diff options
Diffstat (limited to 'libs_network')
36 files changed, 1650 insertions, 0 deletions
diff --git a/libs_network/curl/curl-7.36.0-pkgconfigdir.patch.xz b/libs_network/curl/curl-7.36.0-pkgconfigdir.patch.xz Binary files differnew file mode 100644 index 0000000..5141796 --- /dev/null +++ b/libs_network/curl/curl-7.36.0-pkgconfigdir.patch.xz diff --git a/libs_network/curl/curl.build b/libs_network/curl/curl.build new file mode 100755 index 0000000..d97c882 --- /dev/null +++ b/libs_network/curl/curl.build @@ -0,0 +1,73 @@ +#!/bin/bash +# +# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd> + +source /usr/src/ports/Build/build.sh + +NAME=curl +VERSION=7.36.0 +BUILD=1 +DEPENDS=('gnutls >= 3.2.12-1' 'ca_certificates >= 20130119-1') + +# Description + +cat > ${PKG}/install/slack-desc <<EOF +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + +$(padd)|-----handy-ruler------------------------------------------------------| +${NAME}: curl (command line URL data transfer tool) +${NAME}: +${NAME}: Curl is a command line tool for transferring data specified with URL +${NAME}: syntax. The command is designed to work without user interaction or +${NAME}: any kind of interactivity. Curl offers a busload of useful tricks +${NAME}: like proxy support, user authentication, ftp upload, HTTP post, SSL +${NAME}: (https:) connections, cookies, file transfer resume and more. +${NAME}: +${NAME}: libcurl is a library that Curl uses to do its job. It is readily +${NAME}: available to be used by your software, too. +${NAME}: +EOF + +# Sources + +SRCNAME[0]=${NAME} +SRCVERS[0]=${VERSION} +SRCPACK[0]=http://curl.haxx.se/download/${SRCNAME[0]}-${SRCVERS[0]}.tar.lzma +SRCCOPY[0]="MIT" + +build0() +{ +CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \ +./configure \ + --build="${ARCH}-slackware-linux" \ + --disable-dependency-tracking \ + --disable-debug \ + --enable-static=no \ + --enable-shared=yes \ + --prefix="${SYS_DIR[usr]}" \ + --mandir="${SYS_DIR[man]}" \ + --sysconfdir="${SYS_DIR[etc]}" \ + --libdir="${SYS_DIR[lib]}" \ + --localstatedir="${SYS_DIR[var]}" \ + --without-librtmp \ + --without-ssl \ + --with-gnutls="${SYS_DIR[usr]}" \ + --disable-ldap \ + --disable-ldaps \ + --enable-ipv6 \ + --enable-tls-srp \ + --enable-versioned-symbols \ + --enable-threaded-resolver +# --with-ca-path=/usr/share/ca-certificates +make ${JOBS} +make install DESTDIR="${PKG}" +doc docs/THANKS +changelog CHANGES +install.dir ${PKG}${SYS_DIR[share]}/aclocal +install.dat docs/libcurl/libcurl.m4 ${PKG}${SYS_DIR[share]}/aclocal +} diff --git a/libs_network/geoip/geoip.build b/libs_network/geoip/geoip.build new file mode 100755 index 0000000..5e7e71a --- /dev/null +++ b/libs_network/geoip/geoip.build @@ -0,0 +1,84 @@ +#!/bin/bash +# +# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd> + +source /usr/src/ports/Build/build.sh + +NAME=geoip +VERSION=1.4.8 +BUILD=2 + +# Description + +cat > ${PKG}/install/slack-desc <<EOF +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + +$(padd)|-----handy-ruler------------------------------------------------------| +${NAME}: geoip (GeoIP C API) +${NAME}: +${NAME}: A library that maps IP addresses to countries. +${NAME}: +${NAME}: Homepage: http://www.maxmind.com/app/c +${NAME}: +${NAME}: +${NAME}: +${NAME}: +${NAME}: +${NAME}: +EOF + +cat >> ${PKG}/install/doinst.sh <<EOF +#!/bin/sh +config() { + NEW="\$1" + OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)" + # If there's no config file by that name, mv it over: + if [ ! -r \$OLD ]; then + mv \$NEW \$OLD + elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then + # toss the redundant copy + rm \$NEW + fi + # Otherwise, we leave the .new copy for the admin to consider... +} + +config etc/conf.d/GeoIP.conf.new +EOF + +# Sources + +SRCNAME[0]=GeoIP +SRCVERS[0]=${VERSION} +SRCPACK[0]=http://geolite.maxmind.com/download/geoip/api/c/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz +SRCCOPY[0]="LGPL21" + +build0() +{ +CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \ +./configure \ + --build="${ARCH}-slackware-linux" \ + --disable-dependency-tracking \ + --enable-static=no \ + --enable-shared=yes \ + --prefix="${SYS_DIR[usr]}" \ + --mandir="${SYS_DIR[man]}" \ + --sysconfdir="${SYS_DIR[etc]}/conf.d" \ + --libdir="${SYS_DIR[lib]}" \ + --localstatedir="${SYS_DIR[var]}" \ + --datadir="${SYS_DIR[share]}/net" +make ${JOBS} +make install DESTDIR="${PKG}" +doc AUTHORS README +changelog ChangeLog +mv \ + ${PKG}/etc/conf.d/GeoIP.conf.default \ + ${PKG}/etc/conf.d/GeoIP.conf.sample +mv \ + ${PKG}/etc/conf.d/GeoIP.conf \ + ${PKG}/etc/conf.d/GeoIP.conf.new +} diff --git a/libs_network/libesmtp/libesmtp.SlackBuild b/libs_network/libesmtp/libesmtp.SlackBuild new file mode 100755 index 0000000..2488d97 --- /dev/null +++ b/libs_network/libesmtp/libesmtp.SlackBuild @@ -0,0 +1,80 @@ +#!/bin/sh + +CWD=`pwd` +NAME=libesmtp +VERSION=1.0.3r1 +ARCH=i586 +BUILD=1 +PKGNAME=$NAME +PKGVER=$VERSION +BASEDIR=$PKGNAME-$PKGVER +ARCHIVE=$BASEDIR.tar.bz2 +REPOSITORY=http://www.stafford.uklinux.net/libesmtp +FLAGS="-O2 -march=pentium -mcpu=pentium -fno-strength-reduce \ + -fomit-frame-pointer -ffast-math" +PKG=/tmp/package-$NAME + +rm -rf $PKG +mkdir -p $PKG + +# Obtain sources +if [ ! -e $ARCHIVE ]; then + if `wget "$REPOSITORY/$ARCHIVE"`; then + true + else + exit 1 + fi +fi + +# Compile +cd /tmp +tar jxvf $CWD/$ARCHIVE +cd $BASEDIR +CFLAGS=$FLAGS CXXFLAGS=$FLAGS ./configure --prefix=/usr +make + +# Install +make install DESTDIR=$PKG +mkdir -p $PKG/install $PKG/usr/doc/$NAME-$VERSION +cat > $PKG/install/slack-desc <<EOF +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +libesmtp: LibESMTP +libesmtp: +libesmtp: LibESMTP is a library to manage posting (or submission of) electronic +libesmtp: mail using SMTP to a preconfigured Mail Transport Agent (MTA) such as +libesmtp: Exim or Postfix. It may be used as part of a Mail User Agent (MUA) or +libesmtp: another program that must be able to post electronic mail but where +libesmtp: mail functionality is not the program's