbin/udevadm
+  ln -sf /usr/lib$(libdirsuffix)/udev/scsi_id
+)
+(
+  cd ${PKG}/usr/sbin
+  ln -sf /usr/lib$(libdirsuffix)/udev/scsi_id
+)
+(
+  cd ${PKG}/usr/lib$(libdirsuffix)
+  src.unpack ${CWD}/udev-fixed-devices.tar.xz
+)
+}
diff --git a/base/usb/libusb-compat-0.1.4-pkgconfig.patch.xz b/base/usb/libusb-compat-0.1.4-pkgconfig.patch.xz
new file mode 100644
index 0000000..d37d63f
--- /dev/null
+++ b/base/usb/libusb-compat-0.1.4-pkgconfig.patch.xz
diff --git a/base/usb/usb.build b/base/usb/usb.build
new file mode 100755
index 0000000..0fb853c
--- /dev/null
+++ b/base/usb/usb.build
@@ -0,0 +1,135 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=usb
+MAJOR=1.0
+VERSION=${MAJOR}.15
+BUILD=2
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: usb
+${NAME}:
+${NAME}: Library and utilities required to use USB devices. This package
+${NAME}: provides the following components:
+${NAME}:
+${NAME}:   * libusb - allows userspace applications access to USB devices
+${NAME}:   * usbutils - various utilities such as lsusb
+${NAME}:   * usb.ids - database of USB ids
+${NAME}:
+${NAME}:
+${NAME}: Homepage: http://www.linux-usb.org
+EOF
+
+# Sources
+
+SRCNAME[0]=libusbx
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=${URL[sf]}/${SRCNAME[0]}/${SRCNAME[0]}-${MAJOR}/${SRCNAME[0]}-${SRCVERS[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.bz2
+SRCCOPY[0]="LGPL21"
+
+build0()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.in
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}"
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+doc AUTHORS THANKS
+changelog ChangeLog
+}
+
+SRCNAME[1]=libusb-compat
+SRCVERS[1]=0.1.4
+SRCPACK[1]=${URL[sf]}/libusb/${SRCNAME[1]}-0.1/${SRCNAME[1]}-${SRCVERS[1]}/${SRCNAME[1]}-${SRCVERS[1]}.tar.bz2
+SRCCOPY[1]="LGPL21"
+
+build1()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.in
+LIBUSB_1_0_CFLAGS="-I${PKG}${SYS_DIR[include]}/libusb-1.0" \
+LIBUSB_1_0_LIBS="-L${PKG}${SYS_DIR[lib]}" \
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --enable-static=yes \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}"
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog NEWS
+}
+
+SRCNAME[2]=usbutils
+SRCVERS[2]=006
+SRCPACK[2]=http://www.kernel.org/pub/linux/utils/usb/usbutils/${SRCNAME[2]}-${SRCVERS[2]}.tar.xz
+SRCCOPY[2]="GPL2"
+
+build2()
+{
+LIBUSB_CFLAGS="-I${PKG}${SYS_DIR[include]}" \
+LIBUSB_LIBS="-L${PKG}${SYS_DIR[lib]} -lusb-1.0" \
+CFLAGS="${FLAGS} -I${PKG}${SYS_DIR[include]} -I${PKG}${SYS_DIR[include]}/libusb-1.0" \
+CXXFLAGS="${FLAGS} -I${PKG}${SYS_DIR[include]} -I${PKG}${SYS_DIR[include]}/libusb-1.0" \
+LDFLAGS="-L${PKG}/lib$(libdirsuffix)" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-silent-rules \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --datadir="${SYS_DIR[share]}/hwdata" \
+ --disable-usbids
+make ${JOBS} V=1
+make install DESTDIR="${PKG}"
+doc AUTHORS
+changelog NEWS
+sed "s|@usbids@|${SYS_DIR[share]}/hwdata/usb.ids|g" update-usbids.sh.in > ${PKG}${SYS_DIR[sbin]}/update-usbids
+chmod 0755 ${PKG}${SYS_DIR[sbin]}/update-usbids
+rm -rf \
+ ${PKG}${SYS_DIR[bin]}/lsusb.py
+}
+
+SRCNAME[3]=usbids
+SRCVERS[3]=$(date "+%Y%m%d")
+SRCPACK[3]=http://linux-usb.sourceforge.net/usb.ids
+SRCOPTS[3]="nosrcroot nounpack"
+
+build3()
+{
+install.dir ${PKG}${SYS_DIR[share]}/hwdata
+rm -f ${PKG}${SYS_DIR[share]}/hwdata/usb.ids
+install.dat ${CWD}/usb.ids ${PKG}${SYS_DIR[share]}/hwdata
+}
diff --git a/base/vi/vi.build b/base/vi/vi.build
new file mode 100755
index 0000000..876ae32
--- /dev/null
+++ b/base/vi/vi.build
@@ -0,0 +1,90 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=vi
+MAJOR=7.3
+VERSION=${MAJOR}.773
+BUILD=2
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: vi (a minimal version of Vi IMproved)
+${NAME}:
+${NAME}: A minimal version of 'vim' compatible with 'vi'.
