Add ports.

1 files changed, 124 insertions, 0 deletions

diff --git a/base/fs_ext/fs_ext.build b/base/fs_ext/fs_ext.build
new file mode 100755
index 0000000..fc05ed8
--- /dev/null
+++ b/base/fs_ext/fs_ext.build
@@ -0,0 +1,124 @@
+#!/bin/bash
+#
+# Maintainer: Deposite Pirate <ofni.sknuplatem@etaripd>
+
+source /usr/src/ports/Build/build.sh
+
+NAME=fs_ext
+VERSION=1.42.7
+BUILD=1
+OPTIONS="noinfoz"
+
+# Description
+
+cat > ${PKG}/install/slack-desc <<EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$(padd)|-----handy-ruler------------------------------------------------------|
+${NAME}: fs_ext (extended filesystems utilities)
+${NAME}:
+${NAME}: Utilities needed to create and maintain ext2, ext3 and ext4
+${NAME}: filesystems.
+${NAME}:
+${NAME}: These utilities were written by Remy Card (the developer and
+${NAME}: maintainer of the ext2 fs) and Theodore T'so.
+${NAME}:
+${NAME}:
+${NAME}:
+${NAME}:
+EOF
+
+cat >> ${PKG}/install/doinst.sh <<EOF
+#!/bin/sh
+
+config() {
+  NEW="\$1"
+  OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r \$OLD ]; then
+    mv \$NEW \$OLD
+  elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm \$NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+install_info()
+{
+  for file in "\${*}"; do
+    if [ -x usr/bin/install-info ]; then
+      usr/bin/install-info --info-dir=usr/share/info usr/share/info/\${file}.info.xz 2> /dev/null
+    fi
+  done
+}
+
+config etc/mke2fs.conf.new
+
+# Install texinfo files
+
+install_info libext2fs
+EOF
+
+# Sources
+
+SRCNAME[0]=e2fsprogs
+SRCVERS[0]=${VERSION}
+SRCPACK[0]=http://kernel.org/pub/linux/kernel/people/tytso/e2fsprogs/v${SRCVERS[0]}/${SRCNAME[0]}-${SRCVERS[0]}.tar.xz
+SRCCOPY[0]="GPL2 LGPL2"
+
+build0()
+{
+sed -i 's|$(libdir)/pkgconfig|$(datadir)/pkgconfig|g' */*/Makefile.in
+CFLAGS="${FLAGS}" CXXFLAGS="${FLAGS}" \
+./configure \
+ --build="${ARCH}-slackware-linux" \
+ --disable-rpath \
+ --prefix="${SYS_DIR[usr]}" \
+ --mandir="${SYS_DIR[man]}" \
+ --infodir="${SYS_DIR[info]}" \
+ --docdir="${SYS_DIR[doc]}/${SRCNAME[0]}-${SRCVERS[0]}" \
+ --sysconfdir="${SYS_DIR[etc]}" \
+ --libdir="${SYS_DIR[lib]}" \
+ --localstatedir="${SYS_DIR[var]}" \
+ --enable-elf-shlibs \
+ --disable-libblkid \
+ --disable-libuuid \
+ --disable-uuidd
+make ${JOBS} V=1
+make install install-libs DESTDIR="${PKG}"
+changelog RELEASE-NOTES
+mv \
+ ${PKG}${SYS_DIR[etc]}/mke2fs.conf \
+ ${PKG}${SYS_DIR[etc]}/mke2fs.conf.new
+(
+  for fstype in ext2 ext3 ext4 ext4dev; do
+    cd ${PKG}${SYS_DIR[sbin]}
+    rm -f fsck.${fstype} mkfs.${fstype}
+    ln -sf mke2fs mkfs.${fstype}
+    ln -sf e2fsck fsck.${fstype}
+    cd ${PKG}${SYS_DIR[man]}/man8
+    rm -f fsck.${fstype} mkfs.${fstype}
+    echo ".so man8/mke2fs.8" > mkfs.${fstype}
+    echo ".so man8/e2fsck.8" > fsck.${fstype}
+  done
+)
+(
+  cd ${PKG}${SYS_DIR[sbin]}
+  rm -f e2label findfs
+  ln -sf tune2fs e2label
+  ln -sf mke2fs mke3fs
+  ln -sf mke2fs mke4fs
+  cd ${PKG}${SYS_DIR[man]}/man8
+  echo ".so man8/mke2fs.8" > mke3fs.8
+  echo ".so man8/mke2fs.8" > mke4fs.8
+)
+sed -i -e 's/^AWK=.*/AWK=awk/' "${PKG}/usr/bin/compile_et"
+sed -i -e 's#^SS_DIR=.*#SS_DIR="/usr/share/ss"#' "${PKG}/usr/bin/mk_cmds"
+sed -i -e 's#^ET_DIR=.*#ET_DIR="/usr/share/et"#' "${PKG}/usr/bin/compile_et"
+}