primary purpose. LibESMTP is +libesmtp: not intended to be used as part of a program that implements a Mail +libesmtp: Transport Agent. +libesmtp: +libesmtp: +EOF + +cat > $PKG/install/slack-required <<EOF +openssl-solibs >= 0.9.7d-i486-1 +EOF + +install -m644 -g0 -o0 AUTHORS ChangeLog NEWS Notes README TODO \ + $PKG/usr/doc/$NAME-$VERSION + +gzip -9nf $PKG/usr/doc/$NAME-$VERSION/ChangeLog + +rm -f $PKG/usr/lib/esmtp-plugins/*.a +rm -f $PKG/usr/lib/esmtp-plugins/*.la +strip --strip-unneeded $PKG/usr/lib/esmtp-plugins/*.so + +chown -R root.root $PKG +chown root.bin $PKG/usr/bin $PKG/usr/bin/* + +# Make package +cd $PKG +cat install/slack-desc | grep "$NAME:" > /tmp/$NAME-$VERSION-$ARCH-$BUILD.txt +makepkg -l y -c n /tmp/$NAME-$VERSION-$ARCH-$BUILD.tgz diff --git a/libs_network/libevent/libevent-2.0.21-stable-pkgconfigdir.patch.xz b/libs_network/libevent/libevent-2.0.21-stable-pkgconfigdir.patch.xz Binary files differnew file mode 100644 index 0000000..f08640a --- /dev/null +++ b/libs_network/libevent/libevent-2.0.21-stable-pkgconfigdir.patch.xz diff --git a/libs_network/libevent/libevent.build b/libs_network/libevent/libevent.build new file mode 100755 index 0000000..2e29eee --- /dev/null +++ b/libs_network/libevent/libevent.build @@ -0,0 +1,61 @@ +#!/bin/bash +# +# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd> + +source /usr/src/ports/Build/build.sh + +NAME=libevent +VERSION=2.0.21 +BUILD=1 +OPTDEPENDS=('openssl >= 1.0.1c-1') + +# Description + +cat > ${PKG}/install/slack-desc <<EOF +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + +$(padd)|-----handy-ruler------------------------------------------------------| +${NAME}: libevent (event notification library) +${NAME}: +${NAME}: A library that provides an event loop for event driven network +${NAME}: servers. +${NAME}: +${NAME}: Homepage: http://www.monkey.org/~provos/libevent +${NAME}: +${NAME}: +${NAME}: +${NAME}: +${NAME}: +EOF + +# Sources + +SRCNAME[0]=${NAME} +SRCVERS[0]=${VERSION}-stable +SRCPACK[0]=http://www.monkey.org/~provos/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz +SRCCOPY[0]="BSD3" + +build0() +{ +CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \ +./configure \ + --build="${ARCH}-slackware-linux" \ + --disable-dependency-tracking \ + --enable-shared=yes \ + --enable-static=no \ + --prefix="${SYS_DIR[usr]}" \ + --mandir="${SYS_DIR[man]}" \ + --sysconfdir="${SYS_DIR[etc]}" \ + --libdir="${SYS_DIR[lib]}" \ + --includedir="${SYS_DIR[include]}/event" \ + --localstatedir="${SYS_DIR[var]}" +make ${JOBS} +make install DESTDIR="${PKG}" +doc README +changelog ChangeLog +} diff --git a/libs_network/libgmime/libgmime.build b/libs_network/libgmime/libgmime.build new file mode 100755 index 0000000..bb4e193 --- /dev/null +++ b/libs_network/libgmime/libgmime.build @@ -0,0 +1,67 @@ +#!/bin/bash +# +# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd> + +source /usr/src/ports/Build/build.sh + +NAME=libgmime +MAJOR=2.6 +VERSION=${MAJOR}.15 +BUILD=1 +DEPENDS=('glib >= 2.36.0-1' 'gpgme >= 1.3.2-1') + +# Description + +cat > ${PKG}/install/slack-desc <<EOF +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + +$(padd)|-----handy-ruler------------------------------------------------------| +${NAME}: gmime (MIME library) +${NAME}: +${NAME}: GMime is a C/C++ library for parsing and creating messages using the +${NAME}: Multipurpose Internet Mail Extension (MIME). +${NAME}: +${NAME}: Homepage: http://spruce.sf.net/gmime +${NAME}: +${NAME}: +${NAME}: +${NAME}: +${NAME}: +EOF + +# Sources + +SRCNAME[0]=gmime +SRCVERS[0]=${VERSION} +SRCPACK[0]=${URL[gnome]}/gmime/${MAJOR}/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz +SRCCOPY[0]="LGPL21" + +build0() +{ +sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.{am,in} +CPPFLAGS="-I${SYS_DIR[include]}/gpg-error" \ +CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \ +./configure \ + --build="${ARCH}-slackware-linux" \ + --disable-dependency-tracking \ + --disable-rpath \ + --enable-static=no \ + --enable-shared=yes \ + --prefix="${SYS_DIR[usr]}" \ + --mandir="${SYS_DIR[man]}" \ + --sysconfdir="${SYS_DIR[etc]}" \ + --libdir="${SYS_DIR[lib]}" \ + --localstatedir="${SYS_DIR[var]}" \ + --with-html-dir="${SYS_DIR[html]}" \ + --enable-smime +make ${JOBS} +make install DESTDIR="${PKG}" +doc AUTHORS +changelog ChangeLog +rm -rf ${PKG}${SYS_DIR[share]}/gtk-doc +} diff --git a/libs_network/libgsasl/libgsasl-1.8.0-pkgconfigdir.patch.xz b/libs_network/libgsasl/libgsasl-1.8.0-pkgconfigdir.patch.xz Binary files differnew file mode 100644 index 0000000..4fadf36 --- /dev/null +++ b/libs_network/libgsasl/libgsasl-1.8.0-pkgconfigdir.patch.xz diff --git a/libs_network/libgsasl/libgsasl.build b/libs_network/libgsasl/libgsasl.build new file mode 100755 index 0000000..d529f33 --- /dev/null +++ b/libs_network/libgsasl/libgsasl.build @@ -0,0 +1,64 @@ +#!/bin/bash +# +# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd> + +source /usr/src/ports/Build/build.sh + +NAME=libgsasl +VERSION=1.8.0 +BUILD=2 +DEPENDS=('libgcrypt >= 1.5.0-1' 'libntlm >= 1.3-1') + +# Description + +cat > ${PKG}/install/slack-desc <<EOF +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + +$(padd)|-----handy-ruler------------------------------------------------------| +${NAME}: libgsasl +${NAME}: +${NAME}: GNU SASL is an implementation of the Simple Authentication and +${NAME}: Security Layer framework and a few common SASL mechanisms. SASL is +${NAME}: used is used by network servers (e.g., IMAP, SMTP) to request +${NAME}: authentication from clients, and in clients to authenticate against +${NAME}: servers. +${NAME}: +${NAME}: Homepage: http://josefsson.org/libgsasl +${NAME}: +${NAME}: +EOF + +# Sources + +SRCNAME[0]=${NAME} +SRCVERS[0]=${VERSION} +SRCPACK[0]=ftp://ftp.gnu.org/pub/gnu/gsasl/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz +SRCCOPY[0]="GPL3 LGPL21" + +build0() +{ +CPPFLAGS="-I${SYS_DIR[include]}/idn -I${SYS_DIR[include]}/ntlm -I${SYS_DIR[include]}/gcrypt -I${SYS_DIR[include]}/gpg-error" \ +CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \ +./configure \ + --build="${ARCH}-slackware-linux" \ + --disable-dependency-tracking \ + --disable-rpath \ + --enable-static=no \ + --enable-shared=yes \ + --prefix="${SYS_DIR[usr]}" \ + --mandir="${SYS_DIR[man]}" \ + --sysconfdir="${SYS_DIR[etc]}" \ + --libdir="${SYS_DIR[lib]}" \ + --localstatedir="${SYS_DIR[var]}" \ + --includedir="${SYS_DIR[include]}/gsasl" \ + --with-libgcrypt +make ${JOBS} V=1 +make install DESTDIR="${PKG}" +doc AUTHORS THANKS +changelog NEWS +} diff --git a/libs_network/libgupnp/libgupnp.build b/libs_network/libgupnp/libgupnp.build new file mode 100755 index 0000000..f63cf0e --- /dev/null +++ b/libs_network/libgupnp/libgupnp.build @@ -0,0 +1,117 @@ +#!