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=vim
+SRCVERS[0]=${MAJOR}
+SRCPACK[0]=http://ftp.vim.org/pub/vim/unix/${SRCNAME[0]}-${SRCVERS[0]}.tar.bz2
+SRCROOT[0]=${SRCNAME[0]}73
+
+configure()
+{
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}/lib/vim" \
+ --localedir="${SYS_DIR[share]}/locale" \
+ --with-compiledby="${DISTRONAME}" \
+ --with-features=tiny \
+ ${*}
+}
+
+build0()
+{
+configure \
+ --disable-netbeans \
+ --disable-pythoninterp \
+ --disable-python3interp \
+ --disable-rubyinterp \
+ --disable-tclinterp \
+ --disable-luainterp \
+ --disable-perlinterp \
+ --disable-gui \
+ --disable-gpm \
+ --disable-acl \
+ --disable-cscope \
+ --enable-multibyte \
+ --enable-nls
+ --with-x=no \
+ --with-vim-name="vi"
+make ${JOBS} VIMRCLOC="${SYS_DIR[etc]}" VIMRTLOC="${SYS_DIR[share]}/vim" VIMRUNTIMEDIR="${SYS_DIR[share]}/vim"
+make install VIMRCLOC="${SYS_DIR[etc]}" VIMRTLOC="${SYS_DIR[share]}/vim" DESTDIR="${PKG}"
+rm -rf \
+  ${PKG}${SYS_DIR[share]} \
+  ${PKG}${SYS_DIR[bin]}/{vimtutor,xxd,rview,rvim,view,ex}
+mv \
+  ${PKG}${SYS_DIR[bin]}/vim \
+  ${PKG}${SYS_DIR[bin]}/vi
+license runtime/doc/uganda.txt
+install.dir ${PKG}${SYS_DIR[man]}/man1
+echo ".so man1/vim.1" > ${PKG}${SYS_DIR[man]}/man1/vi.1
+install.dir ${PKG}${SYS_DIR[share]}/vim/doc
+install.dat vi_help.txt ${PKG}${SYS_DIR[share]}/vim/doc
+}
diff --git a/base/vi/vim-7.3-crontab.patch.xz b/base/vi/vim-7.3-crontab.patch.xz
new file mode 100644
index 0000000..b579b03
--- /dev/null
+++ b/base/vi/vim-7.3-crontab.patch.xz
diff --git a/base/vi/vim-7.3-logfiles.patch.xz b/base/vi/vim-7.3-logfiles.patch.xz
new file mode 100644
index 0000000..bed59fe
--- /dev/null
+++ b/base/vi/vim-7.3-logfiles.patch.xz
diff --git a/base/vi/vim-7.3-minimal.patch.xz b/base/vi/vim-7.3-minimal.patch.xz
new file mode 100644
index 0000000..6ddcb2d
--- /dev/null
+++ b/base/vi/vim-7.3-minimal.patch.xz
diff --git a/base/vi/vim-7.3-nlpo.patch.xz b/base/vi/vim-7.3-nlpo.patch.xz
new file mode 100644
index 0000000..033cf43
--- /dev/null
+++ b/base/vi/vim-7.3-nlpo.patch.xz
diff --git a/base/vi/vim-7.3-slackware.patch.xz b/base/vi/vim-7.3-slackware.patch.xz
new file mode 100644
index 0000000..7e974bf
--- /dev/null
+++ b/base/vi/vim-7.3-slackware.patch.xz
diff --git a/base/vi/vim-7.3-syntax20130121.patch.xz b/base/vi/vim-7.3-syntax20130121.patch.xz
new file mode 100644
index 0000000..6821b0b
--- /dev/null
+++ b/base/vi/vim-7.3-syntax20130121.patch.xz
diff --git a/base/vi/vim-7.3-update773.patch.xz b/base/vi/vim-7.3-update773.patch.xz
new file mode 100644
index 0000000..ed5b1cd
--- /dev/null
+++ b/base/vi/vim-7.3-update773.patch.xz
diff --git a/base/vi/vim-7.3-useproperlocaledir.patch.xz b/base/vi/vim-7.3-useproperlocaledir.patch.xz
new file mode 100644
index 0000000..1c24406
--- /dev/null
+++ b/base/vi/vim-7.3-useproperlocaledir.patch.xz