/bin/bash +# +# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd> + +source /usr/src/ports/Build/build.sh + +NAME=libgupnp +VERSION=0.20.10 +BUILD=1 +DEPENDS=('glib >= 2.38.2-1' 'libsoup >= 2.46.0-1') + +# Description + +cat > ${PKG}/install/slack-desc <<EOF +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + +$(padd)|-----handy-ruler------------------------------------------------------| +${NAME}: libgupnp +${NAME}: +${NAME}: A framework for creating UPnP devices and control points. It is +${NAME}: intended to be easy to use, efficient and flexible while providing +${NAME}: the same set of features as libupnp. +${NAME}: +${NAME}: Homepage: http://gupnp.org +${NAME}: +${NAME}: +${NAME}: +${NAME}: +EOF + +# Sources + +GUPNPREPO=http://gupnp.org/sites/all/files/sources + +GTKINCS="$(pkg-config glib-2.0 --cflags)" +GSSDPINCS="-I${SYS_DIR[include]}/libsoup-2.4 -I${SYS_DIR[include]}/libxml2" + +configure() +{ +sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.{am,in} +CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \ +./configure \ + --build="${ARCH}-slackware-linux" \ + --disable-dependency-tracking \ + --disable-silent-rules \ + --enable-static=no \ + --enable-shared=yes \ + --enable-introspection=no \ + --enable-gtk-doc-html=no \ + --prefix="${SYS_DIR[usr]}" \ + --mandir="${SYS_DIR[man]}" \ + --sysconfdir="${SYS_DIR[etc]}" \ + --libdir="${SYS_DIR[lib]}" \ + --localstatedir="${SYS_DIR[var]}" \ + --with-html-dir="${SYS_DIR[html]}" \ + ${*} +} + +SRCNAME[0]=gssdp +SRCVERS[0]=0.14.7 +SRCPACK[0]=${GUPNPREPO}/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz +SRCCOPY[0]="LGPL2" + +build0() +{ +CPPFLAGS="-I${SYS_DIR[include]}/libsoup-2.4 ${GTKINCS}" \ +configure \ + --datadir=${SYS_DIR[share]}/application-data +make ${JOBS} V=1 +make install DESTDIR="${PKG}" +doc AUTHORS +changelog NEWS +rm -rf ${PKG}${SYS_DIR[html]} +} + +SRCNAME[1]=gupnp +SRCVERS[1]=${VERSION} +SRCPACK[1]=${GUPNPREPO}/${SRCNAME[1]}-${SRCVERS[1]}.tar.xz +SRCCOPY[1]="LGPL2" + +build1() +{ +LIBGUPNP_LIBS="-luuid -L${PKG}${SYS_DIR[lib]} -lgssdp-1.0 -lgobject-2.0 -lgio-2.0" \ +LIBGUPNP_CFLAGS="-I${PKG}${SYS_DIR[include]}/gssdp-1.0 ${GTKINCS} ${GSSDPINCS}" \ +configure \ + --with-context-manager=network-manager +make ${JOBS} V=1 +make install DESTDIR="${PKG}" +doc AUTHORS +changelog NEWS +rm -rf \ + ${PKG}${SYS_DIR[lib]}/*.la \ + ${PKG}${SYS_DIR[html]} +} + +SRCNAME[2]=gupnp-igd +SRCVERS[2]=0.2.3 +SRCPACK[2]=${GUPNPREPO}/${SRCNAME[2]}-${SRCVERS[2]}.tar.xz +SRCCOPY[2]="LGPL21" + +build2() +{ +LIBGUPNP_LIBS="-luuid -L${PKG}${SYS_DIR[lib]} -lgupnp-1.0 -lgssdp-1.0 -lglib-2.0 -lgthread-2.0 -lgobject-2.0 -lgio-2.0" \ +LIBGUPNP_CFLAGS="-I${PKG}${SYS_DIR[include]}/gssdp-1.0 -I${PKG}${SYS_DIR[include]}/gupnp-1.0 ${GTKINCS} ${GSSDPINCS}" \ +configure \ + --disable-python +make ${JOBS} V=1 +make install DESTDIR="${PKG}" +doc AUTHORS +changelog NEWS +rm -rf ${PKG}${SYS_DIR[html]} +} diff --git a/libs_network/libnasl/libnasl.SlackBuild b/libs_network/libnasl/libnasl.SlackBuild new file mode 100755 index 0000000..be4374a --- /dev/null +++ b/libs_network/libnasl/libnasl.SlackBuild @@ -0,0 +1,79 @@ +#!/bin/sh + +CWD=`pwd` +NAME=libnasl +VERSION=2.3.1 +ARCH=i586 +BUILD=1 +PKGNAME=$NAME +PKGVER=$VERSION +BASEDIR=$PKGNAME +ARCHIVE=$PKGNAME-$PKGVER.tar.gz +REPOSITORY=http://no/where +FLAGS="-O2 -march=pentium -mtune=pentium -fno-strength-reduce \ + -fomit-frame-pointer -ffast-math" +PKG=/tmp/package-$NAME + +rm -rf $PKG +mkdir -p $PKG + +# Obtain sources +if [ ! -e $ARCHIVE ]; then + if `wget "$REPOSITORY/$ARCHIVE"`; then + true + else + exit 1 + fi +fi + +# Compile +cd /tmp +tar zxvf $CWD/$ARCHIVE +cd $BASEDIR +CFLAGS=$FLAGS CXXFLAGS=$FLAGS ./configure \ + --enable-static=no \ + --prefix=/usr \ + --mandir=/usr/man \ + --sysconfdir=/etc \ + --localstatedir=/var +make + +# Install +make install DESTDIR=$PKG +mkdir -p $PKG/install +cat > $PKG/install/slack-desc <<EOF +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +libnasl: libnasl +libnasl: +libnasl: NASL is the Nessus Attack Scripting Language. +libnasl: +libnasl: +libnasl: +libnasl: +libnasl: +libnasl: +libnasl: +libnasl: +EOF + +chmod 444 $PKG/usr/man/man?/*.? +gzip -9nf $PKG/usr/man/man?/*.? + +strip $PKG/usr/bin/* || : + +strip --strip-unneeded \ + $PKG/usr/lib/*.so* || : + +chown -R root.root $PKG + +# Make package +cd $PKG +cat install/slack-desc | grep "$NAME:" > /tmp/$NAME-$VERSION-$ARCH-$BUILD.txt +makepkg -l y -c n /tmp/$NAME-$VERSION-$ARCH-$BUILD.tgz diff --git a/libs_network/libnet/libnet.SlackBuild b/libs_network/libnet/libnet.SlackBuild new file mode 100755 index 0000000..ec618ef --- /dev/null +++ b/libs_network/libnet/libnet.SlackBuild @@ -0,0 +1,89 @@ +#!/bin/sh + +CWD=`pwd` +NAME=libnet +VERSION=1.1.1 +ARCH=i586 +BUILD=1 +PKGNAME=$NAME +PKGVER=$VERSION +BASEDIR=$PKGNAME +ARCHIVE=$BASEDIR.tar.gz +REPOSITORY=http://www.packetfactory.net/libnet/dist +FLAGS="-O2 -march=pentium -mtune=pentium -fno-strength-reduce \ + -fomit-frame-pointer -ffast-math" +PKG=/tmp/package-$NAME + +rm -rf $PKG +mkdir -p $PKG + +# Obtain sources +if [ ! -e $ARCHIVE ]; then + if `wget "$REPOSITORY/$ARCHIVE"`; then + true + else + exit 1 + fi +fi + +# Compile +cd /tmp +tar zxvf $CWD/$ARCHIVE +cd $BASEDIR +CFLAGS=$FLAGS CXXFLAGS=$FLAGS ./configure \ + --prefix=/usr +make + +# Install +make install DESTDIR=$PKG +mkdir -p $PKG/install $PKG/usr/doc/$NAME-$VERSION $PKG/usr/man/man3 \ + $PKG/usr/bin +cat > $PKG/install/slack-desc <<EOF +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +libnet: libnet +libnet: +libnet: Libnet is a high-level API (toolkit) allowing the application +libnet: programmer to construct and inject network packets. It provides a +libnet: portable and simplified interface for low-level network packet +libnet: shaping, handling and injection. Libnet hides much of the tedium of +libnet: packet creation from the application programmer such as multiplexing, +libnet: buffer management, arcane packet header information, byte-ordering, +libnet: OS-dependent issues, and much more. Libnet features portable packet +libnet: creation nterfaces at the IP layer and link layer, as well as a host +libnet: of supplementary and complementary functionality. +EOF + +install -m644 -g0 -o0 README doc/BUGS doc/CHANGELOG doc/CONTRIB doc/MIGRATION \ + doc/PACKET_BUILDING doc/RAWSOCKET_NON_SEQUITUR doc/TODO \ + $PKG/usr/doc/$NAME-$VERSION + +gzip -9nf \ + $PKG/usr/doc/$NAME-$VERSION/CHANGELOG + +mv doc/html $PKG/usr/doc/$NAME-$VERSION/libnet_docs_html + +( + cd $PKG/usr/doc/$NAME-$VERSION + tar -c libnet_docs_html > libnet_docs_html.tar + gzip -9nf libnet_docs_html.tar + rm -rf libnet_docs_html +) + +install -m0755 libnet-config $PKG/usr/bin + +install -m0444 doc/man/man3/*.3 $PKG/usr/man/man3 +gzip -9nf $PKG/usr/man/man?/*.? + +chown -R root.root $PKG + +# Make package +cd $PKG +cat install/slack-desc | grep "$NAME:" > /tmp/$NAME-$VERSION-$ARCH-$BUILD.txt +makepkg -l y -c n /tmp/$NAME-$VERSION-$ARCH-$BUILD.tgz diff --git a/libs_network/libnet/libnet10.SlackBuild b/libs_network/libnet/libnet10.SlackBuild new file mode 100755 index 0000000..e255f1c --- /dev/null +++ b/libs_network/libnet/libnet10.SlackBuild @@ -0,0 +1,89 @@ +#!/bin/sh + +CWD=`pwd` +NAME=libnet +VERSION=1.0.2a +ARCH=i586 +BUILD=1 +PKGNAME=Libnet +PKGVER=$VERSION +BASEDIR=$PKGNAME-$PKGVER +ARCHIVE=$NAME-$VERSION.tar.gz +REPOSITORY=http://www.packetfactory.net/libnet/dist/deprecated +FLAGS="-O2 -march=pentium -mtune=pentium -fno-strength-reduce \ + -fomit-frame-pointer -ffast-math" +PKG=/tmp/package-$NAME + +rm -rf $PKG +mkdir -p $PKG + +# Obtain sources +if [ ! -e $ARCHIVE ]; then + if `wget "$REPOSITORY/$ARCHIVE"`; then + true + else + exit 1 + fi +fi + +# Compile +cd /tmp +tar zxvf $CWD/$ARCHIVE +cd $BASEDIR +CFLAGS=$FLAGS CXXFLAGS=$FLAGS ./configure \ + --prefix=/usr +make + +# Install +make install DESTDIR=$PKG +mkdir -p $PKG/install $PKG/usr/doc/$NAME-$VERSION $PKG/usr/man/man3 \ + $PKG/usr/bin +cat > $PKG/install/slack-desc <<EOF +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +libnet: libnet +libnet: +libnet: Libnet is a high-level API (toolkit) allowing the application +libnet: programmer to construct and inject network packets. It provides a +libnet: portable and simplified interface for low-level network packet +libnet: shaping, handling and injection. Libnet hides much of the tedium of +libnet: packet creation from the application programmer such as multiplexing, +libnet: buffer management, arcane packet header information, byte-ordering, +libnet: OS-dependent issues, and much more. Libnet features portable packet +libnet: creation nterfaces at the IP layer and link layer, as well as a host +libnet: of supplementary and complementary functionality. +EOF + +install -m644 -g0 -o0 README doc/BUGS doc/CHANGELOG doc/CONTRIB doc/MIGRATION \ + doc/PACKET_BUILDING doc/RAWSOCKET_NON_SEQUITUR doc/TODO \ + $PKG/usr/doc/$NAME-$VERSION + +gzip -9nf \ + $PKG/usr/doc/$NAME-$VERSION/CHANGELOG + +mv doc/html $PKG/usr/doc/$NAME-$VERSION/libnet_docs_html + +( + cd $PKG/usr/doc/$NAME-$VERSION + tar -c libnet_docs_html > libnet_docs_html.tar + gzip -9nf libnet_docs_html.tar + rm -rf libnet_docs_html +) + +install -m0755 libnet-config $PKG/usr/bin + +install -m0444 doc/man/man3/*.3 $PKG/usr/man/man3 +gzip -9nf $PKG/usr/man/man?/*.? + +chown -R root.root $PKG + +# Make package +cd $PKG +cat install/slack-desc | grep "$NAME:" > /tmp/$NAME-$VERSION-$ARCH-$BUILD.txt +makepkg -l y -c n /tmp/$NAME-$VERSION-$ARCH-$BUILD.tgz diff --git a/libs_network/libnids/libnids-1.22-install.patch.bz2 b/libs_network/libnids/libnids-1.22-install.patch.bz2 Binary files differnew file mode 100644 index 0000000..ed9ab1f --- /dev/null +++ b/libs_network/libnids/libnids-1.22-install.patch.bz2 diff --git a/libs_network/libnids/libnids.SlackBuild b/libs_network/libnids/libnids.SlackBuild new file mode 100755 index 0000000..689807c --- /dev/null +++ b/libs_network/libnids/libnids.SlackBuild @@ -0,0 +1,78 @@ +#!/bin/sh + +CWD=`pwd` +NAME=libnids +VERSION=1.22 +ARCH=i586 +BUILD=1 +PKGNAME=$NAME +PKGVER=$VERSION +BASEDIR=$PKGNAME-$PKGVER +ARCHIVE=$BASEDIR.tar.gz +REPOSITORY=http://belnet.dl.sourceforge.net/sourceforge/libnids +FLAGS="-O2 -march=pentium -mtune=pentium -fno-strength-reduce \ + -fomit-frame-pointer -ffast-math" +PKG=/tmp/package-$NAME + +rm -rf $PKG +mkdir -p $PKG + +# Obtain sources +if [ ! -e $ARCHIVE ]; then + if `wget "$REPOSITORY/$ARCHIVE"`; then + true + else + exit 1 + fi +fi + +# Compile +cd /tmp +tar zxvf $CWD/$ARCHIVE +cd $BASEDIR +bzcat $CWD/$NAME-$VERSION-install.patch.bz2 | patch -p1 -s +CFLAGS=$FLAGS CXXFLAGS=$FLAGS ./configure \ + --prefix=/usr +make + +# Install +make install DESTDIR=$PKG +mkdir -p $PKG/install $PKG/usr/doc/$NAME-$VERSION +cat > $PKG/install/slack-desc <<EOF +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +libnids: libnids +libnids: +libnids: Libnids is an implementation of an E-component of Network Intrusion +libnids: Detection System. It emulates the IP stack of Linux 2.0.x. Libnids +libnids: offers IP defragmentation, TCP stream assembly and TCP port scan +libnids: detection. +libnids: +libnids: The most valuable feature of libnids is reliability. A number of +libnids: tests were conducted, which proved that libnids predicts behaviour of +libnids: protected Linux hosts as closely as possible. +libnids: +EOF + +install -m644 -g0 -o0 CHANGES CREDITS MISC README doc/API.