diff --git a/base/vi/vim-7.3-vimautoconf.patch.xz b/base/vi/vim-7.3-vimautoconf.patch.xz
new file mode 100644
index 0000000..e2d9177
--- /dev/null
+++ b/base/vi/vim-7.3-vimautoconf.patch.xz
diff --git a/base/wireless/crda-1.1.3-optflags.patch.xz b/base/wireless/crda-1.1.3-optflags.patch.xz
new file mode 100644
index 0000000..35da8f2
--- /dev/null
+++ b/base/wireless/crda-1.1.3-optflags.patch.xz
diff --git a/base/wireless/crda-1.1.3-paths.patch.xz b/base/wireless/crda-1.1.3-paths.patch.xz
new file mode 100644
index 0000000..9cd2e93
--- /dev/null
+++ b/base/wireless/crda-1.1.3-paths.patch.xz
diff --git a/base/wireless/crda-1.1.3-regbin.patch.xz b/base/wireless/crda-1.1.3-regbin.patch.xz
new file mode 100644
index 0000000..32c717d
--- /dev/null
+++ b/base/wireless/crda-1.1.3-regbin.patch.xz
diff --git a/base/wireless/iw-3.8-optflags.patch.xz b/base/wireless/iw-3.8-optflags.patch.xz
new file mode 100644
index 0000000..1e949e0
--- /dev/null
+++ b/base/wireless/iw-3.8-optflags.patch.xz
diff --git a/base/wireless/wireless.build b/base/wireless/wireless.build
new file mode 100755
index 0000000..b3373a7
--- /dev/null
+++ b/base/wireless/wireless.build
@@ -0,0 +1,135 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=wireless
+VERSION=$(date '+%Y%m%d')
+BUILD=1
+DEPENDS=('tcpip >= 20130209-1' 'gnutls >= 3.1.10-1' 'dbus >= 1.4.24-1')
+#FIXME: enable EAP_FAST
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: wireless
+${NAME}:
+${NAME}: This package includes the central regulatory domain agent (crda),
+${NAME}: the 'iw' command line tool and the 'wpa_supplicant' daemon. It must
+${NAME}: be installed in order for wireless networking (such as WiFi) to work.
+${NAME}:
+${NAME}: Homepage: http://linuxwireless.org
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/conf.d/wpa_supplicant.conf.new
+config etc/logrotate.d/wpa_supplicant.new
+EOF
+
+REGBINLOCATION="${SYS_DIR[share]}/net"
+
+# Sources
+
+SRCNAME[0]=wireless-regdb
+SRCVERS[0]=2013.02.13
+SRCPACK[0]=http://linuxwireless.org/download/${SRCNAME[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+SRCCOPY[0]="MIT"
+
+build0()
+{
+install.dir ${PKG}${REGBINLOCATION}
+install.dat regulatory.bin ${PKG}${REGBINLOCATION}
+install.dir ${PKG}${SYS_DIR[man]}/man5
+install.man regulatory.bin.5 ${PKG}${SYS_DIR[man]}/man5
+}
+
+SRCNAME[1]=crda
+SRCVERS[1]=1.1.3
+SRCPACK[1]=http://linuxwireless.org/download/${SRCNAME[1]}/${SRCNAME[1]}-${SRCVERS[1]}.tar.bz2
+SRCCOPY[1]="MIT"
+
+build1()
+{
+make ${JOBS} \
+ OPTFLAGS="${FLAGS} -I${SYS_DIR[include]}/gcrypt -I${SYS_DIR[include]}/gpg-error" \
+ REG_BIN="${PKG}${REGBINLOCATION}/regulatory.bin" \
+ UDEV_RULE_DIR="${SYS_DIR[udevrules]}"
+make install DESTDIR="${PKG}" \
+ SBINDIR="${SYS_DIR[sbin]}" \
+ UDEV_RULE_DIR="${SYS_DIR[udevrules]}"
+#FIXME: packages should never compress manual pages!