* doc/LINUX \ + doc/PATCH doc/PERFORMANCE doc/TESTS doc/bugtraq_post \ + $PKG/usr/doc/$NAME-$VERSION + +gzip -9nf \ + $PKG/usr/doc/$NAME-$VERSION/API.* + +chmod 444 $PKG/usr/man/man?/*.? +gzip -9nf $PKG/usr/man/man?/*.? + +chown -R root.root $PKG + +# Make package +cd $PKG +cat install/slack-desc | grep "$NAME:" > /tmp/$NAME-$VERSION-$ARCH-$BUILD.txt +makepkg -l y -c n /tmp/$NAME-$VERSION-$ARCH-$BUILD.tgz diff --git a/libs_network/libnotmuch/libnotmuch.build b/libs_network/libnotmuch/libnotmuch.build new file mode 100755 index 0000000..b64b073 --- /dev/null +++ b/libs_network/libnotmuch/libnotmuch.build @@ -0,0 +1,64 @@ +#!/bin/bash +# +# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd> + +source /usr/src/ports/Build/build.sh + +NAME=libnotmuch +VERSION=0.15 +BUILD=1 +DEPENDS=('libgmime >= 2.6.15-1' 'libxapian >= 1.2.15-1') + +# Description + +cat > ${PKG}/install/slack-desc <<EOF +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + +$(padd)|-----handy-ruler------------------------------------------------------| +${NAME}: notmuch (email indexer) +${NAME}: +${NAME}: A system for indexing, searching, reading, and tagging large +${NAME}: collections of email messages in maildir or mh format. +${NAME}: +${NAME}: Homepage: http://notmuchmail.org +${NAME}: +${NAME}: +${NAME}: +${NAME}: +${NAME}: +EOF + +# Sources + +SRCNAME[0]=notmuch +SRCVERS[0]=${VERSION} +SRCPACK[0]=http://notmuchmail.org/releases/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz +SRCCOPY[0]="GPL3" + +build0() +{ +CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \ +./configure \ + --build="${ARCH}-slackware-linux" \ + --disable-dependency-tracking \ + --prefix="${SYS_DIR[usr]}" \ + --mandir="${SYS_DIR[man]}" \ + --sysconfdir="${SYS_DIR[etc]}" \ + --libdir="${SYS_DIR[lib]}" \ + --localstatedir="${SYS_DIR[var]}" \ + --bashcompletiondir="${SYS_DIR[bashcompletiondir]}" \ + --with-gmime-version="2.6" +make ${JOBS} +make install DESTDIR="${PKG}" +doc AUTHORS +changelog NEWS +chmod 0755 ${PKG}${SYS_DIR[lib]}/libnotmuch.so.?.?.? +rm -f ${PKG}${SYS_DIR[man]}/man1/notmuch-setup.1.gz +echo ".so man1/notmuch.1" > ${PKG}${SYS_DIR[man]}/man1/notmuch-setup.1 +gunzip ${PKG}${SYS_DIR[man]}/man?/*.?.gz +} diff --git a/libs_network/libntlm/libntlm-1.3-pkgconfigdir.patch.xz b/libs_network/libntlm/libntlm-1.3-pkgconfigdir.patch.xz Binary files differnew file mode 100644 index 0000000..21da0f2 --- /dev/null +++ b/libs_network/libntlm/libntlm-1.3-pkgconfigdir.patch.xz diff --git a/libs_network/libntlm/libntlm.build b/libs_network/libntlm/libntlm.build new file mode 100755 index 0000000..7ea488d --- /dev/null +++ b/libs_network/libntlm/libntlm.build @@ -0,0 +1,60 @@ +#!/bin/bash +# +# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd> + +source /usr/src/ports/Build/build.sh + +NAME=libntlm +VERSION=1.3 +BUILD=2 + +# Description + +cat > ${PKG}/install/slack-desc <<EOF +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + +$(padd)|-----handy-ruler------------------------------------------------------| +${NAME}: libntlm +${NAME}: +${NAME}: Libntlm is a library that implement Microsoft's NTLM authentication. +${NAME}: However, the packaging of libntlm lacked certain things, such as +${NAME}: having build problems, lacking shared library support, lacking +${NAME}: autoconf macro for use in other applications, lacking pkg-config +${NAME}: support, and more. +${NAME}: +${NAME}: Homepage: http://josefsson.org/libntlm +${NAME}: +${NAME}: +EOF + +# Sources + +SRCNAME[0]=${NAME} +SRCVERS[0]=${VERSION} +SRCPACK[0]=http://www.nongnu.org/${SRCNAME[0]}/releases/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz +SRCCOPY[0]="LGPL21" + +build0() +{ +CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \ +./configure \ + --build="${ARCH}-slackware-linux" \ + --disable-dependency-tracking \ + --enable-static=no \ + --enable-shared=yes \ + --prefix="${SYS_DIR[usr]}" \ + --mandir="${SYS_DIR[man]}" \ + --sysconfdir="${SYS_DIR[etc]}" \ + --libdir="${SYS_DIR[lib]}" \ + --includedir="${SYS_DIR[include]}/ntlm" \ + --localstatedir="${SYS_DIR[var]}" +make ${JOBS} +make install DESTDIR="${PKG}" +doc AUTHORS THANKS +changelog NEWS +} diff --git a/libs_network/libproxy/libproxy-0.4.11-pkgconfigdir.patch.xz b/libs_network/libproxy/libproxy-0.4.11-pkgconfigdir.patch.xz Binary files differnew file mode 100644 index 0000000..06619a5 --- /dev/null +++ b/libs_network/libproxy/libproxy-0.4.11-pkgconfigdir.patch.xz diff --git a/libs_network/libproxy/libproxy.build b/libs_network/libproxy/libproxy.build new file mode 100755 index 0000000..39240fd --- /dev/null +++ b/libs_network/libproxy/libproxy.build @@ -0,0 +1,66 @@ +#!/bin/bash +# +# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd> + +source /usr/src/ports/Build/build.sh + +NAME=libproxy +VERSION=0.4.11 +BUILD=1 + +# Description + +cat > ${PKG}/install/slack-desc <<EOF +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + +$(padd)|-----handy-ruler------------------------------------------------------| +${NAME}: libproxy +${NAME}: +${NAME}: A library that allows automatic proxy configuration management. +${NAME}: +${NAME}: Homepage: http://code.google.com/p/libproxy +${NAME}: +${NAME}: +${NAME}: +${NAME}: +${NAME}: +${NAME}: +EOF + +# Sources + +SRCNAME[0]=${NAME} +SRCVERS[0]=${VERSION} +SRCPACK[0]=http://${SRCNAME[0]}.googlecode.com/files/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz +SRCCOPY[0]="LGPL21" + +build0() +{ +cmake \ + -DCMAKE_BUILD_TYPE:STRING="Release" \ + -DCMAKE_CXX_FLAGS:STRING="${FLAGS}" \ + -DCMAKE_C_FLAGS:STRING="${FLAGS}" \ + -DCMAKE_VERBOSE_MAKEFILE:BOOL="on" \ + -DCMAKE_INSTALL_PREFIX:PATH="${SYS_DIR[usr]}" \ + -DEXEC_INSTALL_PREFIX:PATH="${SYS_DIR[usr]}" \ + -DLIB_INSTALL_DIR:PATH="${SYS_DIR[lib]}" \ + -DLIBEXEC_INSTALL_DIR:PATH="${SYS_DIR[lib]}/exec" \ + -DMODULE_INSTALL_DIR:PATH="${SYS_DIR[lib]}/plugins/${SRCNAME[0]}" \ + -DINCLUDE_INSTALL_DIR:PATH="${SYS_DIR[include]}/proxy" \ + -DWITH_GNOME3:BOOL="on" \ + -DWITH_WEBKIT3:BOOL="off" \ + -DWITH_PYTHON:BOOL="off" \ + -DWITH_DOTNET:BOOL="off" \ + -DWITH_PERL:BOOL="off" \ + -DWITH_VALA:BOOL="off" \ +CMakeLists.txt +make ${JOBS} +make install DESTDIR="${PKG}" +doc AUTHORS +changelog NEWS +} diff --git a/libs_network/libsoup/libsoup.build b/libs_network/libsoup/libsoup.build new file mode 100755 index 0000000..90ee60d --- /dev/null +++ b/libs_network/libsoup/libsoup.build @@ -0,0 +1,69 @@ +#!/bin/bash +# +# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd> + +source /usr/src/ports/Build/build.sh + +NAME=libsoup +MAJOR=2.46 +VERSION=${MAJOR}.0 +BUILD=1 +DEPENDS=('glib >= 2.38.2-1' 'libxml >= 2.9.1-1' 'sqlite >= 3.7.16.1-1') + +# Description + +cat > ${PKG}/install/slack-desc <<EOF +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + +$(padd)|-----handy-ruler------------------------------------------------------| +${NAME}: libsoup (HTTP client/server library) +${NAME}: +${NAME}: Libsoup is an HTTP client/server library. It uses GObjects and the +${NAME}: glib main loop and integrates well with GNOME and Gtk+ applications. +${NAME}: Since it is based only on glib, it can also be used in command line +${NAME}: and daemon-based applications. It features both asynchronous +${NAME}: (GMainLoop and callback-based) and synchronous APIs, automatically +${NAME}: cached connections, SSL support using GnuTLS, and proxy support +${NAME}: including authentication and SSL tunneling. Client support includes +${NAME}: Digest, NTLM, and basic authentication, and server support includes +${NAME}: Digest and Basic authentication. +EOF + +# Sources + +SRCNAME[0]=${NAME} +SRCVERS[0]=${VERSION} +SRCPACK[0]=${URL[gnome]}/${SRCNAME[0]}/${MAJOR}/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz +SRCCOPY[0]="LGPL2" + +build0() +{ +sed -i 's|$(libdir)/pkgconfig|$(datarootdir)/pkgconfig|g' Makefile.in +CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \ +./configure \ + --build="${ARCH}-slackware-linux" \ + --disable-dependency-tracking \ + --disable-silent-rules \ + --enable-static=no \ + --enable-shared=yes \ + --enable-introspection=no \ + --enable-debug=minimum \ + --prefix="${SYS_DIR[usr]}" \ + --mandir="${SYS_DIR[man]}" \ + --sysconfdir="${SYS_DIR[etc]}" \ + --libdir="${SYS_DIR[lib]}" \ + --localstatedir="${SYS_DIR[var]}" \ + --with-html-dir="${SYS_DIR[html]}" +#FIXME: gstreamer still requires libsoup-gnome (--without-gnome) +make ${JOBS} V=1 +make install DESTDIR="${PKG}" +doc AUTHORS +changelog NEWS +# No development docs +rm -rf ${PKG}${SYS_DIR[html]} +} diff --git a/libs_network/libssh2/libssh2-1.4.3-pkgconfigdir.patch.xz b/libs_network/libssh2/libssh2-1.4.3-pkgconfigdir.patch.xz Binary files differnew file mode 100644 index 0000000..4e6840b --- /dev/null +++ b/libs_network/libssh2/libssh2-1.4.3-pkgconfigdir.patch.xz diff --git a/libs_network/libssh2/libssh2.build b/libs_network/libssh2/libssh2.build new file mode 100755 index 0000000..89b5e16 --- /dev/null +++ b/libs_network/libssh2/libssh2.build @@ -0,0 +1,65 @@ +#!/bin/bash +# +# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd> + +source /usr/src/ports/Build/build.sh + +NAME=libssh2 +VERSION=1.4.3 +BUILD=2 +DEPENDS=('libgcrypt >= 1.5.0-1') + +# Description + +cat > ${PKG}/install/slack-desc <<EOF +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + +$(padd)|-----handy-ruler------------------------------------------------------| +${NAME}: libssh2 +${NAME}: +${NAME}: A client-side C library implementing the SSH2 protocol. +${NAME}: +${NAME}: Homepage: http://www.libssh2.org +${NAME}: +${NAME}: +${NAME}: +${NAME}: +${NAME}: +${NAME}: +EOF + +# Sources + +SRCNAME[0]=${NAME} +SRCVERS[0]=${VERSION} +SRCPACK[0]=http://www.libssh2.org/download/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz +SRCCOPY[0]="BSD" + +build0() +{ +CPPFLAGS="-I${SYS_DIR[include]}/gpg-error -I${SYS_DIR[include]}/gcrypt" \ +CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \ +./configure \ + --build="${ARCH}-slackware-linux" \ + --disable-dependency-tracking \ + --disable-rpath \ + --enable-static=no \ + --enable-shared=yes \ + --prefix="${SYS_DIR[usr]}" \ + --mandir="${SYS_DIR[man]}" \ + --sysconfdir="${SYS_DIR[etc]}" \ + --libdir="${SYS_DIR[lib]}" \ + --includedir="${SYS_DIR[include]}/ssh2" \ + --localstatedir="${SYS_DIR[var]}" \ + --with-libgcrypt \ + --with-libz +make ${JOBS} +make install DESTDIR="${PKG}" +doc AUTHORS RELEASE-NOTES +changelog NEWS +} diff --git a/libs_network/libvnc/LibVNCServer-0.9.9-pkgconfigdir.patch.xz b/libs_network/libvnc/LibVNCServer-0.9.9-pkgconfigdir.patch.xz Binary files differnew file mode 100644 index 0000000..591a14b --- /dev/null +++ b/libs_network/libvnc/LibVNCServer-0.9.9-pkgconfigdir.patch.xz diff --git a/libs_network/libvnc/libvnc.build b/libs_network/libvnc/libvnc.build new file mode 100755 index 0000000..5599b6d --- /dev/null +++ b/libs_network/libvnc/libvnc.build @@ -0,0 +1,68 @@ +#!/bin/bash +# +# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd> + +source /usr/src/ports/Build/build.sh + +NAME=libvnc +VERSION=0.9.9 +BUILD=1 +DEPENDS=('gnutls >= 3.1.6-1' 'libjpeg >= 1.2.1-1') + +# Description + +cat > ${PKG}/install/slack-desc <<EOF +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + +$(padd)|-----handy-ruler------------------------------------------------------| +${NAME}: libvnc (VNC client and server libraries) +${NAME}: +${NAME}: VNC (Virtual Network Computing) is a graphical desktop sharing +${NAME}: system that uses the RFB protocol to remotely control another +${NAME}: computer. It transmits the keyboard and mouse events from one +${NAME}: computer to another, relaying the graphical screen updates back in +${NAME}: the other direction, over a network. +${NAME}: +${NAME}: Homepage: http://libvncserver.sourceforge.net +${NAME}: +${NAME}: +EOF + +# Sources + +SRCNAME[0]=LibVNCServer +SRCVERS[0]=${VERSION} +SRCPACK[0]=${URL[sf]}/libvncserver/${SRCNAME[0]}/${SRCVERS[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz +SRCCOPY[0]="GPL2" + +build0() +{ +CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \ +./configure \ + --build="${ARCH}-slackware-linux" \ + --disable-dependency-tracking \ + --disable-silent-rules \ + --enable-static=no \ + --enable-shared=yes \ + --prefix="${SYS_DIR[usr]}" \ + --mandir="${SYS_DIR[man]}" \ + --sysconfdir="${SYS_DIR[etc]}" \ + --libdir="${SYS_DIR[lib]}" \ + --localstatedir="${SYS_DIR[var]}" \ + --without-ssl \ + --without-crypto \ + --with-zlib="${SYS_DIR[usr]}" \ + --with-jpeg="${SYS_DIR[usr]}" \ + --with-png="${SYS_DIR[usr]}" \ + --with-avahi="${SYS_DIR[usr]}" \ + --with-gnutls="${SYS_DIR[usr]}" +make ${JOBS} V=1 +make install DESTDIR="${PKG}" +doc AUTHORS +changelog NEWS +} diff --git a/libs_network/miniupnpc/miniupnpc-1.8.20130211-cmake.patch.xz b/libs_network/miniupnpc/miniupnpc-1.8.20130211-cmake.patch.xz Binary files differnew file mode 100644 index 0000000..fd2fabb --- /dev/null +++ b/libs_network/miniupnpc/miniupnpc-1.8.20130211-cmake.patch.xz diff --git a/libs_network/miniupnpc/miniupnpc.build b/libs_network/miniupnpc/miniupnpc.build new file mode 100755 index 0000000..164f98c --- /dev/null +++ b/libs_network/miniupnpc/miniupnpc.build @@ -0,0 +1,59 @@ +#!/bin/bash +# +# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd> + +source /usr/src/ports/Build/build.sh + +NAME=miniupnpc +VERSION=1.8.20130211 +BUILD=1 + +# Description + +cat > ${PKG}/install/slack-desc <<EOF +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + +$(padd)|-----handy-ruler------------------------------------------------------| +${NAME}: miniupnpc (UPnP NAT traversal client library) +${NAME}: +${NAME}: This library allows TCP/IP programs which use it to perform Network +${NAME}: Address Translation (NAT) traversal through the UPnP protocol. +${NAME}: +${NAME}: It was written by Thomas Bernard. +${NAME}: +${NAME}: Homepage: http://miniupnp.free.fr +${NAME}: +${NAME}: +${NAME}: +EOF + +# Sources + +SRCNAME[0]=${NAME} +SRCVERS[0]=${VERSION} +SRCPACK[0]=http://miniupnp.free.fr/files/download.php?file=${SRCNAME[0]}-${SRCVERS[0]}.tar.gz +SRCCOPY[0]="BSD3" + +build0() +{ +cmake \ +-DCMAKE_CXX_FLAGS:STRING="${FLAGS}" \ +-DCMAKE_C_FLAGS:STRING="${FLAGS}" \ +-DCMAKE_VERBOSE_MAKEFILE:BOOL="on" \ +-DCMAKE_INSTALL_PREFIX:PATH="${SYS_DIR[usr]}" \ +-DEXEC_INSTALL_PREFIX:PATH="${SYS_DIR[usr]}" \ +-DBIN_INSTALL_DIR:PATH="${SYS_DIR[bin]}" \ +-DINCLUDE_INSTALL_DIR:PATH="${SYS_DIR[include]}" \ +-DLIB_INSTALL_DIR:PATH="${SYS_DIR[lib]}" \ +-DUPNPC_BUILD_STATIC:BOOL="off" \ +-DUPNPC_BUILD_TESTS:BOOL="off" \ +CMakeLists.txt +make ${JOBS} +make install DESTDIR="${PKG}" +changelog ChangeLog.txt +} diff --git a/libs_network/neon/neon-0.29.6-gnutls3backport.patch.xz b/libs_network/neon/neon-0.29.6-gnutls3backport.patch.xz Binary files differnew file mode 100644 index 0000000..77f7276 --- /dev/null +++ b/libs_network/neon/neon-0.29.6-gnutls3backport.patch.xz diff --git a/libs_network/neon/neon-0.29.6-gnutls3functions.patch.xz b/libs_network/neon/neon-0.29.6-gnutls3functions.patch.xz Binary files differnew file mode 100644 index 0000000..2a23859 --- /dev/null +++ b/libs_network/neon/neon-0.29.6-gnutls3functions.patch.xz diff --git a/libs_network/neon/neon-0.29.6-gnutls3types.patch.xz b/libs_network/neon/neon-0.29.6-gnutls3types.patch.xz Binary files differnew file mode 100644 index 0000000..3d9d9fa --- /dev/null +++ b/libs_network/neon/neon-0.29.6-gnutls3types.patch.xz diff --git a/libs_network/neon/neon-0.29.6-htmldir.patch.xz b/libs_network/neon/neon-0.29.6-htmldir.patch.xz Binary files differnew file mode 100644 index 0000000..ffb54f1 --- /dev/null +++ b/libs_network/neon/neon-0.29.6-htmldir.patch.xz diff --git a/libs_network/neon/neon.build b/libs_network/neon/neon.build new file mode 100755 index 0000000..c0924ce --- /dev/null +++ b/libs_network/neon/neon.build @@ -0,0 +1,67 @@ +#!/bin/bash +# +# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd> + +source /usr/src/ports/Build/build.sh + +NAME=neon +VERSION=0.29.6 +BUILD=2 +DEPENDS=('gnutls >= 3.1.6-1' 'libxml >= 2.9.0-1' 'libproxy >= 0.4.11-1') + +# Description + +cat > ${PKG}/install/slack-desc <<EOF +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + +$(padd)|-----handy-ruler------------------------------------------------------| +${NAME}: neon +${NAME}: +${NAME}: An HTTP and WebDAV client library. +${NAME}: +${NAME}: Homepage: http://www.webdav.org/neon +${NAME}: +${NAME}: +${NAME}: +${NAME}: +${NAME}: +${NAME}: +EOF + +# Sources + +SRCNAME[0]=${NAME} +SRCVERS[0]=${VERSION} +SRCPACK[0]=http://www.webdav.org/${SRCNAME[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.gz +SRCCOPY[0]="LGPL2" + +build0() +{ +sed -i 's|$(libdir)/pkgconfig|$(prefix)/share/pkgconfig|g' Makefile.in +CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \ +./configure \ + --build="${ARCH}-slackware-linux" \ + --enable-static=no \ + --enable-shared=yes \ + --prefix="${SYS_DIR[usr]}" \ + --mandir="${SYS_DIR[man]}" \ + --docdir="${SYS_DIR[html]}" \ + --sysconfdir="${SYS_DIR[etc]}" \ + --libdir="${SYS_DIR[lib]}" \ + --localstatedir="${SYS_DIR[var]}" \ + --with-ssl=gnutls \ + --with-libxml2 \ + --with-ca-bundle="${SYS_DIR[etc]}/ssl/certs/ca-certificates.crt" \ + --enable-threadsafe-ssl=posix +make ${JOBS} +make install DESTDIR="${PKG}" +doc AUTHORS THANKS +changelog NEWS +# No development docs +rm -rf ${PKG}${SYS_DIR[html]} +} diff --git a/libs_network/nessus_libs/nessus_libs.SlackBuild b/libs_network/nessus_libs/nessus_libs.SlackBuild new file mode 100755 index 0000000..f47a4fd --- /dev/null +++ b/libs_network/nessus_libs/nessus_libs.SlackBuild @@ -0,0 +1,79 @@ +#!