+gunzip ${PKG}${SYS_DIR[man]}/man?/*.?.gz
+#FIXME: compat
+install.dir ${PKG}/sbin
+(
+  cd ${PKG}/sbin
+  ln -sf ${SYS_DIR[sbin]}/crda
+  ln -sf ${SYS_DIR[sbin]}/regdbdump
+)
+}
+
+SRCNAME[2]=iw
+SRCVERS[2]=3.8
+SRCPACK[2]=http://linuxwireless.org/download/${SRCNAME[2]}/${SRCNAME[2]}-${SRCVERS[2]}.tar.bz2
+SRCCOPY[2]="MIT"
+
+build2()
+{
+make OPTFLAGS="${FLAGS}" V="1"
+make install DESTDIR="${PKG}" MANDIR="${SYS_DIR[man]}" BINDIR="${SYS_DIR[sbin]}"
+#FIXME: packages should never compress manual pages!
+gunzip ${PKG}${SYS_DIR[man]}/man?/*.?.gz
+}
+
+SRCNAME[3]=wpa_supplicant
+SRCVERS[3]=2.0
+SRCPACK[3]=http://hostap.epitest.fi/releases/${SRCNAME[3]}-${SRCVERS[3]}.tar.gz
+SRCCOPY[3]="BSD3"
+
+build3()
+{
+( cd wpa_supplicant ; make OPTS="${FLAGS}" )
+(
+cd wpa_supplicant
+make install \
+ DESTDIR="${PKG}" \
+ CONFDIR="${SYS_DIR[conf]}" \
+ MANDIR="${SYS_DIR[man]}" \
+ DOCDIR="${SYS_DIR[doc]}/${SRCNAME[3]}-${SRCVERS[3]}"
+)
+mv \
+ ${PKG}${SYS_DIR[conf]}/wpa_supplicant.conf \
+ ${PKG}${SYS_DIR[conf]}/wpa_supplicant.conf.sample
+install -m 0600 wpa_supplicant.conf.new ${PKG}${SYS_DIR[conf]}
+install.dir ${PKG}${SYS_DIR[etc]}/{logrotate,tmpfiles}.d
+install.cfg wpa_supplicant.logrotate ${PKG}${SYS_DIR[etc]}/logrotate.d/wpa_supplicant.new
+install.cfg wpa_supplicant.conf.tmpfiles ${PKG}${SYS_DIR[etc]}/tmpfiles.d/wpa_supplicant.conf
+}
diff --git a/base/wireless/wpa_supplicant-2.0-config.patch.xz b/base/wireless/wpa_supplicant-2.0-config.patch.xz
new file mode 100644
index 0000000..40b5744
--- /dev/null
+++ b/base/wireless/wpa_supplicant-2.0-config.patch.xz
diff --git a/base/wireless/wpa_supplicant-2.0-dbusservicefileargs.patch.xz b/base/wireless/wpa_supplicant-2.0-dbusservicefileargs.patch.xz
new file mode 100644
index 0000000..558de4a
--- /dev/null
+++ b/base/wireless/wpa_supplicant-2.0-dbusservicefileargs.patch.xz
diff --git a/base/wireless/wpa_supplicant-2.0-etc.patch.xz b/base/wireless/wpa_supplicant-2.0-etc.patch.xz
new file mode 100644
index 0000000..6a03cdc
--- /dev/null
+++ b/base/wireless/wpa_supplicant-2.0-etc.patch.xz
diff --git a/base/wireless/wpa_supplicant-2.0-install.patch.xz b/base/wireless/wpa_supplicant-2.0-install.patch.xz
new file mode 100644
index 0000000..91159c5
--- /dev/null
+++ b/base/wireless/wpa_supplicant-2.0-install.patch.xz
diff --git a/base/wireless/wpa_supplicant-2.0-libnl3includes.patch.xz b/base/wireless/wpa_supplicant-2.0-libnl3includes.patch.xz
new file mode 100644
index 0000000..861369f
--- /dev/null
+++ b/base/wireless/wpa_supplicant-2.0-libnl3includes.patch.xz
diff --git a/base/wireless/wpa_supplicant-2.0-logrotate.patch.xz b/base/wireless/wpa_supplicant-2.0-logrotate.patch.xz