/bin/sh + +CWD=`pwd` +NAME=nessus_libs +VERSION=2.3.1 +ARCH=i586 +BUILD=1 +PKGNAME=nessus-libraries +PKGVER=$VERSION +BASEDIR=$PKGNAME +ARCHIVE=$PKGNAME-$PKGVER.tar.gz +REPOSITORY=http://no/where +FLAGS="-O2 -march=pentium -mtune=pentium -fno-strength-reduce \ + -fomit-frame-pointer -ffast-math" +PKG=/tmp/package-$NAME + +rm -rf $PKG +mkdir -p $PKG + +# Obtain sources +if [ ! -e $ARCHIVE ]; then + if `wget "$REPOSITORY/$ARCHIVE"`; then + true + else + exit 1 + fi +fi + +# Compile +cd /tmp +tar zxvf $CWD/$ARCHIVE +cd $BASEDIR +CFLAGS=$FLAGS CXXFLAGS=$FLAGS ./configure \ + --enable-static=no \ + --prefix=/usr \ + --mandir=/usr/man \ + --sysconfdir=/etc/nessus \ + --enable-cypher +make + +# Install +make install DESTDIR=$PKG +mkdir -p $PKG/install +cat > $PKG/install/slack-desc <<EOF +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +nessus_libs: Nessus libraries +nessus_libs: +nessus_libs: The "Nessus" Project was started by Renaud Deraison in 1998 to +nessus_libs: provide to the internet community a free, powerful, up-to-date and +nessus_libs: easy to use remote security scanner. Nessus is currently rated among +nessus_libs: the top products of its type throughout the security industry and is +nessus_libs: endorsed by professional information security organizations such as +nessus_libs: the SANS Institute. It is estimated that the Nessus scanner is used +nessus_libs: by 75,000 organizations world-wide. +nessus_libs: +nessus_libs: +EOF + +chmod 444 $PKG/usr/man/man?/*.? +gzip -9nf $PKG/usr/man/man?/*.? + +strip --strip-unneeded \ + $PKG/usr/lib/*.so* || : + +rm -rf $PKG/usr/sbin + +chown -R root.root $PKG + +# Make package +cd $PKG +cat install/slack-desc | grep "$NAME:" > /tmp/$NAME-$VERSION-$ARCH-$BUILD.txt +makepkg -l y -c n /tmp/$NAME-$VERSION-$ARCH-$BUILD.tgz diff --git a/libs_network/openobex/openobex.SlackBuild b/libs_network/openobex/openobex.SlackBuild new file mode 100755 index 0000000..3778551 --- /dev/null +++ b/libs_network/openobex/openobex.SlackBuild @@ -0,0 +1,79 @@ +#!/bin/sh + +CWD=`pwd` +NAME=openobex +VERSION=1.3 +ARCH=i586 +BUILD=1 +PKGNAME=$NAME +PKGVER=$VERSION +BASEDIR=$PKGNAME-$PKGVER +ARCHIVE=$BASEDIR.tar.bz2 +REPOSITORY=http://belnet.dl.sourceforge.net/sourceforge/openobex +FLAGS="-O2 -march=pentium -mtune=pentium -fno-strength-reduce \ + -fomit-frame-pointer -ffast-math" +PKG=/tmp/package-$NAME + +rm -rf $PKG +mkdir -p $PKG + +# Obtain sources +if [ ! -e $ARCHIVE ]; then + if `wget "$REPOSITORY/$ARCHIVE"`; then + true + else + exit 1 + fi +fi + +# Compile +cd /tmp +tar jxvf $CWD/$ARCHIVE +cd $BASEDIR +CFLAGS=$FLAGS CXXFLAGS=$FLAGS ./configure \ + --enable-static=no \ + --prefix=/usr \ + --sysconfdir=/etc \ + --mandir=/usr/man \ + --enable-apps +make + +# Install +make install DESTDIR=$PKG +mkdir -p $PKG/install $PKG/usr/doc/$NAME-$VERSION +cat > $PKG/install/slack-desc <<EOF +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +openobex: openobex (Object Exchange protocol library) +openobex: +openobex: OpenOBEX is a free open source implementation of the Object Exchange +openobex: (OBEX) protocol. OBEX is a session protocol and can best be +openobex: described as a binary HTTP protocol. OBEX is optimised for ad-hoc +openobex: wireless links and can be used to exchange all kinds of objects like +openobex: files, pictures, calendar entries (vCal) and business cards (vCard). +openobex: +openobex: Visit the project here: http://www.openobex.org +openobex: +openobex: +EOF + +install -m644 -g0 -o0 AUTHORS ChangeLog README \ + $PKG/usr/doc/$NAME-$VERSION + +strip --strip-unneeded \ + $PKG/usr/lib/*.so* || : + +strip $PKG/usr/bin/* || : + +chown -R root.root $PKG + +# Make package +cd $PKG +cat install/slack-desc | grep "$NAME:" > /tmp/$NAME-$VERSION-$ARCH-$BUILD.txt +makepkg -l y -c n /tmp/$NAME-$VERSION-$ARCH-$BUILD.tgz diff --git a/libs_network/silc/silc-1.0-nodebug.patch.bz2 b/libs_network/silc/silc-1.0-nodebug.patch.bz2 Binary files differnew file mode 100644 index 0000000..2e8f95b --- /dev/null +++ b/libs_network/silc/silc-1.0-nodebug.patch.bz2 diff --git a/libs_network/silc/silc.SlackBuild b/libs_network/silc/silc.SlackBuild new file mode 100755 index 0000000..9a83c91 --- /dev/null +++ b/libs_network/silc/silc.SlackBuild @@ -0,0 +1,93 @@ +#!/bin/sh + +CWD=`pwd` +NAME=silc +VERSION=1.0 +ARCH=i586 +BUILD=1 +PKGNAME=$NAME +PKGVER=$VERSION +BASEDIR=$PKGNAME-toolkit-$PKGVER +ARCHIVE=$BASEDIR.tar.bz2 +REPOSITORY=ftp://ftp.silcnet.org/silc/toolkit/sources +FLAGS="-O2 -march=pentium -mcpu=pentium -fno-strength-reduce \ + -fomit-frame-pointer -ffast-math" +PKG=/tmp/package-$NAME + +rm -rf $PKG +mkdir -p $PKG + +# Obtain sources +if [ ! -e $ARCHIVE ]; then + if `wget "$REPOSITORY/$ARCHIVE"`; then + true + else + exit 1 + fi +fi + +# Compile +cd /tmp +tar jxvf $CWD/$ARCHIVE +cd $BASEDIR +bzcat $CWD/$NAME-$VERSION-nodebug.patch.bz2 | patch -p1 -s +CFLAGS=$FLAGS CXXFLAGS=$FLAGS ./configure --prefix=/usr --enable-ipv6 \ + --with-perl=no --disable-debug --with-simdir=/usr/libexec/silc \ + --with-docdir=/usr/doc/silc-$VERSION --includedir=/usr/include/silc +make + +# Install +make install DESTDIR=$PKG +mkdir -p $PKG/install $PKG/usr/doc/$NAME-$VERSION +cat > $PKG/install/slack-desc <<EOF +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +silc: SILC (Secure Internet Live Conferencing) +silc: +silc: Secure Internet Live Conferencing, or SILC in short, is a modern +silc: conferencing protocol which provides rich conferencing features with +silc: high security. One of the main design principles of the protocol was +silc: security. Many of the SILC features are found in traditional chat +silc: protocols such as IRC but many of the SILC features can also be +silc: found in Instant Message (IM) style protocols. +silc: +silc: This package provides the SILC toolkit. +silc: +EOF + +rm -f \ + $PKG/usr/doc/$NAME-$VERSION/BSD \ + $PKG/usr/doc/$NAME-$VERSION/COPYING \ + $PKG/usr/doc/$NAME-$VERSION/CodingStyle \ + $PKG/usr/doc/$NAME-$VERSION/GPL \ + $PKG/usr/doc/$NAME-$VERSION/INSTALL \ + $PKG/usr/doc/$NAME-$VERSION/README.* + +gzip -9nf \ + $PKG/usr/doc/$NAME-$VERSION/*.txt \ + $PKG/usr/doc/$NAME-$VERSION/CHANGES \ + $PKG/usr/doc/$NAME-$VERSION/FAQ + +( + cd $PKG/usr/doc/$NAME-$VERSION + mv toolkit silc_docs_html + tar -c silc_docs_html > silc_docs_html.tar + gzip -9nf silc_docs_html.tar + rm -rf silc_docs_html + rm -rf tutorial +) + +strip --strip-unneeded $PKG/usr/libexec/silc/*.so ||: + +chown -R root.root $PKG + +# Make package +cd $PKG +cat install/slack-desc | grep "$NAME:" > /tmp/$NAME-$VERSION-$ARCH-$BUILD.txt +makepkg -l y -c n /tmp/$NAME-$VERSION-$ARCH-$BUILD.tgz |