new file mode 100644
index 0000000..62e5095
--- /dev/null
+++ b/base/wireless/wpa_supplicant-2.0-logrotate.patch.xz
diff --git a/base/wireless/wpa_supplicant-2.0-optflags.patch.xz b/base/wireless/wpa_supplicant-2.0-optflags.patch.xz
new file mode 100644
index 0000000..88ae7bf
--- /dev/null
+++ b/base/wireless/wpa_supplicant-2.0-optflags.patch.xz
diff --git a/base/wireless/wpa_supplicant-2.0-quietscanresults.patch.xz b/base/wireless/wpa_supplicant-2.0-quietscanresults.patch.xz
new file mode 100644
index 0000000..a736335
--- /dev/null
+++ b/base/wireless/wpa_supplicant-2.0-quietscanresults.patch.xz
diff --git a/base/wireless/wpa_supplicant-2.0-tmpfilesd.patch.xz b/base/wireless/wpa_supplicant-2.0-tmpfilesd.patch.xz
new file mode 100644
index 0000000..fa73927
--- /dev/null
+++ b/base/wireless/wpa_supplicant-2.0-tmpfilesd.patch.xz
diff --git a/base/xz/xz.build b/base/xz/xz.build
new file mode 100755
index 0000000..be53218
--- /dev/null
+++ b/base/xz/xz.build
@@ -0,0 +1,74 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=xz
+VERSION=5.0.4
+BUILD=2
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: xz (compression utility based on the LZMA algorithm)
+${NAME}:
+${NAME}: LZMA is a general purporse compression algorithm designed by Igor
+${NAME}: Pavlov as part of 7-Zip. It provides high compression ratio while
+${NAME}: keeping the decompression speed fast. XZ Utils are an attempt to make
+${NAME}: LZMA compression easy to use on free (as in freedom) operating
+${NAME}: systems.
+${NAME}:
+${NAME}: The people most responsible for xz are Igor Pavlov, Ville Koskinen,
+${NAME}: and Lasse Collin.  For more info:  http://tukaani.org/xz
+${NAME}:
+EOF
+
+# Sources
+
+SRCNAME[0]=${NAME}
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://tukaani.org/xz/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+SRCCOPY[0]="GPL2 GPL3 LGPL21"
+
+build0()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' src/liblzma/Makefile.in
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-dependency-tracking \
+ --disable-rpath \
+ --enable-static=no \
+ --enable-shared=yes \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}"
+make ${JOBS}
+make install DESTDIR="${PKG}"
+doc AUTHORS THANKS
+changelog NEWS
+# No manual page symlinks
+(
+  cd ${PKG}${SYS_DIR[man]}/man1
+  rm -f {lzmore,lzmadec,lzless,lzma,lzegrep,unlzma,lzdiff}.1
+  echo ".so man1/xzmore.1" > lzmore.1
+  echo ".so man1/xzdec.1" > lzmadec.1
+  echo ".so man1/xzless.1" > lzless.1
+  echo ".so man1/xz.1" > lzma.1
+  echo ".so man1/xzgrep.1" > lzegrep.1
+  echo ".so man1/xz.1" > unlzma.1
+  echo ".so man1/xzdiff.1" > lzdiff.1
+)
+rm -rf ${PKG}${SYS_DIR[doc]}/${SRCNAME[0]}
+}